Ubuntu Networking :: Connecting To Encrypted WEP Wireless Network?
Sep 11, 2010
I am unable to connect to my home wireless network when WEP 128 bit encryption (open system passphrase) is turned on however I can connect when I disable the encryption?
Code:
1- Compaq nx6110 running Ubuntu 10.04 LTS Lucid Lynx
2- lspci
02:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
3a- ifconfig
lo no wireless extensions.
eth0 no wireless extensions.
eth1 unassociated ESSID:"101"
[code]....
View 1 Replies
ADVERTISEMENT
Oct 6, 2010
I would share my long awaited success with connecting my ubuntu laptop up to my universities (University of Western Sydney) wireless network. The rumors appeared true and they have finally implemented 802.11x authentication instead of that horrible java app netdirect. I am sure you've been cursing at its erratic stability. There is no linux documentation for airUWS-Lite nor anything more imformative than there windows/mac point and click steps found at [URL]. However with a few simple clicks you can have stable working connection.
When connecting make sure you have theses settings.
Security: WPA & WPA2 Enterprise
Authentication: Protected EAP (PEAP)
#This is the settings that does not present itself correctly
Anonymous Identity: leave blank
PEAP Version: Automatic
Inner Authentication: MSCHAPv2
Username: <YOUR 8 DIGIT STUDENT NUMBER>
Password: your regular password
View 1 Replies
View Related
Aug 7, 2011
I have a fairly new install of 10.04 on a Dell laptop (about a week). Everything was running well, connecting wirelessly to the interneet through my home router (WPA/WPA2). Today, for some reason, I lost my connection to the internet. The network manager tells me I'm connected to my router, but all the lines on the wifi indicator are gray and there is no internet access. I reinstalled the 2 sets of packets for my BCN4312 (bcmwl-kernel-source and b43-fwcutter ), but no change.
View 4 Replies
View Related
Oct 26, 2010
I noticed that it takes a couple more seconds before Ubuntu connects to my wireless network when it wakes up from sleep. I didn't have this annoyance when I was using 10.04, and only appeared when I upgraded to 10.10. It takes about 5-7 seconds before it indicates that it's connecting. When I was using 10.04, it only took a maximum of 2 seconds for it to indicate that it's in the process of connecting to my network.
View 1 Replies
View Related
May 19, 2011
i just installed Ubuntu 11.04 64bit on my desktop. i have a TP Link TL-WN321G (Ver 4.0) wireless usb adapter to connect to my wireless network (i used to use it with Windows XP).As expected (i'd read up a bit before installing Ubuntu), the adapter was autodetected - i could see my wireless network listed in the networks list dropdown, and lsusb showed it too.lsusb identifies "Bus 002 Device 002: ID 148f:2070 Ralink Technology, Corp. RT2070 Wireless Adapter"But i cannot connect to the network. When i select my network, it keeps trying to connect, but never succeeds in connecting.
i tried going through the forums for possible solutions, but most of them deal with how to get it working when the adapter is not detected, or when networks are not shown. Or they are for older Ubuntu versions.i use the same wireless network on my laptop (Ubuntu 9.04), and it has a WPA & WPA2 Personal security, with a password, which i've configured in the desktop as well.
View 1 Replies
View Related
Jul 9, 2011
I have a wireless router, but my desktop computer is connecting to it, or maybe to the modem, by an Ethernet cable. It has a built-in wireless card, so just as an experiment, I tried to connect to my network wirelessly. It didn't work. And not only did I not get any internet connection, I can't get any internet through the wired connection either. The internet works fine with Windows Vista (I'm dual-booting), as well as when I boot up Backtrack off of a Live DVD. I can still access my router's config page by going to 192.168.2.1 on a web browser, but I can't access anything else.
