Hardware :: Using The Vizio Dual Band Router With Ubuntu 10.10?

Feb 3, 2011

I am using the vizio dual band and it is working quite well with one exception. i can not get it to access the usb network media.( hard drive plugged into usb port on router) it does recognize the the drive being there, it just will not allow me to access it. when i click on it nothing happens.

View 1 Replies


ADVERTISEMENT

Ubuntu Networking :: Connecting A Modem Router With A Mobile Broad Band Umts Connection?

Feb 17, 2011

sometimes our ADSL connection gives up and we are left without internet connection for days until the problem gets fixed. I mean by this problem along the phone line. It affects all machines that connect to the internet through a Netgear WIFI Modem Router. I recently tried an alternative when this happens is to use a USB Huawei Mobile Broadband UMTS connection which works when you insert it in 1 laptop. Is there a way i could get the Netgear WIFI modem router to connect on that usb stick or PC that is online on that usb stick and give access to other machines that will want to connect to the web ?

View 4 Replies View Related

Ubuntu Networking - N600 Wireless Dual Band Usb Adapter Not Working

Jul 5, 2011

I am running the newest Ubuntu and can not get my wireless adapter working. I ran

[Code]...

View 9 Replies View Related

Ubuntu Networking :: Linksys Dual Band Wireless NUSB Adapter Not Working On 10.04

Jul 30, 2010

I'm not a new user to ubuntu but I'm stuck with a driver issue on a wireless adapter upgrade for ubuntu 10.04 lucid lynx. I'm running an acer aspire am1201-e1622a with amd athlon x2 64 bit processor, however i'm only running the 32 bit version of lucid lynx. The following are a few outputs of some commands that might assist in finding the proper driver. Before though i will tell you what i have done.

I have installed a few different drivers from windows wireless driver installer such as the xp and vista 32 and 64 bit versions with no success in the computer actually recognizing that i have a wireless adapter installed. The windows wireless driver installer said that hardware was present but i was unable to scan for networks or even see that i had a choice to do that. This meaning that it didn't show i had wireless capabilities in my network manager. i tested this with gnome network manager which is the default manager for 10.04 and also with wicd with no success.

Following these tests i attempted to install a driver from source following the instructions on another forum. This allowed me to manually turn on the wireless adapter but i was still unable to find any networks. This meaning that wicd was able to see that i had a wireless adapter installed but it for some reason was unable to see any wireless networks around. I'm 100% sure my router is in range and that it is configured correctly. I have 5 other computers connect to this router along with some of them being ubuntu.

[Code]....

View 2 Replies View Related

OpenSUSE Wireless :: Get A Dual Band Cisco Ae1000 To Work With Fedora 15?

Jun 21, 2011

I can get a dual band cisco ae1000 to work with fedora 15, but the same steps taken on opensuse don't work. Has anyone managed to get this card working on opensuse 11.4 x64? If so, I've tried compiling a driver and using the repo for an rt3572sta. neither worked. The way i hacked the program (following a fedora forum) worked in fedora but not opensuse. I've tried blacklisting cards and making sure the module loads on boot.

View 1 Replies View Related

OpenSUSE Wireless :: Install Linksys WUSB600n Dual-band USB Wireless-N Adapter Onto A Desktop System With 11.1 Installed

Apr 27, 2009

I'm trying to install a Linksys WUSB600n dual-band USB wireless-N adapter onto a desktop system with opensuse 11.1 installed; this system will be migrating to a back porch with no cabling access, hence the wireless solution. Everything works fine under Windows XP, but on Linux, not so much. Hardware info is as follows; there is no "Wireless LAN" entry, but there is a USB entry:

99: udi = '/org/freedesktop/Hal/devices/usb_device_1737_71_noserial'
info.subsystem = 'usb_device'
usb_device.vendor = 'Linksys'
usb_device.bus_number = 1 (0x1)
linux.subsystem = 'usb'
usb_device.product = 'Dual-Band Wireless-N USB Network Adapter'
info.product = 'Dual-Band Wireless-N USB Network Adapter'
[Code]........

View 9 Replies View Related

Ubuntu :: Modeline For Vizio 32" TV?

