Networking :: Where To Find Rtl8191se Driver For Rhel5.2?
Jan 9, 2011I am a Linux newbie, where can I find the rtl8191se driver for rhel5.2?
And how can I install the driver?
ADVERTISEMENT
Ubuntu Networking :: Uninstall/Remove Old Wireless Driver To Make Way For New Driver - RTL8191SE?
Jun 21, 2010How To: Uninstall/Remove Old Wireless Driver to make way for New Driver (RTL8191SE)?
Here's the new driver:
I have been having trouble with my wireless connection intermittently disconnecting and reconnecting repeatedly (sometimes every couple of seconds). I posted a thread about this here on Ubuntu Forums titled: Ubuntu 10.45 & NetworkManager Applet 8.0: Connects & Disconnects Frequently.
OpenSUSE Wireless :: RTL8191SE Driver On Compaq Presario CQ62 Doesn't Work With XP Driver
Oct 23, 2010No wireless networking. The ethernet works fine, and the wireless interface itself works well in Windows 7 (dual boot). Tried: Ndiswrapper, notoriously quirky, does not seem to work with the XP driver (the oldest driver available for the RTL8191SE). The linux driver offered on the manufacturer's website lacks any installation instructions. I have no clue how to install a linux driver. SUSE seems to have two network managers that are constantly complaining about control: Network Manager and Yast. Neither are great and I am left missing my Ubuntu.
However, my audio only seems to work on SUSE. I have tried almost every distro on this machine. Ubuntu lacked sound and wireless, Fedora played startup sounds, but would not play an mp3 or wav file (fiddling with the mixer did not help). And Fedora also lacked wireless support. PCLinuxOS, my favorite, lacked sound and wireless. Tried some oldies too. ELE, DSL, Puppy, Ubuntu Netbook remix, Vector, Browserpuppy, Crunchbang, Cruncheee (just for experimental sakes) and probably others I am not remembering. So far, installing a free linux distro has cost me 14 dvd-R's and countless hours of installing, reformatting and reinstalling. Part of me really wanted crunchbang to work, as I love the minimalism and blacked-out theme.
I need wireless network access. The wireless light remains red in Linux and pressing the key does nothing to start the device. In Windows 7 it always lights white and works perfectly. Why hasn't SUSE adopted a gui for ndiswrapper? Other distros have it. Why is my brand new laptop, which is by no means abnormal in make or configuration, not 100% supported natively by any Linux distro? I just updated to the new kernel yesterday. So I should be running the most modern operating system available. Yet good-ol Windows 7 is my only fully functional environment.
OpenSUSE Hardware :: Rtl8191se Wireless Card Driver Install?
Aug 30, 2011I have tired everything I know how to do and I can not install the driver for the rtl8191se. I read the instructions that say to run:
sudo make
I have been through this before with Fedora. Ubuntu supported my wireless card but not my display so I am switching to this OS. Does anyone know how to install the driver on 11.4 suse?
joecamel@linux-1b2w:~/Downloads/rtl_92ce_92se_92de_linux_mac80211_0003.0620.2011> sudo makemake -C /lib/modules/2.6.37.1-1.2-desktop/build M=/home/joecamel/Downloads/rtl_92ce_92se_92de_linux_mac80211_0003.0620.2011 modules
make: *** /lib/modules/2.6.37.1-1.2-desktop/build: No such file or directory. Stop.
make: *** [all] Error 2
joecamel@linux-1b2w:~/Downloads/rtl_92ce_92se_92de_linux_mac80211_0003.0620.2011>
Ubuntu Networking :: RTL8191SE Wireless Connects But Fails?
May 24, 2010I have a Compaq Presario CQ42-195TX laptop with Ubuntu 10.04 (64-bit) installed on it and fully updated. It has a Realtek RTL8191SE wireless chipset which I am having trouble with - its wired connection is working perfectly.After starting up, I am able to see and connect to wireless networks. Once connected, the wireless functions correctly for a very brief period (under 10 seconds) in which I am able to access the Internet and so forth. The connection then stops working - although it doesn't get disconnected. When I say it "stops working", I mean I can no longer access the Internet and trying to ping the router gives me a "Destination Host Unreachable" error. If I disconnect from the network I cannot reconnect, nor can I connect to any other network.- though I can still see the list of available networks.
I thought that maybe this was a 64-bit issue, but I tried the Ubuntu 10.04 32-bit live CD and experienced the same problem.Please note that while this thread is about the RTL8191SE chipset, the RTL819xSE chipsets all use the same driver.Below are the results of various commands while connected to the network but after the connection has stopped functioning correctly:lspci -nn | grep "Realtek"
Code:
02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. Device [10ec:8171] (rev 10)
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast
[code]....
