Ubuntu Installation :: Won't Boot From Disc - System Shows A Folder With A Question Mark And Boots Into The Default OS 8.6
Mar 9, 2010
I've tried to install 9.10 on my PowerBook G3, with both a CD and DVD. However, the system shows a folder with a question mark and boots into the default OS 8.6. I even tried with an older ubuntu disc (8 point something) that had worked on another computer, but this didn't work either. I know the computer can boot from the CD drive, as it works with my OS X 10.4 DVD.
View 4 Replies
ADVERTISEMENT
May 12, 2010
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies
View Related
Nov 14, 2014
I'm installing Debian for the first time on a MacBook but each time I use the ISO I only get a blinking folder with question mark on startup. This occurred with both the small and large ISO from Debian.org. I think it's a known GRUB issue. I can boot using refit off HD but I still can't get into full install.
View 3 Replies
View Related
Jan 7, 2010
I bought a t770.uk HP desktop PC, which came without a Hard drive as the pervious owner had removed it for security reasons. A week later I got a hold of a brand new - out of an anti-static sealed bag - compatible Western Digital Caviar SE 80GB SATA150 7200 HDD, and installed it as directed by my t770.uk manual. Up until now, things looked to be on a roll. As I don't have any windows OS, I figured Ubunutu would be the way to go (and it certainly is from what I've heard and read about it. I can't wait!).
So I sent off for a CD and it popped through my mail a few weeks back. The problem that I am having is after booting past a very brief view of the HP POST screen, the screen goes black with the error "Disc boot failure-insert system disk and press enter". I've tried placing the Ubuntu disc in (assuming it is asking for that? An OS disc) and restarting, and changing the boot order around, but no matter what I do the error persists and I can't install Ubuntu. I really want to get this PC running with Ubuntu.
View 9 Replies
View Related
Jun 25, 2010
I have a compaq laptop with a hard disk separated in three partitions:Partition 1: Ubuntu 9.04Partition 2: Windows XPPartition 3: DataI usually work 95% of my time with Ubuntu, but store all my data in the data partition, so the information is always available no matter if I work under Windows or Ubuntu.The system has been working perfectly well for several months, but a couple of weeks ago I detected that some subfolders are shown as empty, but I know that there are several files on them (mostly pdf files document-scanned). When I use windows, all the files are shown correctly. In other folders, the system shows some files, but not all of them. (again mostly PDFs are not shown).My Ubuntu system is fully updated. The data partition is in NTFS format. Linux is EXT4. Windows is NTFS again.I would appreciate to know if any of you guys have detected a similar problem and if so, how to solve it.
View 6 Replies
View Related
Mar 1, 2010
I am also wanting to install on a laptop which is about 2 years old. I get the error message "ntldr is missing" when it boots up and doesnt recognise the disc even though it is set to boot from cd first!
View 2 Replies
View Related
Mar 4, 2010
I recently upgraded grub -> grub2 on my karmic box. Grub2 worked when chainloaded from legacy grub, and also the first time I tried it standalone. Both times the grub2 menu came up.
I ran vbeinfo at a grub2 command prompt, and found my monitor's native res listed - 1280x1024. I added that to my /etc/defaults/grub and then ran update-grub, and rebooted. This time no menu appeared and the default entry booted straight away. I suspected that the resolution was not supported for some reason or that the way I entered it in the config file was wrong, so I commented it out again in /etc/default/grub, and ran update-grub again - to no avail.
I have since tried lots of different formats for the GRUB_GFXMODE, such as 1280x1024@24, 1280x1024x24, and the normal 640x480, but none of them give me a grub menu. I have even tried using GRUB_TERMINAL=console, to no avail. I have checked the /boot/grub/grub.cfg file each time to make sure my changes were put there correctly by update-grub. I have also made sure that timeout was set to 10, and the hidden timeout was set to 0. My GRUB_CMDLINE_LINUX_DEFAULT="quiet".
I have reinstalled grub2, grub-pc, and grub-common, and I have dpkg-reconfigured them all too. I have no idea what to do to get my grub menu showing up again.
View 6 Replies
View Related
Mar 18, 2010
How can I set up my pc where it default boots to my main HDD with Windows 7, and a secondary HDD with ubuntu after pressing F12 or something? I was going to just do a dual boot, but I remembered I had this extra HDD sitting around (which I was 'borrowing' from walmart for something I can't remember and lost the receipt =s) so I figured I'd just install ubuntu to it and dual boot like that.
EDIT: Disregard that. Just installed Ubuntu to my second HDD and it booted to the grub loader, which had the Windows 7 option in it. However, I do have one more question: as I'm still using the Windows 7 RC (which expires pretty soon), will a clean install of Windows 7 overwrite the grub loader seen on startup? If so, how do I go about booting back into the second HDD to reinstall grub?