View 1 Replies
View Related
Sep 1, 2011
In setting up wireless connections I have ran into an array of problems. First, when I installed the new OS on my laptop I had to get the correct drivers and firmware for it to display and connect to any connections, had no problem here connecting to a secure wireless network (WPA or WPA2). I then installed Ubuntu on my desktop and had to find the correct driver for the Netgear WNDA3100v2 USB adapter, got it all installed with the Windows Wireless Drivers tool or w/e it is. This made all the available connections come up. I tried connecting with the WPA password I was given for the network and will not connect.
I had the guy managing the network change the one I connect to, to a WEP Passphrase Shared Key thinking this would solve my issue, still nothing. And also in doing so, now my laptop will not connect to the wireless network using the Passphrase. I do not want to go back to Windows, and I will be getting rid of my Lan connection soon so i need a solution to fix this wireless connection problem.
View 9 Replies
View Related
Apr 5, 2009
I recently downloaded and installed CentOS 5.3 DVD media.The media check passed. I proceed to install the operating system sucessfully. After installation, all my hardware is recognized, when compared to CentOS 5.2. Anyway, when I attempt to connect to my wireless network that uses either WEP/WPA/WPA2-- I get an error message that I cannot recall (it basically only came up when I entered the key) However, I can connect to my wireless network when it is unencrypted and no open/shared key is needed.I would like to be able to connect to my wireless network when
FYI: I am using a RealTek RTL8185 Wireless Driver.Also, I use CentOS as a workstation.
View 4 Replies
View Related
Sep 5, 2011
I'm having problems with my wireless card. The network manager won't allow me to turn it on. It is working in windows and in ubuntu, but I can't get it to turn on under fedora. I'm using a Lenovo B570 laptop and it uses the Centrino Wireless-N 1000 for wireless.
View 5 Replies
View Related
Jan 8, 2010
I am trying to do a command line installation.Finished the installation and my wireless card wasnt working.Did a "sudo ifconfig wlan0 up" and got it working.But for some reason wireless-tools is not installed thus I dont have iwconfig, iwlist, etc.The wireless works and connects fine off a liveUSB.So I am going to give info from this liveUSB run and maybe someone can suggest how I can set the right settings on the Command Line Installation I presume in the etc/network/interfaces.
View 1 Replies
View Related
Jan 24, 2011
I'm having some trouble connecting to the wireless network here at home. The PC has a Linksys WMP600N wireless network card, which works fine under several versions of Windows. In Opensuse however, I cannot get it to find the network. Even though my laptop is right next to it, which has perfect connection to the network. The router is a Linksys WRT610N.
I've tried running iwconfig and iwlist scan in the terminal, but the scan returns no results and iwconfig indicates it does not have a connection to a network. I've turned off IPv6 as I read this can sometimes cause issues. I've also tried issuing the computer a static IP address, figuring the DHCP might be causing problems, but all to no avail.
View 9 Replies
View Related
Aug 21, 2011
since a few weeks I have a problem connecting to other hosts when I'm using another wireless network, which has a different DNS IP than I have in my network. I have to change /etc/resolv.conf to change the nameserver. Can NetworkManager control the nameserver? If yes, how?
View 3 Replies
View Related
Jun 7, 2010
I recently swapped from ubuntu to slackware. It's all functioning, minus the wireless network. Decided to forgo my usual fluxbox desktop for the features in KDE until I get ready to swap back (not sure what programs I'll have to add to startup in flux yet). I'm using a toshiba satellite L305-S5957 with a Realtek 802.11b/g wireless-LAN adapter. Not sure if it's a hardware problem or if I just don't know how to connect with kde.
View 14 Replies
View Related
Apr 7, 2011
I am having some trouble getting my computer to connect to my wireless network. There is a wireless icon in the system tray. When I click on the icon I get a list of SSIDs associated with available wireless networks. To connect to one of of those networks I move the cursor over the SSID, the SSID is then highlighted, I select the highlighted SSID, then my computer connects to the selected network.
