Ubuntu Servers :: FTP And Apache Eventually Refused?
Mar 2, 2011
I installed Ubuntu Server 10.04 on a dell inspiron, twice just to make sure I didn't mess something up. Apache and SSH work fine post boot. Eventually, just inexplicably, it stops working. SSH is refused and Apache doesn't seem to be running, or it is and it's blocked. What really gets me is that I installed ssh on many many other machines on the same network, even the same ip range and they work fine. They never eventually refuse access for no reason. I checked the startup on the machine and ssh / apache do start at boot... so I'm not crazy there. It does have a static IP but so do many other machines... so I can't believe it's the router / firewall. Especially when I can connect at some point, then it just decides to stop
View 2 Replies
ADVERTISEMENT
May 29, 2011
Connecting remotely through FileZilla works ok, but I can't connect from localhost (FWIW I'm running WordPress and would like to be able to upload plugins from the dashboard).
I've got vsFPTPd installed and - I think - running:
Code:
# service vsftpd start
vsftpd start/running, process 25782
All ok so far... however I can't see it on any of my ports:
Code:
# nmap localhost
Not shown: 995 closed ports
PORT STATE SERVICE
22/tcp open ssh
[code]....
And of course if I
Code:
telnet localhost:21
That's 'Connection refused...'
Nothing in 'netstat --listen' either.
The odd thing is, I can connect fine using FileZilla.
To confirm, I have
Code:
local_enable=YES
set in my vsftpd.conf.
View 6 Replies
View Related
Feb 14, 2011
I have a new Ubuntu server (10.10), named Denholm, recently installed and updated. I came in this morning, attempted to add a package with apt-get, and got a "Connection refused" response. I have another server (also 10.10), named Moss, on the same network that can connect successfully.
Here's what I've found/tried so far:
This doesn't look like and apt problem anyway, but the sources.list files on Denholm and Moss are identical.
I can ping [URL] (and other sites) successfully from Denholm.
I have tried 'wget www.google.com'. From Moss the wget is successful, but from Denholm I get "Connection refused."
I have a web server on Moss and Denholm can successfully access it.
To the best of my knowledge, Denholm is not configured to use a proxy server (no http_proxy variable set).
View 1 Replies
View Related
Apr 9, 2011
I am new to ubuntu and I'm trying to set up an vps, but I cant manage to get past the first screen where I have to fill ip and port 22. When I click open, it says connection refused.
View 4 Replies
View Related
Feb 4, 2010
I was just checking some of the generated logs from Samba.
Code:
Quote:
I've looked over my smb.conf and it doesn't look like I even have any printer sharing enabled.
Quote:
How PC1 was refused a connection when it looks like I don't have any printers being shared throught Samba?
This is just on a home LAN.
View 1 Replies
View Related
Jun 17, 2010
I have sendmail running (quite well) on my ubuntu box. It worksfine with Thunderbird locally. It runs fine with a few other MUAson (allowed) remote machines. It has one small problem I have notbeen able to clear up: it will not send mail that is initiated bythe 'mail' program locally. It gives me a "[127.0.0.1 connectionrefused] error in the logs. The /etc/hosts file is fine (as faras I know). The sendmail.cf file has been rebuilt from sendmeil.mc.'hostname' and 'dnsdomainname' return proper values. Okay, I'mstumped and looking for another set of eyes on the problem.
View 2 Replies
View Related
Mar 13, 2011
I have a Rackspace server running Ubuntu Lucid Lynx, where I have installed an IRCd-Hybrid. I can connect to the IRC server using irssi that was installed on the same machine where the server is, but when I try to access it from my computer at home or my friends try I get this error:
Code:
Connection Refused
What should I do?
View 1 Replies
View Related
Jan 3, 2010
I downloaded the ubuntu server (command line only) iso and set up a server on a spare computer. The only partition is ubuntu. LAMP server installed, and runs. Its plugged into my home network and the router assigns it a DMZ. I use ptty and that allows me to connect the server from my Windows PC. I installed samba and that works, I set up the server as Z: to my windows PC, and I can now use Filezilla FTP to move gigs of files over from my windows PC to the ubuntu server. I have to log in to activate the connection to Z: but it works.
Problem is getting a database connection from my windows PC (client) to my ubuntu server. Server is running a MySQL server and an Apache Derby server but both give connection:refused every time I try to connect with a java app, or with ij from my client. I tried MySQL Workbench, as that has a GUI, that doesnt connect to MySQL either. Every time I start my server I have to add lots of jar files to the CLASSPATH just to get the Derby server running. The Derby client connection on my client PC is also properly set up with PATH and CLASSPATH etc etc all configured and tested. But the server refuses every attempt to connect even though it tells you the Derby server is up and runnign as listening on port 1527!!!
