Networking :: (socket Progamming In C) / Decoding The Domain Name When An User In The Local Network Is Logging Onto Internet?
Jun 22, 2009
I am currently working on a project related to packet sniffing which has been implemented using the concept of raw sockets. I am using C language.I am able to decode the following details from the packets received from a local network,like:
source and Destination Mac Address
source and Destination IP Address
source and Destination port no
But I am having trouble in decoding the domain name when an user in the local network is logging onto internet.For eg. if a user in the local network is trying to log on to web using his browser say if he has logged on to url then from the packet I need to get the following details
source Mac Address from which user had logged on
source IP Address from which user had logged on
domain name
View 1 Replies
ADVERTISEMENT
Feb 15, 2011
Have a domain registered on a public ip. The domain server for the domain is on the same local network as the web server that uses the domain. The web server naturally has a local and public ip address.
The problem is that whenever I try to access the domain from my local network the lookup for the domain fails, as it cannot find the server from the local network. What's the most painless solution to this problem?
TL;DR: need for my domain to be accessible from both my local network and the outside world, now it's only from the outside which is a problem.
View 9 Replies
View Related
Feb 18, 2010
In the office there is a local network with samba+openldap PDC. The local domain name is company.net. The company desided to create a corporate Website on a remote hosting and desided that the site's domain should be company.net which is same as local network's domain name. So now it is not possible to reach that corporate website from within the company's local network because, as I guess, bind9 which is installed on above menioned PDC looks for company.net on a local webserver. Is there a possibility to let people from this local network browse the remote site?
View 1 Replies
View Related
Mar 31, 2009
I have two networks. One of them is wired, the other is wireless. The wired has an internet connection and a few other computers connected to it. The wireless network has a few hosts connected to it too, but it has no internet connection. What I've been trying, fruitlessly, to do, is make all connections that are bound to the internet, or my wired network, be routed that way, and all the connections to the hosts of the wireless network go that way.
Here's the setup..
Wired:
192.168.1.0/24 Gateway = 192.168.1.1
Route internet through here
Wireless
192.168.2.0/24 Gateway = 192.168.2.1
If my computer sends a packet to the internet, it should be routed through 192.168.1.1 If I send a packet to one of the local hosts of the wireless network, it should be routed through 192.168.2.1. Here's the routing table I've set up(This is one of many configurations I've tried)
Code:
$ ip route show
192.168.2.1 dev wlan0 scope link
192.168.2.0/24 via 192.168.2.1 dev wlan0 src 192.168.2.4
[code]....
With this, and everything else, I get destination host unreachable when pinging. The strange thing is that, if I unplug my eth cable, reboot and connect to the wireless network, everything is fine and I can access the router and the others. I'm trying to improve my networking skills, as I've had this of setting up a small linux box as a router for quite some time, for the fun of it, but I need to get routing under control before I go ruin my network.
View 6 Replies
View Related
May 3, 2010
I Have Ubuntu 9.10 Server installed and for some reason after updating our server with the ubuntu update manager, we can no longer connect to the network via remote desktop, let alone not even able to ping. We are actually able to connect to the internet itself just fine so I dont understand why this isn't working
View 3 Replies
View Related
Mar 22, 2011
I have created more A record in dns. one record is link to my local ip, i have already static ip, how can i access my local website from global.
View 11 Replies
View Related
Jan 28, 2009
We are in the process for Integration Network with our Government Network.
Let say that our network are 192.168.0.0/24
And the Government network are 10.0.0.0/8
I want to know if the local network can resolve the internet names in Government Network. I am using Bind for DNS.
View 1 Replies
View Related
Jan 5, 2010
I have described my issue in detail here: [URL] basically, I am having a mysql server which keeps piling up on it's unix domain socket connections.
here's a small example of netstat as it looks now (count about 80-100 connections paired with httpd):
Code:
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node PID/Program name Path
unix 2 [ ACC ] STREAM LISTENING 3521428 12429/mysqld /tmp/mysql.sock
[Code].....
