Fedora :: F12 - DHCPD Will Not Auto Start?

Feb 16, 2010

On my local network, I use my Linux machine running dhcpd and IP masquerade as a gateway to the internet. As it is, the setup works just fine, and I've enabled dhcpd in all runlevels in the services dialog, but for some reason, it still does not automatically start when I boot the machine. If I select it and click "Start", it operates normally, and if I run "services dhcpd start" from a command line, that works too. My only guess is that it's some problem with my config file... it's the same setup I used with previous versions of Fedora without issues, but maybe things have changed?

The contents of /etc/dhcp/dhcpd.conf:
Code:
ddns-update-style interim;
ignore client-updates;
subnet 192.168.1.0 netmask 255.255.255.0 {
option routers 192.168.1.8;
option subnet-mask 255.255.255.0;
option domain-name-servers 64.59.176.13, 64.59.176.15, 64.59.177.226;
option ip-forwarding off;
range dynamic-bootp 192.168.1.100 192.168.1.200;
default-lease-time 21600;
max-lease-time 43200; }

View 3 Replies


ADVERTISEMENT

Fedora Servers :: DHCPD Failed To Start In F11

Jun 21, 2009

For some weird reason dhcpd fails to startup, but when I installed gadmin's dhcpd GUI configuration tool and click activate to start the DHCP server. It works, but for some reason I can't get it to start like a regular service. (Service dhcpd start) Fails without a error code or message.

View 14 Replies View Related

Fedora Servers :: DHCPD Daemon Failed To Start

Mar 5, 2009

I just got the problem while starting the dhcp daemon. Its showing failed. I need to start it for my clients to be autoinstalled. I am having CentOS 5.2 linux. I've installed all optional packages also while installing CentOS. How to start the dhcp daemon? I've tried the /etc/init.d/dhcpd start also. But it didnt work. Showing Failed.

View 1 Replies View Related

Server :: DHCPD Will Start In Debug But Will Not Start As A Normal Service

Jun 7, 2010

I have setup a CentOS 5.5 server as a DHCP server. That will be it's only task in a Cisco callmanger VoIP environment The DHCP server that comes with CentOS 5.5 is from ISC V3.0.5 -redhat.

The server (HP DL360) has two physical NIC's of which only NIC1 is used (ETH0)

ifconfig shows:

Code:

The interface has a fixed IP setup.

My dhcp.conf file looks like this:

Code:

When I start (try to) dhcpd via the service interface or via the prompt as

Code: service dhcpd start

I get an [FAILED] message and the following is in /var/log/messages

Code:

But when I start the DHCPD on the comamnd prompt in debug mode it looks as follows:

Code:

and /var/log/messages shows:

Code:

Why does the system ask a declaration for eth0 0.0.0.0?

View 3 Replies View Related

CentOS 5 Server :: DHCPD Doesn't Start - How To Make It Start

Sep 2, 2010

I'm configuring a new Centos 5.5 server in replacement of an old W2K server.The topology of our network is simple : one file/dhcp/dns relay server and workstations (PC's and some MAC's) plus network printers and scanners.All the workstations have dynamic IP addresses (easier because a lot of 'dynamic' changes : new persons with their own laptop, ...) and the server and printers/scanners have fixed IP addresses.I edited the dhcpd.conf (see here underneath), I have the file dhcpd.leases but it doesn't start !

DHCPD.CONF
ddns-update-style interim;
ignore client-updates;

[code].....

View 3 Replies View Related

Fedora :: Auto Start A Program On Start Up?

Oct 9, 2009

I just installed TuxGuitar - very cool - and to get the sound to work I had to install Timidity++ as well. Before I start TuxGuitar I have to execute:timidity -iA -Osin a terminal window first, which is kind of a pain to do every time I run TuxGuitar.How do I get this line to execute on startup such that timidity is running when I start up? I tried adding that line to rc.local

View 13 Replies View Related

Networking :: Start DHCPD After Network Enabled?

Sep 22, 2010

How can I start dhcpd after Network manager has set up a new connected device. The reason being that dhcpd will not start when there is nothing connected to the network interface. Therefore I would like dhcpd to start after a new device is connected. Now I have found references if ifup-post but this does not relate to NM, is this correct?