What I want is a script or app that will "unlock" my server so I can actually do something with it instead of constantly trying new settings and packages in the vain hope it will then actually 'serve'. I am missing something here. There is nothing of value on this server that cannot be 'exposed' to the internet, so I'd be happy to turn off all the security just so the damn thing allowed connections...!
View 2 Replies
View Related
Aug 8, 2010
I'm testing my mail server, and sending email works fine. However, when I tried to send emails to my server from gmail, I get this log:
Code:
Aug 8 14:18:17 anbient postfix/smtpd[14228]: warning: database /etc/postfix/virtual.db is older than source file /etc/postfix/virtual
Aug 8 14:18:17 anbient postfix/smtpd[14228]: connect from mail-qy0-f169.google.com[209.85.216.169]
Aug 8 14:18:17 anbient postfix/smtpd[14228]: F3D4B1DD02C0: client=mail-qy0-f169.google.com[209.85.216.169]
Aug 8 14:18:18 anbient postfix/cleanup[9988]: F3D4B1DD02C0: message-id=<4C5EBC96.2030800@gmail.com>
Aug 8 14:18:18 anbient postfix/qmgr[9993]: F3D4B1DD02C0: from=<felipefidelix@gmail.com>, size=1982, nrcpt=1 (queue active)
Aug 8 14:18:18 anbient postfix/smtp[9995]: connect to net[174.132.240.146]:25: Connection refused
Aug 8 14:18:18 anbient postfix/smtp[9995]: F3D4B1DD02C0: to=<fidelix@net>, orig_to=<eu@felipefidelix.com>, relay=none, delay=0.15, delays=0.09/0/0.05/0, dsn=4.4.1, status=deferred (connect to net[174.132.240.146]:25: Connection refused)
And this is strange. 174.132.240.146 seems to be the web address 'net.net'. I am sure this has to be some setting in postfix, cuz its trying to deliver the email to 'fidelix@net', and that cant be right.
Here is my postconf -n output:
Code:
root@anbient:/var/mail# postconf -n
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
append_dot_mydomain = no
biff = no
broken_sasl_auth_clients = yes
config_directory = /etc/postfix
home_mailbox = Maildir/ .....
View 9 Replies
View Related
Feb 18, 2011
I am experiencing a bit of a problem with openssh-server. I installed the server like I normally do. It wouldn't work, so I tried using this. It still didn't work. Later, I have realised that when using service sshd start SSH says it started, but when you check if it's running with service sshd status it says it doesn'triend advised me to use /etc/init.d/sshd and I managed to get it started. However, that doesn't return anything, and when I try to connect it says connection refused even when I try to connect from localhost to localhost
View 13 Replies
View Related
Dec 20, 2009
I have FileZilla installed on this machine, and OpenSSH (with an open port 22) on another machine on my home network. When I try and connect, I get: Quote: Status:Connecting to 192.168.2.3... Response:fzSftp started Command: open "alphatwo@192.168.2.3" 22 Error:Connection refused Error:Could not connect to server
Which has left me puzzled as I have an open port. Does the username have to be defined somewhere? E.g. the machine acting as my SFTP server can be logged on to locally as alphatwo so that's what I logged in as (with the correct password). Is this correct? If so, does anyone have any ideas as to how I might rectify it? I want SFTP set up so I can copy PHP files from my laptop to /var/www/html/ on another PC (across the home network).
View 4 Replies
View Related
May 3, 2010
I have Webmin installed on an Ubuntu server. I currently have a successful apache server running on port 80, however I want to create a virtual host on port 81. When I try I go to servers->Apache Webserver-> Create Virtual Host I change the port to 81 and the document root to /var/port81www then I click create. How ever when I goto 192.168.1.5:81 (local ip, I know I have to port forward but its not even working local) it does not work.
View 5 Replies
View Related
Jan 7, 2011
I am merely trying to change the port for my ssh server.However it isn't changing.I edited my ssh_config file to:
Code:
# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for[code]...
When i try to connect to my server via port 443 i get a connection refused error. However when i try to connect via port 22 it connects. Since that didn't work, i tried restarting the entire server.To restate, i changed the config file and restarted ssh then the computer, however the port didn't change.Ohh and yes my router is set to port forwarding on port 443, though it doesn't matter since I'm inside the network.