View 1 Replies
View Related
Apr 27, 2010
I have a custom compiled kernel which seems to work OK. However, during boot, I get:
Apr 27 21:16:14 poni kernel: eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address 00:21:70:90:2d:6c
Apr 27 21:16:14 poni kernel: eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet)
[code]....
System continues to boot OK and everything seems to work fine as I expect. I am not sure what the above causes. It looks related to USB, but I am not sure. lsusb gives:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
View 3 Replies
View Related
Jun 30, 2011
I just upgraded to F15 and it went well. But at the next and each subsequent cold boot the BIOS reports "Your system last boot fail or post interrupted Please enter setup to load default and reboot". The board is an asus P5N-D. I press F1 to blow past the error and all is well until the next cold boot. Restarts are fine, no errors at all.
View 12 Replies
View Related
Feb 5, 2011
recently i have installed fedora13 on my laptop okey and when i logged on i t provides two option first with user name and second with other so what is tha purpose of other option
also,when i go to mycomputer file system then at that point i found that there is cross[x] mark on root folder why this is so.
View 3 Replies
View Related
Jan 30, 2011
I have windows7 installed in my laptop. I tried installing Redhat linux in it, and I was successful. But then I logged in with windows7 and deleted the partition in which I had installed redhat through computer management. Now my system doesnt boot with windows instead it boots with GRUB. Also to inform that the deleted linux partition I merged with Windows.
View 2 Replies
View Related
Oct 26, 2010
I havea tv show burnt to DVD-r using the Panasonic DMR-E50. Now I would like to play it on my pc. However, it is only recognised as a blank disc. Can you think of anything I can try to move this project along?
View 5 Replies
View Related
Jan 1, 2011
I have just installed 11.3 x64. The installation went fine and worked for the first few hours. I ran the online update tool, and now it cannot find grub unless the installation disc is inserted and I select the "boot from hard disc" option.
I have read about the problem of the root partition being back, but not sure that's it.
sda1 - swap
sda2 - /
sda3 - /home
There used to be a repair tool in the installation disks. I could not find that in this media. Is that still available?
View 9 Replies
View Related
Oct 29, 2010
I updated and removed some packages that could not be upgraded, and now Firefox and Google Chrome show web pages in bold font by default. By this i mean that all pages not setting font-weight explicitly.
This is on Meerkat, upgraded from long before (Lucid, i believe). I'm guessing the KDE packages are due to me having Amarok and konsole installed some time long ago, so i assumed i could ditch these.The terminal output from the commands above is attached.
View 2 Replies
View Related
Jan 26, 2010
I am getting an error after the self boot sequence when after X minutes the system auto boots the highlighted option in my case it is mint 7 after that screen an error comes up with Random numbers and letters then Stuck?
View 1 Replies
View Related
Feb 10, 2010
After upgrading from 9.10 to 10.04 my System no longer boots. I had a Dual-Boot System. On Boot I get - "error : the symbol 'grub_puts_' not found grub rescue> (prompt):
If I run 'insmode /boot/grub/normal.mod' (I get the same error)
If I run 'insmode /boot/grub/ext2.mod' (I get 'The symbol 'grub_xasprinf' not found)
If I run ls /boot (The Kernel File Names look Ok)
If I run in Rescue Mode it Reports (The installer could not find any partitions, so you will not be able to mount a root file system. This may be caused by the Kernel failing to detect your hard disk drive or failing to read the partition table, or the disk may be unpartitioned. If you wish, you may investigate this from a shell in the installer environment.) I ran the recommended reporting script and got the following output:-
Code:
= Boot Info Summary: =
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #4 for /boot/grub.
=> Windows is installed in the MBR of /dev/sdb
=> Syslinux is installed in the MBR of /dev/sdd <<< This is my USB Flashdrive .....
View 2 Replies
View Related
Nov 29, 2010
After my upgrade the bootup seems to take a long time.I am dual booting with XP.From the boot menu when I select Ubuntu it takes 35 seconds before I get the login screen.Is this normal?Also, other apps seem to be running slow. Running Win 7 under VMWare Workstation 7.1.
View 7 Replies
View Related
Jun 18, 2010
The cd starts up fine screen shows ubuntu logo and five dots then after it goes blank and screen goes to sleep. Also after install within windows i startup into ubuntu it then asks me which to boot into; windows 7, ubuntu, or ubuntu (debug mode or sumthing like the).
View 1 Replies
View Related
Oct 18, 2010
I'm dual-booting Fedora Linux with windows7 and everything worked fine until now My problem now is that I did an upgrade on my windows and ever since,My system boots into windows automatically without giving me the option to choose which operating system to boot to via the GRUB prompt.I'm locked out of my Fedora by windows
View 3 Replies
View Related
Apr 29, 2011
I upgraded from 10.10 to 11.04 and after the upgrade
- the system boots,
- the grub menu appears,
- the splash screen comes up and then
- I have a black screen and that's it!
