Ubuntu :: Installing The Sify Broad Band Client On A Machine?
Mar 8, 2010
I have recently started using Ubuntu, i need help in installing the sify broad band client on my machine.
1) Where can i get the software for installing the client?
2) How do i install the client once i have installed the software?
View 2 Replies
ADVERTISEMENT
Oct 4, 2010
is there a command (set of) which i could use to connect my USB modem while in recovery mode?
what happened?
well, i tried installing Drivers for my ATI VGA and then uninstaled them (in order to install the edgers drivers). soon after the reboot i found out my key board n mouse is not recognized in GUI.
i found a little work around here
Quote:
That means that you do have keyboard in that mode & there are no seriously misconfigured packages. It's the 'netroot' menu selection & don't use 'sudo' in that mode as you are in a root shell. And while there, ensure that you have established a connection (ping [URL]), and then:
# ping ubuntu.com
[if this works, then proceed with the rest]
# apt-get update
# apt-get upgrade
# apt-get install -f
[Code]....
View 2 Replies
View Related
Feb 17, 2011
sometimes our ADSL connection gives up and we are left without internet connection for days until the problem gets fixed. I mean by this problem along the phone line. It affects all machines that connect to the internet through a Netgear WIFI Modem Router. I recently tried an alternative when this happens is to use a USB Huawei Mobile Broadband UMTS connection which works when you insert it in 1 laptop. Is there a way i could get the Netgear WIFI modem router to connect on that usb stick or PC that is online on that usb stick and give access to other machines that will want to connect to the web ?
View 4 Replies
View Related
Jul 29, 2010
how to install broad band wireless modem (netgear)ADSL2 on Fedora core 7
View 2 Replies
View Related
Jun 14, 2010
I use ubuntu 9.10 karmix (x86).. My ISP is sify broadband..I installed their broadband client and was using it for quiet a while.every time when i have to connect to network i have to type a command in the terminal :code :sudo sifyconnectto execute the binary file which is bundled with the client the ISP provides..but recentely it has started to behave strangely.. i get an error like this:
code:
prakash@prakash-laptop:~/ sudo sifyconnect
Checking reachability of Sify Server... : Success
[code]...
View 3 Replies
View Related
Jul 31, 2010
I have several (say, 50) machines running ubuntu.I want them to be centrally controlled.That is, each machine should get permit from central machine before installing any software etc.I googled quite a lot but could not find the solution...
View 1 Replies
View Related
Dec 13, 2010
I have a number of Ubuntu machines running. Our NAS is FreeNAS. I am typing this on an Ubuntu 10.04 desktop that is successfully connects to an NFS share on the FreeNAS box every day. In addition, we have 3 10.04 server machines that also stay connected to the share successfully, Yesterday, I installed a new 10.04 server machine using IP 192.168.0.11. Everything works except connecting to the NFS share. It always returns with: mount.nfs: mount to NFS server '192.168.0.13:/mnt/amrd0s2/public-NFS' failed: timed out, giving up
Here's what I have checked: I can ping 192.168.0.13 (obviously) The NFS export mask is set to 192.168.0.0/16. The other machines are all on the same subnet as this problem machine (192.168.0.*) nfs-common, nfs-client, and portmap are all installed and running correctly. portmap is running correctly showmount -e 192.168.0.13 give the proper response:
Export list for 192.168.0.13: /mnt/amrd0s2/public-NFS/ 192.168.0.0 iptables isn't even installed (these machines are segregated in a private network behind a hardware fire all) There is nothing related to NFS is any of the syslogs. dmesg has one entry: [6.025966] FS-Cache: Netfs 'nfs' registered for caching which is insignificant. how to at least debug the nfs-client short of downloading the source and actually stepping through the code.
View 1 Replies
View Related
May 30, 2010
I have RHEL 4 U7 installed on 4 machines, with approximately same configuration. yesterday i was trying to set up public key authentication for ssh on them to be able to run some automated jobs but i had a problem with one particular machine: when used as an ssh client to access the other 3, it kept prompting for a password. the configuration worked on the other 3, they can be accessed from each other with no problem. they can also access machine 1 - the one that has the ssh client problem - too with public key authentication.
When i run ssh -vv on machine one i get the following output :
Code:
This is my machine 1's ssh_config file:
Code:
View 14 Replies
View Related
Aug 22, 2010
I have been using Broadcam Wi-Fi cards for years and always have problems getting them to work well with Linux. Not too long ago ( 6 months) I replaced my broadcom card with an Intel Pro/Wireless 4965 card. Wi-fi is 1000% better now. Connects very well and well connect to systems that I could not ever see before. So I said get an Intel card and toss your Broadcom card away and start demanding that your next computer have an Intel card as these cards have native support in the Linux kernel.
View 3 Replies
View Related
Mar 2, 2010
I was wondering how can I rdp to a Linux machine from a windows client.
View 2 Replies
View Related
Jan 2, 2011
I am connecting to linux server(RHEL4.7) using putty from my windows machine. Is there any way to get the ip address of my windows machine using C program in linux.
View 9 Replies
View Related
Dec 17, 2009
how I can start NX-Client on a Linux-machine? [URL]... But here is nothing how can I start this tool? Only for windows.
