I wish to gain access to a USB flash drive. It is old and I forget how small. Could somebody give me insight into a way to mount it if the security code isn't letting me access it via /dev/sdx?
Code:
Its annoying to unmount my flash drive twice.. its not a major problem actually but its kinda annoying , its whenever i plug-in my flash drive.. everything works well except when i need to un-mount it.. I usually unmount it twice using right-click of the mouse, then it mounts itself back, so i have to unmount it again.. Is there any way to control this? How do i setup the auto-mount option for USB flash drives?
View 1 Replies View RelatedHaving a problem mounting a flash drive on slackware 13.0
tried using command: mount /dev/sdb1 /mnt/hd
Geting an error special device does not exist. sda1 is my hdd, also tried sdc sdd
i bought i 32gb transcend flashdrive mainly to t0 another os.. but the problem is it doesnt mount in ubuntu 10.10 but is mounts in windows. when i type lsusb in my terminal after inserting ang again after removing it i see that there is one usb device which is shown when flash drive is inserted and dissapears when i remove my flash drive
View 9 Replies View RelatedMy Fedora does not auto detect a flash drive if I get to attach it with the OS already running. I still have to make a reboot and attached the drive right from the start in order for it to be detected/mounted.
Unlike In Mint 7, Ubuntu and XP, it automatically detects the flash drive as soon as it is attached.
make my Fedora detect the flash drive so that I would not have to reboot everytime I would use it.
FWIW here are some outputs:
Code: # /etc/fstab
# Created by anaconda on Thu Feb 4 06:06:47 2010
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
[code].....
I had to unmount a flash drive in GParted to format it, now I want to mount it again so I can use it, GParted does not get me a "mount" option and it does not automatically mount. How do I mount it so I can use it to make a Fedora Live USB? I am using Fedora 14 KDE BTW...
View 6 Replies View RelatedI have been using Linux for a while but I am more used to Debian based distributions. With distributions like Ubuntu, I have been able to get my flash drives to work instantly. However, I have no idea how to mount one in OpenSuse. I do not have much experience in configuring stuff like this because distros usually do this for me.
View 1 Replies View RelatedI've found some older threads with the same problem and read a few bug reports also. Nobody has a solution that has worked for me.How can I get Ubuntu 10.10 to be able to use something as basic as a usb drive?
View 5 Replies View RelatedI have Mandriva 08 and I can't get a MP3 player or a Flash Drive to mount. If I manually mount the Flash drive the "Computer File" won't create a file so I can access it. I get no desktop icons and I have checked the box in "config-whatever", The Flash Drive will appear in HardDrake but the MP3 player will not. The MP3 player will appear in the "Computer File" but will not manually mount.
View 2 Replies View RelatedUsb flash drive mount point not found.
see screenshot.
I recently upgraded to Gnome 2.30 and now usb drives don't auto-mount and show-up in Nautilus as a device.
I can mount the drive manually, but it would be nice if this happened automatically when I plugged it in.
I'd like to make regular backups of my flash drives, but I don't plug them in regularly. Because of this, I can't just use a scheduled backup application to back them up. Does anyone know of an incremental backup application that will automatically run backups on media as soon as it's mounted?
View 1 Replies View RelatedI am trying to setup my ubuntu machine to automatically log some data I am trying to collect and write the data to a flash drive. I have everything setup so that when the machine boots up it starts that logging process. The problem I am having is that sometimes (not always) ubuntu creates a directory with the same path that I expect my flash drive to mount to i.e., /media/data/ then my flash drive instead mounts to /media/data_/. I need to know the path of the flash drive so I can store my data on it.
View 2 Replies View RelatedI'm a NOOB to CentOS and Linux in general. I've been trying to find a way to mount my USB flash drive (FAT32) so I can see my files. I've been told that I need to add a USB controller. My CentOS is running as a VMWARE guest in WS7 loaded on a Vista host. My physical hardware is a Toshiba Satellite notebook. I've been told I have to add a USB controller before I can mount. Can anybody give me some direction with this?
View 5 Replies View RelatedI have two questions regarding auto mount function of Truecrypt. First question:
I want to automatically mount my flash drive encrypted by Truecrypt using a keyfile whenever I plug the drive. How can I do this? I use Ubuntu 10.10.
Second question:
As I do not know the answer of my first question, I currently use following command in a startup script to mount my encrypted flash drive automatically at every system start-up.
