I am seeing the following error on a linux client..
daemon.info dhclient: No working leases in persistent database - sleeping
is this a problem within the client or related to interaction with DHCP server?
I'm using ubuntu 10.04 beta 1. when I try to update & upgrade I get the following error:
Code:
Setting up install-info (4.13a.dfsg.1-5ubuntu1) .../etc/environment: line 4: LC-ALL=en_US.UTF-8: command not found dpkg: error processing install-info (--configure): subprocess installed post-installation script returned error exit status 127 Errors were encountered while processing: install-info
While i am configuring network setting on backtrack4. i was running my backtrack on vmware workstation and NAT is bridged to physical mem like it was said on the tutorial that watched. i typed ifconfig eth0 up, and hit enter, as well as dhclient eth0 up, but resulted in different output. it says "no such device" is written and i would like to configre this problem.
View 2 Replies View RelatedI am running Fedora 13 and after my machine is booted my ethernet interface eth0 does not have an IP address. Running
Code:
At the terminal does not work, and I can see that in /var/log/messages I have the following error:
Code:
I assume that the same command was attempted during the boot process (please correct me if I am wrong) to use DHCP to get an address for eth0, but failed for the same reason it is failing after boot when I run it manually, whatever that reason may be.
I noted, however, that eth0 IS in broadcast mode:
Code:
I also noted that running
Code:
Does in fact work and will run DHCP and configure eth0 with an ip address.
It is quite mysterious to me why running 'dhclient eth0' will work, but manually running 'dhclient' does not.
Had a problem getting my internet connection working with Ubuntu, but I resolved that issue. Problem is I still have to manually run dhclient every time Ubuntu boots, because I have no network unless I do. Is there a script or something that can do this automatically?
View 1 Replies View RelatedI have installed kvpnc and loaded my profile using a .pcf file but seems not to be able to connect. the error I get is: error: The required daemon (vpnclient) is not available, connect will be disabled. I tried looking for vpnclient in the repo and over the internet but seems to be unavailable.
View 8 Replies View RelatedI got a full system crash each time I try to do anything with network. Been fighting with this problem for weeks now. What I did: -tried every driver for broadcom4312 and it turned out that it even crashes with cable net
-got rid of networkmanager
(
Mar 11 08:01:43 geburah NetworkManager: <info> Activation (eth1) successful, device activated.
Mar 11 08:01:43 geburah NetworkManager: <info> Activation (eth1) Stage 5 of 5 (IP Configure Commit) complete.
)
used:
ifconfig eth1 up
[Code]...
Code:
Commands as root works well when normal user is logged in and connected to net via KDE 4 network manager, but after logoff network is gone. And it is impossible to get it back because command mentioned above stops working!
I have just installled fedora, and I am puzzled by dhclient-script. Because it gives the router ip as nameserver 192.168.0.1. I have had other linux distro on same machine that resolves the correct nameserver without any configuring.
Does anyone know how to get your ISP:s nameservers instead in /etc/resolv.conf when running dhclient from CLI? I have thought about edit /sbin/dhclient-script. But if that is the case. Which option should I edit?
Quote:
My system
OS=Fedora 15
Kernel=Linux fedora_15 2.6.38.8-32.fc15.i686.PAE #1 SMP Mon Jun 13 19:55:27 UTC 2011 i686 i686 i386 GNU/Linux
Router =DLINK dir 100 (IP 192.168.0.1)
For test purposes I'm running Ubuntu 10.10 from a USB stick with a USB WLAN stick.The system finds the WLAN router and acquires an IP6 address, but no IP4 address.With "dhclient wlan0" though it does get an IP4 address and connects o.k.How do I setup the system so that this dhclient call is done by the system at startup (or whenever it is necessary)?
View 1 Replies View RelatedI have a simple server running Ubuntu Server. Usually the server connects to the network by Wifi, so there is usually no cable connected to the Ethernet port. I noticed that there is a dhclient3 running on eth0 anyway. It is causing undesirable disk activity. Obviously, it is never going to get a response as long as no cable is connected. I can kill the responsible process manually, but I wonder first what is starting the process and how I can prevent it from being started. If there is a way to get the server to boot without starting this process, I wonder whether this is the right solution. Connecting to the network by Ethernet is the failsafe when Wifi doesn't work. I guess what I would like to see would be a way for the server to detect when eth0 does not have a cable connected and not start dhclient in that case, but to activate dhclient when a cable is connected.
View 4 Replies View Relatedi've configured the machine to use a static ip yet dhclient still runs and obtains an ip. what needs to be done to stop this? it has to be something i can put in a script since i have written a setup script to run on several machines. this setup script creates/modifies several files with a few key ones shown below:
/etc/sysconfig/network
Quote:
HOSTNAME=csec7154
NETWORKING=yes
NISDOMAIN=csma
NTPSERVERARGS=iburst
[code]....
and the files, hosts, resolv.conf, network and ifcfg-eth0 in the /etc/sysconfig/networking/profiles/default directory all link to their respective files as does /etc/sysconfig/networking/devices/ifcfg-eth0. thanx!
I have the following system
# cat /etc/redhat-release
CentOS release 5.5 (Final)
# uname -r
2.6.18-194.32.1.el5
I'm trying to setup a OpenVpn on my Ubuntu 10.04 and after doing the configs from here: [URL] I get an error:
[Code]....
I'm running Ubuntu 10.04.2 LTS and from time to time eth0 connection is lost.
Looking at syslog (below), if its a hardware (network card) problem or a software bug?
syslog file:
I have a dynamic Internet connection. My eth0 is configured to DHCP client. I need to rum one personalized command all time the dhclient renew the lease. I have a program that update the /etc/hosts with the new IP and I need to run this command when dhclient receive one lease update.
View 1 Replies View Relatedgdevils pie daemon won't start. in lucid, i open from term and get the following errors
pyramid@Pyramid:~$ gdevilspie
** (gdevilspie:210: WARNING **: Trying to register gtype 'WnckWindowState' as enum when in fact it is of type 'GFlags'[code].....
gdevilspie opens fine, and I can select and save rules, but it won't start.
I have a problem with Transmission. After using it for over six months without a single problem, it suddenly stopped downloading. In the torrents that do no get downloaded, I get an error message Tracker responded: Unknown error (0) in the info window, tracker tab. But there are torrents with the same tracker that don'thave a problem and get downloaded fineThe logs don't give a clue about whats wrong either.I tried downloading those torrents with Vuze and I had the same problem. What could be wrong?
View 2 Replies View RelatedI've been trying to install the latest version of Emacs from source but I'm running into a trouble. The commands "./configure" and "make" work just fine. However, when I run "sudo checkinstall" I get a message saying that makeinfo is missing:
Code: makeinfo is missing - cannot build manuals make: *** [info] Error 1 **** Installation failed. Aborting package creation. Cleaning up...OK Bye. What is Error 1
so i cannot install anything because update-info-dir file is missing from /var/lib/dpkg/info/ .. I've searched for the last day and a half for a way to fix this, but nothing. can't even update dpkg because of this. so how do I bypass or fix this so I can install stuff (this is a fresh install of ubuntu 10.04 lts Lucid Lynx).
View 9 Replies View RelatedI have setup Nagios, Nagios Plugins, and nrpe. I have the nrpe running through xinetd.When I run /usr/local/nagios/libexec/check_nrpe -H <my_ipaddress> and I get the error
CHECK_NRPE: Error receiving data from daemon
I'm trying to read our companies mssql ordertracking db using php's mssql_connect. I was able to make this work when using WAMP, and I had done so by adding the same user on both machines and then applying that user name to the WAMP service. Because of viruses and poor performance... I moved the site over to ubuntu server and I have to say i am very pleased, other than I cannot make a connection to mssql now. I installed sybase5 and can see mssql is available via phpinfo. It's using freetds. I know all my connection info is correct. I can ping the machine that has mssql from the new webserver. When i try to view a test php connection page it returns nothing but a null response, and my error log just says ERROR with no specific info. I did however find out that /tmp/freetds.log returns a bunch of jibberish. ubuntu forum isn't letting me submit the whole log, so i put it on sendspace here [URL]...
I did jack around with odbc_connect but still couldn't get it to work... I feel like I am close with mssql_connect but there is some user authentication problem. why it won't return any info from the mssql db. Also I was wondering if something similar can be done with ubuntu where i applied a user to the WAMP service on my windows machine which then was able to connect to the mssql db.
I get the message when I try to deploy a virtual machine in the virt-mnager.