View 2 Replies
View Related
Sep 11, 2010
I've often visited this site and I have used Ubuntu as "client" for long. Last week I dicded to install Ubuntu Server 10.4.1 on a brand new Dell PowerEdge R310. (In the past I installed several Servers based on Debian). Installation worked fine and quick. Base installation is done without any additional software (which where offered during first installation). IP is set static - no DHCP.
For documentation reasons I want to install more software remote (putty from a windows machine). First I did a "sudo apt-get install ssh openssh-server". This installation went ok and ssh server is runing: login from "localhost" works. But login from any other machine results in "connection refused". Checking port 22 with nmap says "port closed". (ping works) My search on this issue yields that "ufw" is a part of Ubuntu Server. After checking this "ufw" is diasbled. But why always the connection is refued? Two days I did testings and trials but got no resolution.
View 9 Replies
View Related
Mar 13, 2010
I just installed Ubuntu this morning and don't have much time to detail my problem before my internet goes out again. I am currently running Ubuntu 9.10 (Karmic Koala?). I just got this laptop earlier this week with windows 7 and decided to put ubuntu on it via Wubi. Anyhoo, I login and then enter my wifi password and eveythings fine. I can surf the internet for a bit and everythings fine. but after a while, the wireless indicator on the keyboard begins to flicker on and off (between a connection and no connection) then starts to stall. The first thing I did was install google chrome (always the first thing to do) and I accidentally downloaded the wrong version A-OK. After I saw I downloaded the wrong version, I downloaded the correct, 32-bit version and installed it. During the download it said I had a 750kBs speed, but took much longer to download than had it been downloaded at a consistent 750kBs speed. I then tried to use update synaptic and it began to download reload all 44 packages and stalled around 38 or so. My internet then disconnected (wouldn't reconnect) and the download failed. I went back into windows uninstalled Ubuntu and then reinstalled it. After going through the first few steps again I began to update via update manager and surfed the web. After a few minutes of surfing the indicator began to flicker than just went off. I then connected to my neighbors internet, continued surfing and then the internet just crashed. I've found that when its just lightweight surfing, everythings okay, but during a download or any 2.0 surfing, then things start to get funky.
View 4 Replies
View Related
Feb 28, 2011
If I install beta 12 via PPA, will it eventually update to RC, then final automatically? Is it better to download Firefox 4 from the website and install it that way? I use both Maverick and Lucid on my machines.
View 7 Replies
View Related
Jul 6, 2011
Normally when I don't do anything in minutes, screen eventually fades to black. But sometimes, maybe 1/10 screen goes to gray. I can do nothing to recover from this. I can see mousepointer and it moves, but thats it. I have to manually switch power off. What is this, is this known issue? Otherwise everything works fine. I have Asus m2n68-am
View 3 Replies
View Related
Aug 27, 2011
I have two computers and a wi-fi router. A notebook with Ubuntu 10.04 and a desktop with Windows 7. Whenever the notebook is on, the desktop starts having horrible Internet speed, and eventually disconnects. If I turn the notebook off (or disconnect from the network) it starts working fine again. Both computers connect to the router via wi-fi. I should also note that the connection runs flawlessly on Ubuntu.
View 3 Replies
View Related
Aug 1, 2010
I have a bluetooth-enabled notebook and I used to eventually turn on/off the wireless switch, which disabled wi-fi and bluetooth capabilities.Recently I turned on the switch to find the bluetooth icon missing from the Notifications area at the panel. When I type bluetooth-properties at the terminal a windows pops up saying "Your computer does not have any Bluetooth adapters plugged in." No further hardware/software changes were made recently.
View 1 Replies
View Related
Sep 11, 2010
Samba doesn't seem to disconnect on shutdown except by timing out, causing a loooong Lucid shutdown. (I can disconnect manually before shutdown by unmounting the Samba shares, and shutdown is then very fast.) Apparently Network Manager is somehow involved. I've installed a NM shutdown Samba script which works for the first user account, but not for the second user account (which was created and then put into the admin group).
View 4 Replies
View Related
Jun 18, 2010
I installed Lenny for my new server and set a static IP the usual way:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
[code]....
View 5 Replies
View Related
Apr 17, 2010
Will there be eventually iphone support for example with banshee?There is no linux iTunes.
View 4 Replies
View Related
Jul 28, 2011
The screen of my years-old HP laptop (running Natty) freezes and eventually turns black. Ctrl-Alt-F# works to switch to the terminals. My fan is even louder than usual. I spend some time fooling around with ps and kill and shut down some of the most resource-consuming processes, which quiets the fan a bit, but tty7 still shows a black screen except for my mouse pointer.
I finally decide to shut it down altogether, but then I think to myself, "Self, you've used the power switch to shut down before in this situation, but shouldn't there be a more proper way to do it in the terminal?" So I try shutdown, I have trouble with it, it proceeds to get hopelessly tangled up, and it looks like it's frozen up in mid-restart when I throw up my hands and decide to go for the old power-switch-for-five-seconds method after all. Now when I start the computer and select Ubuntu from GRUB, I get this:
[Code].....
View 9 Replies
View Related
Apr 18, 2010
New to Linux and am wanting to install ubuntu 9.10 or 10.04 on a single separate 80gb drive. I have Windows installed on 2 80gb drives in Raid0 (nvidia controller) .I have installed 9.10 but Win7 will not load from the bootloader : gives me the error invalid signature. I've looked around and tried a few things to get it to load with no success.. is the Raid0 the issue?
If I try to install 10.04 it will hang and eventually errors out, I believe on the raid drive because it comes up with dev/mapper/nvidia_hhfbdccf1..
View 1 Replies
View Related
Apr 23, 2010
I've run into a problem and I don't know if it's apache or php or the combination of both. I can compile apache 2.2.15 just fine, but whenever I try to compile php 5.3.2 into my server, the first two steps work just fine but when I get to the make install part it shows the libphp5.so and it just stays there and I have to cancel the install because it won't finish.
View 5 Replies
View Related
Sep 1, 2010
just switched our company from windows server to linux and everything is going good except we have 4 vpn connections though out the country coming to our server. All giving the client machines ip addresses of 192.168.x.x based on where they are located 192.168.1.x for the main location 192.168.2.x for a second location etc, and IIS could see the clients ip instead of the wan ip and was setup to block all ips except 192.168.x.x ip's and this worked great.
So i set up apache the same way, to allow only 192.168 ip's but i guess it doesn't work that way in apache for connections coming though vpn? 2 out of our 4 VPN connections are not static IP's, so the 2 that are I just add that ip to the allow list and that worked.But i don't think we should HAVE to get static ips for the other 2, that's one of the benefits of using VPN, especially if our old windows server didnt need it.Is there any way for apache to see the clients ip address for access or is there something somewhere else that needs changed for this?
View 8 Replies
View Related
Oct 6, 2010
I've got some strange looking requests in my access_log which I don't much like the look of. Can someone take a look and let me know if 1) it's possible for other people to use my server as a proxy, and 2) how I can stop them.
Code:
85.190.0.3 - - [06/Oct/2010:14:32:55 +0100] "CONNECT 213.92.8.7:31204 HTTP/1.0" 200 1606
85.190.0.3 - - [06/Oct/2010:14:32:55 +0100] "CONNECT 213.92.8.7:31204 HTTP/1.0" 200 1606
85.190.0.3 - - [06/Oct/2010:14:32:55 +0100] "GET http://vlad-tepes.bofh.it/proxy.txt HTTP/1.0" 404 1955
85.190.0.3 - - [06/Oct/2010:14:32:55 +0100] "GET http://vlad-tepes.bofh.it/proxy.txt HTTP/1.0" 404 1955
85.190.0.3 - - [06/Oct/2010:14:32:55 +0100] "CONNECT 213.92.8.7:31204 HTTP/1.0" 200 1606
[Code]...
View 9 Replies
View Related
Nov 14, 2010
My Server is 8.04 (hardy) and Apache is 2.2.8. I have been receiving emails from Apache each time a new stable release is available, most of which say you should install them due to security issues. The current stable release of apache being offered is 2.2.17
Q1) Do you recommend I upgrade from Apache 2.2.8 to 2.2.17?
Q2) Does this come automatically with my regular updates via Update Manager once the Ubuntu community thinks its stable enough (it appears that it doesn't)?
Q3) What is the best way to install the update?
Q4) Any concerns about installing it into a live environment? I don't have a development platform to try it in first.
View 3 Replies
View Related
Dec 7, 2010
When starting Apache I get this error in 10.10 (not in 9.10): [Fri Dec 03 21:14:22 2010] [error] (2)No such file or directory: could not open transfer log file /etc/apache2/${APACHE_LOG_DIR}/other_vhosts_access.log. Unable to open logs So where do I define APACHE_LOG_DIR ?
View 4 Replies
View Related
Dec 9, 2010
I'm looking to run some R scripts on a mysql database (engine =csv) from the apache webserver.
The goal is to record some statistics/numbers while someone is logged in, pass those numbers to r, run some statistics algorithms on the passed set of data and output an image file back to the logged-in user's html web page.
Doing this along with knowledge on how to call general r functions from within a php framework would be great.
View 1 Replies
View Related