Sometimes the SSID associated wth my wireless network does not show up on the list. Sometimes it does. Normally the SSIDs on the list are in bold lettering. When the SSID of my network does appear it is in shaded lettering. When I move the cursor over the SSID it is not highlighted and I cannot select it. So you see it is not possible for me to select the SSID of my network and connect to my network.
The computer I am running is a ThinkPad R40. This is the wireless controller on the computer. I got this with "lspci". 02:02.0 Network controller: AIRONET Wireless Communications Cisco Aironet Wireless 802.11b
View 1 Replies
View Related
Aug 9, 2011
I have installed Suse 11.4 from the Gnome liveCD, and I "can" access my home network when it is unsecured, however, I can't access it when WEP is turned on. Now, I know that WEP is insecure but there are devices on the network that only supports WEP so the router settings can't be changed. Also just for testing purposes i have tried the WPA2 encryption method to no avail (dmesg reports that the connection timed out). The only encryption method that looks promising is the open-wep encryption. When trying to connect to the network (with open-wep turned on) I have performed a bit of checking to see what is going on, now I don't know much about in-depth linux and stuff but, below are the outputs from lsusb, dmesg, iwconfig, and ifconfig.
lsusb
Code:
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 077b:2219 Linksys WUSB11 V2.6 802.11b Adapter
dmesg
[Code]....
View 9 Replies
View Related
May 11, 2011
I am having trouble getting my wireless card to connect to my network. I believe I have done everything correctly. Here is my wpa_supplicant.conf file:
Code:
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
eapol_version=1
ap_scan=1
[Code]....
I have never connected to a wpa network using slackware before, so I am not entirely sure how to use wpa_supplicant. I have altered the conf file, then tried dhcpcd and it times out.
View 7 Replies
View Related
Mar 19, 2010
how to connect my laptop with centos5.3 to connect to a wireless network.
View 2 Replies
View Related
Feb 26, 2011
I just bought a new USB wireless adapter for my openSUSE 11.3 laptop, a TP-Link TP-WN727N. I can't get the new card to connect to my home wireless network, which is named WRT320N in the screenshot. KDE prompts for the key repeatedly but never connects successfully. Part of the problem might stem from the fact that this laptop now has 2 wireless cards: one build into chipset (PRO/Wireless 3945ABG) and the new USB card. Both show up in knetworkmanager but no clear distinction is made between them visually. Strangely my wireless network shows up twice in knetworkmanager as in the screenshot. Once per wireless card? As my wireless network is N-only I don't see why it would do this.
View 9 Replies
View Related
Apr 9, 2011
Just moved over to openSUSE 11.4 (KDE) from Ubuntu, yesterday. However, I'm having some trouble with my wireless connection.
I have a wireless network with a hidden SSID and WPA2-PSK security. I entered all the nescery information into the KDE network manager, but it couldn't find my network. So I ran the usual command:
Code:
su -c iwlist wlan0 scanning essid [My SSID]
At which point, the network manager immediately found, and connected to, the network. However, it seems that I have to run this command (as root) each time I log in, before my laptop will connect to the network. The network manager has no problem find the plethora of unsecured networks as well as those that are secure, but broadcast their SSID.
View 1 Replies
View Related
Apr 15, 2010
I seem to be have issues periodically connecting to wireless networks with WPA. It'll work one minute, and then I switch my macbook back on after a period and it refuses to connect again. It's happened on and off on three different networks now.
An example of /var/log/syslog:
Code:
Apr 15 17:57:27 macbookpro NetworkManager: <info> Activation (eth1/wireless): association took too long.
Apr 15 17:57:27 macbookpro NetworkManager: <info> (eth1): device state change: 5 -> 6 (reason 0)
Apr 15 17:57:27 macbookpro NetworkManager: <info> Activation (eth1/wireless): asking for new secrets .....
Apr 15 17:58:27 macbookpro NetworkManager: <info> (eth1): deactivating device (reason: 0).
Apr 15 17:58:27 macbookpro NetworkManager: <info> Policy set 'Auto eth0' (eth0) as default for routing and DNS.
