OpenSUSE Install :: Cannot Mount CD Floppy Or USB Flash Disk
Jul 22, 2010
The system is 11.1 32 bit and used to work ok
All the drives function and mount normally under Parted Magic.
Sometimes a cd will mount after 15 mins or so but if it is ejected it will not remount. after that event the dmesg output is 3 times as long. As it is 35K chrs long it is too long to post!
I have changed hardware and cables with no effect.
I have run the repair option on the install disk. I get a cannot find floppy error
It also reports cups, hal, ntp & postfix as errors but if I select repair it still returns the same next time I run the repair routine.
It also says the bootloader is faulty if I select repair I go into an infinite loop so I exit with skip. Anyway the system boots ok and runs just fine apart from the cd/fdd/usb problem
View 3 Replies
ADVERTISEMENT
Jul 29, 2011
After installing 11.4 my fstab entries for CD and DVD drives as well as floppy generate errors when I try to mount them automatically or via Nautilus when inserting CD or DVD. The icons and CD/DVD name show up ok but will not mount. Manually mounting via terminal command works. Here are the relevant lines from fstab
[Code]...
In /dev scd0 and scd1 are symlinks pointing to sr0 and sr1 respectively. The above error message was generated after attempting to load a CD in scd0 i.e. my laptop internal CD/DVD drive. Lines 10,11 and 12 are the fstab lines quoted above.
View 6 Replies
View Related
Jan 17, 2011
This probably is something simple, and may have already been addressed on here.I have a 1.4MB floppy disk image file that I would like to mount as a drive.
View 5 Replies
View Related
Sep 11, 2011
I am trying to configure my test Squeze install on an older PC with LXDE desktop, and I can't seem to find anything which would enable me to mount a floppy.Then I tried to use the konsole as root mount -w /dev/fd0 /media/floppy0
But although this device and this mount point exist, nothing is mounted. I double checked with various floppies which I know have data on them and none of them are being mounted. The umount command would I expect be umount /media/floppy0 /dev/fd0...I tried searching the web and this forum and didn't find anything helpful. Can anyone help?
View 2 Replies
View Related
Jan 4, 2011
I have recently installed Xbuntu on my old laptop (An IBM iSeries 2621) - yes its an old piece of kit with a USB 1.0 port, a cd-drive and an internal floppy.My problem is that even though removable media are set to auto-mount in the settings; when I put a floppy disk in, or a CD-ROM, they do not auto-mount so I cant access the disks (the laptop does not have wireless (or even an rj45 port!! - it only has an internal 56k modem) - hence why I REALLY need to get the CD-ROM working and recognised by Xbuntu as I have burned some packages that id like to install to CD-ROM. (a working floppy would definately be a bonus as id like to save my documents there)
View 4 Replies
View Related
Sep 23, 2009
I am having a Promise TX4650 RAID controller & trying to create a driver floppy for installing the drivers. Also am using RHEL 5, I can create the driver floppy, but when I type "mount /dev/fd0 /media/floppy" I get error: "mount: mount point /media/floppy does not exist".Can I get the files in a format other than the ext2 floppy image, so that we do not need to use a floppy drive?There is a readme file inside the driver archive & you can use that as a reference.
View 2 Replies
View Related
Jul 7, 2011
I have just tried to mount my floppy with: mount -t auto -o uid=1000,gid=100 /dev/fd0 /media/floppy and get for response : cannot execute command '' mount -t auto -o uid=1000,gid=100 /dev/fd0 /media/floppy error 127
What is supposed to be done to get my floppy mounted?
View 9 Replies
View Related
Jun 7, 2009
error message:Unable to scan Floppy Drive for media changes Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
View 1 Replies
View Related
Apr 26, 2010
I cannot copy files to a floppy disk because access denied.
View 9 Replies
View Related
Feb 2, 2011
I have a DELL D420 without optical drive and i want to install opensuse 11.3 on it, also i don't have an external Optical drive. I want to know if it's possible to install OpenSuse 11.3 from a Flash drive or Amovible disk, and how to proceed to do that.
PS: is it a good idea to install Opensuse on dell d420: C2D ulv 1.2, 1gb ram, 60 HD ? it it'll work well.
View 3 Replies
View Related
May 4, 2010
I scored a Dell poweredge 6300 from a local pawn shop. It has the capability to boot from cd-rom, but apparently not with isolinux, which is what the debian installer cd uses. I was able to boot to UBCD411 (Ultimate Boot CD, which uses syslinux), but didn't see any option to boot to a CD (maybe I'm missing something here?). I tried using the boot floppy from this site. I didn't expect it to work (it's from the Woody era), and it did not. I got a message that says SYSLINUX ver.XXXX CBIOS boot failed. I went to [URL].. and looked for a boot floppy image for Lenny, but apparently it doesn't exist. I did however find the boot floppy image for Etch.
To be honest, even if I did find the Lenny floppy boot image, I'm not sure how to use it to point the system to the installer CD. So, I have two questions:
1) Does anyone know of a boot floppy image for Lenny, or if I could use the Etch boot floppy image?
2) How would one boot from floppy, then point the system to the installer CD?
System info:
(4) Xeon Pentium 2 processors 500 Mhz
(6) UltraSCSI hard drives
(1) SCSI cd-rom drive
(1) SCSI dvd-rom drive
(1) Floppy drive
(1) 10/100 NIC
I'm open to any other suggestions as to how I could install Debian Lenny on this machine.
View 5 Replies
View Related
Jul 5, 2011
I've used YAST to include a USB hard disk in the export list and mount it to remote machine with NFS. That worked first time the disk was mounted. On the next reboot I saw that the USB disk was mounted again in "/media" but in new folder and its previous folder existed but empty and was mounted with nfs. It seems that first nfs comes mounted in booting time and then USB gets mounted after logging as a user. USB hard disk finds its folder occupied and automatically creates new folder in "/media". What should be done in order to USB hard disk and nfs to be mounted in the same point automatically on the boot ? The second question : When I mount an external disk to be accessible remotely with nfs I get refused to unmount the disk as a USB device. Is it possible to be unmounted as a USB disk done without unmounting it as a nfs as well?
View 5 Replies
View Related
May 22, 2010
I need a small distro... that i can fit into a 1.44 Mb floppy disk... so i can install latest lilo.
View 6 Replies
View Related
Aug 6, 2010
I need to read/write to my flash disk which uses NTFs as it file system type.I read the tutorial at tips and tricks/NTFS
View 16 Replies
View Related
Jun 10, 2011
I wanted to avoid having to use my CDs, DVDs weren't an option, and I didn't have very large usb sticks. It seemed my only option for installing openSUSE onto my laptop was with some sort of network install/boot.
I ended up finding this really cool service, netboot.me. What you can do is download a very small image (<1MB) for a floppy, USB stick, or CD, and then boot off of it. Then you can either install pre-defined distros over the network (straight from the distro's servers), or you can make an account (by connecting your google account), and then make your own configuration. I managed to make a configuration for openSUSE 11.4, and I was able to completely install it, via only using one floppy disk and the internet!
My first step in the process was to download the floppy image. Since I was on a windows computer, I then downloaded rawwrite for windows, and I wrote the image straight to the floppy. After that, I restarted the computer and booted from the floppy. It loaded the image, then asked me to press a key or wait for 3 seconds. In order to boot from my configuration, this was the point where I had to press a key, and then choose the option of loading the custom configuration. The configuration I made has an ID of 434001 (which anyone is free to use). Unfortunately, according to their community, the gPXE "network stack" isn't very optimizied, so the initial two downloads took awhile (my speed was locked at 65 kB/s.)
It then began booting in the installation environment, which took about 15 minutes, although download speeds were now back at normal, faster speeds. I configured my installation, and let the package downloading begin!
View 9 Replies
View Related
Nov 28, 2009
I want to move to this system after bad experiences with windows. I have also a particular problem. An old laptop is probably able to handle just linux at this point of its life.
The cdrom is gone, the bios doesn't have usb boot support, there is no floppy or pxe network boot ability, so I was wondering what other way I can have to install linux on a barebone hd (nothing on it).
The only Idea I had was to copy some files on the hd via a ide cable adapter, connecting the laptop hd to the mobo of a desktop. I did the same in the past to install xp: I used msdos 7 to boot the machine and then launch the xp setup from withing the hd (copied before the installation files).
So my question is, can I do the same with linux? in such case, of course I will have a hd formatted with fat32 to boot in msdos, and what files should I copy on this partition to launch the installation?
View 9 Replies
View Related
Apr 4, 2011
I am trying to flash my bios but they only supply an exe or a floppy image. obviosly I am not running windows to run the exe and I dont have a floppy drive. So I have been trying to copy the floppy image to a cd with little success.Size of boot image is 2884 sectors -> genisoimage: Error - boot image 'F1B.IMG' has not an allowable size.The way I understand it thats 4 sectors over the 1.44Mb floppy size? Is there a way I continue anyway? Seeing that I will be putting it on a cd I cant see that the size is going to matter
View 14 Replies
View Related
Apr 25, 2010
I have problem with my laptop Samsung VM7000. The BIOS has a password on which I don't know. It has no HDD and the CD-ROM is damaged. I have a FDD floppy drive and two USB slots, they work (tested). To remove password I tried this http://dogber1.blogspot.com/2009/05/...ered-bios.html but it didn't work.Then I've found a Linux based password cracker http://www.pccmos.com/ but, since my cd drive is dead, I can't launch it. I can write it on a flashdrive, but my laptop is not booting from flash, so I have to make a floppy-boot-disc to boot flash via floppy, but how?
View 2 Replies
View Related
Mar 27, 2010
I've looked at a couple of threads on this subject but can't cure my Pb. I have a floppy drive that I rarely use. Last time was on an earlier version of FC without problems.
View 8 Replies
View Related
Sep 8, 2011
I need to read and write to a 3.5 floppy diskette. My one computer has a floppy drive. I did a search on this question, but the material that came up was ancient. There is no /dev/fd0 anymore. How can I mount a floppy?On this computer with the floppy drive I'm running F12 and kernel 2.6.32.26-175.fc12.i686.PAE. My computer running F14 does not have a floppy drive.
View 3 Replies
View Related
May 23, 2011
I have been trying everything to install flash player on Ubuntu 11.04, I've done everything and it wont work. Tried Downloading it from adobe, that ..... redirects me to, tried the source in the software centre, tried installing it through the terminal.
It either won't add the source or asks me for my install disk, when that is in the drive it keeps asking like it isn't (but it is mounted ect)Any one know a terminal command or way to fix this.
View 6 Replies
View Related
Jan 8, 2011
I'm trying to read contents of a floppy disk, can't even find the disk, much less contents.
View 9 Replies
View Related
Feb 10, 2010
I have a box that can not boot from USB, yet it can boot from floppy - how can I save the bootloader on a floppy and make it boot from USB?
View 1 Replies
View Related
Apr 23, 2011
I want to mount a 'super floppy' which is listed in the disk utility as /dev/sdb.
I am unsure of the sequence here. Should I first mount: mount /mnt/floppy ...or something similar And next edit the /etc/fstab file....or is this step not necessary.
Finally, this is vfat formatted. Should I try to reformat it in ext or leave it as is?
View 1 Replies
View Related
Oct 25, 2010
I know this is the 21st century, but there are a couple of floppies I needed to access and Ubuntu 10.10 couldn't read 'em. The floppy mounted, but with a disk in the drive I get "Media not found"....well, they work OK on Windoze. I found the solution on another forum. The latest version of udisks doesn't read floppies, but an old version will. You can't downgrade udisks from Synaptic, but there's a guide to downgrade here:[URL]It worked great, even for a n00b like me
View 1 Replies
View Related
Aug 6, 2010
I have an external usb connected floppy drive that I cannot mount.#fdisk -1 does not show the drive, in my ignorance I thought that it being a usb it would be recognized the same as flash drives and my external usb ide hdd are recognized.The drive does work, I have tested it in windows computers.Does the floppy need special settings?This may be related or it may be another issue totally:The floppy is recognized in gparted although I cannot format the disc to fat16 or fat 32 as they are greyed out.
View 5 Replies
View Related
Sep 1, 2011
I am working on an old PC and I am trying to mount a floppy disk. The disk is formatted as Fat12 with Quote: mkdosfs -F 12 /dev/fd0 Weather it auto mounts or I mount it with sudo mount Quote: /dev/fd0 /media/floppy0
it says it works fine, but if I add files to it,remove the disk and put it in another machine nothing is on the disk. The files I add to the disk just get added to /media/floppy0 as a normal directory. If I try to umount /dev/fd0 it says the device is not mounted, even directly after I mount it.
View 8 Replies
View Related
Dec 17, 2010
every time i try to mount the floppy drive it tells me there is no media in the drive
View 14 Replies
View Related
Jan 30, 2011
I've a dvd of "backtrack 4 r2 nemesis" which I'm about to install into my flash disk, so that I can access my installed backtrack system from not only my computer, but also from another computer by using the flash disk. "I don't know how to install "backtrack 4 r2 nemesis" into my flash disk".
View 2 Replies
View Related
Nov 18, 2010
I'm an experienced Linux developer who has run into a little problem. I'm using a National Instruments 8170 chassis, among the normal ports, it has a FDD and USB port but this model does not allow booting from a USB CDROM ( I tried a BIOS update, that didn't help either ). I made this cool customized 550MB FC8 LiveCD wtih X, GCC, various apps, etc. and a kernel 2.6.30 & 2.6.18 boot floppy disk with all the needed drivers. The floppy boots to a shell with all the busybox utils, etc. and detects the USB CDROM media and all its files.
My Question is: How do I get the kernel and initrd on the Live CD to start or boot after booting from the Floppy disk ?, I mean, I want to load linux again but this time from the CD after booting linux from floppy, if that makes sense. I'm just using the floppy to boot and recognize the USB CDROM. This can be done with MSDOS and loadlin but loadlin has an issue(it hangs) with the newer kernels (2.6.18 and greater). I searched for the loadlin source code to port it to linux but was unable to find it on the net.
View 1 Replies
View Related
