Ubuntu :: Alternative To Turbo Tax?
Feb 4, 2010I have used TurboTax online for several years to do my return....this year they are refusing Firefox running on a Linux OS!Anyone know of an alternative that is Linux friendly?
View 9 RepliesI have used TurboTax online for several years to do my return....this year they are refusing Firefox running on a Linux OS!Anyone know of an alternative that is Linux friendly?
View 9 Repliesi am running some programmes on gcc compiler and i have to check same programmes on turbo c compiler. But i do not have this c turbo compiler.i have done some searching and found that it is not possible to install turbo c directly ,for this i have to use dosbox.ok now the main question is that for this i must have c++ setup which i do not have.
View 6 Replies View RelatedI want to install turbo prolog complier in ubuntu 10.10.
View 2 Replies View RelatedI have installed Ubuntu server 10.10 on my new computer which uses AMD Phenom II X6 1090T. But I have noticed that my CPU cores were not able to run at 3.6GHz at any time, even when I only have one CPU-intensive computing job. They are either at 3.2 GHz or 800 MHz, like this
Code:
$ cat /proc/cpuinfo | grep -i "cpu Mhz"
cpu MHz: 800.000
cpu MHz: 3200.000
cpu MHz: 3200.000
[code]....
My maximum CPU frequency seems to be locked at 3.2 Ghz:
Code:
$ dmesg | grep "pstate 0"
[ 1.595918] powernow-k8: 0 : pstate 0 (3200 MHz)
I goggled around and it seems that Linux 2.8.35 kernel have solved the problem. I just do not understand why it does not work on mine.
Code:
$ uname -a
Linux hogwarts 2.6.35-22-server #35-Ubuntu SMP Sat Oct 16 22:02:33 UTC 2010 x86_64 GNU/Linux
I have Phenom II X6 1055T. If Turbo Core kicks in, the speed should go up to 3.2GHz.
Problem is, it never kicks in. My kernel enabled Turbo Core already.
dmesg :
I am guessing, TurboCore depends with the P-State reading and cpu frequency thingy. As you can see, P0 are not 3200MHz (if my hypothesis are correct). Or perhaps i am wrong. I tested by not doing nothing and running folding program on one core with conky monitoring. Conky reads 5 cores at 800MHz, and one core at 2.8GHz.
TurboCore is enable on windows xp. I can see the core sometimes goes up to 3.2Ghz occasionally.
I have a server hosted elsewhere and I am wondering if there is a way to know if my Server has turbo mode enabled or not?
I have i5 @ 750 Intel. It support Turbo mode but am not sure if my server has got it enabled or not.
In our college all the systems (running on windows xp) have TURBO C/C++ installed on them which we use for C programming. I recently installed ubuntu 10.04 on me laptop (DELL Inspiron 14R (N4010) with some modifications) i read somewhere on the internet that Gedit can be used for writing a programme in ubuntu which can be compiled using gcc. Well if i use Gedit rather than Turbo c will i experience any differnce?, i mean is there any problem in doing so?? Or i should prefer running turbo c using DOS BOX?
View 7 Replies View Relatedhow do I set up wire to accommodate turbo tax and i tunes?
View 2 Replies View Relatedpresently am doing an LTSP project i have sucessfully insatlled DosBox and Oracle in fedora9 now i wanted to install tsam ( Turbo Assembler )
View 1 Replies View Relatedis there any way of using wherey() of turbo c function in gcc compiler like we have for gotoxy(), clrscr() functions.....
View 2 Replies View RelatedI have an acer 532h aspire one, running ubuntu 10.04.
Basically, I bought a Telstra Turbo USB broadband stick and I've been having a bit of hell getting it to work. First I couldn't get the computer to recognize it had been plugged in at all. I downloaded the modeswitch packages to no avail. I tried a few other terminal tweaks but they didn't change anything either. I left the card in and restarted the netbook and it finally recognized the wireless card. I was able to surf the internet for an hour or so a couple times. But after stowing the computer away for a couple hours and turning it on again, I found that this work around was no longer effective. So now I'm back to the blue light never blinking and I have to tether my phone and pay ridiculous data charges because I'm in the middle of nowhere.
I'm really new at troubleshooting things that don't work right out of the box.
It's a telstra turbo prepaid wireless broadband. The stick isn't even recognized as removable media.
lsusb returns this:
Also this might be relevant:
Due to some reason every-time I boot the laptop the power governors reset themselves to "ondemand". Which causes my laptop to overheat until it shut-downs. I tried adding this line to grub Code: Select allGRUB_CMDLINE_LINUX_DEFAULT="intel_pstate=disable" which kinda worked, but only on cpu 0.
Code: Select allcpufreq-info
cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009
Report errors and bugs to cpufreq@vger.kernel.org, please.
analyzing CPU 0:
driver: acpi-cpufreq
[code]....
I've clean installed over a friend's win98 with Mint 7 (disc from lab a year? or so ago).
My Optus modem prompted the wizard and now always works fine,ok speed, and I updated Mint with 300 new files etc.
But my friend's new Telstra Turbo modem,[Sierra brand] although it shows a blue light flashing, doesn't get the wizard connection process started, and there's just NO sign on Mint that it's plugged in.
