I recently set up a network of computers via Ethernet, all of which use Fedora 10. I would like to be able to get any computer on the network to hook up to the internet.(I think the solution is now figured out - see below, on page 2, "problem solved")
View 14 Replies
I'm trying to get internet to my old server through a laptop. The laptop is running ubuntu 10.10 and the tower is running ubuntu server 10.10 X86.
View 1 Replies View RelatedI am having a problem with my internet connection. It only works half the time. Usually when i start the computer it doesn't connect until i restart anywhere from 1 - 10 times. I did sudo ifconfig while it was not working here is the output:
eth0 Link encap:Ethernet HWaddr 00:19:d1:00:36:41
inet6 addr: fe80::219:d1ff:fe00:3641/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:11 errors:0 dropped:0 overruns:0 frame:0
[Code]...
I have just installed ubuntu 7.10 on my computer. The problem is getting it connected to the internet using my Sony Ericsson w580i as a modem. I have used my phone to connect to the internet on XP operating system easily. Please assist me and try to give me a more simplified step by step procedure.
View 9 Replies View RelatedI'm using ADSL modem (not router) and I can't connect to internet. The network manager and the pppoe-setup command doesn't work. So I'm asking some of the experienced users of fedora 12 to help me setup my connection.
Details: ADSL modem with pppoe connection (working fine on win xp)
How can I connect laptop to internet using GPRS enabled Phone?
Phone is Nokia 6600 slide. And laptop(Dell) has F10 installed.
This problem started a few days ago. Whenever I attempt to connect to a wireless connection via network manager, my computer completely crashes, going to a black screen with no input from keyboard or mouse. It forces me to reboot using the power switch. Everything works fine when I connect to an ethernet cable, so I am sure it's a problem with my wireless driver.
I already tried (successfully) reinstalling the ath9k driver via compat wireless as was the advice from other forums, but this had no effect. I'm currently running opensuse 11.4, and haven't had this problem until a few days ago
This problem seems a bit ridiculous for a task as simple as connecting to a wireless network, so I'm convinced that either there is some sort of relatively simple way of fixing it, or windows really is the only decent operating system out there..
I just installed Ubuntu 9.10 and its great. However when I connect to the internet at home it shows that the connection has been established but I still cant connect to the internet. My flatmates are all able to connect. However, I am able to connect from work both wirelessly and through an ethernet cable.
View 2 Replies View RelatedI just want to use Internet Connection Sharing (ICS) to connect to the internet. I have done a massive amount of troubleshooting, but some of it seems to contradict itself, and the only two things that I know for sure are that it used to work, and that my Ethernet cable is not the problem. When I use Terminal utilities like ifup and dhclient it seems that it can not determine IP information, but when I try to put it in manually, the "Apply" button grays out right after I finish typing it in. When I try to connect normally, in KDE or GNOME, the icon acts like it's connecting, then instead of having the connected icon, I receive a notification that "the network has been disconnected", and it goes back to the disconnected icon.
Oh, and by the way, I know that I could probably find a workaround, but I have limited resources, and this used to work. The Linux is a Dell desktop with Fedora 12 and the Windows is a Windows 7 HP laptop.EDIT: I hope that I didn't mess something up, but I accidentally used system-network-config to try putting in the IP address there, and ended up changing it back to the original settings, but the computer is now calling it Auto Ethernet in the taskbar icon, although sudo iwconfig in the terminal still calls it eth0.
I am trying to connect my desktop to the internet via my Linksys wireless usb WUSB11v2.8 adapter. My network showed up in the Network manager as soon as I installed Fedora and it asked for my network key, but it still doesn't connect. It just keeps asking.I was reading that possibly the driver is not compatible with the OS. I heard about RPMs and the ndiswrapper program that supposedly is supposed to help with compatibility issues so I went and installed both via a direct ethernet connection.
I guess my question is now since I have these programs, what else do I need and how do I go about completing the installation? I pretty much need to be baby stepped by step into how to do this including the best place to install the software, what files do I need, and where and how if I even need to get my device's chipset.