Ubuntu Networking :: Setting Up Wireless With RealTek RTL8191SE
Aug 15, 2010I have a Toshiba Satellite L655-S5061 laptop and dual-boot Windows 7 and Kubuntu Lucid Lynx. Windows detects and connects to the wireless network just fine, but in Kubuntu it will detect the network but can't connect to it. Sometimes Network Manager will say it's connected, but Konqueror can't load any websites. Plugging in an ethernet cable doesn't give me access to the internet, either.
View 2 Replies View RelatedRed Hat :: Loading New Driver Into RHEL5.4 ISO Image
Mar 24, 2010With my limited knowledge about integrating kernel modules into the initrd image. The issues is that currently when we are trying to install the RHEL5.4 image onto a 64 bit box we need to load the megasr driver initially before the ahci driver. Hence we use a seperate diskette for the same. We want to integrate the megasr files into the RHEL image itself.
View 5 Replies View RelatedNetworking :: Can't Find A Wireless Driver?
May 5, 2010could some one please post a link to where i can find a driver for a NETGEAR WG111v2 wireless nic for mandriva 2010
View 4 Replies View RelatedFedora Networking :: Find Wireless Driver For Mini 10?
Jun 26, 2010i am new using linux i install fedora 13 in dell mini 10 and i want to how i find and install the drivers for my laptop. I tried Ubuntu the last time and it has some hardware detection but i dont know how it made in fedora
View 5 Replies View RelatedUbuntu Networking :: Find A Driver For A Sprint 3G/4G Modem?
Jan 3, 2010I need to find a driver for a Sprint 3G/4G modem. I am running 9.04.
Sprint lists this as a U300 but the actual part is a Franklin Wireless FW300DOWMX.
lsusb shows this as ID 16d8:6002 CMOTECH Co., Ltd. and ID 0409:005a NEC Corp. HighSpeed Hub
so my box can see the part.
If I can get just the 3G working that would help a lot. I would be happy to do beta, even alpha, testing.
Ubuntu Networking :: Command To Find Wireless Driver Being Used?
Feb 27, 2011I'm trying to find a command or application that will tell me what drivers my wifi card is using.
I've been googling for a while now and all I get in return for any query I try are articles about folks having wifi troubles.
The Ubuntu install works fine but my Windows install seems incapable of connecting. I've recently realised that I think it all started when I installed 10.04. I think 10.04 might have rewritten the firmware on the wifi module and now Windows can't connect. I'm not sure if this is possible but it is the only solution I can come up with considering that I've now tried 2 different version of Windows and they both have the same problem.
Anyway anyone know of a command or app I can use to discover which driver my card is using at the moment so that I can begin my investigations.
General :: Installing Gcc In RHEL5 - Unable To Find Any Rpm
Dec 5, 2010I currently dont have the cd/dvd of RHEL 5. But i need to install gcc. I have been searching all day but wasnt able to find any rpm that is related to RHEL5. I download the following file
gcc-3.0.4.tar.gz
and extracted it, Then i run the following command
[root@WAN-Admin gcc-3.0.4]# ./configure
Configuring for a i686-pc-linux-gnu host.
Created "Makefile" in /root/new/gcc-3.0.4 using "mt-frag"
/tmp/cNf11430/cNf11430.pos: line 7: cc: command not found
*** The command 'cc -o conftest -g conftest.c' failed.
*** You must set the environment variable CC to a working compiler.
Now i am really hanged as what to do now. I added rpmfusion as my yum repo, i searched rpmpbone.net for gcc file for RHEL5 but it seems its not there for this version.
[Code]....
CentOS 5 Networking :: Find Out Which Package (rpm) Contains The Ipg (network Driver) Module?
Mar 22, 2011How do I find out which package (rpm) contains the ipg (network driver) module?
View 1 Replies View RelatedCentOS 5 Networking :: Find A Driver For Wireless Card (Atheros AR928X)?
Jan 5, 2010I'm trying to find a driver for my wireless card (Atheros AR928X) and I think it's ath9k what I need. As far as I know there isn't a linux driver for it, so I installed ndiswrapper to use a windows driver instead. The problem is that when I type modprobe ndiswrapper I get "bash: modprobe: command not found" (even as root). I know I'm missing something about modprobe, but I can't find any help on google. Anyway, I installed ndisgtk next, because I thought it would be easier, but when I go to System> Administration> Windows Wireless Drivers I get a message "Unknown error".Do you have any ideas on how I'll make ndiswrapper work?
View 3 Replies View RelatedSoftware :: Nstalling The Driver Of Nvidia GEForce 9800 GT On RHEL5.5 The Monitor Goes Out Of Range?
Nov 2, 2010After installing the driver of nvidia GEForce 9800 GT on RHEL5.5 the monitor goes out of range ?? What to do ?
View 5 Replies View RelatedNetworking :: Unable To Find Atheros AR8132 PCI-E Ethernet Controller Driver For CentOS / Fix It?
Jun 26, 2011I am unable to find Atheros AR8132 PCI-E Ethernet Controller driver for CentOS which is installed on my netbook.
I contacted DELL to provide me the driver and they said that they do not support Linux on netbook and I have to arrange it myself.
I told them that I don't need help in installing I just need the driver file to which they said that they don't have driver for Linux.
NIC is getting detected and works fine on the same netbook (Am dual booting Windows7/CentOS) with Windows7
When I type: ls -l /dev/ it does not show up eth0. Same result with ifconfig. When I type lspci | grep net it does show up something like Atheros Communications AR8132 L1 PCI Gigabit .
Debian :: How To Get RTL8191SE Wireless Working
Dec 24, 2010I have a Thinkpad X100e with Realtek 8191SE wireless, which I am having little luck getting to work with WEP in Debian Squeeze.The only Linux driver for this wireless chipset is r8192se_pci from Realtek (out-of-tree, but GPL; includes binary firmware); I can vouch for this, having built wireless-testing from git on the 19th. After installing the headers and building the driver from source (no warnings), the module loaded fine.When I try configuring wlan0, it appears to work.
I go ifconfig wlan0 up
iwconfig wlan0 key <key hidden> essid <essid>
iwlist wlan0 scanning
iwconfig
dhclient wlan0 #I've also tried with 'busybox udhcpc -i wlan0'
iwconfig shows association has succeeded; both dhclient and udhcpc succeed in getting a dhcp lease.But if I try accessing the network (busybox ping or links2), I get "Network is unreachable"; aptitude reports a 'temporary failure to connect'.If I do not boot with the 'quiet' boot parameter, r8192se begins randomly spewing messages through the console right about this time, indicating that the driver may be randomly disconnecting.
Kernel: linux-image-2.6.32-5-686
Debian squeeze, installed via debootstrap from Ubuntu.
Under Ubuntu, this driver is patched into the kernel; I have a functional connection with WEP under 2.6.35-24-generic on Ubuntu 10.10.wpa_supplicant on Ubuntu, however, causes random disconnects. Switching the card is not really an option, as Lenovo has a BIOS whitelist that prevents booting with an 'unauthorized' wireless card.
CentOS 5 Hardware :: Compatibility Of RTL8191SE With 5.4 ?
May 5, 2010I have a realtek RTL8191SE wireless card
I download a linux driver from the official website here : [url]
This is what i did :
step 1 : #make
step 2 : #make install
step 3 : #modprobe 8712u.ko
step1 ok
step2 ok
step3 : FATAL: Module 8712u.ko not found. (but this file exists)
I don't know if it is compatible with my centos5.4 did you know how to get the wireless work ?
Ubuntu :: RTL8191SE - Unable To Get Wireless Conection
Sep 25, 2010installing driver for RTL8191SE network card. At the moment wireless conection on the PC does not work only wired network is operational.
View 9 Replies View RelatedOpenSUSE Hardware :: Realtek RTL8191SE And No Wifi Access?
Aug 28, 2010I have used google and read a few topics here at this forum. ( especially this Getting Your Wireless to Work was very interesting for me ) But it is useless for me, because I am newborn in GNU/Linux. I use openSUSE 11.3 with KDE. I have read, that you need some informations about my hw. I hope these are
uname -r
2.6.34-12-desktop
lspci
0e:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller (rev 10)
hwinfo --pci
31: PCI e00.0: 0280 Network controller
[Code]...
Networking :: Eth0 Is Not Working In RHEL5
Sep 8, 2010I have installed RHEL-5 (2.6.18-53) on my Desktop (ASUS Motherboard with Realtek PCIe GBE Family Controler 8168). After installation eth0 is not detecting. I downloaded R8168 drivers from Relatek site, but I am unable to install as it's throwing the following error.
Wed Sep 8 21:49:41 IST 2010
make -C src/ clean
make[1]: Entering directory `/root/Desktop/REALTEK/r8168-8.019.00/src'
rm -rf *.o *.ko *~ core* .dep* .*.d .*.cmd *.mod.c *.a *.s .*.flags .tmp_versions Module.symvers Modules.symvers Module.markers *.order
[Code]......
