I have a Laptop running Fedora Core 10 (64 bit). I recently have fallen in love with window managers (openbox to be precise); the Problem is, when in these window managers, I cannot connect to wireless APs. I've tried restarting the network manager, but alas it has no effect. So, I'm left with terminal commands (YAY!!! I love any chance to use those.) so is there a command that I need to use to connect manually?
View 6 Replies
how do you manually reassign a wireless bridge in xubuntu 10.04.. Or basically configure it without having to do so through the installation process.. Hopefully there are commands for it.
View 1 Replies View RelatedI manually reset my router to defaults. Then I changed my router default password, SSID, passphrase, and disabled remote management. I used:
WPA-PSK [TKIP] + WPA2-PSK [AES]
security on the router. When attempting to connect, I use the "WPA & WPA2 Personal" option. This is really strange. I can see the SSID on both my laptops, but I can only connect with one now.
Installed Ubuntu 9.1 - Linksys WUSB600 connects but no network access. I get "server not found", so no data being xmtted. It worked fine in ver 9.04 but not in 9.1
View 1 Replies View RelatedI recently installed the latest version of Kubuntu in a dual boot system with Windows XP on a Dell laptop. The dell laptop has a broadcom wireless device, and I was able to set up the driver and get wireless working. Then I booted into windows XP to make a whole bunch of updates/driver installations, and when I booted back into Kubuntu it would not connect to the wireless network. I am pretty sure the device is still active, because it picks up on the wireless networks in the area. But KWallet does not open to ask for my password on booting. Something is not set right, but I can't tell what.
View 1 Replies View RelatedI am just staring in the world of Linux (I want to stop eating what Microsoft leaves behind). I have this minor problem using Ubuntu 10.10 (Maverick Meerkat). The OS had detected my CNET Wireless-G USB Dongle (CWD-854). I have a Linksys Wireless Router (WRT-120N). I see in the top right corner of the OS the wireless icon. When I click on it, it displays the SSID of my wireless. When I click on it, it ask me for my wireless password. It start to try to connect to my wireless router, but it always end up disconnecting.
View 3 Replies View RelatedI have a wireless USB (TP-Link TL-WN620G) adapter on F10( 2.6.27.38-170.2.113.fc10.i686). I have installed the drivers and it is detecting my router. But it keeps asking for network password with repeating a dialogue box although I entered correct password. I have configured the wireless configuration using NetworkManager.
View 6 Replies View RelatedWhen fedora initially starts up, the network manager shows all the available wireless connections available to me. However, when I select my wireless connection, it will go through the loading process where it shows the two green dots and the circular moving blue streak, then it prompts me to put in the wpa password.
This is where the trouble starts...when i input my wpa password, it will proceed to attempt to connect to my network but it never succeeds in doing so--it will keep on asking me to input my wpa password. when i finally get sick of doing it over and over again, i just hit cancel instead of retrying to connect.
After i stop trying to connect, the network manager no longer shows all the available wireless networks--the list is completely empty, and i can find no way to get the list to show up again, with the exception of restarting my computer.
I am able to connect to the internet with a wired ethernet, but id like my wireless to work.
I find it interesting that the only CLnetwork manager is nmcli(). Are there others you know and love?
I have been trying to use nmcli(), and I am having some difficulty.
When I run...
Code:
I get a great list of available wireless connections, but it seems to me I am not getting the 'right' information, or I do not know how to implement the information I am getting.
When I try to connect using the
Code:
It tells me, 'Unkown connection'.
So I wonder in the devices list is the SSID, in the single quotes, not the id the 'up' command requires? Or how do use the SSID? As far as the UUID, this option works for me, but I can only see the UUID if I had already once before connected to this connection. Is there any way to see the UUID of a new connection?
in short : installed 9.10 on a dell inspiron 600m which has a broadcom bcm4401 ethernet and an intel PRO/Wireless LAN 2100 3B mini PCI. At this point, i'm not too picky about which one works (meaning neither of them currently work). nm-tool seems to pick up on both : the broadcom (eth0) is using the b44 driver, State is unavailable; the intel (eth1) is using the ipw2100 driver, it's State is disconnected.
i have encryption turned off, and the wireless sees a number of AP's (including mine).
i'm jumping off the good ship m$ and determined to make this work!
My Wireless worked once on Ubuntu but when I disconnected it i got stuck with connection trys that never succeed. On the two little lights only one is green, and when Ubuntu offers to have another try the password is not the same as the one I typed before (and of course is not the good one)
View 2 Replies View RelatedI am new to Linux and just put Ubuntu on my pc when i am using Ubuntu my wireless keeps connecting and disconnecting. Im not sure what I am suppose to do.
