Networking :: Eth0 Does Not Work After Shutdown/start But Works When Restart
Sep 13, 2010
When I shutdown computer and start it up, eth0 doesn't seem to show up (though lspci sees ethernet card and modules are loaded). When i reboot (which is exactly the same, in my opinion), it works good. I'm using Sabayon GNU/Linux, Gnome Network Manager applet.
>uname -srm
Linux 2.6.34-sabayon x86_64
>sudo lspci | grep Ethernet
00:19.0 Ethernet controller: Intel Corporation 82578DC Gigabit Network Connection (rev 05)
View 2 Replies
ADVERTISEMENT
Jan 18, 2010
I have a Proliant DL 120 G5 with CentOS 5.4 and I have installed a Brodcom Corporation Netxtrem BCM 5722 Gigabit Ethernet PCI. So I have two interfaces: eth0 broadcom eth1 Intel The eth1 works, instead eth0 don't work. I can ping itself and 127.0.0.1 but I can't ping the gateway. The results of netstat -nr is:
[code]....
View 1 Replies
View Related
Feb 6, 2010
The start menu in kde 4 is broken. Shutdown and restart are missing.
I hope they weren't removed for some wacky paranoid security reason. My Linux partition is encrypted and I use strong passwords. Any sensitive files or folders that I have are also encrypted.
The switch user doesn't work. Although present, they just either lock the user's screen with a password needed to log back in or log out the user entirely. Linux is, last I heard, a multi-user capable operating system. The switch user button never really worked well at all & I usually avoided using it.
Even XP can handle this sort of challenge. When I was running Fedora 7 with KDE 3.something or other, these functions worked flawlessly. They also worked under Fedora 8.
The logout button appears to work properly. I had a whole bunch of updates to install, resulting in the start menu breaking. The damage is restricted to KDE. The updates have improved my wireless connection, sound quality and speed.
I'm running the newest kernel for Fedora 11, which is what I'm using with KDE 4. I would rather not break KDE entirely or have to use another desktop. I tried fluxbox, but I would like to stick with KDE. What I'm worried about is whether or not KDE will simply continue to deteriorate or break entirely.
View 12 Replies
View Related
Jun 17, 2010
I upgraded to 13.1 and found the restart, shutdown buttons do not work. I have to resort to the terminal commands init 6, or poweroff. I then tried to install flash plugin. I modified the slackbuild script as per normal. Then issued the following command which seemed to succeed. But when I try to play utube movie it says flash is not installed. Do I need to rebuild the system?
Code:
root@redeemer:/tmp# installpkg flash-player-plugin-10.0_r45-x86_64-1_SBo.tgz
Verifying package flash-player-plugin-10.0_r45-x86_64-1_SBo.tgz.
Installing package flash-player-plugin-10.0_r45-x86_64-1_SBo.tgz:
Package Description:
# flash-player-plugin (flash plugin for web browsers)
# Provides Adobe Flash plugin for browsers that recognize
# /usr/lib(64)/mozilla/plugins as a valid plugin directory
# Plugin is subject to Adobe terms of use:
# [URL]
# Plugin is subject to Adobe Flash EULA:
# [URL]
# Package flash-player-plugin-10.0_r45-x86_64-1_SBo.tgz installed.
View 14 Replies
View Related
Mar 8, 2010
I am running Fedora 12 with KDE on an Acer Aspire One netbook.
A recent update has caused the KDE shutdown/restart/logout buttons (found for example through the Fedora -> Leave menu or by pressing the power off switch)to stop working. I am having to shutdown using shutdown -P now command.
So I have the following questions:
a) Has anyone else had this issue and knows a workaround/fix?
b) Does anyone know what package these belong to so I can try an older version?
c) Does anyone know where this package writes its logs, or if I need to install anything for it to do so so I can have a look?
d) Does anyone know the command-line interface to these commands - that may give me either a more gentle workaround than shutdown -P now, or some insight into why the command is no longer working.