Networking :: Ping And Telnet In Rhel5?
Feb 3, 2011my company there is 1 RHEL5 server and around 50 systems connected to it( running windows ). I want to know who is pinging or telneting to the server how can I find this information on the server OR where should I look for this information in the linux.
if I want to explore on this topic (i.e. who is trying to connect to server, from where user accessing server, whats his/her ip, whats his/her os etc. ) where should I look for it on the net ??
Networking :: Squid Installation On RHEL5
Apr 6, 2010i need the steps for squid installation on RHEL 5 step by step cz i am new in linux ( assume that i have the squid package in usb stick ) .
View 2 Replies View RelatedNetworking :: Adding Persistent Routes In RHEL5?
May 13, 2011At work I have been given the "opportunity" to provide admin support on a bunch of RHEL3, 4, and 5 servers. My latest problem is, as the subject hints at, adding persistent (or permanent) routes on a RHEL5 server. I've successfully done this with a couple of RHEL4 servers by adding the relevant information to the /etc/sysconfig/network-scripts/route-eth0 file like this:
GATEWAY0=xx.56.200.129
NETMASK0=255.255.255.128
ADDRESS0=xx.56.200.250
On the RHEL5 servers I do not see a route-ethX file. Do I just add the file and the route info? Or has this functionality been moved to another location?
Networking :: Creating PPPoE Connection Using RHEL5
Apr 6, 2010i need help to create a PPPoE Connection ( Breoadband)using RHEL 5 cz my ISP use this type of connection .Plz if there is someone can show me the procedure step by step.
View 3 Replies View RelatedNetworking :: MacOSX To RHEL5 / 6 Ssh Connection Timeout
Apr 1, 2011I have a user using Mac OSX and ssh-ing to a couple of Redhat servers, one running RHEL5 and the other RHEL6. The user's connection seems to be timing out after 60 minutes or so of inactivity. The user is on the same subnet as the servers. Both servers have the same sshd_config files with the following entries with regards to timeout:
TCPKeepAlive yes
ClientAliveInterval 30
ClientAliveCountMax 99999
In a nutshell, his office Mac keeps getting dropped off both machines. Other machines, including the Mac he logs in with from home doesn't get timed out and keep the connection open. The log files are unremarkable and the switch port shows no errors
Networking :: Unable To Get The IPaddress For Wifi On RHEL5
Apr 27, 2010I'm new to Linux, i have couple of setups like
1. RHEL5 (2.6.18-128.el5) running fine on VMware(6.5v)
2. RHEL5 (same version of ker) running on Laptop (DELL Latitude D710)
there is a wireless modem which running at home with that i was being able to access the internet from VMware image running with RHEL5.
BUT internet does not work from the laptop. Network manager are running on both VMware image and Laptop.. What is the steps i need to follow to get WiFi Enabled so that it should pick the ipaddress from Wireless Modem to get internet access to my laptop.
Networking :: RHEL5 - How To Configure Wireless On Laptop
Nov 13, 2010in RHEL5 I want to configure wireless on my laptop but after many procedures followed none of them worked? how to do it? my laptop is HP520
View 4 Replies View RelatedUbuntu :: Error "Could Not Find A Compatible Opengl Display Resolution. Please Check Your Driver Configuration. (Error: Couldn't Find A Matching GLX Visual)"
Jul 22, 2011I am having issues with 3d I am trying to start up a game called auteria but it displays this error "Could not find a compatible opengl display resolution. Please check your driver configuration. (Error: Couldn't find a matching GLX visual)" I am on ubuntu 10.10 could anybody give me a solution on how to fix this issue?
View 5 Replies View RelatedNetworking :: Configuring Squid As Transparent Proxy In RHEL5?
Jun 11, 2009Need a bit of help from the linux community. Lately, I have been trying to configure squid as transparent proxy on my server running on RHEL5. I had gone through few articles on web abt how to configure it and configured squid accordingly adding http_accel_xyz settings and then configuring the NAT using iptables. But while restarting squid there were warnings about "unrecognized: http_accel_..." in parseConfigFile.What I could get from these is that probably I need to recompile squid adding transparent proxy support. I downloaded the new squid 3.0 and tried to compile it.But unfortunately, the 'make' command fails giving library errors.I have been stuck with t now as the new squid does not compile and old one does not support the transparent mode.could compile the new one and what supporting libraries do I need to compile it successfully and also from where can
View 7 Replies View Related