Quote:
/usr/bin/truecrypt -k ~/keyfile --auto-mount=favorites
My problem with this method is, Truecrypt always search for the drive in the same path saved in favorite drives list, e.g. /dev/sdb1. However sometimes there are more than one flash drive plugged to my computer and my encrypted drive's path changes. In such cases Truecrypt cannot mount my encrypted drive because it cannot find the drive in its path.
As a workaround I tried "auto-mount=devices" parameter. It is slow because it checks every mounted drive, and some of them external hard disk big in size. Moreover it does not recognize any mount point parameter. I'd like to mount the drive to the same mount point every time.
Quote:
/usr/bin/truecrypt -t --auto-mount=devices -p "" -k ~/keyfile /media/MyMountPoint
The command above mounts the drive however it is slow and to the destination of "/media/treucrypt1".
Also I have all files it asks for installed including dostools..Btw I used usb creator, then went to gparted and did something. The system is fat 32 now but with same message, not including ext4 part. Just the mount point message, and something about dosftools and mtools, wihich also are installed.
View 4 Replies View RelatedI always have a problem in simple user mode when I insert a USB key. Can't mount, can't open with file manager. I'm obliged to open a simultaneous root session, to do what I want to manage the usb key.
In my user manager, I don't know wich group I have to add to this simple user (it's me) so I am allowed to manage the usb key.
Due to the lack of a CD burner (at least one that works properly) I've been trying to install Debian on my laptop from a USB drive. I extracted the ISO contents onto my drive, made an entry in GRUB (on the flash drive - I'm booting from it) and can successfully begin the installation, but when it tries to mount the CD-ROM, obviously it can't, as there isn't one. I tried mounting the flash drive partition with the ISO contents to /cdrom manually, but I don't seem to be able to do so. I either get "No such device" or "Invalid argument". I CAN, however, mount the FAT32 partition of that flash drive (which oddly enough I cannot mount in Windows - go figure). The partition I need to mount is ext2. All of the partitions show up in /dev as well as /proc/filesystems.
Also, I'm using the netinstall to save space on my flash drive. ( http://cdimage.debian.org/debian-cd/...86-netinst.iso )
Why can't I mount my ext2 partition?
I made a persistent install of Ubuntu on a flash drive. I made changes to that installation. The software (Unetboontin) sets this all up. I think it partitions it for you. How do I image that flash drive to another flash drive?
View 9 Replies View RelatedHow do I configure my Debian installation to mount external USB drives to mount points based on the volume names of the drives? For instance, if I have a thumb drive with the volume name of "SWORDFISH," how do I have Linux mount it at /media/SWORDFISH? I'm aware that this can be setup in FSTAB, but that requires that I know the UUID of the device beforehand and that I take the time to set each external device up in FSTAB first. That does nothing for me when I have a thumb drive that has never been plugged into my computer before.
This seems to be setup by default in Ubuntu/Kubuntu, but is not working for me with a fresh installation of Debian Squeeze and KDE4. I've spent the past 2 hours Googling for a solution and have turned up nothing. UPDATE: My results are inconsistent. Sometimes Debian mounts devices to mount points based on the volume names, and other times it gives them generic mount points (e.g. /media/usb1).
I run a headless Ubuntu 8.04 server, which acts as a web, email and file server. I am sticking with 8.04 as it is a LTS release and will upgrade to the next LTS when it is released.
I have two external USB drives, that I need to mount at boot. I have been using /etc/fstab up until now, with the following entries:
Code:
However, as I gather from doing searches is quite common, occasionally I get an error during boot (causing the system to drop to a recovery shell) because the USB drives take time to wake up and the system hasn't found them by the time it reads /etc/fstab.
From doing searches, it seems there is nothing you can do to fstab to fix this, so you need to mount them using an rc.local script instead, using:
Code:
The problem is, as I have two USB drives, their /dev/sdxx location changes between boots. I thus want to use UUID codes as I do in fstab, however I haven't found anything about this.
Does anyone know how I can use the mount command and UUID to mount a drive in rc.local and what options I have to use the mount the drive with the same options that I am using in my fstab entry? Obvisouly, I can't refer back to fstab using the mount command, because then I will still get the boot error issue if they are listed in fstab. And there is no space internally for the USB drives as there is already two internal drives.