Apr 15 17:58:29 macbookpro wpa_supplicant[949]: WPA: No SSID info found (msg 1 of 4).
Apr 15 17:58:29 macbookpro wpa_supplicant[949]: No network configuration found for the current AP
Apr 15 17:58:29 macbookpro wpa_supplicant[949]: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
View 3 Replies
View Related
Apr 22, 2010
I've spent 29 hours trying to figure this out. And I'm about to blow my brains out. Fresh install 11.2. - 64bit but tried 32 bit and same thing. Dell studio 1734. Broadcom wireless and wired. Installed broadcom drivers (b43) through yast. Wired eth0 works. Wireless eth1 works. Surf with Firefox fine. BUT. Kmail will not connect through wireless. Nor can I access repositories through wireless.
Tried blacklisting B43 in ssb no change. What in the hell is going on? I've searched forum after forum and tried everything and CANNOT make this happen.
View 9 Replies
View Related
Mar 3, 2011
im having problems installing TP-Link TL-WN851N on suse 11.3, no internet activity at all
View 4 Replies
View Related
Nov 4, 2009
I run Ubuntu, and it has a nice GUI widget thing that connects me to my home wireless network when I boot. I don't have a problem with that. But suppose I don't start X, and boot to a recovery console for some reason, like I did recently when my graphics were broken after installing Karmic. In that case, my computer won't be connected to the wireless network until I log into X normally. So I can't apt-get anything or anything. It's very annoying. And I don't know how to connect to my wireless network.
I know my wireless network SSID, and I know my WEP key or WPA passphrase. How can I log onto the network with commandline tools? Is there some basic program that I can just run "networkmanager <myssid> <mywepkey>"? I looked at the iwconfig man page and I honestly couldn't figure out how to simply connect to my network. Once I figure out how to connect to the network with command-line tools, where can I put an "autoconnect" script so that it will connect during startup, like it should anyway?
What I don't understand is, why the Ubuntu network manager nm-applet, doesn't just work as a front-end for more basic networking stuff. I don't see any reason why it should require you to start X before working; it could be a daemon that runs at startup, and there could be a config-file somewhere, but it doesn't even start running until I log onto gnome.
View 16 Replies
View Related
Dec 5, 2010
I'm using three different UNIX OS's.I have used gnome on my laptop for most of the time I have had it and I decided it was time for a change in GUI,I am wanting to use KDE but I can't get it to work with my laptop I have tried mandriva 2010.1 spring and that one was slow and it kept dropping my wireless connection.So I got rid of that in tried Kubuntu and now it will not use the wireless.Ubuntu and Ubuntu SE and the live version of super gamer can all connect it's just Kubuntu and mandriva
View 2 Replies
View Related
Jun 17, 2010
I am regular user of windows, but one week ago I installed ubuntu, it was very cool and then I installed opensuse yesterday because I like its kde desktop. But i have problem with wireless, i can see my home wifi, but it doesnt connect. I have same problem in ubuntu, but it was solved when i change passphrase to 40/128 bt from 128 bt, but in opensuse, all i can see is 128 bt or 64/128 ascii. Also I m unable to play mp3 songs in opensuse.
View 5 Replies
View Related
Sep 20, 2010
Currently my office use a Cisco Firewall which will only allow the ANYCONNECT utility to do the vpn connection. I found a Linux utility (OpenConnect) which will do the same thing, but allow me more flexibility with my networking needs.What I ultimately would like to have is to have a switch that I can connect any network device into it and be connected to the office. IE (my IP Work Phone and Computer) Currently I have is a computer with fedora 13 and two network cards eth0 (home network - connected to a router) and eth1 which I would like to connect a switch to. OpenConnect communicates fine and I can see the work network from the Fedora machine. It creates a vpn0 tun/tap device and I don't know how to pass communication to/from the eth1 device.
