Networking :: ZeroWindow Warnings And Eventually Dies With TCP Window Full Error?
Feb 10, 2011
I'm trying to run an RSYNC job that keeps hanging without any error messages. When I started monitoring traffic with WireShark, I found that RSYNC runs without problems for a few minutes, then starts generating endless TCP ZeroWindow warnings and eventually dies with TCP Window Full error.Has anyone seen this before?PS: I should mention that I don't know much about remote system and I'm not using SSH, just pure RSYNC.
View 2 Replies
ADVERTISEMENT
Mar 8, 2011
Am trying to set up a new system but am getting some strange behavoir. I've administered an Irix system before. I have opensuse 11.3 installed with gnome running. When i enter a bad user id in the windows login screen, the bad authentication causes the x window manager to crash and leaves the system in the ascii terminal mode login. I then have to login as root and do an init 3 , then init 5 to get the x server started again an get the windows login started. Has any one seen this behavior before and how can i fix this. Been hunting through /etc/X11/xdm to see what startup scripts could be causing this.
View 2 Replies
View Related
May 3, 2011
How do I move the Window control buttons when the window is in full screen mode? I.e.: I know how to go into gconf-editor:
Code:
gconf-editor --> apps --> metacity --> general --> button layout = ":minimize,maximize,close"
(I've intentionally disabled the menu...)
What I want is my window controls to be on the right side of the window when the window is in full screen mode.
Also I've had an issue with the Unity dockbar glitching out. I can still click on the buttons (i.e. the logout button) but it displays like a nintendo game inserted crooked. Is there a way to 'restart' unity without log out/ log in?
Any one else experienced any glitches with unity auto hiding/showing?
View 4 Replies
View Related
Jan 15, 2011
I had Ubuntu 10.04 installed entirely on my 750 gig SATA drive. Yesterday I backed up my /home and installed a 200 gig drive and reinstalled using the 200 gig drive as / and swap. The 750 gig drive was all /home. Now, whenever I reboot it comes up saying it had serious errors mounting /home and I have to reboot again to get it to boot up. I never had this issue when the 750 gig drive was running the entire show. Has anyone else run into this? S.M.A.R.T. hasn't been throwing any warnings or errors so I am at a loss as to what "serious" errors Ubuntu could be running into.
View 3 Replies
View Related
Mar 13, 2010
I just installed Ubuntu this morning and don't have much time to detail my problem before my internet goes out again. I am currently running Ubuntu 9.10 (Karmic Koala?). I just got this laptop earlier this week with windows 7 and decided to put ubuntu on it via Wubi. Anyhoo, I login and then enter my wifi password and eveythings fine. I can surf the internet for a bit and everythings fine. but after a while, the wireless indicator on the keyboard begins to flicker on and off (between a connection and no connection) then starts to stall. The first thing I did was install google chrome (always the first thing to do) and I accidentally downloaded the wrong version A-OK. After I saw I downloaded the wrong version, I downloaded the correct, 32-bit version and installed it. During the download it said I had a 750kBs speed, but took much longer to download than had it been downloaded at a consistent 750kBs speed. I then tried to use update synaptic and it began to download reload all 44 packages and stalled around 38 or so. My internet then disconnected (wouldn't reconnect) and the download failed. I went back into windows uninstalled Ubuntu and then reinstalled it. After going through the first few steps again I began to update via update manager and surfed the web. After a few minutes of surfing the indicator began to flicker than just went off. I then connected to my neighbors internet, continued surfing and then the internet just crashed. I've found that when its just lightweight surfing, everythings okay, but during a download or any 2.0 surfing, then things start to get funky.
View 4 Replies
View Related
Aug 27, 2011
I have two computers and a wi-fi router. A notebook with Ubuntu 10.04 and a desktop with Windows 7. Whenever the notebook is on, the desktop starts having horrible Internet speed, and eventually disconnects. If I turn the notebook off (or disconnect from the network) it starts working fine again. Both computers connect to the router via wi-fi. I should also note that the connection runs flawlessly on Ubuntu.
View 3 Replies
View Related
Sep 11, 2010
Samba doesn't seem to disconnect on shutdown except by timing out, causing a loooong Lucid shutdown. (I can disconnect manually before shutdown by unmounting the Samba shares, and shutdown is then very fast.) Apparently Network Manager is somehow involved. I've installed a NM shutdown Samba script which works for the first user account, but not for the second user account (which was created and then put into the admin group).
View 4 Replies
View Related
Aug 28, 2010
I'm running wicd 1.7.0 on Kubuntu 10.04, with an Actiontec DSL wireless router (with an internal dd-wrt "bridged" router as well;Any idea what "magic" those lines are performing and if it's possible to make wicd do it all the time (instead of just the third time)?Very happy to pursue any debugging if anyone has any ideas, as it's pretty annoying to have to wait an extra couple minutes on every boot until connecting.
View 1 Replies
View Related
Apr 9, 2010
When trying to install RHEL 5.4 on a Flagstone SATA (encrypted hard disk), linux timeouts while loading the ata_piix module.