I saw, at the end of the installation process, that the driver for the nVidia video card was removed.
View 9 Replies
View Related
Aug 17, 2010
am running fc10 and windows xp on my laptop.As usual my windows got crashed.When i inserted windows xp cd, the system is not booting from disc properly. It shows inspecting systems hardware and then turns into a blank screen.
View 2 Replies
View Related
Aug 2, 2010
I've tried to boot my Ubuntu 10.04 from my disc drive, and installing it in Windows like an app, but every time I do my screen looks like it went bad. The top two inches are the way it should be but the rest is white, and I can't see anything. Is there some setting on my comp I need to adjust or did I just get a bad disc? The disc doesn't have a scratch on it and I've cleaned twice now.
View 6 Replies
View Related
Mar 11, 2011
After happily running a persistent install from a USB stick for a week I decided to delete my Windows install and replace with Ubuntu.
I did the install from the USB stick, selecting the option to use the whole drive.
When the install finished I was prompted to restart. I removed the USB stick and did so. The machine rebooted... and nothing. Just a flashing cursor top left of a black screen.
I've booted the USB stick version and looked at the hard drive. Stuff has been installed sure enough, but it will not boot.
Machine is Acer Aspire 5920 laptop. Running Ubuntu from USB stick has been smooth as silk with no issues.
I'm not technically minded, so I'm afraid that any assistance (for which I would be eternally grateful) may need to be n00b-style dumbed-down.
View 3 Replies
View Related
Jan 4, 2009
I'm trying to boot into the Live CD on my Ubuntu installation disc. I changed the BIOS to boot from my disc drive, and I can hear it read the disc, but then my computer just boots into the Ubuntu installed on my hard drive. How can I boot the Live CD?
View 9 Replies
View Related
Apr 21, 2010
I'll like to mark all packet coming from and going to an ip adresse. And I'd like to match that mark packet in an other rule. Ex :
Rule 1 : Mark all packet coming from 192.168.2.0/25 with number 1
Rule 2 : Drop all packets which has been mark with number 1
View 3 Replies
View Related
Aug 13, 2010
I am setting up a mail server. After installation of shorewall-common, shorewall-doc
Following this link http://flurdy.com/docs/postfix/
For setting up
It requires me to copy thge content of /usr/share/doc/shorewall-common/default-config/rules to /etc/shorewall
cp /usr/share/doc/shorewall-common/default-config/rules /etc/shorewall/
But i observed that the folder default-config is missing. I have purge it apt-get and reinstalled but still it does it have that folder. What could cause this thing and how can i go about it?
View 1 Replies
View Related
Nov 13, 2010
I have an ASUS G51J notebook with Windows 7 installed. I was following This Guide. I set aside about 100GB for the Unallocated partition. When I started my laptop, I chose to boot from CD (which has an Ubuntu 10.10 ISO on it). I saw a purple background with two icons at the bottom of the screen, and eventually "Ubuntu" appeared in the center with a few dots underneath it. These dots would change color from left to right like a loading bar.
This is where my issue comes up. My friend was using this same CD on his Dell laptop and his desktop which has a XFX motherboard, Q6600 processor, and Invidia 470 graphics card. After this "loading bar" was done, he would be asked if he wanted to boot or install Ubuntu.
This didn't happen for me. What happened instead was that I saw what looked like my Windows desktop after having gone through a meat grinder. There were various icons randomly in pieces all over the place. The only icon that was in one piece (by chance) was my shortcut to Skype.
Has anyone seen this before? Am I doing something wrong? My friend was saying that maybe I should try with a fresh reinstall of Windows and try again. I wasn't even given the choice to just boot from disc. It got to the point where I expected it to give me the options to do so, but instead the Kansas version of my desktop shows up after being hit by an F5
View 9 Replies
View Related
Jan 27, 2010
I have just installed Karmic on a dual boot system with XP and Ubuntu on separate drives.This set up worked ok with Jaunty. When the boot menu comes up, selecting Linux results in a successful boot. Selecting "Windows XP home edition (on /dev/sda1)" results in the screen changing to blank with the word "Grub" in the top left corner and no further progress.No error codes associated with this message. I've tried suggestions I've seen in various threads but have had no success.
Below is the contents of menu.lst:
# menu.lst - See: grub(, info grub, update-grub(
# grub-install(, grub-floppy(,
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
[Code]...
View 9 Replies
View Related
May 16, 2011
I just installed Ubuntu 11.04 64-bit alongside Windows 7 home premium on ASUS A52J, corei5, ATI HD6370m.The problem is - I Can't Boot to it!!!! the machine boots straight away to win7. I don't understand it... the installation went extremely smooth and fast
View 3 Replies
View Related
