Networking :: Tomato QOS Does Not Work - Looking For Alternative With VPN
May 11, 2010
I need QOS on my network to limit bandwidth on an ip/mac address level, while monitoring bandwidth, banning sites, and keeping VPN (openVPN). Tomato is nice and simple, elegant graphs and user interface, and fits nicely on a wireless router (love to save hardware space), but the lack of a true QOS is getting annoying (bandwidth hoggers! would like better solution than to keep surprising them at their desk and asking nicely to check their bandwidth usage).
Is there a better solution to my problem? I'm I going to have to go full fledge Linux on a computer tied to wireless router and comcast to satisfy all that I need? or is there a better linux-like software I can put on my router (wrt54g v.3)?
View 3 Replies
ADVERTISEMENT
Dec 8, 2010
i have dlink dir-300 router which i flashed to dd-wrt v24 preSP2 (Build13064. I wish to try openwrt now,but i do not know how is openwrt Different from dd-wrt? Does any one have any info regarding this? All i read was openwrt is much more linux like than dd-wrt.
View 5 Replies
View Related
Mar 20, 2010
My main wireless is an ActionTek DSL modem: it handles my incoming DSL, all my DHCP and DDNS, and it's a good Wifi base station throughout the house. Life is Good. I want wired access to a desktop PC upstairs: I tried a USB wireless stick, and it just isn't cutting it. I'm hoping I can use an old WRT54G wireless router, install some hew firmware, and use it as a wireless access point. I would like to plug the desktop into the WRT54G (cabled), have the WRT54G get a DHCP address and register the desktop's hostname in DDNS (wireless), and have everything work.
Q: Is "wireless access point" the correct term here?
Q: Should I go with OpenWRT (suggested in a previous post: looks very promising), DD-WRT, or Tomato?
View 4 Replies
View Related
Jan 16, 2011
I am looking for a router and trying to decide which one to go with based on the firmware I will want to use. I like how Tomato has alot of graphs and can show alot of graphical data. Does DD-WRT or Openwrt have as many graphs available?
View 1 Replies
View Related
Dec 10, 2010
i can't quite figure it out for myself. does ASUS WL-520gU Wireless Router with DD-WRT/Tomato 2.4 kernal support ntfs on its usb?I would like to share out my NTFS external HDD from that router.
View 1 Replies
View Related
Feb 5, 2010
Using Ubuntu Server 9.10 x64 and a tomato router to act as a wireless bridge to connect to another router. The reason I ask is because I do have the router set on WDS mode on the tomato firmware. I think I have it configured to the best of my ability, but when the interface is up, the signal doesn't get pushed out (no received packets) and it gives something at the bottom of an ifconfig eth0 "Interrupt:28".
View 4 Replies
View Related
May 18, 2010
I've managed to confirm that I can reach my home network via ssh from a remote location through my SMC Barricade when it is directly connected to the desktop machine but when the second router is put back into the chain ssh requests time out. The second router is a Linksys WRT 54GL running the Tomato firmware. The chain looks like this: ISP's router (bridged) --> Barricade -->WRT54GL-->desktop
The Barricade has port 22 forwarded to the Linksys' WAN address and it in turn forwards to the desktop address. It appears that it is a setting on the Linksys firmware that is preventing the remote connection. I've looked through the various settings many times but cannot see anything that would cause the problem.
View 4 Replies
View Related
Mar 25, 2010
What are the pros and cons of various current model ADSL modem routers for use with DD-WRT, OpenWRT or Tomato? There are, of course, hardware compatibility lists (HCLs) for each of these (DD-WRT, OpenWRT and Tomato) but many of the models are no longer available and there are so many that researching them all would be onerous. Many pages on the Internet recommend the WRTG54L and that would be great but it is no longer an option except second user which is increasingly difficult. What are the pros and cons of the various chipsets: ADM5120, AR7, IXP4xx and BCM63xx?
View 4 Replies
View Related
Mar 20, 2010
I'm trying to set up my router, with tomato firmware, to save the bandwidth usage information. One of the 'save history' choices is "CIFS" ... I'm lost as to how to create this save area..anyone able to give me a link to a 'how to' ...or if you've done it, perhaps a step by step?
View 1 Replies
View Related
Sep 17, 2010
I have a device that must use a real IP address. Currently, my ISP uses DHCP and I can have up to 4 real IP address assigned. However, the cable modem only have 1 ethernet port and it's connected to my router (running Tomato, but can run DD-wrt or other Openwrt if required). Question stems from how I can connect the additional device, requiring a real IP? would be to get a switch and connect to the CM, Router, and Device. But alas, I want to avoid this route, since:
my wiring cabinet in my home is drawing lots of power and heat already Device will be unprotected by any firewall unable to monitor the traffic to/from device.Besides, what would be the FUN in that? what I want to do is to configure the router, so that one of the switchport is removed from the normal br0 bridge. Instead, I want to make it behave like a switch on the WAN port. What's the best way of doing this? Should I create another bridge on the WAN & the device port? Can a single port belongs to two bridges? or would I need to create a subinterface first? Would I need a DHCP-relay? Am I expecting too much from my poor cheapie router?
+------+
| CM |
+--++--+
||
+----WAN---------------+
[code]....
View 4 Replies
View Related
Oct 13, 2010
I know that SSHFS is the way to mount the file and directory on remote server. It has many advantages such as security, convenience, fast and so on. I wonder if there is disadvantage of SSHFS and the alternative to it? I am looking forward to your reply.
View 2 Replies
View Related
Aug 24, 2010
I run a web server on Fedora 12, principally using Apache, MySQL, and PHP. I host a variety of sites, one of which is a family website that contains semi-sensitive personal data for several hundred extended family members, who all have access to the database-driven site.
Until now, I have been using a self-signed SSL certificate to encrypt the data as it is read and written back and forth from my database. Family members have simply had to put up with clicking past certificate warnings as they enter the site, as most browsers flag self-signed certificates as bad. It hasn't really been that much of a bother, but I'd love to do it more professionally. I have looked into buying SSL certificates, but it's a site I host for free and would rather find a cheap or free alternative if possible.
So I'm just fishing for ideas to work with. What are some alternatives to using SSL certificates for moderately strong website encryption? So far, I run only one host on the domain, but may eventually need encryption that would support multiple hosts. Or does anybody know a way to make self-signed certificates work on most popular browsers without being flagged as suspicious?
View 7 Replies
View Related
Nov 26, 2010
I have a multihomed server, connected on two different ISPs. All default trafic goes to ISP1 via wan1. There is special local processes in my system, what must go through ISP2 via wan2. This processes are make connections to TCP:80.
What did I do:
[root@localhost ~]# ifconfig wan1 10.44.8.252 netmask 255.255.255.0 broadcast 110.44.8.255 up
[root@localhost ~]# ip r r default via 10.44.8.1
[code]....
I see that frames goes out with SRC of wan1... I tried this:
[root@localhost ~]# iptables -t nat -I POSTROUTING -o wan2 -p tcp --dport 80 -j SNAT --to-source 192.168.86.2
and saw:
[root@localhost ~]# telnet 194.87.0.50 80
[root@localhost ~]# tcpdump -i wan2 -nnt port 80
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
[code]....
The connection did not established... Conntrack does not see it!
View 2 Replies
View Related
Nov 12, 2010
i am a fresher to linux. presently i am using CentOS for getting some experience in that. but i have a problem with internet connection using in CentOS. i am using prolink USB ADSL2+ modem (H5200U). so, i request from all readers to give alternative answer.
View 2 Replies
View Related
Apr 6, 2010
Using Centos 5.4 I've successfully set up pppd and wvdial to automatically dial out but I need wvdial to call an alternative number if the number is busy or dialout fails for some other reason and I cannot get this to work. I've gone back to basics and tried manually soliciting wvdial with a minimal wvdial.conf:
[Dialer ppp-client]
Password = secret
Modem = /dev/ttyS1
Phone = 11111111111
Phone1 = 22222222222
[Code]...
View 3 Replies
View Related
Apr 23, 2009
I have this annoying problem since day one.I am testing out Red Hat RHEL5, everything is fine except DNS look up.If I ping www.google.com, it doesn't work, ping ip address it all works;if I bring up browser, put www.google.com it doesn't work, can't find the name, however, simply put ip address there it works.My DNS seeting seems ok, and the DNS works from Windows box.
View 2 Replies
View Related
Jan 12, 2011
I am trying to set up an unused machine as a web server for my students.
