In fact I'm not the systems administrator, but I have a strange problem unzipping a file. I think is a problem of memory or swap space or somethin similar, but I'm going explain the problem in detail: Distribution: Red Hat Enterprise Linux ES release 4 (Nahant Update 3) I'm connected as root. I have this zipped file: -rw-r--r-- 1 root root 678183271 abr 7 15:30 Master032010.zip it contains a 2,4G file
[Code]...
i finally decided to updgrade from Hardy Heron to Lucid Lynx. for this i made a backup of my old install, then i couldnt find my Lucid CD so i used a Karmic one to partition my old ext3 to ext4. There were some errors but after trying a few times it worked. Installed Karmic, rebooted (worked fine), downloaded all updates - (did NOT reboot to let updates take effect) and upgraded to Lucid.
Everything went fine so far. Now when i try to boot into Lucid the system hangs, i've also got a windowsXP partition on there so i tried booting that, first grub tells me Error 29: Disk write error then trying again windows seems to boot but it takes much longer than it should and seems to hang.
Then i tried Karmic and Lucid LiveCD (which i found in the meantime) none of the LiveCDs make it to boot after about 20 minutes. (previously they worked fine)looking at the errors it seems to be something about the harddrive. Why the harddrive would stop the LiveCD booting is a mystery to me but the same messages appear when i select Recovery from the Grub menu so i guess the problem is related.
[Code]...
I run apt-get upgrade and get
Quote:
Preconfiguring packages ...
(Reading database ... 78720 files and directories currently installed.)
Preparing to replace apt 0.7.25.3ubuntu9 (using .../apt_0.7.25.3ubuntu9.1_i386.deb) ...
Unpacking replacement apt ...
dpkg: error processing /var/cache/apt/archives/apt_0.7.25.3ubuntu9.1_i386.deb (--unpack):
unable to create `/usr/share/locale/dz/LC_MESSAGES/apt.mo.dpkg-new' (while processing `./usr/share/locale/dz/LC_MESSAGES/apt.mo'): No space left on device
No apport report written because the error message indicates a disk full error
[Code]....
df -h [URL] I did the following command to find everything is in /usr or /var, then tracked it down to /usr/lib and /usr/share as the main offenders, but out of all the directories none are more than 1mb or so.
du -sh /* | sort -gr | head -n 5
I tried to uninstall firefox, which is what got me in this mess in the first place, the log claims it will remove ~240 mb but failes on a "E: Write error - write (28 No space left on device)" [URL] If I could juggle something onto an external hard drive so I can uninstall firefox I would be out of the wood. Failing that I believe a new install is in order.
I have to unzip only files in zipped folder in current directory by c program. For that I am using system() function. This function returns zero.
when I write system("unzip -jo /storage/conf.zip") but folder will not be unzipped. Same will be successful if tried on command line.
Here is the error I get from unzipiping a "file" that is approximately 20GB
Quote:
I am facing an issue, while unzipping an UNIX ZIpped file. The message I am getting is as below.
/> unzip np_ARUDDP99_20110201.zip
Archive: np_ARUDDP99_20110201.zip
End-of-central-directory signature not found. Either this file is not a zipfile, or it constitutes one disk of a multi-part archive. In the latter case the central directory and zipfile comment will be found on the last disk(s) of this archive. unzip: cannot find zipfile directory in one of np_ARUDDP99_20110201.zip or np_ARUDDP99_20110201.zip.zip, and cannot find np_ARUDDP99_20110201.zip.ZIP, period.
I'm running mythbuntu 9.04 and am having an issue with disk space.
I try 'rm' various log files but the space I free up lasts less than a minute before the disk reports as being full once more.
df -Th | sort gives:
Quote:
/dev/sda1 ext3 8.3G 7.9G 0 100% /
/dev/sda6 ext3 138G 125G 6.3G 96% /music
/dev/sda7 xfs 783G 617G 167G 79% /videos
/dev/sdb2 xfs 344G 242G 103G 71% /recordings
[Code]....