View 5 Replies View Related

General :: DHCPD Service Fail To Start

Mar 14, 2010

My dhcpd service get failed every time when I try to start it
1) Actually I have a lan connection which has a static ip network 192.168.10.0/24 and the pc to which is using the dhcpd has a ip address 192.168.10.1/24
2) And I have a internet connection wirelessly which has a network 192.168.2.0/24
Now I want to problem ip address in the network of 192.168.10.0/24

Here below is the configuration file of dhcp server:
# dhcpd.conf
#
# Sample configuration file for ISC dhcpd
#
# option definitions common to all supported networks...
option domain-name "example.org";
option domain-name-servers ns1.example.org, ns2.example.org;
# Use this to enble / disable dynamic dns updates globally.
#ddns-update-style none; .....

View 3 Replies View Related

OpenSUSE Network :: Named Fail To Start (jail) And Dhcpd

Sep 16, 2010

Just for information in case if it is important to start dhcpd and named: Sep 16 20:26:44 LINUX-SRV named[2417]: nss_ldap: could not search LDAP server - Server is unavailable Sep 16 20:26:44 LINUX-SRV named[2417]: nss_ldap: could not search LDAP server - Server is unavailable

Secondly Both config files in /etc/sysconfig set parameters to start in jail root but

[Code]....

View 2 Replies View Related

General :: Dhcpd Can't Create Dhcpd.pid Ubuntu 11.04 (natty)

Jun 20, 2011

I've found a lot of pages of how to fix the issue on older releases of dhcpd and ubuntu.

#>dhcpd
#> ...
#> Can't create PID file /var/run/dhcpd.pid: Permission denied.

I have tried creating the file and giving it permissions to be accessed, but that isn't solving the issue. I tried to go through some of the older fixes, and one was really close to working but lacked the same folders as I have.

EDIT: one solution that worked was to use ln -s /var/run/dhcp3-server/dhcpd.pid /var/run/dhcpd.pid dhcpd3 -cf /etc/dhcp3/dhcpd.conf at0

View 1 Replies View Related

Networking :: Auto Start Eth0 In Fedora 14?

Jan 6, 2011

my eth0 connection is not automatically connected when fedora starts. I checked " activate device when windows starts" in network configuration. still it is not auto connecting and after connection the network icon is not changing to connected status although it is connected.

View 4 Replies View Related

Fedora Installation :: USB Modem Auto Start When OS Booting?

Jun 5, 2011

I have USB Modem ZTE AC2726 . I am always Connect using Wvvdial or Network Manager , it Works Fine , But I want to do that when computer Booting it can auto start but i can�t do this . i have use many rules such as /etc/rc.local or udev rules to failure .I am using Fedora 14.

View 3 Replies View Related

Fedora Servers :: Samba, How To Auto Start Server On Bootup On F1

Dec 18, 2010

Problem I have is the Samba server, it does not seem to start up the shares at boot.When I boot the system, nothing is available on the network, I have to run the Samba Server Configuration Tool everytime I want to access a share, edit a share, save and quit, then my network shares become available.I see Starting SMB services during boot up, it says OK.It worked good on Fedora13.

View 2 Replies View Related

Ubuntu Servers :: Dhcp3-server Fails To Start - Can't Open /etc/dhcp3/dhcpd.conf: Permission Denied

Oct 1, 2010

I installed dhcpd using:

Code:

Now when I try to run it, I get this weird error:

Code:

The error was:

I changed permissions to 777:

Code:

To no avail!

It's got something to do with AppArmor.

I don't think it is installed on this system:

Code:

View 1 Replies View Related

Fedora :: Can't Install Dhcpd On F12 / 13 - Fix It?

Sep 25, 2010

I am trying to install dhcpd on my Fedora 13 VM. I'm using VirtualBox and I installed using the i686 image. I did yum update and everything was fine. When I do yum install dhcpd , I get the following error.

Quote:

Loaded plugins: presto, refresh-packagekit
Setting up Install Process
No package dhcpd available.
Nothing to do

View 5 Replies View Related

Fedora :: How To Add Dhcpd Client

Jun 24, 2010

how to add dhcpd client in fedora

View 5 Replies View Related

Fedora Servers :: Can't Install Dhcpd On F12/13?

Sep 26, 2010

I am trying to install dhcpd on my Fedora 13 VM. I'm using VirtualBox and I installed using the i686 image. I did yum update and everything was fine. When I do yum install dhcpd , I get the following error.