View 3 Replies
View Related
Mar 8, 2010
If I uncheck and recheck "Enable Networking" in the Network Manager Applet 0.7.996 I would expect the wired network to disconnect (which it does) and reconnect (which it does NOT). So I tried sudo ifdown eth0 and got
Quote:
Ignoring unknown interface eth0=eth0.
ifconfig tells me
Quote:
eth0 Link encap:Ethernet HWaddr 00:25:64:e8:18:2c
inet addr:192.168.0.112 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::225:64ff:fee8:182c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]....
so I am at a loss. How do I stop and restart the network interface short of rebooting the machine?
View 9 Replies
View Related
Apr 17, 2009
I'm running fc10 x64 - latest updates. First I could never get wake on lan to work - spent days working on that one. Now, when I restart after a hibernate my eth0 is not re-enabled or recognized anymore. About to give up on Fedora.
I've tried service network restart.
I've tried unplugging cable and plugging back in.
I've tried init.d/networkmanager restart.
Only reboot works.
I've spent so much time trying to configure Fedore Core 10 for a Dynamips server and it's just not ready on some of the essential things like this hibernate problem and also wake on lan.
View 3 Replies
View Related
Jan 21, 2011
I run apache on a non standard port(82).I just installed unity to play around with it and while I was playing with it I installed prixfixe through software center to edit the menus.While prixfixe was installing my computer was acting very slow which was odd, but not completely unusual.During this time I ran ps aux which showed that my apache server was taking up most of the processing power.I was about to stop my web server,but I waited just in case the web server was updating a few things (I run ampache).
My computer finished installing the software and then I ran some command with sudo (I can't remember what the command was), but it threw back some message saying "setid blabla". I restarted my computer and when I got to my gdm my normal user account did not show up. There were no accounts and the restart/shutdown buttons didn't work.Now I'm running on a livecd and checking out my apache access logs, apache error logs,and kernel logs,but nothing looks out of place..
View 9 Replies
View Related
Jan 20, 2010
i've just installed ubuntu 9.10, and i was browsing the internet fine using the live cd, but once i installed it to disk eth0 wont connect or even show it's all greyed out. lspci reporgts :Ethernet Controller Sundance Technology Inc /IC Plus Corp IP1000, ifconfig finds eth0 no problems i think it mihgt have something to do with root privs
View 1 Replies
View Related
May 14, 2010
Ok, so eth0 is up and working great. eth1, however, comes up with a link light, however the packet counters in ifconfig remain at 0. Appears that eth1 isn't working.
Here's my setup:
-Dell latitude CPi laptop with 2 PCMCIA network cards and no built-in ethernet.
-Slackware v11
-eth0 is connected inside my router on my 192 network. Static address with good connectivity
-eth1 is connected on the other side of my router in promiscuous mode in order to listen to the traffic coming into my network.
Troubleshooting so far: I have switched the pcmcia cards between slots and regardless of which card is in eth0 or eth1, eth0 works and eth1 does not. I have also switched the card dongle between cards as well as the ethernet cabling between the cards. With any of the combinations eth0 works like a champ but eth1 does not, so I think I've ruled out hardware problems.
View 14 Replies
View Related
May 13, 2011
This is my first use of Ubuntu, but I have previous decent experience on Centos & Mandriva. I've just installed Natty 11.04 on a box that was running a mandriva 2010 - and the network is acting quite strange. When I define a static IP for eth0 through the gui, along with route & dns, it sort of works: ssh is fine, vnc too. However, I have an asterisk running on the box, and it is wild: some packets get lost in the box.
An ngrep shows the packets reaching the interface, but they dont show in asterisk !!! I've done a ufw disable, iptables is empty (why cant I service iptable restart btw ?). ip route list show decent routes (eth0 default); When I switch to DHCP, it is better, but unstable... If i plug a wifi usb stick, it seems to be better... Is there some known issues that could explain this behaviour ? The nic is a: Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller
View 5 Replies
View Related
Oct 22, 2010
Here is my problem: I am using ubuntu 10.10 64 bit installed on a HP tx2 1274nr laptop. I can get my wireless to work on both the Broadcom B43 wireless driver and the Broadcom STA wireless driver. Though only one can be active at a time.
My problem lies in I can activate either driver until I reboot the laptop. then it becomes inactive.
Is there a fix for this problem. I would like to have my wireless active after restarting.
