Its annoying to unmount my flash drive twice.. its not a major problem actually but its kinda annoying , its whenever i plug-in my flash drive.. everything works well except when i need to un-mount it.. I usually unmount it twice using right-click of the mouse, then it mounts itself back, so i have to unmount it again.. Is there any way to control this? How do i setup the auto-mount option for USB flash drives?
View 1 Repliesso i used to have my harddrive mounted in fstab, to /mnt/diskS. than i decided to change the permissions to 766 global i believe i read somewhere with chmod. anyways so after that i checked to see if it worked and to my dis believe all my files are gone. or just arnt showing, the space taken up hasnt decreased but i just cant see any of my files. so i decided to take the harddrive out of fstab and restart my computer. and after restart when i click on the folder the harddrive is mounted in it says permissions belong to 1000?
View 1 Replies View RelatedMy Fedora does not auto detect a flash drive if I get to attach it with the OS already running. I still have to make a reboot and attached the drive right from the start in order for it to be detected/mounted.
Unlike In Mint 7, Ubuntu and XP, it automatically detects the flash drive as soon as it is attached.
make my Fedora detect the flash drive so that I would not have to reboot everytime I would use it.
FWIW here are some outputs:
Code: # /etc/fstab
# Created by anaconda on Thu Feb 4 06:06:47 2010
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
[code].....
I had to unmount a flash drive in GParted to format it, now I want to mount it again so I can use it, GParted does not get me a "mount" option and it does not automatically mount. How do I mount it so I can use it to make a Fedora Live USB? I am using Fedora 14 KDE BTW...
View 6 Replies View Relatedwhy i cant mount any network folders. when i when i was going through this forum, [URL] i got stuck on the first step.
smbclient -L //10.1.1.3 (insert your windows machine ip instead)
i get this error.
bob@bob-ubuntu:~$ smbclient -L //192.26.92.21
Enter bob's password:
signing_good: BAD SIG: seq 1
session setup failed: NT_STATUS_OK
bob@bob-ubuntu:~$
i am using ubuntu 9.10 64 bit.
Having a problem mounting a flash drive on slackware 13.0
tried using command: mount /dev/sdb1 /mnt/hd
Geting an error special device does not exist. sda1 is my hdd, also tried sdc sdd
i bought i 32gb transcend flashdrive mainly to t0 another os.. but the problem is it doesnt mount in ubuntu 10.10 but is mounts in windows. when i type lsusb in my terminal after inserting ang again after removing it i see that there is one usb device which is shown when flash drive is inserted and dissapears when i remove my flash drive
View 9 Replies View RelatedI wish to gain access to a USB flash drive. It is old and I forget how small. Could somebody give me insight into a way to mount it if the security code isn't letting me access it via /dev/sdx?
Code:
I have been using Linux for a while but I am more used to Debian based distributions. With distributions like Ubuntu, I have been able to get my flash drives to work instantly. However, I have no idea how to mount one in OpenSuse. I do not have much experience in configuring stuff like this because distros usually do this for me.
View 1 Replies View RelatedI've found some older threads with the same problem and read a few bug reports also. Nobody has a solution that has worked for me.How can I get Ubuntu 10.10 to be able to use something as basic as a usb drive?
View 5 Replies View RelatedI have Mandriva 08 and I can't get a MP3 player or a Flash Drive to mount. If I manually mount the Flash drive the "Computer File" won't create a file so I can access it. I get no desktop icons and I have checked the box in "config-whatever", The Flash Drive will appear in HardDrake but the MP3 player will not. The MP3 player will appear in the "Computer File" but will not manually mount.
View 2 Replies View RelatedUsb flash drive mount point not found.
see screenshot.
I recently upgraded to Gnome 2.30 and now usb drives don't auto-mount and show-up in Nautilus as a device.
I can mount the drive manually, but it would be nice if this happened automatically when I plugged it in.
I'd like to make regular backups of my flash drives, but I don't plug them in regularly. Because of this, I can't just use a scheduled backup application to back them up. Does anyone know of an incremental backup application that will automatically run backups on media as soon as it's mounted?
View 1 Replies View RelatedI am trying to setup my ubuntu machine to automatically log some data I am trying to collect and write the data to a flash drive. I have everything setup so that when the machine boots up it starts that logging process. The problem I am having is that sometimes (not always) ubuntu creates a directory with the same path that I expect my flash drive to mount to i.e., /media/data/ then my flash drive instead mounts to /media/data_/. I need to know the path of the flash drive so I can store my data on it.
View 2 Replies View RelatedI'm a NOOB to CentOS and Linux in general. I've been trying to find a way to mount my USB flash drive (FAT32) so I can see my files. I've been told that I need to add a USB controller. My CentOS is running as a VMWARE guest in WS7 loaded on a Vista host. My physical hardware is a Toshiba Satellite notebook. I've been told I have to add a USB controller before I can mount. Can anybody give me some direction with this?
View 5 Replies View RelatedI have two questions regarding auto mount function of Truecrypt. First question:
I want to automatically mount my flash drive encrypted by Truecrypt using a keyfile whenever I plug the drive. How can I do this? I use Ubuntu 10.10.
Second question:
As I do not know the answer of my first question, I currently use following command in a startup script to mount my encrypted flash drive automatically at every system start-up.
Quote:
/usr/bin/truecrypt -k ~/keyfile --auto-mount=favorites
My problem with this method is, Truecrypt always search for the drive in the same path saved in favorite drives list, e.g. /dev/sdb1. However sometimes there are more than one flash drive plugged to my computer and my encrypted drive's path changes. In such cases Truecrypt cannot mount my encrypted drive because it cannot find the drive in its path.
As a workaround I tried "auto-mount=devices" parameter. It is slow because it checks every mounted drive, and some of them external hard disk big in size. Moreover it does not recognize any mount point parameter. I'd like to mount the drive to the same mount point every time.
Quote:
/usr/bin/truecrypt -t --auto-mount=devices -p "" -k ~/keyfile /media/MyMountPoint
The command above mounts the drive however it is slow and to the destination of "/media/treucrypt1".
Also I have all files it asks for installed including dostools..Btw I used usb creator, then went to gparted and did something. The system is fat 32 now but with same message, not including ext4 part. Just the mount point message, and something about dosftools and mtools, wihich also are installed.
View 4 Replies View RelatedHow do I configure my Debian installation to mount external USB drives to mount points based on the volume names of the drives? For instance, if I have a thumb drive with the volume name of "SWORDFISH," how do I have Linux mount it at /media/SWORDFISH? I'm aware that this can be setup in FSTAB, but that requires that I know the UUID of the device beforehand and that I take the time to set each external device up in FSTAB first. That does nothing for me when I have a thumb drive that has never been plugged into my computer before.
This seems to be setup by default in Ubuntu/Kubuntu, but is not working for me with a fresh installation of Debian Squeeze and KDE4. I've spent the past 2 hours Googling for a solution and have turned up nothing. UPDATE: My results are inconsistent. Sometimes Debian mounts devices to mount points based on the volume names, and other times it gives them generic mount points (e.g. /media/usb1).
I run a headless Ubuntu 8.04 server, which acts as a web, email and file server. I am sticking with 8.04 as it is a LTS release and will upgrade to the next LTS when it is released.
I have two external USB drives, that I need to mount at boot. I have been using /etc/fstab up until now, with the following entries:
Code:
However, as I gather from doing searches is quite common, occasionally I get an error during boot (causing the system to drop to a recovery shell) because the USB drives take time to wake up and the system hasn't found them by the time it reads /etc/fstab.
From doing searches, it seems there is nothing you can do to fstab to fix this, so you need to mount them using an rc.local script instead, using:
Code:
The problem is, as I have two USB drives, their /dev/sdxx location changes between boots. I thus want to use UUID codes as I do in fstab, however I haven't found anything about this.
Does anyone know how I can use the mount command and UUID to mount a drive in rc.local and what options I have to use the mount the drive with the same options that I am using in my fstab entry? Obvisouly, I can't refer back to fstab using the mount command, because then I will still get the boot error issue if they are listed in fstab. And there is no space internally for the USB drives as there is already two internal drives.
Not able to mount windows drive & foder, in linux. i have got following error.
mount error 92 = Protocol not available
I always have a problem in simple user mode when I insert a USB key. Can't mount, can't open with file manager. I'm obliged to open a simultaneous root session, to do what I want to manage the usb key.
In my user manager, I don't know wich group I have to add to this simple user (it's me) so I am allowed to manage the usb key.
I have servers installed with RHEL 4 2.6.9-89.0.9 ELsmp. I tried using uuid and label in /etc/fstab to automount usb drives to mountpoints that I specify after reboot. Unfortunately, it just does not work in all my RHEL4 servers. After every reboot, /etc/fstab will be automatically modified and all configurations related to my USB drives will be changed. Irregardless of whether i use UUID or LABEL in my /etc/fstab.However, it works on RHEL5. But, upgrading is not an option in my environment. I have been googling around looking for alternatives but everything seems to point back to using UUID or LABEL in /etc/fstab. Anyone has tried something that works? Please help me, thank you.
View 7 Replies View RelatedI have 2 internal drives. One is for the OS and one is for the Data. I tried to get the Data drive to mount automatically at login using some crap I found on a linux blog. Safe to say it didn't work and now I can't mount it with the OS on the OS Drive.
It mounts from a live CD and all the data is perfectly safe. When I try to mount the drive I get this error message: "Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/data" What have I done wrong and how can I make it mount again? Preferably this time at login.
I have been trying to share folders from my main PC which is running Ubuntu 10.04. I have been able to figure out Samba enough to get my a couple of folders shared, but I have been unable to share any folders which are on my external harddrive. After entering the path in my smb.conf file they appear on the network but I am unable to navigate to them. When trying to navigate to them through the network folder on the pc they are actually connected to I get an "Unable to mount location: Failed to mount windows share" dialog box. On the windows pc I am trying to share with I get, "Windows cannot acces \Josh-Desktop
ame of folder"
My smb.conf file looks like this:
That folders I cannot access are Music and Videos.
Running Fedora 13 x64 and I have an ipod touch 3rd gen plugged in via usb. Fedora does not mount or see it at all. I have gtkpod, ifuse, ipod-sharp, libgpod.. nothing seems to find it. Is there something I should be doing?
View 2 Replies View RelatedIt mounts sometimes, sometimes it doesn't ! what could be the problem ? i have tried mounting it manually but no success.
View 5 Replies View RelatedEver since I started using KDE as in 4.2, I have been doing this regularly. When I startup KDE, I open Dolphin and click and mount each partition with root pass. I thought it might be some KDE issue as is the ever developing code and will be fine in future updates. But now I'm in 4.2.1 and it still exists. Upon inquiring fellow users on other distros, I have come to believe this is a *Fedora only* issue now. [URL].
View 8 Replies View RelatedNew install of Fedora 14, all updates applied. If a USB flash drive is plugged in, get a Not Authorized message when Nautilus tries to mount the drive. The drive does show up in Places in Nautilus. From a terminal window, if you 'su' to 'root', then:
mkdir /mnt/usb
fdisk -lu
mount -t vfat /dev/sdb1 /mnt/usb
WILL mount the device, can 'cd' into directories, 'ls' to list files, 'cat' the files -- all OK -- so the device itself is fine. But from a regular user account, it will not mount the drive. Did 'chown' on /mnt/usb and /dev/sdb1 so that the user owns everything. The same 'mount' command as above gives the message "mount: only root can do that". Disabled SELinux as a test -- same result. Searched around but only similar problem was in this thread (buried in the middle): [URL] That's where the sequence above was suggested, which does work as 'root'. Where else would permissions need to be set? And what changed? This worked automatically in previous versions of Fedora
I have a problem in my ubuntu 10.01 that it can't load a drive/volume in ubuntu. When I tried, it said: "Unable to mount location Error mounting: mount: /dev/sda1: can't read superblock". And when I boot my pc with 'Windows', it said : "UNMOUNTABLE_BOOT_VOLUME" under a blue screen. What can I do to solve this problem?
View 9 Replies View Related