Do I try to iptables the ports for the phone and services I need on the computer? Or do I build bridge; and If I do what am I bridging. I have tried making a bridge from eth1 to vpn0 which reply's with unsupported device or something like that.Unfortunately my network skills are bit limited and my office says "it can't be done". Their solution is for me to buy a ASA5505 (or something device) and have a static IP. I would have to make it work as my router and even then it will only DHCP 10 ip addresses; which will cause a shortage of IP addresses in the house.
View 1 Replies
View Related
Jan 26, 2010
With Encrypted Wireless Connection Not Able to Access Internet - no pings, internet browsing, etc. However, without encryption I am able to browse the internet. I need encryption ..
I am pasting diagnostics collected by shell procedure collectNWdata.sh..
Code:
collectNWData.sh V0.6.2.0 (Rev: 1.193, Build: 2010/01/20 21:22:30 UTC)
--- Which type of your network connection should be tested?
--- (2) Wireless connection (WLAN)
--- What's the type of networktopology?
[Code].....
View 8 Replies
View Related
Mar 30, 2011
I am currently using Debian Testing, managing my wireless connection with NetworkManager and the Gnome nm-applet. Both have just been updated: network-manager from 0.8.1-6+squeeze1 to 0.8.2-6 and network-manager-gnome from 0.8.1-2 to 0.8.2-4.On installation of the new packages, I have no problems. However, on a reboot, I can no-longer connect to any wireless connection. I am not prompted on start-up for the password to unlock the Gnome keyring and when I left-click on the nm-applet icon and then click on a network to connect to it, nothing happens.I do not think this is a driver or NetworkManager daemon problem. If I run "nmcli dev wifi" or left-click on the applet icon, NetworkManager seems to scan for wireless networks properly and returns a list including the one I wish to connect to.
View 9 Replies
View Related
Jan 22, 2011
I've just installed openSUSE 11.3 for the first time on a Dell E1505 notebook and am having problems connecting to my home wireless network. Using the Network Manager I've been able to find my home network and connect after entering the network password. After a minute or two the wireless network is still shown as active but their is no connection (websites will not load).
I'm completely new to Linux so I have almost no clue what could be causing this. I have tried connecting the notebook hardwired (Ethernet) to the router and get a perfect connection if that information helps any.
View 3 Replies
View Related
Nov 10, 2010
I have a frustrating wireless networking problem trying to connect to cafe wireless networks using a BCM4318 under Ubuntu 10.04 (Lucid.) I don't have a wireless connection/router of my own to test with, which makes this problem difficult to troubleshoot. I'm using Ubuntu 10.04 and it's fairly new/default. I think that means I'm using Network Manager for networking because I think that's what comes out of the box, right?
I click the little wireless icon in Gnome's top bar and I see a list of networks, some of which have locks next to them. When I click on a name without a lock, I usually connect just fine (unencrypted network.) But since installing 10.04, I have not been able to connect to any networks that are encrypted. When I click on those, a dialog box pops up that says "Wireless Security" and points to a dropdown with only one option: "WPA & WPA2 Personal," followed by a field for the password. Is it defaulting to WPA & WPA Personal because of Network Manager settings or is it detecting WPA & WPA2 Personal in the network?
So sometimes I try to set the connection up manually in Network Manager, using a different securit method (ie - WEP, etc.), hoping that that will help. So far I have not found the right combination on any of the networks I've used. (And I tried dozens today.)
Unfortunately, this upgrade corresponded to a geographic move so I cannot confirm whether I can connect to networks that I used to be able to connect to, now that I've upgraded to 10.04. So I can't say whether the problem is that I upgraded or whether it has to do with these new networks using WPA (whereas maybe the old ones in my old town were using WEP?) or whether it's something else.
[Code]...
I will be happy to provide any other information that you think you might be able to use to help me debug this. I'm hoping this is a known problem either with my wireless card or with 10.04 or with Network Manager and that it has a known solution.
View 2 Replies
View Related