Sep 10, 2010

I have an Nvidia GeForce 6150 integrated video card, and my TV is a Vizio VW32L. I installed the latest recommended driver from the Hardware Drivers. When I open the utility, I can select 1360x768, which is pretty close I thought. I selected this and hit apply, but it cuts off both the right and left side of the screen. For example, I can't see the Applications in the upper left corner. I went in to the TV menu and auto-adjusted, but it still cuts off both sides. I looked around the forums a bit and it sounds like I have to create a modeline. This is from my manual:
1366x768
60Hz
47.55 H.Freq (kHz)
59.81 V.Freq (Hz)
Positive H.Sync
Positive V.Sync
85.50 Pixel Freq (MHz)
I typed this in on http://xtiming.sourceforge.net/cgi-bin/xtiming.pl and got the modeline:Modeline "1360x768@60" 84.50 1360 1392 1712 1744 768 783 791 807

Can anybody verify these settings? Or am I going to screw up my TV? Also, I'm pretty new at this. Where in the xorg.conf file do I put this information?

I was looking at other threads and I think I have to add +HSync +Vsync to the end, because my manual says they're both positive, right?

View 2 Replies View Related

Ubuntu Multimedia :: Bars Not Visible At 1920x1080 On Vizio HDMI?

Feb 19, 2010

Im using a Vizio 22" 1080p LCD HDTV has a monitor for my Ubuntu server over HDMI. It works great, except I cannot see the top or bottom bar at any resolution. Id really like to get it working at 1920x1080. Ive been tinkering with the xorg.conf a bit to no avail.

View 5 Replies View Related

General :: Hook Qosmio Laptop Into Vizio Tv

Jul 23, 2010

I am trying to hook my qosmio laptop into my vizio tv. I am using a VGA cable and I run mandriva linux 2009.1.

Unfortunately I have no luck from here. I rebooted my computer and for the first time it offered to run drakroam, but when I accepted, nothing happened.

View 4 Replies View Related

General :: Dual WAN Router With DHCP Server?

Aug 16, 2010

I am trying to set up a DUAL WAN Load balancer on linux. All i want is just the dual wan loadbalancing and nothing else not even the firewall service. Also what would be the ideal configration for that system

View 2 Replies View Related

Ubuntu Multimedia :: Get 9.10 With A NVIDIA 7600gt 512mg And A VIZIO 42" LCD Screen?

Mar 5, 2010

I trying to get my Ubuntu 9.10 with a NVIDIA 7600gt 512mg and a VIZIO 42" LCD screen..Has anyone out there been able to get a 42" screen working with Ubuntu?

View 6 Replies View Related

Ubuntu :: 1080p Vizio Razor VM230XVT TV Stuck At 800x600 Resolution?

May 1, 2011

I am completely new to Ubuntu or any Linux based OS whatsoever, so excuse me if I sound retarded. I recently installed Xubuntu to an old laptop of mine and everything went fine except for the fact that I had to install a WiFi driver; I liked Xubuntu so much that I decided to go ahead and dual boot Ubuntu on my WIndows 7 machine. After I installed Ubuntu, I realized that I was stuck in 800x600 resolution and I was unable to run the resolution in 1920x1080 like I should be able to. I tried to uninstall and reinstall Ubuntu and I had the same thing happen. Most of the other help forums I had searched claimed that I needed to check my Xorg Config, but I don't know how to do that. Also, I get a "too many connections" message every time I start in Ubuntu; could this possibly be related?

[Code]...

Quick update: Ubuntu will not let me use the "extra visual effects" option for my desktop appearance. It stars searching for a driver then doesn't let me use the enhanced visuals. This leads me to believe that it's a driver issue. How can I tell which driver I am using in Ubuntu????

View 2 Replies View Related

Ubuntu Multimedia :: 9.10 On Acer Aspire Revo + NVidia ION LE + XBMC On Vizio L32HDTV - Title Bar And Taskbar Missing

Apr 22, 2010

when I connected to the L32 HDTV over the HDMI cable, picture came up, and I thought great, plug & play. But the title bar and taskbar were missing and I soon learned that this cheap Vizio TV has a native resolution of 1366x768 and simply upscales and chops off what it considers "overscan" when you drive it at the proper 720p 1280x720. To add to the problems, it doesn't report the correct EDID modes (look at your /var/log/Xorg.0.log to see the probes or install and use the read-edid package) so 1366x768 isn't an option out of the box. I spent days mucking around with /etc/X11/xorg.conf with custom Modelines, strange options and copying confs from other threads, trying to get it working at 1366x768 or 1360x768 or 1368x768 (some variations seem to work for some people)

In the end, I didn't have to touch xorg.conf at all =) All I had to do was install the newer NVIDIA 195 drivers!!! Then you get the lovely Overscan Compensation slider in nvidia-settings, and all is well. First, you will have to apt-get remove the old drivers (probably -185 or -180). Install apt-show-versions for an easy way to do that. I had a bunch of junk, I just removed all packages that had nvidia-someversionnumber in the package name.