There's nothing enormous in /var/log and my trash and the root trash are empty.
why size and used fields are not the same despite 100% usage being reported on sda1..
I have a netbook I'm not using and which I transformed into a server with Apache, Tomcat6, Netatalk, Webmin, BIND9 and Tor.
Problem is, the disks never stop spinning because all of the programs write a few kb at least every few seconds to disk, even when nobody is connected to it.
My question is: Is there a way to have the computer boot from disk like normal (maybe even a squashfs), keep ALL CHANGES to ram and then save to disk when either the ram is full (unlikely because the server is rebooted every few days) or at shutdown?
I thought about a mixture of ramfs and unionfs but I'm not good enough yet...
I have 4 machines; all multiboot. I want each machine to have full rw access to file shares on each other machine, AND, full rw access to the other partitions on the same machine home folder for UNbooted OS's. I imagine Samba will NOT handle all these configurations? What else do I have to do, so that, for example, if I have 2 machines on, and I boot up a third machine in another room, it will auto mount the other 2 machines' shares, and it export it's own shares to the other 2 machines? I want also each machine to have full rw access to shares on the UNbooted partitions of each machine.
View 1 Replies View RelatedDoes anyone know or have a book on the advanced uses of kickstart and its deployment methods? I have a challenge and its to: Write a report with a full and detailed analysis of the two methods,(remote installation methods of linux and windows) their differences, and a comparison of features and performance.
I am also going to have two servers (one Windows one Linux)thay deploy a virtual network of VMs with different scopes and policies. What can i really do to go beyond the scopes and policies?
i'm having issues in trying to copy files from one hard drive to another. The destination disk is not full yet I get the message "Error creating directory: No space left on device".
View 4 Replies View RelatedI'm on 10.04. Cloning a vdi yesterday, I managed to produce a 'disk is almost full' message. Deleted some movies and wanted to try the cloning again today, but starting my laptop, I get an ugly gray login screen.When I login, it looks almost good (some console writing to fast to read) but then it falls back to login informing me 'Install Problem: The configuration defaults for GNOME Power Manager have not been installed correctly."
View 1 Replies View RelatedSo i just installed ubuntu server 8.04. Got everything set up and started putting my files on it. 6 Hours of copying later I get a message saying that my Disk is full. This is a 1.5TB HD and it stopped copying at 269GB. fdisk shows the drive as 1.5TB, and ls -sh shows that only 269GB have been used. Yet I cannot add any more files. The other weird thing is that df doesn't show the hard drive, yet I know it is mounted and accessible. If it makes a difference I have it formatted to ext3.
View 2 Replies View RelatedI can't seem to fin the command that tells how much space is used/free.
View 5 Replies View Relatedhere is the problem I am facing. My system [ fedora 11 with all updates installed as of nov 27] suffered a power interuption.[ well that happens I dont have an UPS] here is what happen then
1- when i restarted i get stuck with the "install problem with gnome power manager" that prevent the desktop to launch. I found this to be well documented and I ssh'd [ for some reason cannot get the consol] my system and tried as root to remove gnome-power manager with yum remove power manager ... well the command hang out doing nothing and I have to close the session and reconnect... CTRL C dont even work.
So I had another problem. I started checking my system and when I tried df, I received the shocking following answer
[Code]....
I have a little/big problem. This morning, I dont know why, but suddently my hard disk was full. I thougt that the temporary space grew too mucho and I thought if I restart my machine, everything would be nice but no. Now in the logging screen comes messages that some components cant be load and so I can't go in my Fedora
I tried to access to my partition with Knoppix-livecd and free some space, but it seems that Knoppix can't access to that partition. I have installed fedora 12.
Could anyone recommend a method of creating a full disk image. I have the Acronis bootable media, would this work to backup Linux partitions? I'm thinking that Acronis doesn't know or care what is written to the disk as it works at a lower level.
View 7 Replies View RelatedThe only reason why I don't use Linux (even though I prefer Linux over Windows, and can do everything faster and more efficiently) is because each time I try to learn about dm-crypt I give up.
Can someone point me in the right direction for full OTFE on Linux (like TrueCrypt)?
I am trying to upgrade to 9.10 but it fails because the disk is full. I am running a Dell Mini with 16GB SSD...so there isn't a lot of free space to begin with. Added to that, I have some hefty applications (rosegarden, audacity, skype, etc) which I kind of need. Am I better off just sticking to 9.04? Are there any good ways to clean up the system and get rid of stuff that might be sticking around? I did apt-get clean and it didn't clean enough.
View 6 Replies View RelatedI am using default USB Startup disk creator for spreading new versions of ubuntu on all my machines. In 10.04, I point it to GnomeLiveCD of 600Mb, and usual 4Gb flash drive. And the application says I have not enough space.4Gb is empty, fresh formatted, with right partiion. It is OK in short. Do somebody know what to do with app?
View 3 Replies View RelatedThe disk on this machine was full (0 bytes available). I rebooted and now it just goes to a blank screen. I thought I might need to free up some space for something, so I booted to a live cd and freed up some space. Still boots to a blank black screen.
View 4 Replies View RelatedI am having trouble with my HDD.
Here is how Disk Usage Analyzer looks like:
But I can not find any files there to delete.
Trash is also clean.
Code:
server:/home/mal # cd /backup/
server:/backup # du -hc *
17G export
4.0K lost+found
20M rman
8.0K sqlnet.log
4.0K test.sh
[Code]...
I do know about cold boot attacks. But I ran across a couple of posts/websites that had me wonder if it is possible, without the passphrase, to just remove the encryption?
View 4 Replies View RelatedI would like to configure my Debian Jessie system in this way.
Two partitions:
1) /boot on /dev/sda1
2) everything else on /dev/sda2
I want to encrypt the second partition with LUKS. And then install over it a LVM volume. Inside the LVM volume i will create the / (root), /var, /opt and /home virtual partitions. In this way, i'll get asked only once for the password to decrypt all partitions. Because if i don't use LVM, then i'll get asked for the password for each encrypted partition.
I can follow and understand almost everything of this HOW-TO for Archlinux: [URL] ....
Only two passages are unclear to me:
1) Configuring mkinitcpio
I don't understand what i should do here in order to complete this. What should i do in Debian to configure "mkinitcpio"? what is the equivalent thing to do here?
I thought that the kernel would automatically recompile itself with all installed modules on the Debian system, once cryptosetup/LUKS or LVM2 get installed.
2) Configuring the boot loader
I don't understand what should i write in /etc/default/grub. Will GRUB automatically load the LUKS and LVM2 modules? Also, I don't think that i could boot the system in this way:
cryptdevice=/dev/sda2:LVM root=/dev/mapper/LVM-????
Actually the "root=" volume is the whole volume to mount as LVM. It isn't the final root partition.
With all the talk about disk encryption for Apple devices, I wanted to ask about how full disk encryption compares between debian linux and mac OS X. Is the code for debian linux fully available for people to inspect for flaws or backdoors? Apparently although part of the encryption code is available for OS X the full code for Filevault 2 is not public. What are the advantages and disadvantages of each method of encryption for each operating system?
View 8 Replies View RelatedWhenever I launc YaST software manager it keeps telling me my disk is full.
It's quite right, it's just that the disk in question is a mounted openSUSE CD iso which is 100% full - as it should be.
Is there any way of stopping YaST doing this - I'd like to be able to tell YaST which fs to ignore but a even a full stop would be better than a warning every time.
I downloaded the Lubuntu iso from http://lubuntu.net. It is 521MB.How much disk space would a full install use? 2GB? 3GB?
View 3 Replies View RelatedFor some reason I can't find any documentation re: the algorithm(s) used by Ubuntu to encrypt the filesystem... Anyone know what it is?? AES?
View 2 Replies View Related