View 4 Replies
View Related
Jul 9, 2010
I can't start eth0 and have read thru many of the threads on this and can't figure it out. What does this message mean?
Code:
[jeff@chladni ~]$ ifup eth0
Active connection state: activating
Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/13
[Code]....
View 1 Replies
View Related
Jan 6, 2011
my eth0 connection is not automatically connected when fedora starts. I checked " activate device when windows starts" in network configuration. still it is not auto connecting and after connection the network icon is not changing to connected status although it is connected.
View 4 Replies
View Related
Mar 29, 2010
I just finished installing Fedora 12 on a rack mount server. I was modifying the /etc/sysconfig/network-scripts/ifcfg-eth0 file to use a static IP address, but now nothing works. The device does not boot on start up or anything.Currently, ifcfg-eth0 looks like:
Quote:
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=none[code].....
The eth0 device does not start on boot; the server does not get the IP address, is not reachable over the network, and will not connect to the internet....
View 2 Replies
View Related
Oct 3, 2010
Here's my current setup:Ubuntu 10.04
When I go to run it via this command:
I get the following error message:
Quote:
This is my /etc/bind/named.conf.options file:
Code:
I've looked at various solutions already:
[url]
[url]
[url]
[url]
[url]
[url]
View 2 Replies
View Related
Mar 29, 2009
I've a desktop running Fedora 10 connected to the Internet via LAN. There's 3 network controllers in the desktop. One integrated to the motherboard and two additional. I would like to connect other computers (two laptops, one running fc9 and the other Window$ XP) to the Internet via the desktop. I googled the question and found out that I need to adjust thing called 'NAT'.
For that purpose I did the following:
iptables -t nat -A POSTROUTING -s 192.168.2.0/24 -j SNAT --to-source 192.168.*.*
where 192.168.*.* - is desktop' IP address. I want to use 192.168.2.0/24 as a network for laptops. I activated one of devices (eth1), gave it IP address:
ifconfig eth1 192.168.2.0/24
and connected f9 laptop to it.
On the laptop I activated eth0 with the same IP. The problem is: it doesn't work. I can't ping anything from the laptop except its own address (192.168.2.0).
View 4 Replies
View Related
Apr 30, 2011
my internet was fine.. until.. i had to work in the school so.. a teacher configured the internet settings.. for something .. ( i don't remember) and everything was fine. but when i returned to my house and conected my lap to internet (cable) the internet didn't work.
ubuntu@VR:/etc/network$ ifconfig
eth0 Link encap:Ethernet direcci�nHW 00:1d:72:46:38:3c
Direc. inet:192.168.1.65 Difus.:192.168.1.255 M�sc:255.255.255.0
Direcci�n inet6: fe80::21d:72ff:fe46:383c/64 Alcance:Enlace
[Code].....
View 9 Replies
View Related
Jul 1, 2011
Everything worked fine until very recently, and without apparently ANY change to the settings on the server, a secondary IP that was assigned to my server won't work anymore..Any IP attached to the same server works fine.. So in my case, the problematic IP is 213.8.155.67. The other IP (213.8.155.42) works without any problem.How would I go about troubleshooting this?
ifconfig:
eth0 Link encap:Ethernet HWaddr 00:26:B9:44:11:3A
inet addr:213.8.155.33 Bcast:213.8.155.127 Mask:255.255.255.128
inet6 addr: fe80::226:b9ff:fe44:113a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]...
View 3 Replies
View Related
Jan 26, 2011
I have installed the Squeeze testing version. i have setup networking for static in the /etc/network/interfaces file. tried to find resolv.conf in the /etc/ since could not find i created this file post trying to start the eth1 i am able to ping my ip, but if try to ping the gateway i get an error saying the ping is not sucessfull. I have 2 network cards, eth0 and eth1. as eth0 does not work i have configured eth1. The dump of the interfaces file is below
[code]...
The same setup works fine in Ubuntu 10.10 setup that i have.
View 3 Replies
View Related
Mar 13, 2011
I am running the latest ubuntu and I am having trouble getting networking sorted. I have 2 networks, one wired (eth0) and one wireless (wlan0). I connect to the internet using wireless. The problem is that I can only successfully connect to the internet if I disconnect from eth0. I have hit this problem with Windows machines and the solution was to adjust the "interface metric" in "Advanced TCP/IP Settings" so that the wireless was the preferred connection. How can I achieve something similar in Ubuntu?
