my eth0 connection is not automatically connected when fedora starts. I checked " activate device when windows starts" in network configuration. still it is not auto connecting and after connection the network icon is not changing to connected status although it is connected.
View 4 RepliesI can't start eth0 and have read thru many of the threads on this and can't figure it out. What does this message mean?
Code:
[jeff@chladni ~]$ ifup eth0
Active connection state: activating
Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/13
[Code]....
I just finished installing Fedora 12 on a rack mount server. I was modifying the /etc/sysconfig/network-scripts/ifcfg-eth0 file to use a static IP address, but now nothing works. The device does not boot on start up or anything.Currently, ifcfg-eth0 looks like:
Quote:
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=none[code].....
The eth0 device does not start on boot; the server does not get the IP address, is not reachable over the network, and will not connect to the internet....
I can't figure out why my ethernet isn't recognizing its connection. ifconfig returns the hardware address, route -n returns an empty table
View 9 Replies View Relatedso I now have 4 Ubuntu Lucid LTS installations - terrific - but the alternative Ubuntu boot on this particular PC (all made from the same Live CD) does not have any eth0 configured, so I cannot reach even my router. I can look at the eth0 properties with "Network tools" and it has no IP or MAC. I have the network notification gremlin installed but it does not appear on the top panel. {"eth0" hardware works under Win XP, hence this post}.
I'm a novice at Ubuntu, and I am at a loss. I realise that networking is supposed to be automatic, no 'tool' should be needed, but what can I do when it has not configured?
Upgraded To Ubuntu 10.04 The Other Day. And when I first installed it everything worked great except for my sound card which I fixed. But there was no problem with connecting to my Router via an Ethernet cable. Then I updated the video card drivers, restarted my PC and it wouldn't connect. It would try over around 1-2 mins then tell me its disconnected. No green light activity on the router / network card either.
I've reinstalled fresh copies of Ubuntu a couple of times now, Hoping to get the default settings back. But nothing has worked since.
I looked around the net and found quite a few people had this problem on previous versions of Ubuntu but it would seem most of there fixes were for there Version, so it hasn't helped me.
Heres some info:
ifconfig:
I've tried all the various things from dhclient to ifup/ifdown etc etc.
I'm using Easytether through my HTC Droid for interwebs running Ubuntu 10.04. However I also have a home network. However when I hardwire into the network via a D-Link router (Auto eth0) my internet no longer works. The same is true when I plug in my iPod. The Droid loses it's connection. What is the problem?
View 2 Replies View RelatedI am using BSNL broadband ISP and I am able to get network on windows os but not on my ubuntu.( I have a dual boot). I see Auto eth0 connected from the notification but when i am pinging [URL]... it says unknown host.
View 9 Replies View RelatedI'm running Kubuntu 10.4. My problem is that Network Manager keeps defaulting back to Auto eth0. I have created a new wired connection and set my manual addresses. I have ticked the 'connect automatically' button. Every time I reboot or wake up it reverts back to Auto eth0.I did have wicd installed but this was not reconnecting after wake up (said it was connected but I couldn't ping etc), this is a pain also.
View 9 Replies View RelatedI'm trying to setup my interfaces along side GNS3 for study purposes, and came across a ..... vid saying to try this (my current config)
[Code]....
I'm praying for some crappy syntax error, also in Network Connections... its now blank, the original auto eth0 setup is missing
I just installed TuxGuitar - very cool - and to get the sound to work I had to install Timidity++ as well. Before I start TuxGuitar I have to execute:timidity -iA -Osin a terminal window first, which is kind of a pain to do every time I run TuxGuitar.How do I get this line to execute on startup such that timidity is running when I start up? I tried adding that line to rc.local
View 13 Replies View RelatedWhen I shutdown computer and start it up, eth0 doesn't seem to show up (though lspci sees ethernet card and modules are loaded). When i reboot (which is exactly the same, in my opinion), it works good. I'm using Sabayon GNU/Linux, Gnome Network Manager applet.
>uname -srm
Linux 2.6.34-sabayon x86_64
>sudo lspci | grep Ethernet
00:19.0 Ethernet controller: Intel Corporation 82578DC Gigabit Network Connection (rev 05)
How does one get the wifi to auto connect upon start up, instead of having to manually select it every time i log on? I think the following script is what i need but im not sure where i would even need to install it.Automatic WLAN Picker Script
View 4 Replies View RelatedI've configured a pptp VPN using KNetworkManager. It works fine. Now I want to have it started automatically then my network interface is assigned a particular IP from my home DHCP server. I don't need it in other places. I guess there is no such built in functionality, but may be it can be scripted somehow?
View 1 Replies View RelatedOn my local network, I use my Linux machine running dhcpd and IP masquerade as a gateway to the internet. As it is, the setup works just fine, and I've enabled dhcpd in all runlevels in the services dialog, but for some reason, it still does not automatically start when I boot the machine. If I select it and click "Start", it operates normally, and if I run "services dhcpd start" from a command line, that works too. My only guess is that it's some problem with my config file... it's the same setup I used with previous versions of Fedora without issues, but maybe things have changed?
The contents of /etc/dhcp/dhcpd.conf:
Code:
ddns-update-style interim;
ignore client-updates;
subnet 192.168.1.0 netmask 255.255.255.0 {
option routers 192.168.1.8;
option subnet-mask 255.255.255.0;
option domain-name-servers 64.59.176.13, 64.59.176.15, 64.59.177.226;
option ip-forwarding off;
range dynamic-bootp 192.168.1.100 192.168.1.200;
default-lease-time 21600;
max-lease-time 43200; }
now my system does not connects automatically when fedora start's to eth0 i have to connect it manually by pull down menu in the beginning hostnname was dbe272b22.dslam-172-17-161-245-0532-474.dsl.cantv.net i do not remember if the last part ".cantv.net" was there.... i changed hostname "dbe272b22.dslam-172-17-161-245-0532-474.dsl" maybe ending with ".cantv.net" with system-config-network for hostname "edicta" i modified /etc/hosts by hand twice, now do not remember what i did exacly but here you can see /etc/hosts
[Code]....
I have USB Modem ZTE AC2726 . I am always Connect using Wvvdial or Network Manager , it Works Fine , But I want to do that when computer Booting it can auto start but i can�t do this . i have use many rules such as /etc/rc.local or udev rules to failure .I am using Fedora 14.
View 3 Replies View RelatedI want to set my desktop IP address to always be 192.168.1.2. The NetworkManager connects to the network automatically and the IP address is assigned randomly. I can set up another connection in NetworkManager and always change over. But is there any way to make the default eth0 interface to be permanently set to a certain address (using NetworkManager, not ifup)?
View 9 Replies View RelatedWhen I log onto my Ubuntu 9.04 boot I am disconnected from the internet, on my windows 7 boot It works just fine, I have attempted disabling networking, power cycling the modem and router, and re-enabling networking, no dice though. hovering over the connection icon tells me that there is no network connection.
Opening the edit connections window tells me that there a wired connection called Auto eth0 that is set to never, and that is all that I can find. I hunted for other forums on this and found a few but none with a successful resolution.
Problem I have is the Samba server, it does not seem to start up the shares at boot.When I boot the system, nothing is available on the network, I have to run the Samba Server Configuration Tool everytime I want to access a share, edit a share, save and quit, then my network shares become available.I see Starting SMB services during boot up, it says OK.It worked good on Fedora13.
View 2 Replies View Related5.10 Breezy configured as machine controller. Works great eth0 is a fixed IP to communicate with controller comms board. Not easy at all to alter - the comms board is hard coded to listen on eth0 for commands.
I can use eth1 as the default gateway and ping google.com, etc. But when I now attempt to communicate with the controller with netcat, e.g.
Code: echo !HH | nc 192.168.1.6 80
I obviously never get an answer since the request is passed via eth1. Using the -g option with netcat doesn't work either. I had a look at iptables but it doesn't seem to be able to do what I want. How I can still use eth0 as my communication port to the controller whilst eth1 is the default gateway?
I have two servers on a vlan at my datacentre/colocation and previously both servers had public IPs on their eth0 interfaces. The servers are HP ProLiant DL360s - one is a G4 and one is a G5 The newer G5 is now the LAMP server and the G4 has been retired and I want to repurpose it as an iSCSI target using openfiler freenas or similar.
My G5 has public/static IPs lashed to the eth0 physical interface and the eth1 is not configured to do anything yet. The G4 will have both interfaces available - perhaps one for ssh access from one of my static public IPs and the other to be a private IP on the local vlan. Here is what I am trying to get my head around...
The G5
eth0 - Public IP - full LAMP services on two or three virtual interfaces
eth1 - Private IP 192.168.0.1
The G4
eth0 - Public IP for ssh
eth1 - Private IP 192.168.0.2
Because my traffic between eth1 on these boxes is via private IPs on the local private vlan it doesn't add to my quota for bandwidth. How do I go about configuring the routing and gateways and other aspects of this so that I can run a private IP space network between the eth1s and still serve the outside world from the eth0s...
I am afraid that if I assign the private IPs to the eth1 interfaces the routing may either not work or interfere with the access to the production internet facing interfaces (eth0s).
I'm running a dual boot Ubuntu 10.04/Backtrack 4 (Ubuntu 8.10) system. I can get internet in the BT4 side but not in the Lucid side. In Lucid I can ping my router, and the network manager says I'm good to go, but I can't get to any web sites. It all started when I tried to put my laptop on another network by mimicking the settings of a computer I had just unplugged from the network. MAC address and all.
ifconfig eth0:
Code:
eth0 Link encap:Ethernet HWaddr 00:1f:16:ba:4c:8c
inet addr:10.136.9.147 Bcast:10.136.9.159 Mask:255.255.255.240
inet6 addr: fe80::21f:16ff:feba:4c8c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]....
If I made a distro from scratch it would have been Lubuntu, cept I'm sure my theming would have been horrible. Now Ive installed on a couple of my Laptops, and even had a few friends convert, and for the most part everything is hunkus doris, cept one small issue thats keeping me from slapping it on my trusty laptop. I'm lost as to what the problem could be. Ive tried just about all I can think of, but I use sprint mobile broadband to connect to the net and then use Network Manager to share this connection with the laptops and Palmtops around the house. I can get my sprint modem to connect thats not a big problem the problem is now I cannot get the Auto Eth0 to connect to send out as a share. It just refuses to connect. Now this is not a Lubuntu problem at all Im sure its somehow a Lxde problem, as Mint Lxde, PeppermintOS, and so on do the same thing, refusing to connect Auto Eth0 while Sprint is connected. Any Gnome based distro this works flawless, as does Xfce distros, so Im sure this is somehow something within Lxde. Im sure its down to just "missing" a file or some stupid overlooked thing.
View 3 Replies View Relatedim trying to setup eth0 with subdevice eth0.0 and eth0.99 to come up at boot
eth0 is dhcp clint
eth0:0 is static ip
eth0.99 is 802.1q vlan interface
/etc/network/interfaces
Code:
auto lo
[Code]....
I downloaded Fedora 10 32bit and put it on a Dell Dimension 8200 to save it from the recycle bin. Everything seems to work except I cannot get an IP addr. Roadrunner is my ISP using a cable modem and a Linksys Instant Broadband Series Etherfast Cable/DSL router model BEFSR41. In system-config-network, the nic shows inactive. If I activate it a window opens saying "determining IP information for eth0". After a short time the message adds the word "failed". Using a Windows PC on the same network, I can look at the DHCP connections on the Linksys and I see the MAC addr for the PC running Fedora.
From the OS installation, /etc/sysconfig/networking/devices/ifcfg-eth0 has following:
DEVICE=eth0
HWADDR=00:80:ad:d1:88:c9
ONBOOT=yes
[Code]....
I'm guessing this is a r8169 problem. This worked for a while after upgrading to fc13 (from fc12)
I'm not able to get off the local network with eth0. I can though with eth1. Both interfaces are connected to the same switch and have the same network, gateway, and dns server addresses.
The odd part is I am able to ping eth0 from off the LAN and get a reply.
Wireshark capture is attached.
i install kernel rpm after i boot that kernel network not working kernel name : kernel-rt-trace-2.6.24.7-132.el5.centos.i686 [URL] error "Bringing up interface eth0: Device eth0 has different MAC address than expected, ignoring."
View 1 Replies View RelatedI just installed Fedora 10. I entered my static network info in Network Configuration. When rebooting, the eth0 says Inactive. I've read many articles about this problem on earlier versions and tried many of the suggestion, but have not found a definite way of solving this. Is there a better way or a workaround to get this machine on the network?
View 6 Replies View RelatedI'm using Fedora 12 on a box with 2 separate NICs in different subnets. The problem is that after a reboot, both NICs always show up as eth0 when you left click on the networking icon on the top right. I have to manually change one of them to eth1 & then things start working.
DEVICE=eth0
HWADDR=(mac address)
BOOTPROTO=none
TYPE=Ethernet
ONBOOT=yes
[Code]....