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.00: cmd 81/00:08:00:00:00/00:00:00:00:00/e0 tag 0 data 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2: soft resetting port
ata2.00: configured for UDMA/33
ata2: EH complete
The above message is repeated several times until the kernel eventually "panics".If I use a non-encrypted SATA (Maxtor, Fujitsu, etc), the install works. It only fails with Flagstone SATA encrypted hard disks.
View 2 Replies
View Related
Jun 21, 2011
tmux shows screen like this:
[code]...
Window has non-maximum width, attempt to copy text from it leads to "" getting in text. How to fix it and get the tmux window full width?
View 2 Replies
View Related
Oct 1, 2010
see this even the window is maximisez its not fully wide the window was fine before and after compiz installation .but after installing some other apps this happend , how to fix it ?
View 1 Replies
View Related
Sep 24, 2010
I don't want to 'spam', (I had started a first thread about this some time ago), but I'm (still) experiencing problems with my internet: I can use the internet (I am connected through a simple switch) for some time, that is: surf the internet (in firefox) and download using vuze (azureus) but after some time, the internet connection 'dies' (downloadspeeds jump to 0b/s and I am not able to surf to any site in firefox). When that happens, the only 'solution' to this is restarting my pc.
I first experienced this when using ubuntu 10.04, so I thought that it was a 10.04 issue. I knew that when I had ubuntu 9.10 (karmic koala) installed, this didn't happen. So today, I installed karmic koala, but much to my surprise I am experiencing the same problem. I used 'lspci' to find out what NIC is in my pc and I found out I have the following NIC: 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78 ) I'm suspecting the NIC to be the problem. Is this probable? If so, I want to buy a add-in network card (simple one, not a gigabit card)
View 6 Replies
View Related
Jan 15, 2010
We have a NAS application which can be accessed by both HTTP and HTTPS connections.
The issue we are facing is that the tcp server instance that initiates the HTTP access dies after a few hours of inactivity(the NAS application was kept idle for around 10 hours). However, the tcpserver that launches HTTPS connections remained running.So the connection failed through HTTP access but the connection succeeded through HTTPS access.
The converse has also been observed where the tcpserver for HTTPS is dead but tcpserver for HTTP is running.
The version of tcpserver that we are using here is ucspi-tcp-0.88.tar.gz.
I have the following queries:
a)Has anyone faced the same problem before?
b)Is it an issue with this package version of tcpserver ?
c)Will upgrading to newer versions of tcpserver bail me out of the issue?
d)Also, could anyone let me know what are the possible causes for the tcpserver to die ?
View 3 Replies
View Related
Apr 15, 2010
I recently installed the vt6656 wireless pci card that came with my zotac motherboard. I can associate with my ap and get an ip address successfully. When I disconnect my ethernet cable, however, my wireless interface stops responding (can't ping it). The box itself is in a place where I don't have a monitor connected to it so I cant see anything since my ssh session gets killed as soon as I disconnect the ethernet cable.
What would be the reason why the ehternet cable being unplugged, disconnects my wifi card as well? Does something get triggered? I did some testing with iptables, blocking the 8080 traffic to the wired interface, and noticed that the 8080 traffic also gets blocked to the wifi ip. I'm afraid that this never worked properly to begin with.
View 1 Replies
View Related
Apr 18, 2016
I am new to debian. While I am playing a video in vlc or in any other player its playing well in small sized window, but if i am making it full screen the video is getting blur...blinking..getting slow..but sound is okay.
View 1 Replies
View Related
Feb 11, 2010
I just rebuilt my fedora box and I'm having some problems getting dual monitors to work. First, I can't reposition my secondary monitor to be on the left. It thinks it's on the right. I can use xrandr to fix this, but that is annoying. Is there no way to do this in the display properties? Second, maximizing a window makes it go across all screens. I unchecked this option in the display properties.I also unchecked the one for letting windows be in multiple monitors at once, but this still happens.
View 4 Replies
View Related
Jan 31, 2011
I just installed Ubuntu Netbook 10.10 on my new Asus Eee PC 1215T, and I'm having trouble getting Internet access. When I first start up or reboot the PC, I'll have network access, but not Internet access. I'm connecting via a WAN at my university, and so the first thing you have to do is "register" the computer on the network (by visiting a certain website on their intranet) before it will allow you to access the Internet. Takes about 3 minutes to register it. I have enough time to *begin* this registration process, but I've tried several times and I can't get all the way through it before I mysteriously lose all network access. Unfortunately this is a brand new machine and came without any OS installed, so there's no way I know of to test whether this is defective hardware or not.
View 1 Replies
View Related
Feb 18, 2011
This sux cause im new to ubuntu and it was working great on my laptop but after a recent update the wireless (wifi) connection just dies after 1 minute. The connection is still active, the icon shows full signal, nothing seems wrong at all, but there is no internet communication at all.
If I disconnect and reconnect I get proper internet comms for another minute, then it goes dead again!