Unable to complete install: "Post operation failed: xend_post: error from xend daemon: (xend.err "Error creating domain: device model "usr/lib64/xen/bin/qemu-dm" not found")
Unable to complete install '<class 'libvirt.libvirtError'> POST operation failed: xend_post: error from xen daemon: (xend.err "Error creating domain: device model '/usr/lib64/xen/bin/qemu-dm' not found")
Traceback (most recent call last):
File "/usr/share/virt-manager/virtManager/create.py", line 1555, in do_install
dom = guest.start_install(False, meter = meter)
File "/usr/lib/pymodules/python2.6/virtinst/Guest.py", line 973, in start_install
return self._do_install(consolecb, meter, removeOld, wait)
File "/usr/lib/pymodules/python2.6/virtinst/Guest.py", line 1038, in _do_install "install")
File "/usr/lib/pymodules/python2.6/virtinst/Guest.py", line 1009, in _create_guest
dom = self.conn.createLinux(start_xml, 0)
File "/usr/lib/python2.6/dist-packages/libvirt.py", line 1277, in createLinux
if ret is None:raise libvirtError('virDomainCreateLinux() failed', conn=self)
libvirtError: POST operation failed: xend_post: error from xen daemon: (xend.err "Error creating domain: device model '/usr/lib64/xen/bin/qemu-dm' not found")
i think IM-settings is dead. i cannot get ibus or scim work.IM-Settings-Daemon[6769]: CRITICAL **: Giving up to bring the process up because Main Input Method process for ibus rapidly died many times. See .imsettings.log for more details.i have re-installed butProblem has been solved...re-install or update gtk2/glib2 and remove imsettings scim ibus im-chooser etc, everything.re-install imsettings ibus and im-chooser...thats it! i found sometimes the binary is not as good as source....
View 4 Replies View Relatedfor some reason, which I have exhausted all my thoughts upon..
I have mysql 5.0.77
I just made an amendment to the auto_increment_increment variable.. from 10 to 1
Gone to restart mysqld (im on redhat FYI) and get the error:
'Timeout error occurred trying to start MySQL Daemon.'
It fails to stop, and obviously fails to start.
I have included below my 'my.cnf' file but I cant see any issues with it, and can't for the life of me think why there is something wrong.
If I ever come across an issue, I don't tend to ask but instead try and figure it out (usually with success) but this time.. I just cannot get my head around it..
I have a daemon script which wakes up every 5 minutes and checks the health of started processes. It works fine during the day but throws a syntax error just after midnight.Here is the log:
(02/22-23:49) Check all started processes
(02/22-23:54) Check all started processes
(02/22-23:59) Check all started processes
[code]....
I have slackware 64 13.37 Kernel 2.6.37.6 I am trying to install notifcation daemon so I can use notify-send. I am trying to install the package notification-daemon, via sbopkg using the 13.37 repository. I have installed dependencies: ORBit2, GConf, libsexy.I hit this error during installation of notification-daemon.
/usr/lib/libdbus-glib-1.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
I did previously have gsb gnome 3 installed, but removed that and then lost notify-send.
I have Centos 5.1 and im a total newbie. I have managed to get it running with Apache and PHP but after I install mysql it fails to start with the above error. I have removed it as well using YUM and reinstalled it but it still will not start.
View 4 Replies View RelatedI have been comileing that kinect hack with the 3d video capture. i did everything, calibrated cameras and everything else but when i try to open the final program (KinectViewer) i get back this error: Caught exception Misc::File: Error opening file CameraCalibrationMatrices-B00363201643043B.dat in mode rb. From what ive gathered off the web it is not opening it because its in binaly mode or something to that affect. any tips to fix it? is there a way to change what mode im in?
View 2 Replies View RelatedOpenSuse 11.2 (64 bit)
GDB 6.8.91.20090930-2.4
I ran GDB on a program and am receiving following errors,
Code:
anisha@linux-uitj:~/junk> g++ -g jk.cpp
anisha@linux-uitj:~/junk> gdb a.out
GNU gdb (GDB) SUSE (6.8.91.20090930-2.4)
Copyright (C) 2009 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later [URL]
This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details.
This GDB was configured as "x86_64-suse-linux".
For bug reporting instructions, please see: [URL] ...
Reading symbols from /home/anisha/junk/a.out...done.
(gdb) b readline
Breakpoint 1 at 0x400b90: file jk.cpp, line 19.
(gdb) r
Starting program: /home/anisha/junk/a.out
Missing separate debuginfo for /lib64/ld-linux-x86-64.so.2
Try: zypper install -C "debuginfo(build-id)=591af1afa33f255704fb6a60859b93d00e205302"
Missing separate debuginfo for /usr/lib64/libstdc++.so.6
Try: zypper install -C "debuginfo(build-id)=62220ad5c8941afb5d332c0c47d32f8beec8ac50"
Missing separate debuginfo for /lib64/libm.so.6
Try: zypper install -C "debuginfo(build-id)=57fc1891d8d9f419fb8c7fc06a8285563b53a47e"
Missing separate debuginfo for /lib64/libgcc_s.so.1
Try: zypper install -C "debuginfo(build-id)=0206e11fa8ca0db0633073adcbf1349a7871e1dc"
Missing separate debuginfo for /lib64/libc.so.6
Try: zypper install -C "debuginfo(build-id)=c5a3dfd66bf61fcdec9bc22153b2fbd0d6697960"
can't open input file (null)
Program exited with code 01.
(gdb)