[Code]...

View 5 Replies View Related

Ubuntu Networking :: Connect To Mobile Broad Band Using Terminal?

Oct 4, 2010

is there a command (set of) which i could use to connect my USB modem while in recovery mode?

what happened?

well, i tried installing Drivers for my ATI VGA and then uninstaled them (in order to install the edgers drivers). soon after the reboot i found out my key board n mouse is not recognized in GUI.

i found a little work around here

Quote:

That means that you do have keyboard in that mode & there are no seriously misconfigured packages. It's the 'netroot' menu selection & don't use 'sudo' in that mode as you are in a root shell. And while there, ensure that you have established a connection (ping [URL]), and then:

# ping ubuntu.com
[if this works, then proceed with the rest]
# apt-get update
# apt-get upgrade
# apt-get install -f

[Code]....

View 2 Replies View Related

Ubuntu :: Firefox And Facebook - Intermittent Black Band On Screen

Nov 26, 2010

On my wife's computer, she is having a problem that I can't duplicate on my own or figure out on hers. When she is logged into facebook, which she uses a fair amount to stay in contact with friends and family, after a certain amount of activity, clicking on links, etc. her screen develops an intermittent black band on the left hand side of the page which makes the page unreadable. This only happens in facebook and only with firefox; no problems so far in Opera or on other web sites. This happened in a previous installation and I thought a clean install would fix it, but I transferred her home directory and that brought the problem with it.

View 2 Replies View Related

Ubuntu :: Installing The Sify Broad Band Client On A Machine?

Mar 8, 2010

I have recently started using Ubuntu, i need help in installing the sify broad band client on my machine.

1) Where can i get the software for installing the client?

2) How do i install the client once i have installed the software?

View 2 Replies View Related

General :: Plot Band Structure Using Wien2k?

Sep 28, 2010

I want to plot band structure using Wien2k and for this I have to make a file named "case.klist_band". But I have a Rhomhedral compound . There is written to make the file using xcrysden but I donot know how to make the file from xcrysden.

View 2 Replies View Related

Ubuntu :: Connected HP Pav Laptop To Vizio TV - Displays Computer On Tv But Not On Laptop?

Jun 23, 2010

I connected my HP Pavillion laptop to a 1360x768 Vizio TV. On the TV it displays my laptop but on my laptop it has a black screen. How do I fix it so I can see my laptop screen on my laptop and on my TV at the same time?

I used to be able to do this with this TV as well as my friend's Samsung. I'm using a VGA connector. What should I do to have my laptop screen on my laptop and on my TV at the same time?

View 1 Replies View Related

Ubuntu :: Install - BOOT Into Windows On A Dual Boot Computer - Damn Wireless Router To Recognize?

Jan 6, 2011

it started with rooting my Motorola Droid. I got quite interested in the whole rooting/linux "world". The only problem is, my hands move A LOT faster than my brain does. I'm an "educated novice" at best when it comes to all of this and still learning slowly, but surely. I followed an online tutorial and before I realized quite what i'd done, I had dual installed Ubuntu linux 10.10 on my laptop. ISO'd this, partitioned that and realized....i'm in way over my head. Then I started researching how to just go back in time and get my "safe" windows vista back until I'm ready to make the switch to linux and just ended up getting more confused.

How do I actually BOOT into Windows on a dual boot computer that I apparently just created? How, if need be, do I undo everything I just did in the past few hours and careless tinkering? If I decide to stay with Linux, how do I get my damn wireless router to recognize?

