Ubuntu Networking :: Auto Eth0 Not Connecting 10.04?
May 2, 2011I can't figure out why my ethernet isn't recognizing its connection. ifconfig returns the hardware address, route -n returns an empty table
View 9 Replies
ADVERTISEMENT
Ubuntu Networking :: Eth0 Isn't Connecting To Router?
Jul 18, 2010I downloaded wubi, installed ubuntu, and booted it up. Everything went smooth, it finished installing with no problems. It restarts again and I login. Firefox opens.....server not found.
That brings you to where I am now. It says that eth0 is connect. I manually changed the ip address, the netmask and gateway. Still I have no luck.
route reads as follows:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.1 * 255.255.255.255
[Code].....
Ubuntu Networking :: No Auto Eth0 On One Lucid Box?
Jul 30, 2011so I now have 4 Ubuntu Lucid LTS installations - terrific - but the alternative Ubuntu boot on this particular PC (all made from the same Live CD) does not have any eth0 configured, so I cannot reach even my router. I can look at the eth0 properties with "Network tools" and it has no IP or MAC. I have the network notification gremlin installed but it does not appear on the top panel. {"eth0" hardware works under Win XP, hence this post}.
I'm a novice at Ubuntu, and I am at a loss. I realise that networking is supposed to be automatic, no 'tool' should be needed, but what can I do when it has not configured?
Ubuntu Networking :: Auto Eth0 - Network - Won't Connect ?
May 2, 2010Upgraded To Ubuntu 10.04 The Other Day. And when I first installed it everything worked great except for my sound card which I fixed. But there was no problem with connecting to my Router via an Ethernet cable. Then I updated the video card drivers, restarted my PC and it wouldn't connect. It would try over around 1-2 mins then tell me its disconnected. No green light activity on the router / network card either.
I've reinstalled fresh copies of Ubuntu a couple of times now, Hoping to get the default settings back. But nothing has worked since.
I looked around the net and found quite a few people had this problem on previous versions of Ubuntu but it would seem most of there fixes were for there Version, so it hasn't helped me.
Heres some info:
ifconfig:
I've tried all the various things from dhclient to ifup/ifdown etc etc.
Ubuntu Networking :: Easytether + Auto Eth0 Not Working?
Oct 24, 2010I'm using Easytether through my HTC Droid for interwebs running Ubuntu 10.04. However I also have a home network. However when I hardwire into the network via a D-Link router (Auto eth0) my internet no longer works. The same is true when I plug in my iPod. The Droid loses it's connection. What is the problem?
View 2 Replies View RelatedUbuntu Networking :: Auto Eth0 Connected But No Network
Jul 21, 2011I am using BSNL broadband ISP and I am able to get network on windows os but not on my ubuntu.( I have a dual boot). I see Auto eth0 connected from the notification but when i am pinging [URL]... it says unknown host.
View 9 Replies View RelatedNetworking :: Auto Start Eth0 In Fedora 14?
Jan 6, 2011my eth0 connection is not automatically connected when fedora starts. I checked " activate device when windows starts" in network configuration. still it is not auto connecting and after connection the network icon is not changing to connected status although it is connected.
View 4 Replies View RelatedUbuntu Networking :: Lan Setup - Connecting To Eth0 Then Network Disconnected
Dec 22, 2010i have limited experience with Ubuntu and Linux for that matter. i know my way around for the most part but i come from windows. anyway. i have 6 dell gx260 computers. i also have a netgear 8 port Ethernet switch. now im just trying to get the computers to see each other. simple for me in windows. but i have no idea where to start here. it just says connecting to eth0 then network disconnected. and thats it. for now im just working with 2 of the computers. the others are not set up yet. i have been googling for 3 days and got nothing that helps. (my goal after they see each other is to share files back and forth. and also to have one of them control the others with some type of remote desktop. but thats for another day.)
View 1 Replies View RelatedUbuntu Networking :: Network-Manager Reverts Back To Auto Eth0
May 3, 2010I'm running Kubuntu 10.4. My problem is that Network Manager keeps defaulting back to Auto eth0. I have created a new wired connection and set my manual addresses. I have ticked the 'connect automatically' button. Every time I reboot or wake up it reverts back to Auto eth0.I did have wicd installed but this was not reconnecting after wake up (said it was connected but I couldn't ping etc), this is a pain also.
View 9 Replies View RelatedUbuntu Networking :: Messed Up /etc/network/interfaces - Original Auto Eth0 Setup Is Missing
May 24, 2010I'm trying to setup my interfaces along side GNS3 for study purposes, and came across a ..... vid saying to try this (my current config)
[Code]....
I'm praying for some crappy syntax error, also in Network Connections... its now blank, the original auto eth0 setup is missing
Ubuntu :: 9.04 - No Network Connection (Auto Eth0 Set To Never)
Dec 13, 2010When I log onto my Ubuntu 9.04 boot I am disconnected from the internet, on my windows 7 boot It works just fine, I have attempted disabling networking, power cycling the modem and router, and re-enabling networking, no dice though. hovering over the connection icon tells me that there is no network connection.
Opening the edit connections window tells me that there a wired connection called Auto eth0 that is set to never, and that is all that I can find. I hunted for other forums on this and found a few but none with a successful resolution.
OpenSUSE Network :: Set Auto Eth0 IP Address?
Apr 13, 2011I want to set my desktop IP address to always be 192.168.1.2. The NetworkManager connects to the network automatically and the IP address is assigned randomly. I can set up another connection in NetworkManager and always change over. But is there any way to make the default eth0 interface to be permanently set to a certain address (using NetworkManager, not ifup)?
View 9 Replies View RelatedFedora :: Unable Get Wireless Working After Connecting To Eth0?
Aug 12, 2010I installed F13 on an Acer laptop for a friend who is just beginning with Linux. This laptop has the dreaded Broadcom chipset and is using the b43 driver. When it was first installed, wireless was automatically detected and worked fine. However, as usual, there was about 200MB of updates after the install, and the wireless was downloading extremely slowly, so I connected eth0 just to complete the updates. Ever since, the wireless will not work. When the machine is booted, wireless is shown as disabled in Network Manager. I remembered that there was a wireless switch on the front of the laptop and switching it on allows me to check the enable wireless box, but wireless says device not ready.
ifconfig wlan0 up returns:
Code:
SIOCSFFLAGS: Operation not possible due to RF-kill
I assumed this meant that the switch was in OFF position, but it is not. iwconfig shows the wireless is detected. It appears that there is a script for rf_kill somewhere in the filesystem that is keeping this from working.
Networking :: Eth0 Fixed IP - Eth1 DHCP Gateway - Access To Eth0?
Aug 19, 20095.10 Breezy configured as machine controller. Works great eth0 is a fixed IP to communicate with controller comms board. Not easy at all to alter - the comms board is hard coded to listen on eth0 for commands.
I can use eth1 as the default gateway and ping google.com, etc. But when I now attempt to communicate with the controller with netcat, e.g.
Code: echo !HH | nc 192.168.1.6 80
I obviously never get an answer since the request is passed via eth1. Using the -g option with netcat doesn't work either. I had a look at iptables but it doesn't seem to be able to do what I want. How I can still use eth0 as my communication port to the controller whilst eth1 is the default gateway?
Networking :: Production Server With Static IPs On Eth0 And Eth0:1 - Getting Private LAN On Eth1?
Jul 1, 2010I have two servers on a vlan at my datacentre/colocation and previously both servers had public IPs on their eth0 interfaces. The servers are HP ProLiant DL360s - one is a G4 and one is a G5 The newer G5 is now the LAMP server and the G4 has been retired and I want to repurpose it as an iSCSI target using openfiler freenas or similar.
My G5 has public/static IPs lashed to the eth0 physical interface and the eth1 is not configured to do anything yet. The G4 will have both interfaces available - perhaps one for ssh access from one of my static public IPs and the other to be a private IP on the local vlan. Here is what I am trying to get my head around...
The G5
eth0 - Public IP - full LAMP services on two or three virtual interfaces
eth1 - Private IP 192.168.0.1
The G4
eth0 - Public IP for ssh
eth1 - Private IP 192.168.0.2
Because my traffic between eth1 on these boxes is via private IPs on the local private vlan it doesn't add to my quota for bandwidth. How do I go about configuring the routing and gateways and other aspects of this so that I can run a private IP space network between the eth1s and still serve the outside world from the eth0s...
I am afraid that if I assign the private IPs to the eth1 interfaces the routing may either not work or interfere with the access to the production internet facing interfaces (eth0s).
Ubuntu :: Network Manager In Lubuntu - Cannot Get Auto Eth0 To Connect To Send Out As A Share
Aug 19, 2010If I made a distro from scratch it would have been Lubuntu, cept I'm sure my theming would have been horrible. Now Ive installed on a couple of my Laptops, and even had a few friends convert, and for the most part everything is hunkus doris, cept one small issue thats keeping me from slapping it on my trusty laptop. I'm lost as to what the problem could be. Ive tried just about all I can think of, but I use sprint mobile broadband to connect to the net and then use Network Manager to share this connection with the laptops and Palmtops around the house. I can get my sprint modem to connect thats not a big problem the problem is now I cannot get the Auto Eth0 to connect to send out as a share. It just refuses to connect. Now this is not a Lubuntu problem at all Im sure its somehow a Lxde problem, as Mint Lxde, PeppermintOS, and so on do the same thing, refusing to connect Auto Eth0 while Sprint is connected. Any Gnome based distro this works flawless, as does Xfce distros, so Im sure this is somehow something within Lxde. Im sure its down to just "missing" a file or some stupid overlooked thing.
View 3 Replies View RelatedNetworking :: Ignoring The Unknown Interface Eth0=eth0?
Dec 18, 2010I'm running a dual boot Ubuntu 10.04/Backtrack 4 (Ubuntu 8.10) system. I can get internet in the BT4 side but not in the Lucid side. In Lucid I can ping my router, and the network manager says I'm good to go, but I can't get to any web sites. It all started when I tried to put my laptop on another network by mimicking the settings of a computer I had just unplugged from the network. MAC address and all.
ifconfig eth0:
Code:
eth0 Link encap:Ethernet HWaddr 00:1f:16:ba:4c:8c
inet addr:10.136.9.147 Bcast:10.136.9.159 Mask:255.255.255.240
inet6 addr: fe80::21f:16ff:feba:4c8c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]....
Ubuntu / Apple :: Magic Trackpad Not Auto Connecting?
May 23, 2011I have an HP 6735s laptop that I have connected an Apple Wireless Keyboard and Apple Magic Trackpad to via bluetooth on 11.04.
When I login the keyboard automatically connects via bluetooth (once the gnome-bluetooth applet boots), however, I need to manually go into the applet and click connect for the trackpad. I can then run a script to start touchegg.
How I do set up the trackpad to auto-connect? I am guessing the built-in trackpad on the laptop is overriding it?
General :: Connecting To Network - Other Host Cannot Ping - Eth0 Not Showing In Ifconfig Report - Ver1.qu1
Jan 13, 2010i know this is crazy, but im using a [URL] and have loaded a copy of "red hat linux 7" on the computer. i have no idea what kind of hardware config/spec stuff i should have in my immediate vision, and if i did i'm not sure how i would make sense of it all. linux loaded fine. didnt save drivers. eth0 not showing in ifconfig report, but lo is connecting to network, other host cannot ping linux and vice versus
can mount a cdrom, but not a usb flash dont quite understand how the load methods work involving /mnt/cdrom/"usbutils-0.86tar.gz" eth0 problems and gnome rpm stupidity keeps me from upgrading sys from old version to a newer version, cant even find the cmd to show me that info, sorry. have usb files i want to mount, dont know how to loAD THE CDROM FOLES, SO EVEN THAT ISNT WORKING OUT HAVE DISCS WITH howtos just need to stay focused on steps to get desired end result, while trying to learn too much info for what im currently doing between all the f!@#@ing windows i have open.
Software :: Auto-connecting The Bluetooth Devices?
Sep 5, 2010I have bluetoothd,hidd,and bluez-simple-agent running. I can manually connect my if I use
Code:
"hidd --connect XX:XX:XX:XX:XX:XX"
However, I cannot get bluetoothd to make any sort of connection automatically. I have hidd running as a server, I see link_key_request(sba=XXXXX,dba=XXXXX) in dmesg when I click the mouse, but I get no connection.
Ubuntu Servers :: 10.10 - Setup Eth0 With Subdevice Eth0.0 And Eth0.99 To Come Up At Boot
Apr 22, 2011im trying to setup eth0 with subdevice eth0.0 and eth0.99 to come up at boot
eth0 is dhcp clint
eth0:0 is static ip
eth0.99 is 802.1q vlan interface
/etc/network/interfaces
Code:
auto lo
[Code]....
OpenSUSE Install :: Logging In And Auto Connecting Wireless Access?
Sep 1, 2011I just recently switched to openSUSE 11.4 from Ubuntu 10.10 so I am very new to this distro and Linux in general. My question is this.Is there a way to make it so that I don't have to keep entering my root password in order for the OS to connect to my wireless?Every time I login the KDE Wallet Service pops up and asks for my passwordI know that it is there for security and what not but it'd be nice if I could just login and the laptop connects to the point without needing a password every time
View 1 Replies View RelatedUbuntu Networking :: 9.10 Not Connecting To Internet At Home But Connecting From Work
Feb 9, 2010I just installed Ubuntu 9.10 and its great. However when I connect to the internet at home it shows that the connection has been established but I still cant connect to the internet. My flatmates are all able to connect. However, I am able to connect from work both wirelessly and through an ethernet cable.
View 2 Replies View RelatedCentOS 5 Networking :: Kernel Rpm Install After Error "Bringing Up Interface Eth0: Device Eth0 Has Different MAC Address Than Expected, Ignoring"
Dec 26, 2010i install kernel rpm after i boot that kernel network not working kernel name : kernel-rt-trace-2.6.24.7-132.el5.centos.i686 [URL] error "Bringing up interface eth0: Device eth0 has different MAC address than expected, ignoring."
View 1 Replies View RelatedGeneral :: Auto-starting Nautilus When Connecting A Card Reader (debian, Gnome)?
Mar 17, 2011Currently when I connect a card reader (with a card inside, of course) gnome auto-starts gphoto. However I don't use gphoto and I would like gnome to auto-start nautilus instead
View 5 Replies View RelatedNetworking :: Sending Video Streams From Eth0 And Eth1 To The Other Server Programs' Eth0 And Eth1?
Jul 30, 2010I try to generate a server client code. What i try to do is sending video streams from eth0 and eth1 to the other server programs' eth0 and eth1. In order to do that, i decided to use SO_BINDTODEVICE. But the code is not working. Am i misunderstood the usage of SO_BINDTODEVICE.
1-Defining two ports
2-Defining two sockets
3-Assigning host ips on them
[code]....
Networking :: Ethernet Auto-connect / Auto-sense Doesn't Work
Feb 3, 2011I have noticed that a common issue to several distros is the fact that the networking subsystem doesn't automatically detect the link if an ethernet connection is disconnected and then re-connected to the NIC after boot. If the ethernet cable is connected after the system is up and running, nothing happens - ethtool eth0 shows link detected: no, and you have to restart the network service to let the NIC know that there is in fact a link, and actually connect. I have a Fedora14 (KDE) box with a brand new Asus motherboard with embedded NIC. Everything works great except the auto-detect of a freshly connected ethernet connection if the link is down to begin with.
Am I missing a ethernet link sentinel utility or something, or is this just the way linux works? I have done plenty of research on plenty of posts, and it seems this is a common problem, with no solution other than manually or programatically restarting the network service in a script to detect the link after a disconnect.
Networking :: Kernel - Forward Packets From Eth0 To Eth1 And Eth1-to Eth0 As Well As Get A Copy Of These Packets For Analysis
Sep 27, 2010I have a hardware device with two ethernet ports, eth0 and eth1 running Centos 5. Basically my goal is to forward packets from eth0->eth1 and eth1->eth0 as well as get a copy of these packets for analysis. If I set IP routing to do the forwarding then I won't get a copy of the packets for analysis.
View 3 Replies View RelatedUbuntu :: What Is The Difference Between "auto Eth0" And "Wired Connection 1"
Aug 5, 2011Using Lucid.
Both "auto eth0" and "Wired connection 1" appear in my network app. See screenshot. I only have one Ethernet card.
is the latter just a rename of the former? I thought so, but the "Wired connection 1" seems to be more reliable than "auto eth0"
General :: Stop And Restart Ethernet Connection Ubuntu 9.10 - Ignoring Unknown Interface Eth0=eth0
Mar 8, 2010If I uncheck and recheck "Enable Networking" in the Network Manager Applet 0.7.996 I would expect the wired network to disconnect (which it does) and reconnect (which it does NOT). So I tried sudo ifdown eth0 and got
Quote:
Ignoring unknown interface eth0=eth0.
ifconfig tells me
Quote:
eth0 Link encap:Ethernet HWaddr 00:25:64:e8:18:2c
inet addr:192.168.0.112 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::225:64ff:fee8:182c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]....
so I am at a loss. How do I stop and restart the network interface short of rebooting the machine?