I recently installed F13 on my Toshiba Satellite C650. It has a buggy ACPI which no linux distro till date supports. I got that covered though. But my problem is that the ethernet port works only if the kernel is >=2.34. But F13 came with 2.33.
I do not have an access to a wireless network. Please tell me how to update the kernel without connecting to internet directly. I am new to Fedora. I have been using Ubuntu for some time and this can be achived in ubuntu by downloading the DEB packages and dependencies.
I have so many _wired_ devices that I can't get by with just 4 eth cable outlets anymore, so I thought I'd hook up an older router that I don't use as a way to get extra places to plug devices into.
Now it looks like:
Internet
then cable modem
then router1/wifi + (1 eth NAT storage)
then router2 + 4 eth0 computers:
(legacy FC5 box)
(legacy F11 box)
(updated F13 box)
(windoze)
All of the computers EXCEPT the FC5 box are fine (my def of "fine" is I can ssh to and from the other computers and to outside computers, and browse the web).
The FC5 box, however, can ssh to and from computers inside the network just fine, but can't get any kind of web browsing. Nor can it ping to the outside. I get a "Network is unreachable" error. I'm not using a proxy, not knowingly, and my firewall settings haven't changed...it certainly hasn't been blocking port 80 before.
what's the best way to go about adding more ethernet when you need about 7 cables. I'm not really excited to buy a router with 8 ports or anything like that, especially when this seems to _almost_ be working just fine.
I have 2 computers in my house, on my network. I want to connect to one computer to the other using SSH. On one I installed "OpenSSH-server". "OpenSSH-client" was already installed. I go to the other computer to try to connect to the "server" computer and I enter in the terminal:
Code:
ssh username@192.168.0.33
It never connects. The text input "bar" keeps blinking, it never connects and I get the "Connection timed out" message.
how I can connect to the "server" computer? What am I doing wrong? And if I edit my "/etc/ssh/sshd_config" file to listen to port "12345" how do I get the other machine to connect to that port?
I have Ubuntu server installed on my old machine, which has no avahi running. I want to be able to connect to it by hostname. Is it possible. I have a tp-link TL-WR941ND router, but it doesn't seem to have any related options. How can I do it? Is there another way?I know I can add them on by one to the host file, but that is not what I want. Also that wouldn't work well with DHCP, and new hosts.
View 3 Replies View Relatedi would like to connect from my home pc to my local machine at the university (fedora 12) behind a main university server(linux) through vnc. specifically,to connect normally through ssh/X to my local pc i have to ssh first to the main university server and then ssh to my local pc. Namelly:
ssh -Y -l loginname main.server.name
and then
ssh -Y my.local.machine.
On my local machine there is a vnc server running that I would like to access it from home (linux machine). Actually linux is running everywhere.
I am trying to connect to an apple computer wirelessly to get access to the internet.. If no encryption is used on the network (gateway?) set up by the apple computer I can connect just fine and browse the internet.
-If a WEP encryption is introduced I cannot seem to connect... even though the WEP keys are identical.
-I have tried both WEP 128 passphrase and WEP 40/128 key... -Have tried the WEP passphrase being both just numbers in case that mattered.
I would like to connect a PC (it has no white IP) through Internet. It's possible to create tunnel with SSH, but I need more easy way. May be there is some service exists (like TeamViewer), so people can just run simple command on that PC?
View 3 Replies View RelatedAm not able to browse on Linux 5.please provide me step by step procedure to config internet on my Linux 5
View 3 Replies View RelatedI'm running Ubuntu 9.10 Live CD and I can't connect to the internet. I click on System --> Preferences --> Network connections and under the tab DSL I click Add. After i fill the information I click to connect to the new connection and after a while it shows me a baloon which says "Wired network: Disconnected - you are now offline".
View 1 Replies View RelatedI am trying to connect to Internet using Wavecome modem with Airtel GPRS connection. I am able to successfully connect and browse the Internet using wvdial. But if I use pppd, I am getting the error message as "LCP Terminated by peer".
