Has any one got this to run on Fedora 14. I have it running just fine on Ubuntu 10.04 but it will not boot up under Fedora. It seems to install just fine.Best program I have found to make or edit epub files. Sigil
View 1 Replies
I haven't put this in the forums for any of the separate programs, because im having the same problem in all of them, im thinking maybe its a problem elsewhere?I recently got a Canon DSLR. It can save in Raw format, I use this function. Canons Raw format is "Whatever.CR2"F spot viewer and all editor programs see then and 'preview' them with no problem. The images appear to have no problem until you load them into GIMP (with UFRAW) UFRAW standalone, RAWStudio etc.
They load, but only as a small vertical rectangle. Often very purple in colour.I thought maybe it was something wrong with just the way it looked, so I just loaded one, went save as (a jpeg) and then loaded it up, it loaded as a small picture of the same purple-haze bar.Have I done something wrong? I googled it, downloaded UFRaw, even Ubuntu studio, same problem before and after studio installation. All these programs claim to read raw images.Just as an example, In RawStudio:I load up the folder of raw images. I can see all the images clearly with no problems in the preview slider up top. I can scroll through them and see them all no problem. When I click on one, it loads in the editing box as some weird bar (always vertical in orientation) often faintly resembling part of the photo but with seriously acid trip colours. Eg massive purple hazes, green everything etc.
I used dvgrab to pull the video off of my Cannon HV30 HDV camcorder. Now I have a bunch of 5 minute clips at about a gig each. I need to edit these together and use a better file type. What should I convert to, and what program should I use for encoding and editing?
View 1 Replies View Relatedi try do modify BASHRC and ENVIRONMENT files on directory ETCthen all the command don't work, such as:SUDO, GEDIT, NAUTILUS, NANO and some others!now i want to edit the 2 files and delete the insert lines
View 9 Replies View RelatedI was able to convert a Real Estate Firm from using Microsoft OSS to OpenSuse 11.2.The Real estate agents in the firm are pleased and some are not but it's the cost of doing business and saving money.I am at a cross road or should I say I have come to a bump in the road. Most of the agents create their flyers and signs in Microsoft Publisher, I tried Open Office 3.X and I'm unable to open or edit the files in question.Do have any suggestions or could you point me in the direction of a solid solution that will help me either convert the files or a program that can be used with-in OpenSuse 11.2 that can edit the files
View 9 Replies View RelatedI'm a web designer, and a key part of my job is to edit and make images and designs
On windows, I'm used to Fireworks, and illustrator.
Whats the equivalent in ubuntu?
Windows stinks, macs are overpriced, and linux rocks. taht's why im trying to design on linux :-
Also, do you think drawing pads will work on ubuntu?
I downloaded the Komodo Edit 5 program for wysiwyg web edits, unpacked the tar ball and installed. However, I cannot find it using the Menu Updating tool.
View 6 Replies View RelatedI recently installed openSuse and eclipse. im trying to build a simple c++ program. i installed gcc++. but when i build the program, im getting this error: Error: Program "make" is not found in PATH.
View 3 Replies View Relatedi installed conky but it never worked :S Im using ubuntu 9.10 , after i installed conky i typed sudo conky but it stucked at conky : single buffer frame , but there were program barely working on the background so i typed gedit ~/,conky and i tried to edit it after that now not even working on background ! and gives me that error : Code:
energy@energy-console:~$ conky
Conky: missing text block in configuration; exiting
***** Imlib2 Developer Warning ***** :
This program is calling the Imlib call:
imlib_context_free();
With the parameter:
context
being NULL. how can i fix or/and how can i uninstall that program with all files and try to download again?
I want to make a program that maintains a list of tags that can be attached to a set of files. Store the tags in the files. The main problem is that there is no way to get a list of all the tags without reading each and every file. And also what if you have an unused tag? Have a file that contains tag "keys" and file list "values". This seems like it would be fast and effective, but what if one of the files gets renamed?
View 12 Replies View RelatedI have successfully installed fedora 10 and have rpmfusion in my /home/ directory. i don't know how to edit yum.conf to make yum install from this local repo. i tried once. But when i tried to install vlc i got an error saying some lib****** files are missing and missing dependencies.
View 2 Replies View RelatedI downloaded the current version of Sigil 64bit from Google Code https://code.google.com/p/sigil/ and it is just not working. Whenever I try to launch it the screen appears for less than a second and then vanishes. Does anybody know how to fix this?
View 5 Replies View RelatedI just installed Fedora 11 and then followed the directions here to add the adobe repo. Also, added the rpm fusion repo. But, when I search for 'flash-plugin' i get a nothing found reply? Did I miss a step or do something out of order?
View 11 Replies View RelatedI installed apache, php in my fedora 14.
phpinfo() works fine. But the following file 'a.php':
PHP Code:
<?php
if ( !file_put_contents( '/var/www/html/a.txt', 'aaa' ) ) {
echo 'Failed!';
# phpinfo();
} else {
echo 'Succeeded.';
[Code]....
