Networking :: G USB Dongle Not Connecting To My Wireless
Oct 19, 2010
I am just staring in the world of Linux (I want to stop eating what Microsoft leaves behind). I have this minor problem using Ubuntu 10.10 (Maverick Meerkat). The OS had detected my CNET Wireless-G USB Dongle (CWD-854). I have a Linksys Wireless Router (WRT-120N). I see in the top right corner of the OS the wireless icon. When I click on it, it displays the SSID of my wireless. When I click on it, it ask me for my wireless password. It start to try to connect to my wireless router, but it always end up disconnecting.
View 3 Replies
ADVERTISEMENT
May 29, 2010
I use Banglalion WiMax usb dongle modem. I like to use it in ubuntu os. When I connect it to my Desktop PC's usb port, it respond nothing.
View 9 Replies
View Related
Mar 3, 2010
I want to buy a wireless dongle to establish a bridged connection in my home. I mean, does anyone have a wireless dongle which works perfectly for Karmic without ndiswrapper? Some of the information in the Ubuntu help page is outdated.
View 1 Replies
View Related
Sep 15, 2010
Cant install my wireless network with kubuntu...tried with cd bt cant work
View 1 Replies
View Related
Nov 19, 2010
I am using Ubuntu 10.10 desktop (latest updates) on an Acer Veriton 1000 desktop. I purchased a SMCWUSBS-N# Wireless USB Dongle recently and have been struggling to get it to work. NM-APPLET simply does not show any Wireless option at all. I have tried all the various posts / suggestions that I could Google and I am still nowhere.
Last night I manually loaded the RT3370sta driver. Now iwconfig does show the card on ra0. However, NM-APPLET still does not show any Wireless option at all.
Surprisingly "iwlist ra0 scan" command at the Terminal does show alll the available Wifi connections.
View 3 Replies
View Related
Dec 10, 2010
I'm trying my to get my 3-year-old Dynex wireless dongle to work in Ubuntu 10.04 (64-bit). Borrowing a similar linksys adapter from another computer running Ubuntu, I was able to install NDISGTK and transfer the same drivers that work in my 64-bit Windows 7 installation into my home folder.
Despite the fact that the dongle does not appear at all using lshw -C Network, ndiswrapper -l indicates that the driver is installed and the device is present. I think I found something interesting, though, when I tried this command:
Code:
jimmy@ubuntu:~$ dmesg | grep -e ndis -e wlan
[ 9.321323] ndiswrapper version 1.55 loaded (smp=yes, preempt=no)
[ 10.021542] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMIndicateReceiveNetBufferLists'
[ 10.021549] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisAllocateIoWorkItem'
[ 10.021554] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisFreeIoWorkItem'
[Code]...
View 4 Replies
View Related
Jan 18, 2011
I had previously been sharing my ethernet connection over wireless using Hostapd & dnsmasq on my headless server as this tutorial shows: here which had been working fine. I now wish to share my USB mobile broadband over the wireless. I using a ZTE MF112. I was able to get the connection working using the application wvdial.
- Firstly I had to create a hard link between /dev/gsmodem & /dev/modem
- wvdial then made a new connection ppp0 which would work for internet access.
Changing the interfaces to have the br0 port like so:
Code:
iface br0 inet static
address 192.168.1.1
network 192.168.1.0
netmask 255.255.255.0
broadcast 192.168.1.255
bridge-ports eth1 ppp0 wlan0
Flushing the IPTables & then adding:
Code:
iptables -A FORWARD -i br0 -s 192.168.1.0/255.255.255.0 -j ACCEPT
iptables -A FORWARD -i ppp0 -d 192.168.1.0/255.255.255.0 -j ACCEPT
iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE
Doing so works fine, but I'm not entirely sure how to make this all automated. I could try making a script to launch, but I don't have a huge amount of experience writing scripts. Is wvdial the best application to use? Keeping in mind I'm using a headless server. I use Squeezebox server & the scrobbling didn't seem to be able to connect to last.fm. Do I need to specify which connection Squeezebox uses?
View 2 Replies
View Related
Aug 11, 2011
I dont know if its possible or not ? I'm using 3G dongle (ppp0 interface) for connecting to internet on my laptop running ubuntu 11.04 , now i want to share this 3G connection to my wireless router(Trendnet TEW-652BRP) through eth0 interface in simple my connection should be like this
INTERNET<<<3G WIRELESS MODEM<<<LAPTOP----WIRED CONNECTION TO WIRELESS ROUTER<<<OTHER DEVICES (LIKE ANDROID MOBILE/LAPTOPS SHOULD CONNECT THROUGH THIS WI-FI CONNECTION)
View 9 Replies
View Related
Jun 28, 2011
I have a Acer Aspire running dual boot Ubuntu 9.10 and Vista. Although it has an Atheros wireless card (AR5001 according to linux, AR5007 according to Vista) until recently I didn't have any apparent problems with it.I installed a ZTE MF112 Mobile Broadband Dongle. Now I am experiencing great difficulty in communicating with my wireless router (with both LAN and WAN traffic). Connecting to the network in the first place appears to happen quite smoothly and my computer obtains a DHCP IP address. However the ping response times are measurable in seconds rather than the milliseconds I would expect, and any traffic across the network crawls, or just times out and fails.
I do not believe it is the router at fault as two laptops, both also with Ubuntu, can connect to it fine and swapping it out for another router does not fix the problem either. Also there is no problem connecting from Vista.I suspect that installing the dongle has altered something which has made the bugs in the wireless card/drivers apparent and that's where I need some help.
View 2 Replies
View Related
Oct 19, 2010
connecting 10.04 to the internet via dongle, the dongle in question is orange and I think is pay as you go. The computer a brand new laptop loads the 10.04 disc and the mobile connection is there but I do not know how to put it together.
View 2 Replies
View Related
Jan 19, 2011
I got this wireless usb dongle for work and cannot figure out how to get it working.
HSUPA USB STICK
MODEL: MF190
ZTE Corp
I am using ubuntu 10,04. on an acer extensa 5235 laptop I previously had a vodafone wireless dongle and was able to get that working using betavines software but I havent been able to find an equivalent for my current dongle. Unfortunately our company switched providers. My boss was trying to make me install windows to use this usb dongle...I said no way ,there has to be a way to get it working on ubuntu.
View 1 Replies
View Related
Feb 25, 2011
I just installed fedora 14 and i'm trying to connect using a movistar zte mf110 dongle. fedora recognizes the stick no problem, accepts the PIN, and finds the network with good reception. but when i try to connect it tries and tries with no result.
View 4 Replies
View Related
Oct 19, 2010
I'm trying to get my SMC EZ-Connect 802.11g 2862W-G wireless dongle to work on a friend's Lucid Lynx. I see there are some closed archived posts asking how to install this dongle, but since they don't appear to have been solved, here's a bump to see if I can resurrect the topic.
lsusb gives me Bus001 Device 003: ID 0707:ee06 Standard Microsystems Corp. EZ-Connect 802.11g on what I should do next?
View 9 Replies
View Related
Apr 1, 2010
I'm trying to get my new Wireless USB dongle to work with Xubuntu 9.10 Karmic Koala. I've extracted the .rar file that was on the drivers CD that came with the dongle. According to the ReadMe....
The Model Name is: RT2870 Wireless Lan Linux Driver Driver Name: rt2870.o/rt2870.ko Hardware: Ralink 802.1n Wireless LAN Card Description: This is a linux device driver for Ralink RT2870 USB ABGN WLAN Card. My issues:
1. I do not see the driver file anywhere in the folder contents... I suppose that I have to "build" it.
2. In the makefile the chipset is default set to "CHIPSET = 3070" & the folder that holds all the extracted files is named 2008_1128_RT3070_Linux_STA_v2.0.1.0 so I'm confused as to whether this dongle has a 2870 or 3070 chipset inside. Does it matter?
3. Sorry, I'm a bit of a n00bster when it comes to all this, but I'm having some problems with the build instructions. It reads:
[Code]...
View 9 Replies
View Related
Jan 1, 2011
I have internet access through 3G/4G USB dongle direct into my Ubuntu 10.04 box. Works great! Now I would like to share this connection out through my Netgear WGR614 wireless (and wired) router. Any clues? I've tried the simple (GUI) instructions using Network Manager, but just can't seem to get it right. Previously, I had DSL and this plugged nicely into the WGR614 and internet and ethernet access was had by all. Now, I'm a bit confused on how to get the sharing (ethernet and wireless) between my Ubuntu box and the wired/wireless network while at the same time getting Internet access to all through the Ubuntu box.
View 2 Replies
View Related
Apr 27, 2010
I recently bought a D-Link DIR-655 router capable of 802.11n operation, upgrading from a DIR-624 router only capable of 802.11g operation. While my overall setup uses wired connections, other people in the house prefer wireless, and the upgrade was undertaken more for a hoped for increase in wireless range, rather than the possibility of increased speed, since the router is located to accommodate the wired connections. However, to test the 802.11n operation I bought a D-Link DWA-130 USB dongle for my now 5-year old laptop, which comes with an otherwise satisfactory 100Mbs ethernet port(eth1) and an 802.11g wireless card(eth0). By checking the dmesg | grep firmware output after I plugged in the dongle I determined that the necessary firmware was rtl8192sfw.bin, which I found on the web, and downloaded into the directory /lib/RTL8192SU.
A subsequent reboot and then YaST > Network Devices > Network Settings showed the device as wlan0, but not configured. I changed the Network Setup Method to ifup (since I can see no way to do a device configuration in Network Manager), and configured the device, and at the same time deleted the configuration for the existing 802.11g wireless card(eth0). I then rebooted, went back into YaST to confirm the wlan0 device was configured and the 802.11g device (eth0) was not, changed the Network Setup Method back to Network Manager, rebooted again. Making sure that the router was set to only transmit/receive using 802.11n I then typed iwlist scan. To my surprise, the output showed first that the supposedly unconfigured eth0 device seemed to be still active, for it found my home network, and claimed that the protocol used was 802.11g. On the other hand, the newly configured wlan0 device produced the message: "Interface doesn't support scanning: Network is down".
First, should I expect iwlist scan to work for a device that shows as unconfigured? And even if it should work, shouldn't it show 802.11n as the protocol, assuming that the router is in fact telling the truth? Is there any independent means to determine if the router is only using 802.11n as it claims? Second, the overall goal is to make the wireless network in the house 802,11n only, and since the dongle is backward compatible with 802.11g, I would expect to permanently unconfigure the eth0 device and use the dongle, both here and on the road. I do not need two wireless connections on my laptopThe laptop is running SuSE 11.2 as of about a month ago. Some relevant(I hope) command line output:siracusa:~ # uname -aLinux siracusa 2.6.31.12-0.2-desktop #1 SMP PREEMPT 2010-03-16 21:25:39 +0100 i686 i686 i386 GNU/LinuxUSB Information
siracusa:~ # lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 2001:3301 D-Link Corp. [hex]
[code]....
View 9 Replies
View Related
Mar 4, 2010
Installed Ubuntu 9.1 - Linksys WUSB600 connects but no network access. I get "server not found", so no data being xmtted. It worked fine in ver 9.04 but not in 9.1
View 1 Replies
View Related
Mar 28, 2010
I recently installed the latest version of Kubuntu in a dual boot system with Windows XP on a Dell laptop. The dell laptop has a broadcom wireless device, and I was able to set up the driver and get wireless working. Then I booted into windows XP to make a whole bunch of updates/driver installations, and when I booted back into Kubuntu it would not connect to the wireless network. I am pretty sure the device is still active, because it picks up on the wireless networks in the area. But KWallet does not open to ask for my password on booting. Something is not set right, but I can't tell what.
View 1 Replies
View Related
May 14, 2009
I have a Laptop running Fedora Core 10 (64 bit). I recently have fallen in love with window managers (openbox to be precise); the Problem is, when in these window managers, I cannot connect to wireless APs. I've tried restarting the network manager, but alas it has no effect. So, I'm left with terminal commands (YAY!!! I love any chance to use those.) so is there a command that I need to use to connect manually?
View 6 Replies
View Related
Nov 12, 2009
I have a wireless USB (TP-Link TL-WN620G) adapter on F10( 2.6.27.38-170.2.113.fc10.i686). I have installed the drivers and it is detecting my router. But it keeps asking for network password with repeating a dialogue box although I entered correct password. I have configured the wireless configuration using NetworkManager.
View 6 Replies
View Related
May 5, 2010
When fedora initially starts up, the network manager shows all the available wireless connections available to me. However, when I select my wireless connection, it will go through the loading process where it shows the two green dots and the circular moving blue streak, then it prompts me to put in the wpa password.
This is where the trouble starts...when i input my wpa password, it will proceed to attempt to connect to my network but it never succeeds in doing so--it will keep on asking me to input my wpa password. when i finally get sick of doing it over and over again, i just hit cancel instead of retrying to connect.
After i stop trying to connect, the network manager no longer shows all the available wireless networks--the list is completely empty, and i can find no way to get the list to show up again, with the exception of restarting my computer.
I am able to connect to the internet with a wired ethernet, but id like my wireless to work.
View 3 Replies
View Related
Oct 31, 2010
I find it interesting that the only CLnetwork manager is nmcli(). Are there others you know and love?
I have been trying to use nmcli(), and I am having some difficulty.
When I run...
Code:
I get a great list of available wireless connections, but it seems to me I am not getting the 'right' information, or I do not know how to implement the information I am getting.
When I try to connect using the
Code:
It tells me, 'Unkown connection'.
So I wonder in the devices list is the SSID, in the single quotes, not the id the 'up' command requires? Or how do use the SSID? As far as the UUID, this option works for me, but I can only see the UUID if I had already once before connected to this connection. Is there any way to see the UUID of a new connection?
View 3 Replies
View Related
Apr 1, 2010
in short : installed 9.10 on a dell inspiron 600m which has a broadcom bcm4401 ethernet and an intel PRO/Wireless LAN 2100 3B mini PCI. At this point, i'm not too picky about which one works (meaning neither of them currently work). nm-tool seems to pick up on both : the broadcom (eth0) is using the b44 driver, State is unavailable; the intel (eth1) is using the ipw2100 driver, it's State is disconnected.
i have encryption turned off, and the wireless sees a number of AP's (including mine).
i'm jumping off the good ship m$ and determined to make this work!
View 3 Replies
View Related
Apr 7, 2010
My Wireless worked once on Ubuntu but when I disconnected it i got stuck with connection trys that never succeed. On the two little lights only one is green, and when Ubuntu offers to have another try the password is not the same as the one I typed before (and of course is not the good one)
View 2 Replies
View Related
May 18, 2010
I am new to Linux and just put Ubuntu on my pc when i am using Ubuntu my wireless keeps connecting and disconnecting. Im not sure what I am suppose to do.
My laptop is a Sony Vaio NW130J
The wireless card/driver is Intel WiFi link 5100 AGN
I dont know anything about Linux so if you could please explain it as easy as possible.
View 1 Replies
View Related
Jun 1, 2010
just installed Ubuntu Netbook Remix on my new HP Mini 210 (info). Everything is working fine -- webcam, shortcut keys etc, but I'm having some difficulties connecting to our wireless network. When I click on the network panel item, there are no networks visible. Now, I also have Windows 7 Starter on the netbook (what I'm using right now) and that's able to connect to the network fine.
View 2 Replies
View Related
Jun 21, 2010
I have a computer running Ubuntu, and a MacBook Pro. I need to buy a decently cheap wireless router that I can hook up to my Ubuntu so that it will send wifi signals and I can use the wifi to go online with my MacBook Pro. I was about to get one today, but remembered how Ubuntu is picky about working with things like that. I'm only going to be using it to get signals around the house which isn't that big at all.
So what would be the cheapest and decently efficient wireless routers that I can use which Ubuntu will cooperate with?
View 2 Replies
View Related
Jan 3, 2011
I always have been a windows user and my brother decided to install Ubuntu 10.10 on my laptop, before he completed the full installation so I could use my wireless card. I have been reading various posts for the last two days and i am none the wiser. I have a linksys wireless G notebook WPC54G Ver.5. I have the software (drivers) for the card saved on my machine and have also installed NDISWrapper?
View 3 Replies
View Related
Feb 15, 2011
I just bought a new laptop. This one came with win7 home. The wireless works perfect. Today I installed ubuntu 10.4 next to windows. I made a first connection which went easy. But after 30 seconds it disconnects. Then it tries 30 seconds to reconnect. It reconnects and after 30 secodns or so, it disconnects again. It keeps doing this all the time on ubuntu while on windows it works without any problems. This is what sais under the device manager for my wirelesscard stuff:
Intel(R) WiFi 1000 BGN
Microsoft Virtual WiFi Miniport Adapter #2
Microsoft Virtual WiFi Miniport Adapter
Realtek PCIe GBE Family Controller
[Code]...
View 1 Replies
View Related
Feb 16, 2011
i have a Levano S10e intel atom preccessor and the net-book is not connecting wirelessly to the network. i have tried at two locations and even plugged in a exterlal wifi adapter. it wouldnt connect then either, the only way to get connected is to use a cat5 cable. here is the ifconfig output with no cat5 inserted and it not connecting to the internet.:
[Code]....
View 8 Replies
View Related