The exact error I am getting is pasted below.
[root@pscu1320 ppp]# pppd call gprs-wavecom
GPRS modem init: press <ctrl>-C to disconnect
Wakeup Modem
[Code].....
I had an ubuntu 10.4 box, I used it mainly for programming, virtualization & other stuff. I've installed this box about 1 month ago, working on it everyday. About 2 days ago problem appeared when I just opened up firefox for cheking my E-Mail. I typed : [URL]. & nothing appeared & I just seen the famous firefox page when a networking problem is around . I just wondered and checked the connectivity & the wire itself, but find no problem around them, while playing with firefox I just had a turned on virtualBox machine (Windows XP service Pack 3), I just checked the internet within vm & working fine, I checked my e-mail from vm (windows xp), I thought restarting the system might help to solve the problem but damn, problem didn't solved & still arounds Well, I searched through websites dedicated to linux networking & forums that might help, I did anything that faced to my brain , follow another people recipes but problem did't solved for about 3 days ! Playing with primary & alternative dns didn't help, I did my best about solving the problem, disabling ipv6 from both linux networking settings & firefox itself didn't help also . After that, I thought reinstalling the linux might help to solving the problem, but install a new version of ubuntu, 10.10, I tried it, install it but the holyshit problem still arounds ! I think this might be a bug on ubuntu distro, I tried Mint 10 & the same problem, reinstalling x64 version of fedora core & the same problem .It's interesting that the same settings for TD-8101G TP-Link working fine for my Windows XP, Windows 7 x64 & the problem is arounds just for my linux distros .As I said I checked the internet for the problem & found nothing workable for me. I thought it's better to describe the problem & maybe another people faced with that problem .
View 9 Replies View RelatedI have a CentOS server that I can connect to over my local network. The computer I'm currently on is on that same network and can access the internet. My server can not connect to the internet. The network card is obviously connecting to the network since I can access the server locally with SSH or HTTP. While in the terminal for the server, I type wget google.com and the server can not find the specified host, so this leaves me to believe it can not access the internet.
View 2 Replies View RelatedI have a problem which is connecting automatically to my spwireless. On my windows, my schools provide me the disc which contains several .cer files and a automated batch files to copy the .cer files to the root folders. I can choose to use the other network but in using that, i have to manually connect compared to using the spwireless. Anyway, my problem is that, how do i add the .cer files and to where so when i connect to the network it will look there for the cert. Because when i manually connect, only one cer can be chosen.
View 2 Replies View RelatedI have a problem connecting to the internet using Ubuntu 9.10 . But the same works fine in Ubuntu 9.04.. First I thought it was my hardware problem and asked my friend(also was using ubuntu 9.04) to try ubuntu 9.10 but he too failed to connect....
I have an wired ADSL Modem given by my Service Provider. When I switch on my modem the router gets connected but it cannot connect me to internet...
Whenever i used to setup a new connection in Windows it would just ask me User name and password here i need to fill up something called as "Gateway" !? The connection won't be accepted unless i fill up something in there... So, what do i put in there? I'm on a LAN of 3 computers connected with a router.The router takes one wire as input from the modem(cable).
View 9 Replies View Relatedi have a Levano S10e intel atom preccessor and the net-book is not connecting wirelessly to the network. i have tried at two locations and even plugged in a exterlal wifi adapter. it wouldnt connect then either, the only way to get connected is to use a cat5 cable. here is the ifconfig output with no cat5 inserted and it not connecting to the internet.:
[Code]....
I need to reinstall my GUI but all I can access currently is a terminal, I have the encryption key and SSID but have found all the how to's I've read really confusing since following certain steps on them give me error messages, I'm connecting wirelessly to wlan0.