View 9 Replies View Related

Ubuntu Multimedia :: FFMPEG Scaling - Get Some Weird Green Band At Bottom Of Frame In Converted Video

Jan 14, 2011

I've got a 1920x1080 video I've edited and rendered with Cinelerra, and I'm trying to use ffmpeg to transcode it to something smaller. However, when I use a command like this, for instance:

Code:

I inevitably get some weird green band at the bottom of the frame in the converted video. I know that there's some weird pixel stretching going on here, because the NTSC standard for 16:9 is 720x480 with rectangular pixels, and the 1080 version has square pixels, so I'm guessing the green band is an artifact of that process?

View 2 Replies View Related

Networking :: Install Broad Band Wireless Modem (netgear)ADSL2 On Fedora Core 7

Jul 29, 2010

how to install broad band wireless modem (netgear)ADSL2 on Fedora core 7

View 2 Replies View Related

OpenSUSE Network :: Setup A Wireless With Linksys Wireless Router And HP Laptop Dual Booting Vista & Suse 11.2

Jun 20, 2010

I'm try to setup a wireless network with my linksys wireless router and my HP laptop dual booting Vista & Suse 11.2. I have the vista networked, just fine. Where I can share files and the printer connected to my desktop. But I want to be able to use Suse in the same way, full time and to stray away from Vista. My wife and kids like easy. So I'm trying to transform them and show them something new.

View 9 Replies View Related

OpenSUSE Hardware :: Screen Moves To The Left, Leaves Black Band... But Mouse Is Working On Absolute Places?

Oct 22, 2010

I have a Dell Vostro 1220, with Intel 4 Series Express Chipset Family graphics card. I work on OpenSuse 11.3 (64bit), on the latest kde.I work on an extended 1680x1050 screen on the left of my laptop screen (1280x800). I set this with Kxrandr and it worked great,a while... Now, it shows a black band on the right side of my laptop screen. I can live with that. But the mouse does not recalculate for this difference, so that I need to click 1 inch to the right of where I want to click.

View 2 Replies View Related

OpenSUSE Multimedia :: Alsa Based Software Multi-band Graphic Audio Frequency Equalizer That Works With 11.x?

May 15, 2010

Does anyone know of an alsa based software multi-band (10 or more) graphic audio frequency equalizer that works with Suse 11.x? To be clear, I don't mean an equalizer within an audio or video player. One that can be used with any sound application, that works between the output of the player and the output plugs on a motherboard or sound card.

View 9 Replies View Related

Ubuntu Networking :: DLink ADSL Router As Main Router And The Belkin N1 As Repeater?

Apr 13, 2010

Because of the configuration of my house, I need two routers.I have a DLink ADSL router as my main router and the Belkin N1 as my repeater.I have set up the IP address in the Belkin to be 10.1.1.10 - my DLink is 10.1.1.1. I have disable the dhcp in the Belkin and set the DNS as ISP provided. [URL]..I have set the channel to 11 and in the Ubuntu Network Manger I have set the IPV4 to Link Local Only. I can see the Belkin and connect with my PC.but it will not take me through to the internet.

View 9 Replies View Related

Networking :: Setting Up Linux Box As IPv6 Router To Replace Netgear WNR1000 Wireless Router?

Jun 18, 2011

I want to set up a Linux box as a wireless router to replace our existing Netgear WNR1000 router, as I believe the Netgear does not support the coming IPv6 protocol. Unfortunately, it is not flashable with OpenWRT or DD-WRT presently.

As we have Comcast, our cable modem acts as a dumb modem according to the customer support guy I talked to, and our router is the one that asks for the IP address from DHCP. Thus, when Comcast switches over to IPv6, I don't believe my existing router would work, correct?

My idea is to take a Linux box and put two NICs and a wireless adapter in it, using IPCop or Smoothwall to set up a router. I could then enable IPv6 support for when we have IPv6 with Comcast. Is that possible? Would there be a way to get BIND to hand out private IP addresses in the same subnet on the both the LAN NIC and the wireless card?

View 1 Replies View Related

Networking :: Set Up A Laptop As A Router To Connect Wirelessly To ADSL Router?

Nov 6, 2009

I have a desktop PC running Ubuntu 9.10 and Windows 7, and a Eee PC 701 laptop running EasyPeasy Ubuntu 9.04. I'd like to connect the desktop to the laptop with a wired connection (eth0), then the laptop to my ADSL router using wireless (ath0).

I have a crossover ethernet cable (I bought on ebay). I have set up my laptop with a static IP address on my LAN and it uses OpenDNS.

I have added this to /etc/sysctl.conf on the laptop:

net.ipv4.ip_forward=1

Then I tried this on the laptop:

sudo iptables --table nat --append POSTROUTING --out-interface ath0 -j MASQUERADE
sudo iptables --append FORWARD --in-interface eth0 -j ACCEPT

This is a variation on what I found on other sites describing how to set up a router. I don't understand iptables very well, but I gather that the above two lines should set up forwarding so that traffic from my router to the laptop will be forwarded to the desktop, and vice versa.

But this doesn't work. The connection doesn't even establish between the laptop and the desktop.

View 12 Replies View Related

Networking :: Network Setup - Router - Wireless Router Card ?

Apr 24, 2010

I'm having trouble getting my network set up the way that I want it/had it. You see, when I first set up my network, I just had my cable modem going directly to my standard wired router (A D-Link DI-604), which had DHCP,and was connected to all of the computers on my network. I had one switch hooked up to one of the ports of the router, but this was a regular switch, and it would not try to assign IP addresses, it would just pass through the DHCP info as I wanted.

Now however, my network setup has changed. My room mate and I both got laptops, and we decided that we wanted to have wireless access so we didn't have to constantly plug in to the router.

Now my network is set up like this: The modem is hooked up to the router(DI-604), which is hooked up on the LAN side to our computers, our switch (which is hooked up to 3 more computers), and to a wireless router card (A Gigabyte GN-BC01).

The wireless router card has two jacks for ethernet. One for WAN, and one for LAN. The LAN side we have plugged only into the computer in which the card is installed.

Now the problem is this: The wireless router card comes with DHCP by default, and it's assigning addresses to the laptops and to the computer hat it's in, and worse, the IP addresses are on a different subnet than that of the main dlink router. The Main (dlink) router assigns addresses from 192.168.0.1 (itself) to 192.168.0.254, while the wireless router card assigns addresses from 192.168.1.1 to 192.168.1.254 (itself).

Because of this, I cannot access services on the wireless network from my wired network or vice versa. The first thing I tried was setting the card to assign addresses from 192.168.0.12 to 192.168.0.253, however it just said "internal error" when I tried to do this. I decided that this may be because it sees that it was being assigned an address on it's WAN side on the same subnet. So the next thing I tried was disabling DHCP and setting the "LAN IP Address" to 192.168.0.12, hoping that the DHCP would just go through the card, like a switch. I would have set the LAN IP address to be assigned by DHCP, but this was not an option, so I decided that'd be the best thing to set it to.

Once again however, setting the LAN ip address to an address on the same subnet as that of the IP assigned to it's WAN side caused it to report an "internal error". I verified that this was the issue by setting the LAN address to several other private IP addresses to test (I.E. 10.0.0.1, 192.168.3.1, 192.168.5.12).

My question then really is: How do I set up both routers so that I can access services and computers from each network from the other network. Should I set them with different subnets and set the gateway on the wireless network to the main router? To the wireless router card? Should I put them on the same subnet? Will it know how to communicate?

Here is a link to (picture) my network diagram. Network Diagram

View 2 Replies View Related

General :: Laptop As Router Between Wireless Router And Windows 7 Box

Aug 7, 2010

I'm using a cross-over ethernet cable to connect a Desktop Windows 7 box, and a laptop running on SUSE 11.2. I want Windows to connect to the internet via the laptop's wireless interface.

View 1 Replies View Related

Networking :: Linux As A Router / Bring 147 & 148 IP Online Without Router?

Mar 26, 2009

These r IP provided by my ISP that i've put on Fedora 8:

WAN IP:xxx.xxx.xxx.17 (eth0)
Subnet:255.255.255.252
Gateway:xxx.xxx.xxx.18

Valid static(public) IP set of 2:
IP:xxx.xxx.xxx.147 & 148 (eth1, eth2)
Subnet:255.255.255.240

i want to run xxx.xxx.xxx.147 as a web server & xxx.xxx.xxx.148 as a ftp server. but I'm able to ping only xxx.xxx.xxx.17(WAN IP) from outside world. Can any1 tell me that how can i bring my 147 & 148 IP online without router.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved