Fedora Networking :: The Eth0 Device Does Not Start On Boot?
Mar 29, 2010
I just finished installing Fedora 12 on a rack mount server. I was modifying the /etc/sysconfig/network-scripts/ifcfg-eth0 file to use a static IP address, but now nothing works. The device does not boot on start up or anything.Currently, ifcfg-eth0 looks like:
Quote:
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=none[code].....
The eth0 device does not start on boot; the server does not get the IP address, is not reachable over the network, and will not connect to the internet....
View 2 Replies
ADVERTISEMENT
Jul 9, 2010
I can't start eth0 and have read thru many of the threads on this and can't figure it out. What does this message mean?
Code:
[jeff@chladni ~]$ ifup eth0
Active connection state: activating
Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/13
[Code]....
View 1 Replies
View Related
Aug 10, 2010
Yesterday I did an upgrade and today my box is unable to connect to the internet.
I have tried another cable, it didn't help.
Basically NetworkManager does not connect eth0 to the network, if I try to run ifup from the command line I get:
Code:
I can see in network configuration settings, that the device has been correctly detected and eth0 interface is correctly activated, yet when I try to uncheck the box manage by NetworkManager and start it manually, it tells me that the cable is disconnected... I've tried two different cables, different ports on my router - no help.
View 3 Replies
View Related
Jan 6, 2011
my eth0 connection is not automatically connected when fedora starts. I checked " activate device when windows starts" in network configuration. still it is not auto connecting and after connection the network icon is not changing to connected status although it is connected.
View 4 Replies
View Related
Dec 26, 2010
i install kernel rpm after i boot that kernel network not working kernel name : kernel-rt-trace-2.6.24.7-132.el5.centos.i686 [URL] error "Bringing up interface eth0: Device eth0 has different MAC address than expected, ignoring."
View 1 Replies
View Related
Apr 5, 2010
i have 5.4 installed on a super-micro server motherboard (has two gigabit ether ports). when i boot while its initializing everything it gets to the "starting eth0" and just stays there?
right before it boots up and says press any key for options i press a key and choose "centos (2.6.18-164.el5)" and it boots up fine but when i choose "centos (2,6,18-164.el5xen)" the problem occurs. and that is the default boot option.
View 3 Replies
View Related
Feb 4, 2010
I'm using Fedora 12 on a box with 2 separate NICs in different subnets. The problem is that after a reboot, both NICs always show up as eth0 when you left click on the networking icon on the top right. I have to manually change one of them to eth1 & then things start working.
DEVICE=eth0
HWADDR=(mac address)
BOOTPROTO=none
TYPE=Ethernet
ONBOOT=yes
[Code]....
View 1 Replies
View Related
Nov 3, 2010
I use my T61 both wireless and in the dock, where I switch to the wired connection. After the latest round of updates, I seem to have lost the ability to switch to the wired network. When I turn the laptop on, I see it connect to the wireless network, but when I left click on the tray icon under Wired Network is says Device not managed. I have not made any changes to anything in the last couple weeks, besides some updates. How do I go about getting the wired network back in there?I tried to add eth0 back into System - Preferences - Network Connections, but whenever I try and add eth0, but it still says Device not managed.
View 2 Replies
View Related
Jul 16, 2011
I am trying to sort out some issues following an upgrade from F12.
I have eth0 as the connection I want to use. Prior to the upgrade, this connection was enabled and active at boot.
Now, for some reason after the upgrade it has to be manually enabled at every boot - even though when I go the Network tool, Ethernet Device > General tab - "Activate device when computer starts" is checked.
At every boot time it is inactive.
In all the ifcft-eth0 files, the ONBOOT parameter is set to "yes".
View 12 Replies
View Related
Nov 18, 2010
I've looked today on my logs /var/log/message and I find device eth0 entered promiscuous mode I don't remember putting eth0 in promiscuous mode I'm connected to the net thru a router how do i turn that off ?
View 1 Replies
View Related
Dec 14, 2010
I have to do a project on network security.For that i have to capture the packets from the device. I installed libpcap tool in ubuntu. If I give ifconfig -a it lists out eth0, wlan0, lo. I am able to connect to the internet via eth0. But when I give
#include <stdio.h>
#include <pcap.h>
int main()
{
char *dev, errbuf[PCAP_ERRBUF_SIZE];
[Code]...
It says device is null. I'm not able to run sniffex.c program also. All I want to do is to capture the live network level packets and analyse them.
View 2 Replies
View Related
Jan 31, 2011
While i am configuring network setting on backtrack4. i was running my backtrack on vmware workstation and NAT is bridged to physical mem like it was said on the tutorial that watched. i typed ifconfig eth0 up, and hit enter, as well as dhclient eth0 up, but resulted in different output. it says "no such device" is written and i would like to configre this problem.
View 2 Replies
View Related
Jun 22, 2010
My eth0 is not up everytime at boot up. I will need to <service network restart> to get it up.
I have used yast's /etc/sysconfig editor to set /etc/sysconfig/network/config -> MANDATORY_DEVICES to eth0
And I have also added <alias eth0 e1000e> to /etc/modprobe.conf.local
And also set eth0 device to activate device at boot time using Network Card Setup.
But eth0 is still not starting up at boot time. What should I do to get it up at boot time?
I'm using openSUSE 10.3. And no, I'm am unable to move to 11.2
View 1 Replies
View Related
May 5, 2010
My network name is eth2 it was changed by some reason and now i got these errors... i installed, reinstalled, re re installed, tried to run the asistant but no luck :/
Code:
* Stopping the Firestarter firewall...
eth0: error fetching interface information: Device not found
eth0: error fetching interface information: Device not found
eth0: error fetching interface information: Device not found
[code]....
View 1 Replies
View Related
Dec 21, 2010
Installed Centos 5 on IBM T60P laptop. Intel 82573L Gigabit ethernet controller. Keep getting this erro message, "e1000 device eth0 does not seem to be present, delaying initialization."
View 3 Replies
View Related
Apr 22, 2011
im trying to setup eth0 with subdevice eth0.0 and eth0.99 to come up at boot
eth0 is dhcp clint
eth0:0 is static ip
eth0.99 is 802.1q vlan interface
/etc/network/interfaces
Code:
auto lo
[Code]....
View 1 Replies
View Related
Jun 17, 2009
I have swapped out four known working, different bran network cards. Each one I get the same error as in the subject. If I boot to a Live CD such as CentOs 5.3 LiveCD both Nics are given an IP. This seems to only be happening with my CentOs 5.3 server install.I noticed the CentOS Live CD the Nics were reversed from eth0 to eth1 and eth1 to eth0.
At the moment as of the output of the commands, I am running two identical Nics, since the first one has always worked. I have previously used an rtl8139, 3com c3905-TX, onboard Rhine III based (now disabled) Here are steps I have done to try and figure this out:
Quote:
[root@centos ~]# lspci | grep -i eth
00:0a.0 Ethernet controller: VIA Technologies, Inc. VT6105/VT6106S [Rhine-III] (rev 86)
00:0e.0 Ethernet controller: VIA Technologies, Inc. VT6105/VT6106S [Rhine-III] (rev 86)
Quote:
[root@centos ~]# cat /var/log/dmesg | grep -i eth
eth0: VIA Rhine III at 0xee800000, 00:1b:11:bb:17:7d, IRQ 177.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[code]....
I went through the system-config-network-tui. I copied /etc/sysconfig/network-scripts/ifcfg-eth1 to the ifcfg-eth0 and edited for sanity. and as stated earlier, have swapped out four different nics for eth0, and booted to two different LiveCD's. Both LiveCD's work fine.
View 3 Replies
View Related
Apr 30, 2011
I am running a CentOS 5.6 as a Virtual Machine on my Laptop. And, to connect to internet I am using a datacard (usb modem) device (Tata Photon +).
Now, internet is working well on my VM through interface ppp0
The problem is that when I start my interface eth0, internet (running through ppp0) stops.
Quote:
[root@kick ~]# ip route show
172.29.242.9 dev ppp0 proto kernel scope link src 14.99.211.189
default dev ppp0 scope link
[root@kick ~]# ip addr sh
1: lo: <LOOPBACK> mtu 16436 qdisc noop
[Code]....
View 4 Replies
View Related
Jan 14, 2011
when I first installed it on my IBM thinkpad, the eth0 was working correctly. I had someone try to install the network card for me, and something was changed to where now the wired connection is displaying "device not managed".
View 2 Replies
View Related
Apr 29, 2010
When i wan to activate device in network configuration, it pop out with "CANNOT ACTIVATE NETWORK DEVICE ETH0". There is a sentence after this also : "rlt8129 device eth0 does not seem to be present, delaying initialization."
View 14 Replies
View Related
Sep 13, 2010
When I shutdown computer and start it up, eth0 doesn't seem to show up (though lspci sees ethernet card and modules are loaded). When i reboot (which is exactly the same, in my opinion), it works good. I'm using Sabayon GNU/Linux, Gnome Network Manager applet.
>uname -srm
Linux 2.6.34-sabayon x86_64
>sudo lspci | grep Ethernet
00:19.0 Ethernet controller: Intel Corporation 82578DC Gigabit Network Connection (rev 05)
View 2 Replies
View Related
Mar 26, 2009
now my system does not connects automatically when fedora start's to eth0 i have to connect it manually by pull down menu in the beginning hostnname was dbe272b22.dslam-172-17-161-245-0532-474.dsl.cantv.net i do not remember if the last part ".cantv.net" was there.... i changed hostname "dbe272b22.dslam-172-17-161-245-0532-474.dsl" maybe ending with ".cantv.net" with system-config-network for hostname "edicta" i modified /etc/hosts by hand twice, now do not remember what i did exacly but here you can see /etc/hosts
[Code]....
View 2 Replies
View Related
Dec 28, 2010
The problem I'm having is on a CentOS4 machine. I don't use CentOS regularly (Ubuntu and Mint, yes) so I'm not sure if this is something that is particular to CentOS or not. I have this workstation that controls a microscope controller. The drives in this computer are some POS Seagate drives where the data storage drive has already conked out more than once. I think this time there was a problem with the OS drive that caused a lot of filesystem errors. I wasn't able to boot the OS at first but I ran fsck from a liveCD and was able to fix the (hundreds of) errors and the OS can now boot from the drive. The problem ave now is the ethernet does not work. I know there's not a problem with the ethernet controllers because I can access the internet through the liveCD. When I try to activate eth0, or eth1, I get the following error:Quote:
Cannot activate network device eth0!
network-functions: line 180: ip: command not found
WARNING: /lib/modules/2.6.9-89.0.9.ELsmp/modules.symbols line 1: ignoring bad line starting with 'GROUP'
[code]...
View 2 Replies
View Related
Apr 16, 2011
Reboot and select proper boot device or insert boot media in selected boot device and press a key. I got this error after: Reducing my Windows 7 partition by about 100gb. Creating a new partition (100gb) and copying my Ubuntu partition (10gb) to the new partition. After it was copied, and pasted, the original partition was deleted. I now had two partitions a new 100gb Ubuntu partition and a 600gb (or so) Windows 7 partition.
All of this was done using a bootable USB with Ubuntu 10.10 and GParted partition editor. Now when I boot I get the "Reboot and select proper boot device or insert boot media in selected boot device and press a key." error.
View 9 Replies
View Related
Sep 6, 2009
I'm a newbie on Linux and trying to find my feet so please be kind.I have installed vmware on my XP laptop and have installed fedora core 9. Network setting on the VMware is set to bridged. My interface eth0 which is using the wireless does not start on boot. I have to run ifup ifcfg-eth0.The file ifcfg-eth0 had onboot=yes and NM=no, so i changed it so that the NM=yes.However this does not resolve the problem at all. I have put the file back to its original configuration and I have disabled network manager and have had no luck
View 2 Replies
View Related
Nov 23, 2009
This was working and stable on f-10 and f-11. Fresh f-12 install including openvpn, Copied /etc/openvpn/* to new system as root from working f-11 syatem. /etc/init.d/openvpn start (and stop) works as advertised HOWEVER when set to start at boot using chkconfig or Services Configuration program, openvpn does not start. I must manually start it every time. When started, it does work without error messages in the log.
I tried removing the NetworkManager-vpn module with no effect. Thought it could somehow be overriding the auto startup of openvpn at boot.
View 6 Replies
View Related
Nov 5, 2009
How do I configure a network bridge to start on boot?
I have two network interfaces eth0 and eth1.
Here is my current network script configuration:
Code:
#/etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
TYPE=Ethernet
HWADDR=00:10:18:4e:5e:a7
[Code]....
The bridge will come up if I restart the network service after boot....but it won't automatically come up when the computer starts.
View 4 Replies
View Related
Mar 6, 2010
Arpwatch is failing to start at boot time. I got this message:
arpwatch: bad interface eth0: eth0: no ipv4 address assigned
Once I login into my account, I can (as root) run the arpwatch demon, but it is suppose to run at boot time. After I installed aprwatch, it was working correctly. I do not have an idea of what happens or since when the problem start to happen. I just realize, after a while , that arpwatch was not running. I am running Fedora 12 - 2.6.32.9-67.fc12
View 4 Replies
View Related
Aug 19, 2009
5.10 Breezy configured as machine controller. Works great eth0 is a fixed IP to communicate with controller comms board. Not easy at all to alter - the comms board is hard coded to listen on eth0 for commands.
I can use eth1 as the default gateway and ping google.com, etc. But when I now attempt to communicate with the controller with netcat, e.g.
Code: echo !HH | nc 192.168.1.6 80
I obviously never get an answer since the request is passed via eth1. Using the -g option with netcat doesn't work either. I had a look at iptables but it doesn't seem to be able to do what I want. How I can still use eth0 as my communication port to the controller whilst eth1 is the default gateway?
View 17 Replies
View Related
Jul 1, 2010
I have two servers on a vlan at my datacentre/colocation and previously both servers had public IPs on their eth0 interfaces. The servers are HP ProLiant DL360s - one is a G4 and one is a G5 The newer G5 is now the LAMP server and the G4 has been retired and I want to repurpose it as an iSCSI target using openfiler freenas or similar.
My G5 has public/static IPs lashed to the eth0 physical interface and the eth1 is not configured to do anything yet. The G4 will have both interfaces available - perhaps one for ssh access from one of my static public IPs and the other to be a private IP on the local vlan. Here is what I am trying to get my head around...
The G5
eth0 - Public IP - full LAMP services on two or three virtual interfaces
eth1 - Private IP 192.168.0.1
The G4
eth0 - Public IP for ssh
eth1 - Private IP 192.168.0.2
Because my traffic between eth1 on these boxes is via private IPs on the local private vlan it doesn't add to my quota for bandwidth. How do I go about configuring the routing and gateways and other aspects of this so that I can run a private IP space network between the eth1s and still serve the outside world from the eth0s...
I am afraid that if I assign the private IPs to the eth1 interfaces the routing may either not work or interfere with the access to the production internet facing interfaces (eth0s).
View 10 Replies
View Related