If I can get it to work, it will increase the number of people I know who use linux to 1.
I've got a dual Xeon 5570 (Nehalem) server. It clocks down properly, but never, under any circumstances that I've found, clocks up past its TSC. Even when running basically nothing but cat /dev/zero > /dev/null, nothing gets clocked higher than the TSC. Below is the turbostat output, which clearly knows what the hardware is actually capable of, but it never actually achieves it. I'm running Lenny, with backported kernel 2.6.30-bpo.2-amd64. I tried the 2.6.32 backport and there wasn't any difference. know where I should look next? BIOS settings? Do I need to change some kernel option and recompile?
# ./turbostat
Nehalem multiplier 22, TSC frequency 2933 MHz
Nehalem 4 cores active: 24 mult, max turbo frequency = 3200 MHz
Nehalem 3 cores active: 24 mult, max turbo frequency = 3200 MHz
Nehalem 2 cores active: 25 mult, max turbo frequency = 3333 MHz
Nehalem 1 core active: 25 mult, max turbo frequency = 3333 MHz
[Code]...
I just installed a new HP DL360 with 32 GB of RAM and a Intel Xeon X5550 which supports speed stepping and turbo mode. I've enabled turbo in the BIOS, but cannot seem to get CentOS 5.4 to make use of either of these features. I've been googling for a solution for a while now, and tried various things, such as installing cpufreq. However, when I type cpufreq-info, I get this:
# cpufreq-info
cpufrequtils 005: cpufreq-info (C) Dominik Brodowski 2004-2006
Report errors and bugs to cpufreq@vger.kernel.org, please.
analyzing CPU 0:
[code]...
Im a BCA 1 year student and just move from windows to ubuntu?we learn c and c++ in windows using "turbo c"but as im newbie to ubuntu i dont know what to do??
View 4 Replies View RelatedDoes any know of an alternative???
View 4 Replies View RelatedDoes any of an alternative to Gwibber that can connect with Facebook and do what Gwibber claims it can do.
View 6 Replies View Relatedi've been searching for GTD app alternative to OmniFocus but till now i couldn't find any REAL apps that's use the real methodology of GTD don't answer me with one of those apps 'cause i've tried them and they are either ugly or poor or both
-thinkingRock
-Doitnow
-Get Things Gnome
- Tracks
I'm using Lucid 10.04 and usually ssh to many unix server. I have created aliases with server name, that executes xterm command as below.
I'm getting frustrated by inability to copy and paste using keyboard shortcuts, always have to use middle button. Is there any alternative out there?
I use dual monitors and it's extremely important to me to arrange them and keep 'em reliable. So I have been looking for an alternative for DisplayFusion on ubuntu since 1 year but I couldn't find any good result, if you know any sort of good drivers or programs to arrange the desktop and scale backgrounds perfectly.
View 2 Replies View RelatedWhat is ubuntu 11.04 alternative iso? is it server and desktop in one? it seems to be bigger than the server and desktop iso.
View 2 Replies View RelatedBeen playing around with the new Ubuntu 11.4 and really don't like it. The previous versions were much better. How long will Ubuntu 10.10 be supported and what would be a good alternative to eventually switch to?
View 9 Replies View Relatedjust wondering if there is an alternative to Ssreenlets available? Love the program, but on 11.04 a lot of the Screenlets just don't work yet. Yes, I am aware that this may also happen on an alternative, but was just wondering, if anyone knows?
View 8 Replies View RelatedI'm fairly new to the Ubuntu community, having dl'ed Ubuntu 11.04 little more than a couple of weeks ago, deleting my Windows completely. I'm sure this has been said before, but I'm trying to find a good VoIP I can use to call my Windows using girlfriend who is currently very far away. Skype for Linux just crashes for me after a minute or two, Ekiga only allows me to make a call to any contact ONCE, then I can never do it again, tried Faceflow and couldn't even see or hear her. I'm running out of options, it seems. Will I really have to go back to windows just to see her?
View 5 Replies View Relatedi'm used to input the following command when tracing a port or interface in Solaris 9/10.This a packet sniffer.
==================================
snoop -o <Outputfile.txt> -x -ip <TraceIP>
==================================
is there a packet sniffer command which performs this on Ubuntu 9.04 (Jaunty)?
I've been having some issues with the speed of firefox recently (on a netbook) and have been trying out other browsers such as chrome and midori. Currently I'm using xmarks, which fits my needs nicely however, I'm looking for an alternative that gives similar functionality and would allow me to access my bookmarks from several different computers (using both midori and chrome browsers).
xmarks has a development version for chrome, which is not working at the moment, and I cannot find any plans for xmarks in midori.
finding a Virtual Box alternative for 64 bit?
View 7 Replies View RelatedI've read through others posts about installing Dreamweaver with WINE, but want to know what everyone here recommends. I see Quanta and Bluefish are pretty popular but haven't tried either one. Is it better to just use Dreamweaver or one of the alternatives?
View 3 Replies View RelatedIs there an alternative good alternative for the webcam software manycam for ubuntu 10.04?
View 6 Replies View Related