View 9 Replies View RelatedI was recently asked to get a 3G ZTE 633 modem (not in stores) to connect to the internet whenever it was plugged in. I had it successfully working on my Ubuntu Gutsy Gibbon machine but it does not work on Fedora 10 which is where it is required to work. When the 3G modem is plugged in I use a Udev rule to run usb_modeswitch which changes it from being in usb storage mode to being in modem mode. This part works fine. I then run a second udev rule (on the modem device), this should run a script which connects to the internet. Unfortunately it falls over here. The script does run but it will not connect. However if I run the script manually from root it works fine. I guess that it is a permissions issue.
The device permissions are:
crw-rw---- 1 root uucp 188, 0 2009-04-26 11:31 ttyUSB0
crw-rw---- 1 root uucp 188, 1 2009-04-26 11:31 ttyUSB1
crw-rw---- 1 root uucp 188, 2 2009-04-26 11:31 ttyUSB2
The script and script folders permissions are:
drwxrwxrwx 2 root root 4.0K 2009-04-26 11:46 .
drwxr-xr-x 23 root root 4.0K 2009-04-26 11:13 ..
-rwxr-xr-x 1 root root 95 2009-04-26 11:46 run_internet
One thing to note is that there are three udev devices associated with the modem. They are ttyUSB0, ttyUSB1 and ttyUSB2. I use ttyUSB2 to talk to the modem when connecting. Here are the files. If you require any more let me know:
The first udev rule:
SUBSYSTEM=="usb", SYSFS{idProduct}=="2000", SYSFS{idVendor}=="19d2", RUN+="/usr/bin/usb_modeswitch"
The second udev rule:
SUBSYSTEM=="usb", SYSFS{idProduct}=="0031", SYSFS{idVendor}=="19d2", MODE="0666", RUN+="/outputs/run_internet"
The script:
#!/bin/bash
/bin/echo script
/usr/bin/wvdial &
cp -f /etc/telstra_resolv.conf /etc/resolv.conf
The wvdial config file:
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = ATS7=60 S30=0 S0=0
Init4 = AT+CGDCONT=1,"IP","telstra.internet"
Modem Type = Analog Modem
Baud = 9600
New PPPD = no
Modem = /dev/ttyUSB2
ISDN = 0
Dial Command=ATD
Phone = *99#
Password = user@bigpond.com
Username = password
Stupid Mode = 1
So what am I missing? I suppose it is related to device permissions. Why does the "mode" command not work? With what rights do udev rules run?
I have a vista computer that is connected to a router via a ethernet cord. The router is connected to the internet.I have a computer installed with Debian that does not have a ethernet port in the back of it. Is there a way that I could connect my Debian computer to the internet through my vista?
View 5 Replies View RelatedI have been using PCLOS for a few years now, 2007 and 2009. My PC connects via eth0 to an ADSL modem/router either with static IP or DHCP and Internet works fine.
I formatted a partition and installed PCLOS 2010.7 KDE to it. I booted the new system, expecting to (almost) never see the old one again. But I was surprised to discover that I cannot access anything on the Internet.
In the taskbar I see the network icon which correctly shows my IP and the default gateway (my router) and DNS address. When I open Firefox and fill in a location I get "waiting for [URL]" (or whatever site) forever! I couldn't even get a response from the router itself, on my own local IP segment!
As soon as I rebooted my PCLOS2009 I was online again as usual, so the hardware and network defs sure seem OK.
On the basis of a suggestion I checked my FireFox settings, and found that I had network.dns.disableIPv6 setting as 'false' in Firefox, and I changed it to 'true'. I also changed the proxy setting from 'system proxy settings' to 'no proxy'. These changes did not help, I still cannot connect.
in no particular order:
1) from a shell I can ping any site, by IP *or* by dns name.
2) my browser gets NO response from my router at 10.0.30.100 but if i type the url ftp://10.0.30.100 I *DO* get a prompt for my password from the router. (After I give the password it tells me that ftp is not available, which is true).
3) I have found *ONE* web site that worked in my browser: [URL]
4) Another app that also failed to connect to the Internet: Synaptic does not download repository listings. So I have not tried any other browser, since I cannot install anything.
5) I checked my firewall settings (in the control center) and it says that I have NO firewall limitations.