My laptop is a Sony Vaio NW130J
The wireless card/driver is Intel WiFi link 5100 AGN
I dont know anything about Linux so if you could please explain it as easy as possible.
just installed Ubuntu Netbook Remix on my new HP Mini 210 (info). Everything is working fine -- webcam, shortcut keys etc, but I'm having some difficulties connecting to our wireless network. When I click on the network panel item, there are no networks visible. Now, I also have Windows 7 Starter on the netbook (what I'm using right now) and that's able to connect to the network fine.
View 2 Replies View RelatedI have a computer running Ubuntu, and a MacBook Pro. I need to buy a decently cheap wireless router that I can hook up to my Ubuntu so that it will send wifi signals and I can use the wifi to go online with my MacBook Pro. I was about to get one today, but remembered how Ubuntu is picky about working with things like that. I'm only going to be using it to get signals around the house which isn't that big at all.
So what would be the cheapest and decently efficient wireless routers that I can use which Ubuntu will cooperate with?
I always have been a windows user and my brother decided to install Ubuntu 10.10 on my laptop, before he completed the full installation so I could use my wireless card. I have been reading various posts for the last two days and i am none the wiser. I have a linksys wireless G notebook WPC54G Ver.5. I have the software (drivers) for the card saved on my machine and have also installed NDISWrapper?
View 3 Replies View RelatedI just bought a new laptop. This one came with win7 home. The wireless works perfect. Today I installed ubuntu 10.4 next to windows. I made a first connection which went easy. But after 30 seconds it disconnects. Then it tries 30 seconds to reconnect. It reconnects and after 30 secodns or so, it disconnects again. It keeps doing this all the time on ubuntu while on windows it works without any problems. This is what sais under the device manager for my wirelesscard stuff:
Intel(R) WiFi 1000 BGN
Microsoft Virtual WiFi Miniport Adapter #2
Microsoft Virtual WiFi Miniport Adapter
Realtek PCIe GBE Family Controller
[Code]...
i have a Levano S10e intel atom preccessor and the net-book is not connecting wirelessly to the network. i have tried at two locations and even plugged in a exterlal wifi adapter. it wouldnt connect then either, the only way to get connected is to use a cat5 cable. here is the ifconfig output with no cat5 inserted and it not connecting to the internet.:
[Code]....
I've recently installed Natty and the only problem I have with it so far is attempting to connect my Huawei E5830 Three Wireless modem via USB and successfully connecting to the Internet from it. I've fiddled around with the network settings and nothing, I've also done some work in the Terminal to try and correct the problem.
View 1 Replies View Relatedi ahve just installed fedora 11 kde edition and i used to use fedora 10 after finish installation i edit the connectons to connect to my network im in lan network but i connect my cable to an access point to free using my laptop anywhere after adding every thing (wep key ,static ip's,) as i used to do and i have the connected sign at the system tray.i open the browser but no internet connection pinging the gateway returns "Destination Host Unreachable".
View 1 Replies View RelatedMy brother is trying to connect his laptop to his university's secure wireless network and is running into some problems.
He is receiving the following error messages with private info removed:
kern.log
=========
Code:
Jan 13 09:42:52 laptop kernel: [ 91.744131] wlan0: associate with AP
Jan 13 09:42:52 laptop kernel: [ 91.746454] wlan0: RX AssocResp from REMOVED (capab=0x421 status=12 aid=0)
[Code].....
Also, in my research it appears that people that have Wireless problems often install the linux-backports to see if this fixes the issue.
I successfully did a dual boot on a HP Mini 1001TU netbook. However, the wireless doesn't connect. Over the internet, someone had a similar problem with his Dell notebook using a Karmic and said that Karmic has a bug that doesn't install the "Broadcom STA wireless Driver" and recommended a prerequisite wired internet connection then the following command line:
sudo apt-get update
sudo-get -reinstall install bcmwl-kernel-source
Followed by a reboot which solves the problem.
I would like to try this out but the netbook only accepts a USB -router connection but my router doesn't have a USB port.
I'm having trouble connecting to our home wireless network in Kubuntu Lucid. I was hoping someone here might be able to help. I can connect with no problem in Ubuntu and Xubuntu; I'm having difficulty in Kubuntu only. It might just be me being unfamiliar with the KDE network management app, I don't know.
1. I click on the network icon in the system tray, and choose "manage connections". I click on the "wireless" tab, and click "add".
2. I enter the name of our network in the SSID field (our router doesn't broadcast its SSID; however, if I click "scan" the neighbors' wireless networks do appear in the list) under the "wireless" tab, then I go the "wireless security" tab, and choose "WPA/WPA2 - personal" and enter the password. I click OK.
3. Now when I right-click on the network icon and choose "create network connection", the new connection for our network that I just made shows up in the list, but it has an icon showing a pen on paper instead of the broadcasting signal icon that appears next to the neighboring networks. It also says my connection is "insecure", even though I chose WPA and put in the password. (Neighbors' networks do say WPA, WEP,etc.)
4. I select my network connection that I created above, and click connect, and nothing happens. No connection is created. how the KDE network app works; I've used mostly XFCE and GNOME in the past, but I've heard good things about Kubuntu Lucid and really would like to take it for a spin. However, this computer has only a wireless connection, so I really need to get it working.
I have setup my wireless card via ndiswrapper and I can see that if I perform an iwconfig that the card is wlan0. I have attempted to connect with the router but I can't get any connection.I know the password is: ########## (10 digits long) but for the life of me I can't get it to work via command line.
View 2 Replies View RelatedI downloaded the latest version of Ubuntu yesterday (10.04 LTS) for the first time and it worked like a treat, with the Internet conencting immediately without any problems. However, this morning I turned on my laptop and despite seemingly connecting to the network, Ubuntu won't conenct to the Internet. It is also repeatedly asking for me to re-input the WEP Key despite it being correct and always automatically inputted.
Machine:
Quote:
Advent 8117
Intel Core Duo T2080 1.73GHZ
1GB RAM
RaLink RT7
I've been looking around for hours on the Internet to try and find a solution but to no avail, even though people do seem to experience similar problems.
I am unable to connect to my home wireless network when WEP 128 bit encryption (open system passphrase) is turned on however I can connect when I disable the encryption?
Code:
1- Compaq nx6110 running Ubuntu 10.04 LTS Lucid Lynx
2- lspci
02:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
3a- ifconfig
lo no wireless extensions.
eth0 no wireless extensions.
eth1 unassociated ESSID:"101"
[code]....
I would share my long awaited success with connecting my ubuntu laptop up to my universities (University of Western Sydney) wireless network. The rumors appeared true and they have finally implemented 802.11x authentication instead of that horrible java app netdirect. I am sure you've been cursing at its erratic stability. There is no linux documentation for airUWS-Lite nor anything more imformative than there windows/mac point and click steps found at [URL]. However with a few simple clicks you can have stable working connection.
When connecting make sure you have theses settings.
Security: WPA & WPA2 Enterprise
Authentication: Protected EAP (PEAP)
#This is the settings that does not present itself correctly
Anonymous Identity: leave blank
PEAP Version: Automatic
Inner Authentication: MSCHAPv2
Username: <YOUR 8 DIGIT STUDENT NUMBER>
Password: your regular password
i own a lenovo ideapad y550 and cant connect to wireless. i am a first time ubuntu user
i ran the command lspci -v | less and got the following output:
08:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10)
Subsystem: Lenovo Device 3878
Flags: bus master, fast devsel, latency 0, IRQ 50
Memory at f7200000 (64-bit, non-prefetchable) [size=64K]
[Code]....
Ubuntu 10.10 connects to a DSL modem without any problems - I mean I just plugged it in and it worked - GREAT I bought a wireless router so I could connect my netbook and now my Ubuntu machine which is simply using a cable from the wireless router now DOES NOT connect. I tried a windows machine on the wired connection from the wireless router and it connects without a problem. OF course if I remove the wireless router from the chain, i.e. simply connect directly to the modem it works straight away.
View 6 Replies View RelatedI've just installed Ubuntu 10.10 and everything seems to be working fine, but I can't seem to connect to my wireless network. I am able to see the wireless networks nearby, so I'm guessing that means the drivers are fine and the hardware is working. When I try to connect, I am seeing the wireless networks of my neighbors, but mine isn't showing. So I manually enter the information in and try to connect, but it doesn't seem to connect. I enter the WEP key and it attempts, then the WEP key screen pops up again, as if I entered the key incorrectly. I've tried many times and I'm 100% certain my key is correct. By the way, the chipset is: Ralink RT61
Which means it really should just work out of the box.
Only been using linux for about 2 weeks now. Yesterday my internet worked without a hitch now today all of a sudden it wont connect. I had the "Install problem! The configurataion defaults for gnome manager have not been installed correctly" so I deleted my music directory and now it boots fine, dont know if that might be part of the issue/ I dual boot win7 and i can get wireless on that partition but not ubuntu
View 9 Replies View Related