This all started after a recent series of updates.
Computer:
Toshiba Satellite L505D-S5965
AMD Athlon X@ Dual Core QL-65
ATI RADEON 3100
Realtek RTL8187SE Wireless 802.11b/g 54Mbps PCIE Network Adapter
Realtek audio
Software:
Dual boot Vista (original factory installation) ubuntu added 2nd
All the latest kernals and non-beta releases as of 02/18/2011
I was almost ready to go all ubuntu, but I had to log back into vista to get internet to try and find help. ubuntu has been like this for weeks, but i havent had the time to try and find out what screwed the pooch on my wireless....
View 2 Replies
View Related
Apr 30, 2011
Xfwm4 has a very nice option when right-clicking on the window decoration to choose a full screen mode... but how do I come back to the normal window size?
View 1 Replies
View Related
May 11, 2010
I've been Googling all day and cannot find the answer. I find all the "GUI" ways to do it through Gnome and KDE but I'm not using either...I have an EEE PC set to boot up automatically to openbox and want Firefox to start after that in a full screen openbox window.I've tried adding the firefox command to ~/.initrc but it won't execute. I tried the command in .profile. This brings up firefox on a black screen without openbox.Firefox comes up fine when executed from the openbox menu.
View 3 Replies
View Related
Apr 28, 2010
I posted this on Launchpad under bug# 569445 and though I'm certain someone in our heroic development community will have a look at it eventually, maybe someone can help me here in the meantime, or at least provide some background info. Maybe a little reassurance that Ubuntu isn't broken for my Wifi is all I need.
Quote:
Binary package hint: wireless-crda I do hope I've picked the right package for this. Investigators, feel free to email me with whatever bash commands you need me to find out more about the hardware. The problem is that wireless in Lucid is dying for me after about a minute or so, and the activity light on my netbook just flashes. The wireless monitor at the top of the screen still thinks it's connected. It's like it's out of sync or something.
This doesn't happen under Win7 on this hardware, nor does it happen to other devices in my house on the network. Also, I wasn't having this problem under Lucid Beta 1 I have an Acer Aspire (Olympic Variant) 1410 Win7 reports the adapter as Intel WiFi Link 1000 BGN The wireless router I'm using is a DLink DIR-628. The connection is OPEN.
View 1 Replies
View Related
Mar 1, 2011
I have problem with internet connection on my Ubuntu, but the major problem is that i can't copy the message from my terminal while I type:ifgonfig and paste it here to show you what is the problem.
View 9 Replies
View Related
Mar 2, 2011
I installed Ubuntu Server 10.04 on a dell inspiron, twice just to make sure I didn't mess something up. Apache and SSH work fine post boot. Eventually, just inexplicably, it stops working. SSH is refused and Apache doesn't seem to be running, or it is and it's blocked. What really gets me is that I installed ssh on many many other machines on the same network, even the same ip range and they work fine. They never eventually refuse access for no reason. I checked the startup on the machine and ssh / apache do start at boot... so I'm not crazy there. It does have a static IP but so do many other machines... so I can't believe it's the router / firewall. Especially when I can connect at some point, then it just decides to stop
View 2 Replies
View Related
Jun 18, 2010
I installed Lenny for my new server and set a static IP the usual way:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
[code]....
View 5 Replies
View Related
Apr 17, 2010
Will there be eventually iphone support for example with banshee?There is no linux iTunes.
View 4 Replies
View Related
Feb 28, 2011
If I install beta 12 via PPA, will it eventually update to RC, then final automatically? Is it better to download Firefox 4 from the website and install it that way? I use both Maverick and Lucid on my machines.
View 7 Replies
View Related
Jul 6, 2011
Normally when I don't do anything in minutes, screen eventually fades to black. But sometimes, maybe 1/10 screen goes to gray. I can do nothing to recover from this. I can see mousepointer and it moves, but thats it. I have to manually switch power off. What is this, is this known issue? Otherwise everything works fine. I have Asus m2n68-am
View 3 Replies
View Related
Dec 11, 2009
I am looking for a program just to film and eventually save (this is not very important) from my webcam.
View 3 Replies
View Related
Aug 1, 2010
I have a bluetooth-enabled notebook and I used to eventually turn on/off the wireless switch, which disabled wi-fi and bluetooth capabilities.Recently I turned on the switch to find the bluetooth icon missing from the Notifications area at the panel. When I type bluetooth-properties at the terminal a windows pops up saying "Your computer does not have any Bluetooth adapters plugged in." No further hardware/software changes were made recently.
View 1 Replies
View Related
Apr 9, 2010
In fact I'm not the systems administrator, but I have a strange problem unzipping a file. I think is a problem of memory or swap space or somethin similar, but I'm going explain the problem in detail: Distribution: Red Hat Enterprise Linux ES release 4 (Nahant Update 3) I'm connected as root. I have this zipped file: -rw-r--r-- 1 root root 678183271 abr 7 15:30 Master032010.zip it contains a 2,4G file
[Code]...
View 14 Replies
View Related
