Networking :: Disable Dhclient From Running On Rhel Release 6?
May 26, 2011
i've configured the machine to use a static ip yet dhclient still runs and obtains an ip. what needs to be done to stop this? it has to be something i can put in a script since i have written a setup script to run on several machines. this setup script creates/modifies several files with a few key ones shown below:
/etc/sysconfig/network
Quote:
HOSTNAME=csec7154
NETWORKING=yes
NISDOMAIN=csma
NTPSERVERARGS=iburst
[code]....
and the files, hosts, resolv.conf, network and ifcfg-eth0 in the /etc/sysconfig/networking/profiles/default directory all link to their respective files as does /etc/sysconfig/networking/devices/ifcfg-eth0. thanx!
View 1 Replies
ADVERTISEMENT
Jan 18, 2010
I received an amber light warning "IB110 - SBE Log Disabled." I've learned from Red Hat documentation that this is "for information only". Where can I find a better explanation of this warning? Also, what is the SBE Log, how can I enable it, and where can I view it? It doesn't seem to be in /var
View 1 Replies
View Related
Nov 8, 2010
I have a simple server running Ubuntu Server. Usually the server connects to the network by Wifi, so there is usually no cable connected to the Ethernet port. I noticed that there is a dhclient3 running on eth0 anyway. It is causing undesirable disk activity. Obviously, it is never going to get a response as long as no cable is connected. I can kill the responsible process manually, but I wonder first what is starting the process and how I can prevent it from being started. If there is a way to get the server to boot without starting this process, I wonder whether this is the right solution. Connecting to the network by Ethernet is the failsafe when Wifi doesn't work. I guess what I would like to see would be a way for the server to detect when eth0 does not have a cable connected and not start dhclient in that case, but to activate dhclient when a cable is connected.
View 4 Replies
View Related
Mar 11, 2010
I have a dynamic Internet connection. My eth0 is configured to DHCP client. I need to rum one personalized command all time the dhclient renew the lease. I have a program that update the /etc/hosts with the new IP and I need to run this command when dhclient receive one lease update.
View 1 Replies
View Related
May 24, 2010
How to disable dhclient on redhat host.
I have set static IP to one of my redhat host but I don't know how it changes to some other IP after few hours.
Here is the output from ifcfg-eth0 and rc.local
Code:
View 4 Replies
View Related
Jan 5, 2010
I used ssh to log into my sever that I had and I from there I ran the command dhclient eth by mistake on the server but the serve had an static IP address. Unfortunately I can't ssh back into the server anymore! It replies back with No route not host. Now my questions are. First of all how do I change it back into the previous setting? Secondly, can I do this remotely since the server is in another place and I don't have access to it right now or do I have to go there and sit behind it and play around with it there?
View 4 Replies
View Related
Feb 1, 2011
Can someone give me the out of /etc/redhat-release for RHEL 4.7?
View 1 Replies
View Related
Oct 14, 2010
I have two HP Quard core high end server.
OS : Red Hat Enterprise Linux Server release 5.2 (Tikanga)
Kernel : kernel-2.6.18-92.el5
From last couple of days I found entry in dmesg:
Should require KERNEL upgradation.?
View 8 Replies
View Related
Jan 31, 2011
While i am configuring network setting on backtrack4. i was running my backtrack on vmware workstation and NAT is bridged to physical mem like it was said on the tutorial that watched. i typed ifconfig eth0 up, and hit enter, as well as dhclient eth0 up, but resulted in different output. it says "no such device" is written and i would like to configre this problem.
View 2 Replies
View Related
Jan 31, 2011
My company has an RHEL 5.0 server on which we have been instructed by outside auditors to disable or uninstall NIS. I'm not finding a method for doing so in my on-line searches.
View 2 Replies
View Related
Sep 29, 2010
I am running Fedora 13 and after my machine is booted my ethernet interface eth0 does not have an IP address. Running
Code:
At the terminal does not work, and I can see that in /var/log/messages I have the following error:
Code:
I assume that the same command was attempted during the boot process (please correct me if I am wrong) to use DHCP to get an address for eth0, but failed for the same reason it is failing after boot when I run it manually, whatever that reason may be.
I noted, however, that eth0 IS in broadcast mode:
Code:
I also noted that running
Code:
Does in fact work and will run DHCP and configure eth0 with an ip address.
It is quite mysterious to me why running 'dhclient eth0' will work, but manually running 'dhclient' does not.
View 5 Replies
View Related
Jan 21, 2010
Had a problem getting my internet connection working with Ubuntu, but I resolved that issue. Problem is I still have to manually run dhclient every time Ubuntu boots, because I have no network unless I do. Is there a script or something that can do this automatically?
View 1 Replies
View Related
Jul 11, 2011
I am seeing the following error on a linux client..
daemon.info dhclient: No working leases in persistent database - sleeping
is this a problem within the client or related to interaction with DHCP server?
View 1 Replies
View Related
Mar 30, 2011
I'm working on a RHEL 6 base image for virtualization and I'm trying to pare down the things that we don't need. Considering none of the virtual servers will have wireless networking, I figured it'd be good to kill that wpa_supplicant process. even with the wpa_supplicant service off, NetworkManager seems to start it right back up. There isn't any wireless devices configured, so I don't know why it does this. I can't even kill the process, it starts back up immediately. Is there something in either the Network Manager or wpa_supplicant config files that would disable it permanently?
View 3 Replies
View Related
Mar 2, 2010
I have one RHEL server which is placed near a corner of the server room. Few people are using this server to watch movies and unwanted photos. I want to disable access to CD ROM. disabling the eject button of the drive wont work, as they used pin to force open the drive tray. Can I delete the cd rom drivers from the hard disk so that no CD will be detected ?
View 11 Replies
View Related
Jan 12, 2011
Anyway, according to the release notes, RHEL 6 has a PAE enabled kernel by default. Great... But that leaves me wondering why uname report SMP. Further, I'm provisioning some systems for QA use, and they're asking that PAE is disabled. My thinking is that since RHEL 6 requires PAE capability to install, there may be no way to disable it and the googling I've done seems to support this. tl;dr Why does a default kernel with PAE enabled report SMP on RHEL 6?
View 7 Replies
View Related
Apr 1, 2010
I got a full system crash each time I try to do anything with network. Been fighting with this problem for weeks now. What I did: -tried every driver for broadcom4312 and it turned out that it even crashes with cable net
-got rid of networkmanager
(
Mar 11 08:01:43 geburah NetworkManager: <info> Activation (eth1) successful, device activated.
Mar 11 08:01:43 geburah NetworkManager: <info> Activation (eth1) Stage 5 of 5 (IP Configure Commit) complete.
)
used:
ifconfig eth1 up
[Code]...
View 2 Replies
View Related
Apr 30, 2010
Code:
Commands as root works well when normal user is logged in and connected to net via KDE 4 network manager, but after logoff network is gone. And it is impossible to get it back because command mentioned above stops working!
View 4 Replies
View Related
Jul 7, 2011
I have just installled fedora, and I am puzzled by dhclient-script. Because it gives the router ip as nameserver 192.168.0.1. I have had other linux distro on same machine that resolves the correct nameserver without any configuring.
Does anyone know how to get your ISP:s nameservers instead in /etc/resolv.conf when running dhclient from CLI? I have thought about edit /sbin/dhclient-script. But if that is the case. Which option should I edit?
Quote:
My system
OS=Fedora 15
Kernel=Linux fedora_15 2.6.38.8-32.fc15.i686.PAE #1 SMP Mon Jun 13 19:55:27 UTC 2011 i686 i686 i386 GNU/Linux
Router =DLINK dir 100 (IP 192.168.0.1)
View 5 Replies
View Related
Nov 28, 2010
For test purposes I'm running Ubuntu 10.10 from a USB stick with a USB WLAN stick.The system finds the WLAN router and acquires an IP6 address, but no IP4 address.With "dhclient wlan0" though it does get an IP4 address and connects o.k.How do I setup the system so that this dhclient call is done by the system at startup (or whenever it is necessary)?
View 1 Replies
View Related
Jan 13, 2011
I have the following system
# cat /etc/redhat-release
CentOS release 5.5 (Final)
# uname -r
2.6.18-194.32.1.el5
View 1 Replies
View Related
Feb 24, 2011
I'm running Ubuntu 10.04.2 LTS and from time to time eth0 connection is lost.
Looking at syslog (below), if its a hardware (network card) problem or a software bug?
syslog file:
View 4 Replies
View Related
Jan 28, 2010
i want to disable all DHCP request, can i turn off the client that if a MAC address changes a dhcp request is not automatically made?reason for this: I have HP blade running with an Intel NC260M mezzanine card running with virtual connect. I have experienced problems with firmware levels with this card where the virtual connect mac address is ignored and the real MAC displayed. As we are using bonds on the servers and have 6 NICs installed we have to tie down the MAC address to a bond. A blade was replaced today without the firmware update and the real MAC appeared, a dhcp request was made and my-eth[2-3] and resolv.conf files were over-written by the dhcp supplied
View 3 Replies
View Related
Feb 22, 2010
how to disable boot,startup the clamav on rhel/centos.
View 1 Replies
View Related
Oct 5, 2010
Is VirtualBox on RHEL a good Idea? I am running rhel 5.5 on and amd 64 machine. The internet reviews rated VirtualBox pretty high. What is the real scoop?
View 2 Replies
View Related
Jan 5, 2010
i'm using RHEL 5.0 with ext2 or ext3 filesystem, now i wish to use ext4 without loose this Opreating System.... or without using another distro of linux...
View 1 Replies
View Related
Feb 1, 2010
how many terminals are running in background while rhel installation
View 3 Replies
View Related
Aug 26, 2010
I am trying to find the dyanmic heap size and stack size of a running process in rhel5.5 and rhel6.I read that the 23rd parameter in the file /proc/pid/stat gives the heap size.Can you elaborate more on this.Also is there any other way to do this?
View 5 Replies
View Related
Aug 13, 2010
Has anyone successfully kickstarted a rhel/fedora/centos over HTTPS ? In other words, is it possible to do the rhel/fedora/centos install from running apache with SSL enabled?
View 1 Replies
View Related
Jun 30, 2011
is it possible to disable screen dimming while VLC is running? Because it keeps dimming my screen after 10 minutes while I am watching a movie without moving a mouse..
View 1 Replies
View Related