I recently upgraded from fc8. I am running two nvidia NVS 285 cards with four monitors and using nvidia driver 190.53-pkg1. I have one card up and running and can edit the config file and make to other two work I just can't get all four to work together.
View 3 Replies View RelatedI installed a program with Yast (Kmess), but when I try to run it, bash gives me back this message:
Code: kmess: command not found I checked into Yast and it seems to be installed correctly!
I need to change a game's screen resolution in a couple of .con files, but when I double click on them all I get is success in a little pop up window. Can I move them to my computer, edit them with a text editor, and reinsert them with read only privileges?
View 2 Replies View RelatedI have rented a remote dedicated fedora 7 system. The service provider provisioned the system and does not allow direct "root" access to the system.
I currently use putty to login into "user1", switch to "root" using su -, and then edit the file.
I would like to edit the "root" file directly from my home XP system which has a SFTP connection to the remote fedora 7 system (using Aptana RadRails).
I am not sure how to do that. I had 2 ideas but I am just guessing and afraid to proceed with so little knowledge.
I considered editing /etc/group and changing the line
from
root:x:0:root
to
[Code]...
So is there anything out there that will edit the HD 3gp files from my cell phone? Or the HD files from my Nikon camera?
View 5 Replies View RelatedIs there an aplication/software that I can use to edit the Microsoft publisher (.pub) format files on fedora14.
View 1 Replies View RelatedI'm trying to install kmplayer-0.10.0c and im using Fedora 9. when i tried to install the kmplayer-0.10.0c using the command ./configure i received this error msg "The important program kde-config was not found!. Please check whether you installed KDE correctly." Kindly help how to solve this error msg.
View 2 Replies View RelatedA question on the packages installed. Went to program add/remove and found many unusual languages supported. Will I have problems if I remove them?? Also is KDE any better than GNOME for the desktop. recommendation on a book covering Fedora that the inexperienced can understand.
View 2 Replies View Relatedfrom the commend line i went to compile the c program by giving the commend "gcc first.c -o first" but the commend line showing gcc is not found. iam using fedora 13 pls tell me what can i do to compile the program. the program i used to compile is below
#include<stdio.h>
main()
{
Always had this problem on F13... if I run kword from console as root I get.kwordkword(14580): Session bus not found
KCrash: Application 'kword' crashing...
sock_file=/root/.kde/socket-icebox/kdeinit4__0
Warning: connect() failed: : No such file or directory
[code]...
When I try and run gedit command through terminal to edit files it won't open them
Quote: (gedit:4113): EggSMClient-WARNING **: Failed to connect to the session manager: None of the authentication protocols specified are supported g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
why i m unable to edit the files under root directory of apache ?and how to fix that plz tell me ?
View 3 Replies View RelatedI am trying to install Fedora 10 on an old P3 Inspiron 5000. When I boot from the Live cd the screen is split into three sections and is hard to navigate. I am able to edit the /etc/X11/xorg.conf file and log out and log back in to proceed with the installation. The problem is when I finish the installation and reboot to the new OS it boots to the triple section mode again because my xorg.conf is not edited. To do any commands in Fedora I need to get through a brief user setup in which I cannot navigate through until I can see the screen better. Is there a way to boot to a graphical type safe mode so I can see the whole screen to finish the installation?
How can I access folders from the live cd to edit the installed files? This way I can edit the xorg.conf file before booting and all would be legible.
I decided to switch from Ubuntu to Fedora Core 10 KDEdual boot installation worked perfectly... all smooth!untill i got to installing things....i wanted to install ndiswrapper, so i manually downloaded it on my second pc and transferred it trought a USB stick to the Fedora PC. When reading the 'installation manual' it clearly uses the "make" command a lot...problem is; bash error: "bash: make: command not found"So i google this and i get some solutions, all involving online repositories...so basically... i need internet to get the MAKE rpm, and i need the MAKE rpm to get the internet working... :')I tried searching online repositories but i haven't got a clue about what i need to download from there (to get the make command, or the "Development Tools") and how to install it on my fedora pc....i need help :P It would be much appreciated if someone could explain me how i could get these important packages up and running on my system with manual downloading and installing.I haven't got a clue how to do this manually... I've been on it for hours allready and I'm getting a bit fed up with it I can't understand why such an important package isn't standard included in the installation.
View 14 Replies View RelatedThe whole code is written in C, C++, and Fortran. Is it possible to make it to use more than 4GB memory. Now it is always crashed when it reaches 3GB memory. If it is possible, how to set up the compiling options (or configure flags)? We can use gcc, g++, ...or intel compilers our OS: Fedora 12 x32
[code]....
I have installed Fedora 12 x86_64 and vsftpd. I would like to set up an user for FTP so that he/she could only view/edit files in one certain folder (the one that I set up). How would I go about doing that?
View 2 Replies View Related