View 1 Replies
View Related
Apr 14, 2011
Problem: Can't get bridging to work properly.
I'll start by saying that most of this is built inside of a 64bit ESXi 4.1.0 server. Should be obvious by the picture below.
Trying to set up a bridged CentOS box. Ultimate goal is to set up a Transparent Firewall. The machine labeled 'Desktop' is a Windows XP running DHCP. It gets assigned an Internet routeble IP address. At this point, nothing is running a firewall.
Symptoms:
Gateway can ping CentOS bridge
CentOS bridge can ping gateway
CentOS bridge can resolve DNS names and ping FQDNs on the Internet.
CentOS bridge CAN NOT ping Desktop
[Code]....
View 12 Replies
View Related
Mar 12, 2009
I cannot get static addresses to work on eth0 and eth1. eth0 seems to use DHCP while eth1 uses the static information. Sometimes the static info is used but the interfaces get the addresses reversed.
From /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=mosaic
[code]....
View 5 Replies
View Related
Feb 28, 2010
I am trying setup nfs mount points on my system. when i try to restart nfs-common servic, I get following error. client :~ sudo /etc/init.d/nfs-common restart bash: /etc/init.d/nfs-common: No such file or directory
apt-get install nfs-common gives this message :
apt-get install nfs-common
Reading package lists... Done
Building dependency tree
Reading state information...
nfs-common is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.what am i doing wrong? I'm running Linux client 2.6.31-19-generic #56-Ubuntu SMP Thu Jan 28 02:39:34 UTC 2010 x86_64 GNU/Linux (karmic)
View 2 Replies
View Related
Feb 23, 2011
I'm currently running Fedora 13, after I updated the kernel to 2.6.34, I have to run (as a superuser) "service NetworkManager start" in order to start my network manager, is there are way I can run this on startup?
Also my ethernet connection seems to only work when I restart/boot up my computer, when I wake my computer up from being asleep, the ethernet stops working.
View 2 Replies
View Related
May 17, 2010
I have a recently new, less than 2 weeks old, Ubuntu 10.04 LTS installl. It is a clean install since the prior install of 10.04 LTS decided it would no longer allow me to login.
My problem is that I cannot shutdown or restart my machine. And I have no idea why it happened.
View 9 Replies
View Related
Apr 28, 2011
I have just installed 11.04 on my Acer Z5610 and it won't shutdown or even restart noramally. I have to force shutdown every time. I installed the ati graphics drivers but still no change. What could be wrong?I have reinstalled 4 times, using usb and cd.
View 9 Replies
View Related
Jul 8, 2011
I have assembled an Intel D915PDT Administration Intel Desktop motherboard with an Intel 651 Processor which has 3.40 GHz 800 MHz FSB 2MB L2 Cache and 1GB DDR1 400 MHz RAM also GeForce 8400GS 512 Graphics Cards. But this PC have a problem, if once I shut it down I cant restart it again, but the next day it works properly. I tried in various operating systems like Windows XP service pack 2, pack 1, Windows 7 Professional and Ultimate 32bit and I have checked several times the BIOS settings properly but the problem is still the same.
View 1 Replies
View Related
May 20, 2011
When I ping a destination IP address, it responds. However, when I try to telnet or ftp or sftp to the same IP address, it does not connect.
I do not know the physical location of the machine.
View 11 Replies
View Related
Aug 19, 2009
5.10 Breezy configured as machine controller. Works great eth0 is a fixed IP to communicate with controller comms board. Not easy at all to alter - the comms board is hard coded to listen on eth0 for commands.
I can use eth1 as the default gateway and ping google.com, etc. But when I now attempt to communicate with the controller with netcat, e.g.
Code: echo !HH | nc 192.168.1.6 80
I obviously never get an answer since the request is passed via eth1. Using the -g option with netcat doesn't work either. I had a look at iptables but it doesn't seem to be able to do what I want. How I can still use eth0 as my communication port to the controller whilst eth1 is the default gateway?
View 17 Replies
View Related