This is indeed a mysql server issue as far as I managed to debug it but until a workaround/fix is found I need to have my server responsive and the first idea that comes to my mind is to somehow kill those stray connections. as described in the mysql topic mentioend above, killing from mysql will not work. I need to kill them from outside mysql. I have setup a crontab script to kill and restart the mysql server when it cannot connect and it runs every 5 min. however this only lead to mysql being down sooner rather than later because in many cases just kill -9 and then service start mysql does not do the job (it's either part of the same issue of mysql or another issue). basically I need to manually kill mysqld instances a bunch of times until it's ok, OR, if that doesn't work, stop everything that is using mysql, wait a few minutes, and then start mysql. so I ditched that script and now I am manually restarting mysql server every ~ 24 hours.
so basically it's a pain. if I were to kill the stray connections however, I will not have to bother every day with restarting mysql.
View 2 Replies
View Related
Jun 6, 2010
I dual boot windows xp and ubuntu 10.04 LTS and the wireless card works perfectly fine in xp so I know its not a hardware/network issue. In ubuntu, it detects wireless networks, will connect to network and work for about 20 seconds.
[Code]....
and it continues on after this alternating between a normal 20ms and high ping over 200ms. The connection refuses to load anything off the internet/local network.
View 5 Replies
View Related
Sep 3, 2015
I'm trying to set up a *simple* MTA in my local network. The only thing it should be able to do is send system / daemon mails to admin@mylocaldomain. but at the moment I'm pretty much overwhelmed by everything i *should* know in order to set up this MTA
my infrastructure:
- servers:
* test01.mylocaldomain --> should send mails (with exim) to admin@mylocaldomain
* dns01.mylocaldomain --> dns-server
* mail.mylocaldomain --> mail-server (postfix / iredmail package)
I configured exim to be in "internet"-mode. now i have a variety of errors I can choose from (and a variety of solutions that i don't like ).. my test is always an email from test01.mylocaldomain:
echo "Hello World" | mail -s Testmail admin@mylocaldomain
- after running the config, i get the error: admin@mylocaldomain: all relevant MX records point to non-existent hosts --> google says, edit and udpate update-exim4.conf.conf --> dc_relay_domains='mylocaldomain' --> but this exim installation should not be a relay at all. it should only be able to SEND (to this domain), not deliver it. or do i get something wrong?
- after i added dc_relay_domains='mylocaldomain', i get --> SMTP error from remote mail server after RCPT TO:<admin@mylocaldomain>: host mail.mylocaldomain [192.168.x.x]: 550 5.1.1 <root@mylocaldomain>: Sender address rejected: User unknown in virtual mailbox table --> but i don't want to create an account on the mailserver for the SENDER...
- ...so i thought, i'd config exim with the domain "test01.mylocaldomain" (including the server name), so that the sender is clearly from another domain than the mail server handles (e.g. user@test01.mylocaldomain).. but then i get this --> SMTP error from remote mail server after RCPT TO:<admin@mylocaldomain>: host mail.mylocaldomain [192.168.x.x]: 450 4.1.8 <root@test01.mylocaldomain>: Sender address rejected: Domain not found
I really just wanna send mails in my local network.
View 0 Replies
View Related
Aug 22, 2011
I have public IP and registered domain mydomain.eu. On domain provider DNS servers, mydomain.eu points to my machine called solis (10.10.10.1; this is gateway, dhcp and dns server; eth0 is outsite, eth1 inside my network). I have also laptop which is connected to eth1 through wireless AP. From laptop and solis I have access to outside and inside network without problems. Of course my dream is to have access to solis from local network using name 'mydomain.eu' but not fully name 'solis.mydomain.eu'.
View 5 Replies
View Related
May 30, 2011
Take a physical user FRED. FRED is a linux user ( known by linux on his laptop ) FRED is a Samba user ( Known by samba on the samba pdc server ) When he logs locally (with username/password) on its standalone laptop (with no network), he is known as FRED:user. He access his data in /home/FRED/. When he logs through samba (with username/password) on the domain MY_DOM, he is known as MY_DOMFRED:MY_DOMdomain user. He access his data in /home/MY_DOM/FRED/. ) Is it possible that the human FRED has only one repository and have full access to its repository regardless of how it was connected. If yes, how to do it
2) If not, Is it possible that the human FRED has full access to /home/FRED/.............. and /home/MY_DOM/FRED/.