Quote:
Loaded plugins: presto, refresh-packagekit
Setting up Install Process
No package dhcpd available.
Nothing to do

I also tried yum clean to clear cache but that didn't help either. I installed Fedora 12 in a different VM and tried but with no luck. Also tried installing using i386 DVD but same error. I should also mention that what I'm trying to do is that I'm trying to set up a relay agent on my Fedora gateway.

View 3 Replies View Related

Fedora :: DHCPD Service Not Starting On Boot

Jan 19, 2010

I just installed F12 from scratch and I'm facing a curious situation with dhpd. The service is enabled, but It fails to start on boot. I see the following error on /var/log/messages:

Jan 18 17:15:28 neo dhcpd: No subnet declaration for eth1 (no IPv4 addresses).
Jan 18 17:15:28 neo dhcpd: ** Ignoring requests on eth1. If this is not what
Jan 18 17:15:28 neo dhcpd: you want, please write a subnet declaration
Jan 18 17:15:28 neo dhcpd: in your dhcpd.conf file for the network segment
Jan 18 17:15:28 neo dhcpd: to which interface eth1 is attached. **

However service dhcpd start, works just fine when I login, after the system boots:

Jan 18 17:26:49 neo dhcpd: Internet Systems Consortium DHCP Server 4.1.0p1
Jan 18 17:26:49 neo dhcpd: Copyright 2004-2009 Internet Systems Consortium.
Jan 18 17:26:49 neo dhcpd: All rights reserved.
Jan 18 17:26:49 neo dhcpd: For info, please visit [URL]
Jan 18 17:26:49 neo dhcpd: WARNING: Host declarations are global. They are not limited to the scope you declared them in.
Jan 18 17:26:49 neo dhcpd: Not searching LDAP since ldap-server, ldap-port and ldap-base-dn were not specified in the config file
Jan 18 17:26:49 neo dhcpd: Wrote 0 deleted host decls to leases file.
Jan 18 17:26:49 neo dhcpd: Wrote 0 new dynamic host decls to leases file.
Jan 18 17:26:49 neo dhcpd: Wrote 5 leases to leases file.
Jan 18 17:26:49 neo dhcpd: Listening on LPF/eth1/00:30:48:80:2e:7e/192.168.1.0/24
Jan 18 17:26:49 neo dhcpd: Sending on LPF/eth1/00:30:48:80:2e:7e/192.168.1.0/24
Jan 18 17:26:49 neo dhcpd: Sending on Socket/fallback/fallback-net

So it can't be a problem with my dhcpd.conf file.

View 2 Replies View Related

Red Hat / Fedora :: How To Stop DHCPD Service During Boot

Jul 19, 2010

I am a Linux newbie using Oracle Enterprise Linux version 4 update 7 (its almost similar to Redhat Linux). While going through tutorials, I tried to configure the DCHP service and set it to start after every boot via the command

chkconfig dhcpd on

When I boot my Linux,the OS hangs when it tries to start the dhcpd service.Thus,I cannot log into my Linux and shutdown the service. How can I go around this and shutdown the DHCP service to enable my Linux to fully load after a boot?

View 2 Replies View Related

Fedora Servers :: Use Dhcpd To Assign Vpn Clients Their IP And Configuration?

Jan 24, 2009

Is there a way to use dhcpd to assign vpn clients their IP and configuration?

I'd like to have dhcpd listen on br0 (already set as 10.0.0.1) so that devices conecting through eth1 and tap0 (should I be using tun?) will get the same address pool.

View 7 Replies View Related

Fedora Servers :: Dhcpd Option Depending On Manufacturer?

Jan 7, 2010

I would like to send a specific option 15, domain-name, to a few clients on a network from a specific manufacturer. Usually all clients [URL] from the DHCP server, but when a client with mac address bellonging to manufaturer A asks for an IP address I would like to give them [URL] How would I go about doing this? Feels like it should be possible but I am not sure how.. I remember doing something similar in a microsoft DHCP server using vendor-identifier and passing out a vendow-specific option.

Quote:

class "xxx" {
match if substring (hardware, 1, 3) = 00:00:10;
option domain-name "yes.this.works.com";
}
/Carl

View 1 Replies View Related

Fedora Servers :: BIND Dynamic Updates By DHCPD Not Working In 14?

Nov 28, 2010

The problem is that I have set up a test installation with DHCP server and DNS server on Fedora 14 and want to set up dynamic updates from the DHCPD to the NAMED. The problem is that any attempts to make updates of the DNS server fails with a "SERVFAIL" error. I can not even update it through the NSUPDATE tool. This is NAMED.CONF:

Code:
options {
directory "/var/named";

[code]....