I originaly tried with Redhat 9 and had the same problems. I am using an HP Pentium 4 system with 2 network cards.
1) The built in Realtek RTL8139 configured as eth0.
2) An add in Broadcom BCM5782 Gigabit card that was added I presume when the built in card failed (we have a number of machines like this around the school), configured as eth1.
I did not realize the second card was installed when I had Red hat 9 on the system, but I discovered it after installing centos 5.5. I have tried to configure the system to use DHCP with and without getting the DNS from the provider, and both ways the system complains that there is no connection, check the cable, so it will not activate the device.
When I configure the device to use a fixed IP, I can configure the device, but I can't ping anything on the network other than myself. I suppose it is possible that both network cards have failed, but I get green link lights with both cards, when I connect them to my router, so I am at a loss as to why neither board seems to work. I don't have a spare network card to slide in because the computer takes a special mini card. Is there an easy way to test the board to see if the board is a problem?
View 2 Replies
View Related
Aug 24, 2010
I just started having a problem with my 10.04 laptop a few days ago, maybe Thursday, last week. When the computer is plugged into my home network (standard 192.168.1.1 sort of IPs) it works fine, but when I try to connect to my work network (130.15.90.XX) I am unable to pick up an IP. The router in my office is working fine, all the windows boxes can connect.
I've also noticed that when the computer is plugged in at work the notification icon for the networking indicates it is looking for a wireless connection (rather than the normal up/down arrows), even if wireless is deactivated
I can set a static IP in /etc/network/interfaces and everything works, so it seems to be a DHCP problem?
View 1 Replies
View Related
Jun 20, 2009
I've been experiencing a problem with Fedora in which when I enable Wireless in Fedora, Wireless networking does not work in windows. HOwever, when disabled, it works correctly. Windows claims it is "not able to find any networks to connect to"
EDIT: It seems that when wireless is disabled manually on fedora before shutdown, there are no problems in windows.
View 14 Replies
View Related
Aug 25, 2009
Networking on Fedora 11 doesn't work for me on various machines. Fedora 10 does, but only if you don't do an update.Why does Fedora get worse the more you keep it up-to-date?
View 1 Replies
View Related
Apr 30, 2011
I'm an undergraduate Physics student, and I would like to install a software for helping me with relatively simple tasks, such as calculating integrals, plotting graphs and performing some general numerical calculations. Can someone indicate me a good software for these purposes, preferably an official Debian package?
View 11 Replies
View Related
Feb 14, 2011
is there any recommended Ark alternative for KDE?I really don't like that program.
View 6 Replies
View Related
Feb 4, 2010
I have used TurboTax online for several years to do my return....this year they are refusing Firefox running on a Linux OS!Anyone know of an alternative that is Linux friendly?
View 9 Replies
View Related
May 8, 2010
Does any know of an alternative???
View 4 Replies
View Related
Jun 23, 2010
Does any of an alternative to Gwibber that can connect with Facebook and do what Gwibber claims it can do.
View 6 Replies
View Related
Jul 24, 2010
i've been searching for GTD app alternative to OmniFocus but till now i couldn't find any REAL apps that's use the real methodology of GTD don't answer me with one of those apps 'cause i've tried them and they are either ugly or poor or both
-thinkingRock
-Doitnow
-Get Things Gnome
- Tracks
View 3 Replies
View Related
Nov 10, 2010
I'm using Lucid 10.04 and usually ssh to many unix server. I have created aliases with server name, that executes xterm command as below.
I'm getting frustrated by inability to copy and paste using keyboard shortcuts, always have to use middle button. Is there any alternative out there?
View 5 Replies
View Related
Feb 18, 2011
I use dual monitors and it's extremely important to me to arrange them and keep 'em reliable. So I have been looking for an alternative for DisplayFusion on ubuntu since 1 year but I couldn't find any good result, if you know any sort of good drivers or programs to arrange the desktop and scale backgrounds perfectly.
View 2 Replies
View Related
Mar 31, 2011
What is ubuntu 11.04 alternative iso? is it server and desktop in one? it seems to be bigger than the server and desktop iso.
View 2 Replies
View Related
Apr 12, 2011
Been playing around with the new Ubuntu 11.4 and really don't like it. The previous versions were much better. How long will Ubuntu 10.10 be supported and what would be a good alternative to eventually switch to?
View 9 Replies
View Related