Not able to mount windows drive & foder, in linux. i have got following error.
mount error 92 = Protocol not available
I have servers installed with RHEL 4 2.6.9-89.0.9 ELsmp. I tried using uuid and label in /etc/fstab to automount usb drives to mountpoints that I specify after reboot. Unfortunately, it just does not work in all my RHEL4 servers. After every reboot, /etc/fstab will be automatically modified and all configurations related to my USB drives will be changed. Irregardless of whether i use UUID or LABEL in my /etc/fstab.However, it works on RHEL5. But, upgrading is not an option in my environment. I have been googling around looking for alternatives but everything seems to point back to using UUID or LABEL in /etc/fstab. Anyone has tried something that works? Please help me, thank you.
View 7 Replies View RelatedI have 2 internal drives. One is for the OS and one is for the Data. I tried to get the Data drive to mount automatically at login using some crap I found on a linux blog. Safe to say it didn't work and now I can't mount it with the OS on the OS Drive.
It mounts from a live CD and all the data is perfectly safe. When I try to mount the drive I get this error message: "Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/data" What have I done wrong and how can I make it mount again? Preferably this time at login.
I wanted to know if i can install 9.10 onto a usb flash drive--without using my computers hard drive at all when running ubuntu off the flash drive-
View 3 Replies View RelatedBack in Febuary, my wife bought a Toshiba Satilite from Wal-Mart and a few days ago the hard drive got toasted. So now I'm using an 8gig usb drive as the boot drive. I also have 2 other flash drives for downloads and such but overall I am very pleased.
I'm running 11.04 32 bit and was wandering if 64 bit made a difference. I've got 4 gigs of ddr3. It's slow to boot, but once it's running, it's faster then Windows 7. Very nice.
Is there anything I should chage, use, since I'm running it off a flash drive??
I have 3 seperat drives, 2 x 16 gigs and an 8 gig, and was wandering which one would be best for booting off of? What do I look for??
Here's what I got:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge
00:01.0 PCI bridge: Toshiba America Info Systems Device 9602
00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
[Code]....
I bought an 8GB flash drive because my D drive doesn't read DVDs. Anyway, my goal is to install Linux ubuntu and have it be my OS (replacing Windows XP). Last night I went to the Ubuntu homepage and downloaded the Ubuntu desktop edition 32-bit and put it on my flash drive. I followed the instructions on how to open and run it, but I was never asked about whether I want Linux to run side by side with Windows or if I want it to replace Windows. It downloaded the whole program, my computer restarted and then (on a black screen) it asked if I wanted to use Windows XP Home Edition or Linux Ubuntu. It's really frustrating because it took a while to download and install it in the first place AND to top that off, when I tried to use Ubuntu it went to a black screen and at the top said that there was an error. So I uninstalled all the ubuntu program and software and now I have a clean slate and want to try this again. I am a complete n00b. Could someone please walk me through how I can go about downloading (w/ links plz), installing and making ubuntu my ONLY OS on my computer via a flash drive? I'm desperate and I don't want to go through all of that and make the same mistake again!
View 9 Replies View RelatedI have a Transcend 4GB USB flash drive that suddenly stopped working. However, when I insert it into the USB slot, the light on the drive glows, but I'm unable to mount the drive, neither does ubuntu detect it.I disconnected the flash drive, and then run `dmesg | tail`. The result was this :
[ 623.940610] scsi7 : SCSI emulation for USB Mass Storage devices
[ 623.940928] usb-storage: device found at 6
[ 623.940931] usb-storage: waiting for device to settle before scanning
[code]...
I have been trying to share folders from my main PC which is running Ubuntu 10.04. I have been able to figure out Samba enough to get my a couple of folders shared, but I have been unable to share any folders which are on my external harddrive. After entering the path in my smb.conf file they appear on the network but I am unable to navigate to them. When trying to navigate to them through the network folder on the pc they are actually connected to I get an "Unable to mount location: Failed to mount windows share" dialog box. On the windows pc I am trying to share with I get, "Windows cannot acces \Josh-Desktop
ame of folder"
My smb.conf file looks like this:
That folders I cannot access are Music and Videos.
I was trying to figure out how to get my network drive to mount as a local drive on my computer. This was back on 9.10. Since I've upgraded to 10.04, my boot process halts and tells me (paraphrasing) /shared is not ready to mount. To continue, pres S to skip or M to manually mount the drive.
Well, I have it mounting now through GVFS and I don't need this in my startup anymore. Frankly, it's just annoying that it won't boot into Ubuntu right away. So, what's the startup file I need to edit to remove the attempt to mount the network drive?