View 4 Replies
View Related
Jun 25, 2010
In short: browsing the internet with domain names does not work. The long version: I've configured my network with DHCP and ifup. Ping works on my internal net and with servers in the internet. Dig work's too! I get the right IP to the requested domain. When i try to access the internet using firefox or even wget i get an DNS error. For example wget is showing the following error: Resolving heise.de... failed: Name or service not known. wget: unable to resolve host address 'heise.de'
Again dig show me the right IP and if i add the entry to /etc/hosts it work's too! I've even tried it with manually setup of ip address, nameserver and default gateway but with the same result. Switching off the firewall has no effect on this problem, too.
View 9 Replies
View Related
May 14, 2010
ever since upgrading from karmic to lucid, i cannot ping fqdn hosts in .local tlds. nslookup & dig work, but most other utilities fail (ping, traceroute, etc...). i know .local is an invalid tld, but apple seems to have made it a defacto standard on private networks, so i'd imagine somebody else has seen this issue before... is there a simple fix that doesn't require managing hosts file entries on a bunch of systems?
View 3 Replies
View Related
Mar 19, 2009
I recently installed bind9 on mandriva 2008.1, after having done the necessary configuration.. I still can't find my domain I configured cant ping on other machines on the LAN but can actually ping on any other website on the internet even though name server is configured to point to local machine..... I dont understand what I'm doing wrong.
View 14 Replies
View Related
May 10, 2009
I want to use single label host names on my local LAN, without using any domain (at least no registered one). My machines should be named in a fashion similar to 'myserver', 'mydesktop' etc. so that i from a browser on any LAN machine may write 'http://myserver', and get the webserver on 'myserver' (so NO domain part, e.g. myserver.domain).
Do i need to create a DNS zone for each host or is there a way to put all host in a single zone, if so; which? Would such a name be considered a root domain?
View 4 Replies
View Related
Jun 7, 2011
I think this goes here, but I'm not sure. I decided that XAMPP had been troublesome enough. MySQL never worked. So I decided to instal the LAMP stack offered by YaST. I went about installing it thinking that it would all work. But it seems that I was wrong. So I try to start mysql, and here's what I get:
Code:
the-matrix:~ # mysql start
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2) or
Code:
the-matrix:~ # rcmysql start
Starting service MySQL warning: /var/mysql/mysql.sock didn't appear within 30 seconds
chmod: cannot access `/var/run/mysql/mysqld.pid': No such file or directory
[Code]...
View 6 Replies
View Related
May 16, 2010
I'd like a way to see all of the devices on my local network and what their local IP address is. I recall that I used wireshark to troubleshoot a similar problem a while back, but it doesn't seem to have a way to see all of the devices- only the traffic. (I'd like to do this without having to physically interface with my router if possible, and I am in an encrypted network if that matters)
View 6 Replies
View Related
Jun 28, 2011
I have installed a web server on my local network. Everything is well configured and web pages are shown correctly from Internet (outside the local network) using the domain or the public IP.The issue is if I try to see that web pages (using the domain or the public IP) from inside the local network. In that case the router config page (192.168.1.1) is shown instead of the web pages.From inside the local network I'm only able to see the web pages using the internal IP address (192.168.1.XX).
View 2 Replies
View Related
Nov 2, 2010
I can't update my ubuntu clock with my server. If i run the command ntpdate domain.local, it gives me this erro (no server suitable for synchronization found) if i run the command nslookup domain.local it works well and found my server
View 3 Replies
View Related
Dec 2, 2010
I have an internal domain (dev.lan) for which my Ubuntu server is authoritative. We have a number of subdomains under that domain (test.dev.lan, svn.dev.lan, etc.). The server also acts as the primary DNS server for my office. It was originally set up under Ubuntu 8 and worked great.
However, ever since we upgraded to Ubuntu 10, our Windows clients periodically lose the ability to resolve domains on the dev.lan domain. Internal IP addresses can still be pinged from the Windows machines so it does not appear to be a network-connectivity issue. External domain names continue to resolve without any problems. The only workaround is to restart networking on the Windows clients. It's frustrating because it happens several times a day.
bind9 logs no obvious error messages.
View 3 Replies
View Related
May 25, 2010
I've got an Ubuntu server hosting our websites and other various things here in our own home. We recently switched to a router that doesn't support loopback (abomination), so I've set up hosts files on our computers so we can access our own sites when on our home LAN.
However, we often take our laptops as we travel about, and I'm guessing due to the hosts files when we try to access our sites, it'll look on whatever local network we're connected to for our server, which won't work, obviously.
Is there a way to set up something like a hosts file that'll only try to look up the local IP of the server when we're on a specific network (our home one), or have one that tries to look for the local IP first, then proceeds to try and resolve the domain name and use the external IP if the local IP doesn't work?
View 6 Replies
View Related
Dec 8, 2010
We have an Asterisk machine that we suspect periodically loses internet connectivity, causing all calls to drop. First, would this sort of thing be logged anywhere out of the box? I haven't noticed anything in /var/log, but that doesn't mean it's not there. If this is not typically logged, how I might go about logging it? I'm currently running a bash script from cron every 5 or 10 minutes which pings Google and writes success or failure messages to a log file. This works fine for extended outages, but if the internet connection drops and comes back between cron runs, it won't be caught.
View 4 Replies
View Related
Jul 2, 2010
I jsut installed 10.4 Server. I want to hook it to the network. I want to hook up through wlan0. my router is WPA and is my DHCP.
View 4 Replies
View Related
Feb 24, 2010
I have a linux firewall. I want to limit a ssh connection number from local network to internet .
Example :
Internal pc (192.168.0.10) start a ssh scan to the external (internet) host.
I want that iptables limit that host (192.168.0.10) and block ssh connection from this host at 3 attempt.
View 2 Replies
View Related
Sep 15, 2009
I have a Dell PowerEdge 1650 server with 3 NICs in it. I am trying to use one NIC (eth0) to connect to the internet, the second NIC (eth1) to share the internet connection to a LAN, and the third NIC (eth2) to connect to the LAN.
It is running Ubuntu server 8.10
The problem that I'm having is that NetworkManager (version 0.7.0) keeps setting eth2 as the default connection, and then I don't get any internet at all from the server.
My main goal is to be able to share files from the server to computers on the LAN. The secondary goal is to have a virtual machine hosting a Halo server, connected through eth2, so that it can host LAN games. But that is a secondary goal after I get the connections to work.
I've been looking around and finding other people who have done bits and pieces of this, but not the whole thing. I had been hoping to simply use the NetworkManger, but I don't mind editing config files.
Also I can't seem to find any good instructions on editing the /etc/network/interfaces file. The man file is incomplete, and everything seems to point back to the man file.
View 2 Replies
View Related
Feb 10, 2010
I opened a socket with sock_create()... bind() listen() accept().
Then, the far end closes the connection.
I want to close the near end, so I can re-open for the next connection.
But there is no close(), and sock_release() crashes the kernel.
View 2 Replies
View Related
Aug 17, 2009
I want to give Administrator privileges to Root user in Linux Domain Controller
View 12 Replies
View Related
Jun 29, 2010
i have php5 and mysql on ubuntu server which is hosting a WordPress blog. i activated it remotely over the internet and it works fine still over the internet. now im home and using my local network again and now when i try to go into it with its local IP, it just shows some text (blog title, posts and so on) with NO pictures.
View 2 Replies
View Related
Apr 7, 2011
i had created domain but not getting domain in /var/qmail/user/assign file.also it error /home/vpopmail/bin/vdominfo abc.co.inInvalid domain name
View 2 Replies
View Related