View 3 Replies View Related

Fedora Networking :: Way To Allow Only Static Leases In Dhcpd.conf File?

Dec 29, 2010

I have a router with ddwrt on it that runs a DHCP server. What I want to do is only allow people who have pre-determined MAC addresses to get an address to get on my network. That being said I have a VM set up as a DHCP Server. Since doing this I will be setting the dhcp settings on my router to be a forwarder to the VM. Is there a way to allow only static leases in the dhcpd.conf file? I do not just any computer on my network to get an address I want to base it on MAC addresses.

View 4 Replies View Related

Ubuntu :: Auto Start Synergyc In 10.4?

Apr 28, 2010

I know 10.4 is not final but I am running it and loving it. I am trying to have synergyc start and be working at the logon box of ubuntu 10.4. I can get it to autostart after the user is logged in. But I want it to be working before the user is logged in. how I can do this with 10.4

View 9 Replies View Related

Ubuntu :: Auto Run Script At GDM Start

Apr 30, 2011

I'm on Natty, but this was a problem for me on Maverick as well. Since my mouse is way too fast in Ubuntu even on the slowest settings (a topic for another discussion), I run a shell script at startup to fix this. Of course, the script is only run when I log into my account. Is there a way to have this script run at system start so that it affects all users? I already tried copying my fixmouse.sh script to /usr/share/gdm/autostart/ to no avail. If it's germane to the discussion, here are the contents of fixmouse.h:

Code:
#!/bin/sh
xinput --set-prop 10 "Device Accel Constant Deceleration" 2
xinput --set-prop 10 "Device Accel Velocity Scaling" 1

View 1 Replies View Related

Fedora :: Make 13 Box DHCP Server For Network - Cann't Find Dhcpd In YUM

Nov 10, 2010

I would like to make my Fedora 13 box a DHCP server for my network. I can not find dhcpd in YUM. Is there a way to make my Fedora box a dhcp server? This was relay easy with Suse, but my Opensuse box just suffered a hard drive failure.

View 1 Replies View Related

Debian Configuration :: How To Auto-start GUI As Root

Sep 28, 2015

I have a "time-server". It's sending time to different devices through different ports/protocols. The problem is that it has no operator and that makes some extra difficulties.

Now when i try to start it using terminal Code: Select allsudo ./myprogram works fine and

Code: Select all./myprogram doesn't work.

It is so because without sudo i have no access to ports. As a result If i add my program to System->Preferences->Startup Applications it has the same problem. So i need to start it as root, auto-start, right after auto-login to system but without entering password cause nobody will do it.

Also I need to start ntpd but it also asks password sometimes I've tried googles but it offer a few ways with entering password that isn't suitable for me or writing some scripts/changing system files but with no example I'm afraid to break it all. So is there a way to start Myprogram and NTPD as root with no password entering?

My system is Debian 6.0.10 Squeeze, Kernel 2.6.32-5-686

View 12 Replies View Related

OpenSUSE :: How To Auto Start Vmware Service

Jun 16, 2010

every time I reboot the box, I have to run:sudo /etc/init.d/vmware startin order to start the vmware support processes.

There are entries in /etc/init.d/rc5.d
lrwxrwxrwx 1 root root 18 2010-06-08 18:08 K08vmware -> /etc/init.d/vmware
lrwxrwxrwx 1 root root 18 2010-06-08 18:08 S19vmware -> /etc/init.d/vmware

View 9 Replies View Related

General :: Auto Start Several Terminals On Linux

Apr 23, 2011

Every time I reboot my linux machine I have to set up 5 or 6 terminals and Im trying to find a way to do this automatically. Bind a script to a shortcut or on startup that starts several terminals (extra point if theyre tabbed) and have each terminal ssh to different servers.

View 3 Replies View Related

Ubuntu :: How To Restore PulseAudio Auto-start

Mar 30, 2010

I broke PulseAudio accidentally, when I was trying to fix something else. I'm not sure what I did, but PulseAudio no longer starts automatically when I log in. That means I get no sound. I can start the PulseAudio daemon manually by running:

Code:

pulseaudio -D

at the command line, but I also have to go into sound preferences and select the correct hardware (Audigy 2 ZS card) instead of my motherboard's sound device (which is not connected to my speakers) to get sound back. How do I make all that happen automatically?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved