I have a problem with my slackware 13.1 that is that i can�t access it outside my local network. It�s running behind a router and i have activated the DMZ to my slackware computer i can access the web with my slackware computer but i can�t get access to it outside my LAN.
View 8 Replies
I'm trying to set up a small Intranet system to run OpenERP or similar using browser-based clients. I have an Ubuntu machine running 10.04 desktop edition to act as a temporary/testing server until we set up a proper, dedicated machine with 10.04 server edition. I have installed Apache2 from the repos and it is up and running fine - locally. That is the problem, I can't access the server from other machines on the LAN. Ping works, btw. So I've been reading tutorials and howtos for the past week, but for the life of me, I can't find what I'm doing wrong. The standard Apache setup seems to be made to "just work", so although I've looked at the various configuration files mentioned in the tutorials, I haven't actually changed anything.
View 9 Replies View RelatedI'm trying to setup an Apache webserver on my computer in order to practice HTML5/CSS3 for an upcoming competition I'm in. I'm able to access my site from inside my network, but I cannot outside my network. I've had several people try, and they all report that the server just times out. I'm running Ubuntu 10.04 and Apache 2.2.17
My site is at [URL]
Here is the output of ifconfig
Code:
eth0 Link encap:Ethernet HWaddr 00:26:22:50:0f:0a
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
[Code]....
Running Ubuntu 9.10. In the Remote Desktop config dialog I get: "Your desktop is only reachable over the local network. Others can access your computer using the address 127.0.0.1 or tabatha.local." I understand this means only the loopback ip address is available. All my other machines show their true local ip address (e.g., 192.168.1.104) in this dialog. Thus I cannot log on to this desktop from other machines.
When I try to do a remote logon from another Ubuntu 9.10 box (or from an XP box using a VNC viewer), I get: "Connection to 192.168.1.102 has been closed." What steps are needed to make this machine show its actual ip address? All file sharing between the various machines is working properly and all windows shares back and forth between XP and 'nix, and among the the vaious XP boxes and linux boxes are available as designed.
I have created more A record in dns. one record is link to my local ip, i have already static ip, how can i access my local website from global.
View 11 Replies View RelatedThe desktop computer stores most of our family's files and is mostly powered on, installed with Debian/openSUSE (KDE4).
We have 2 more portable (also Linux, KDE4) computers and frequently need to access files stored in the desktop. Currently file transferred is by usb thumbdrive which is troublesome.
The computers are all connected to a wireless router that provides access to the internet.
Reading/goolging and understand that there are many ways to share files to the extend that I am lost - Samba, NFS, SSH .....
My problem is to find out: What is the best way to access computers within the local network? "Best" here means:
- Secure
- Relative ease to setup
- Easy to use, file access with GUI (file manager?) as the entire family is using the computers.
New XAMPP security concept: Access to the requested directory is only available from the local network. This setting can be configured in the file "httpd-xampp.conf". If you think this is a server error, please contact the webmaster.
View 9 Replies View RelatedI've been researching this all day with no luck thus far. Basically I need to cutoff port 21/ftp access from IP addresses outside of my local network. My local IP range is something like 192.168.0.100 - 192.168.0.150 -- so anything outside of this range would automatically be blocked.
Any IP address outside of this range would be denied as I use SFTP for remote access, etc. from home, etc.
I've researched IP tables, tcp wrappers, etc. but am still unsure which would be best for what is probably a simple fix.
Relevant info: Vsftpd via Ubuntu Server 10.10
I have installed apache php and mysql on my pc during debian installation... some of my friends complain they cannot access my webserver from their home and it's available only within my local network... Please help regarding this...
View 6 Replies View RelatedI have installed Ubuntu on four machines at work and have been blown away. On my machine I have Apache setup for web development and other machines can "see" it using my IP address. I would like to have it so they can access by the name of my computer though. I have no local DNS server so I guess I need to hard code the relationship in each machine? Ideally I'd actually like to be able to use subdomains (which I use locally to avoid annoying .htaccess path problems). i.e. from another machine on the network to go to [URL].
View 3 Replies View RelatedI was wondering if anyone could recommend a way a very lightweight MTA without network capabilities just for receiving local administration emails?I know I could restrict access, I was just wondering if there was something more lightweight designed purely for local use.
View 2 Replies View RelatedI have a file 'my_file.txt' stored on 'myserver1.col.edu' Now, I am using a different server 'myserver2.col.edu' to do some work and I want to access 'my_file.txt' on 'myserver1.col.edu' to read (possibly edit) WITHOUT physically copying the entire file across. Is there a way to do this - perhaps through ssh?
View 2 Replies View RelatedI just set up my firewall, and now I can't see any Samba workgroups. It says it can't find any workgroups on my local network, and it may be caused by a firewall. It is a firewall issue because if I disable my firewall, I can see the workgroup. What do I need to open on my firewall to see the workgroup? I am using Slackware64 13.37.
Here is how I set up my firewall.
Code:
iptables -P INPUT DROP
iptables -P FORWARD DROP
iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
iptables -A INPUT -s 127.0.0.0/8 -d 127.0.0.0/8 -i lo -j ACCEPT
iptables -A INPUT -p icmp -j ACCEPT
I got the commands from here url.
In my computer networking class I have the option of doing a project where I set up a dns server for our classroom network. The problem is that this network is totally separate from the school network and we aren't allowed to connect it to the internet. I want all the machines to ping each other by name instead of ip using dns instead of host files on all 20 computers. I read on a site somewhere that you cannot do this because the dns queries will always go to the root servers. Is this correct? Is there some way I can do this using dns? The machine in question is using Ubuntu 9.04.
View 1 Replies View Relatedi have successfully done the setup of postfix and dovecot on this link [URL]I run Cent OS on top of window 7 via VM Player,i want to access mailbox from windows 7 using email client like Thunderbird and Outlook. What setting i need to do in my mail server ?
View 1 Replies View Relatedi would like to setup one of my old pcs as a file server and internet gateway; we are living in a large building shared with 40 others. the ubuntu box would be the one connected to the internet via ethernet and sharing connexion via wifi. i haven't started yet - presently, i am doing the ground work and reading before to start i understand sharing the internet is relatively simple and can be done from the GUI
What we would like is slightly like BT Fon or BT Open Zone in the UK: you can hook on a free network but in order to access outside (internet: email, web, ftp, etc) you need to login login would help us monitor fair usage. I imagine something with username and password for each user would do: as we are a few in the same building not everyone is actually paying for the connection and we don't want to end up with rather large excess bills. So the ones who are paying access both files and internet; those who dont just have access to the files on the local server.
Do i need Ubuntu server to set this up? What hardware would be ideal - given we are all far from rich but willing to have a nice setup
It would be great if you could share some knowledge around the topic and eventually provide some tutorial; also any heads-up on the hardware side would be great! (signal booster, etc - there's 3 floors and 3 buildings)
Each time I'm moving my new files and directories from my local slackware PC to my NAS (Linux based) in the LAN.
This NAS is 24/7 online and I can access it from the net.More than that it's backed up every day.
I was thinking of making my home directory directly in this NAS.
I didn't made a separate partition for my Home during the installation of slackware in the PC.
I am trying to setup my home server for test purposes. Now the IP I have assised my home server are
192.168.1.2
192.168.1.3
Port 80 is open in my firewall and Selinux is off at the moment.Now I have my DNS at my registar pointing at my home IP. Will that work? I have my name server configured with my local ip. Should I use my externel?
I want to restrict the access to my local web server by IP address. Im in a LAN (192.168.200.xx) so i have this:
[code]....
But when i try to connect from 192.168.200.4 it says i don't have permission to access
Folks, I have an old notebook (IBM T23) running as my print server on the home network. Recently my wife needed to fax some documents. No problem, said I, I will just set up a fax server. That was months ago and I have achieved nothing more than dig a deep pit. Sigh.
Could some kind person give me step by step instructions for this?
Setup: LAN including IBM T23 with an external modem (it has an internal winmodem, but I expect using that to be just too hard) and running FC10. This machine currently has the only printer, accessible from all machines on the LAN.
Wish list: Be able to fax from any machine on the network, via the T23->modem. Preferably, to see the fax device as a printer on client machines, so it is a simple matter for my wife to 'print' to the fax. Machines on the LAN are FC10 (wife) and FC11 (me). Ability to receive faxen is not necessary, but if it is feasible I MIGHT try to set up for it too. The phone line is our normal house line, so I don't want the fax to pick up any incoming call unless I instruct it to.
Current status: Hylafax installed on the T23. So far cannot make it recognise the external or internal modems. Have not figured out how to make it appear as a printer on the T23 or over the LAN. The problem is me, but at my advanced age I am not too proud to admit my failing grey matter and ask for help.
Kind regards, Doug.
I want configuration a DNS server for my area! What DNS server software is better than other software?
View 4 Replies View RelatedThis may or may not be an easy question, as I'm somewhat uninformed in the networking side of computer science. I own a rented server with a static ip address. Is there a way that I can forward requests from it to my computer to setup a LAN network of sorts over the internet. Specifically, there is a program I would like to use that requires LAN (you enter an IP to connect to). Is it possible to setup my server in a way that users could connect to my server's ip, which would then forward it to my home computer (I'm fine with setting up my home computer with programs that would allow this) that could host?
View 2 Replies View RelatedI am trying to connect to a nfs server on my local network ( the server is a fedora 12 box ) using slackware 13.1 but I am having some problems. First of all I am sure that the server is configured ok and my desktop can ping the server but when I try :
mount -t nfs 10.0.0.1:/home/usr/file /home/usr/tmp I get the following error : mount.nfs: No route to host
And when I try to rpcinfo -p 10.0.0.1 I get the error :
rpcinfo: can't contact portmapper: RPC: Remote system error - No route to host
I'm running into a little trouble trying to configure bind as a caching dns server on centos 5.6. for debugging purposes I've got iptables and selinux turned off, but I can't get see the dns service on my local network. on my server itself I can run nmap against it and see that port 53 is open, but if I try it from another computer on my network the port is closed.
View 7 Replies View RelatedTake a physical user FRED. FRED is a linux user ( known by linux on his laptop ) FRED is a Samba user ( Known by samba on the samba pdc server ) When he logs locally (with username/password) on its standalone laptop (with no network), he is known as FRED:user. He access his data in /home/FRED/. When he logs through samba (with username/password) on the domain MY_DOM, he is known as MY_DOMFRED:MY_DOMdomain user. He access his data in /home/MY_DOM/FRED/. ) Is it possible that the human FRED has only one repository and have full access to its repository regardless of how it was connected. If yes, how to do it
2) If not, Is it possible that the human FRED has full access to /home/FRED/.............. and /home/MY_DOM/FRED/.
I had problems with my Ubuntu Server 10.4, so I reformatted and reinstalled (I only choose OpenSSH from the install menu), then after it rebooted I installed apache. So I can access the machine via web, ssh and scp from within my local network, but strangely outside my network I can access it from web, but not ssh or scp. Nothing has changed on my router.
View 9 Replies View RelatedI just setup a ubuntu 10.10 box learn linux and to play around with, and want it to host my website. I can see the web site on my local network no problem but the outside world gets a time out message. I check to make sure everything is forwarded correctly on my router and the dns so i has to be something in ubuntu blocking out-of-network traffic how do i turn port 80 on to the outside world
View 4 Replies View RelatedI am trying to setup a DNS server on my local network. When I set linux clients to use it, it works as expected. However, when I set windows clients to it, the root name doesn't resolve. For example, I have a zone called daniel. On linux "anything.daniel" resolves to the correct ip as does "daniel" which is the behavior I want. However, on windows 7, "anything.daniel" resolves correctly, but "daniel" doesn't. I am new to BIND9 so my config is mostly copy and pasted. Here is my zone file for daniel (where #.#.#.# is the ip I want daniel to resolve to):
@ IN SOA ns1.daniel. admin.daniel. (
2007031001
28800
3600
[code]....
I'm trying to connect to a data server (basically a big hard drive) in my lab with my computer. On the Mac that's at the workbench next to me, you enter Go -> Connect to Server. From there, enter the IP address that I have (I can't find a server name--just the IP.). It asks you which subsystem you want, queries you for a user name & password, and then opens a window with all the files. Meanwhile, on my Ubuntu machine, I have a "Connect to Server" option under "Places" on my main menu. But when I choose that, I need to select what kind of server it is, from several options that don't seem right. (It's not FTP, it's not SSH, it's not a form of HTTP, and that leaves "Windows share?") I've tried several things, but usually get back 'Cannot display location "smb://<IP-ADDRESS>/" The specified location is not mounted'. I've tried many ways of mounting this drive, but it usually gives me permission denied errors (even though I *know* I have the right login and password--I've logged in using the aforementioned Mac).
View 13 Replies View Relatedhow to configure dhcp server in a local lan network
View 2 Replies View Related