View 5 Replies
View Related
Jul 21, 2010
I dug up an old P2 machine and loaded it with 320MB of RAM and a cheap BIOS-less RAID card using a VT6421 chipset. I attached a 1TB SATA HDD to it and booted it up with the latest gentoo minimal install disk. I have installed gentoo before. The first problem I had is that the system would hang at Scanning for sata_via.... I resolved this by booting with "nosata." This brings me to my first question: Will I be able to use my drive once the OS is installed? It seems like the answer would be yes, but I wanted to make sure.
After booting with the 'nosata' option the system would hang at scanning for pata_qdi.... I resolved this by booting with 'noload=pata_qdi.' Now the system is hanging at: attempting to mount media:- /dev/hdc I have been searching but have not found anything definate on this one. One post ( i am sorry but i forget where; i was working on this for hours) suggested that the problem is caused by the age and speed of the drive. I really don't know much about these things. Can anyone confirm this? Is there a way to make it work, or do I have to replace the drive? If I replaced the drive won't the new one just slow down to accomodate the old motherboard?
View 1 Replies
View Related
Jun 3, 2010
I'd like to access a samba/SSH server which itself is connected to a VPN Server, therefore acting as a VPN Client. As soon as the VPN Connection is established, samba and ssh connections to this VPN Client get a timeout. But not all of them.
To get a better understanding I made an overview. The first one is a general network overview, without any VPN Connection, the second one with the VPN Connection established.
Network Overview without VPN
I can access the server in several ways:
*From the router via ssh (router runs ipcop with busybox)
*From the laptop via ssh (putty via Windows 7)
*From the laptop via samba
*From the internet via ssh (port forwarding to the ssh server)
Everything is working as it should.
Now the server that runs ssh and samba service connects to a VPN Server on the Internet, this is also working fine. Now it gets weird. The only samba/SSH connection that is still working is ssh directly from the router to the server. Everything else gets a timeout:
*From the laptop via ssh (putty via Windows 7)
*From the laptop via samba
*From the internet via ssh (port forwarding to the ssh server)
Network Overview with VPN active
Why is that? It seems from the little understanding I have of vpn and networking, that incoming packages (like samba request from the laptop) don't get send directly back over eth0 but over the vpn connection. This seems somewhat logic, BUT ssh from the router is still working. Why from the router and not from the laptop? I really can't get my head around it.
Configuration Overview
tldr; One Client acts as VPN Client and samba/SSH Server. As soon as the VPN Connection is established samba/SSH stop working, but only partially.
View 1 Replies
View Related
Jan 14, 2010
I have a Fedora 11 Server which act like a Internet gateway for our LAN. I have my own iptables andt squid. We daily starts up & shuts down the server. Since last few days I am facing a unique problem. When we starts the server we are able to brows the Internet on the Server but from the client machine we are unable to do so but we can ping any internet sites/Static IP from the Client machines. After 2-5 times of startup and shutdown of the Server. We are able to browse internet from the client machine.
View 2 Replies
View Related
Jan 13, 2010
I've just set up NIS on my home network (probably not necessary on this scale, but I wanted to try it out). The server and the clients are all running Debian Lenny. I've got it up and running and have my NIS users on the server logging into graphical desktops on a client machine.My problem is this: The users cannot access a lot of services that are native to the client because they're not members of the right groups (for example, they have no sound because they're not members of the audio group). I figured it would be easy; just add users to groups with the usermod command but the response I get is that the user in question is not present in /etc/passwd. If I understand NIS correctly I'm not supposed to add my users to /etc/passwd on the client machines.
View 7 Replies
View Related
Aug 19, 2010
whenever i execute ls -ltr i get following entry. But there is no such user as 501 .What is the issue.
[Code]....
The problem is this folder is mouted on client machine using nfs.But after mouting client machine get hang when i run df -h.
View 2 Replies
View Related
Apr 14, 2009
I am using VNC to login to remote machine (vncserver). My question is; How can I login to remote machine (vncserver) through VNC client, without having to login to vncserver first physical. For better explanation here is an example: If john wnat to login to vncserver remotely first he has to login the vncserver physically then he can login remotely.
View 5 Replies
View Related
Feb 9, 2010
i have installed nfs server on my redhat machine.when i want to mount shared data from client(suse)machine the following error occur. "mount.nfs: mount to NFS server '10.3.31.146:/home/usbtest' failed: System Error: No route to host" both machines ping each other successfully.
View 1 Replies
View Related
Nov 30, 2010
If I go to "Alter channel subscriptions" page of a VM, I do not see any channels to subscribe. It just shows "None (Disable service)". On the same time, I'm getting the following errors in Apache error log and rhn_server_xmlrpc.log
[code]...
View 1 Replies
View Related
Aug 10, 2009
When DNS server is configured on Windows server, it will automatically detect and catch computer names and IP address. With Linux (BIND), I have to enter each clients manual under zone file. example (computer1 IN A 10.10.1.4). is there anyway to make Linux detect client automatically as windows does?
View 6 Replies
View Related
Jun 16, 2009
I have a 11.1 NFS server and several 11.1 NFS clients. If for some reason the server shuts down before the clients then the clients become almost frozen, particularly KDE is rendered useless even after cycling back to init 3 then init 5. I would like to make the clients immune to shutdowns on the server.
View 3 Replies
View Related
Sep 28, 2010
Have a pureftp server on OpenSuse 11.2 (x86-64 bit), KDE 4.3.5, dual core AMD. It responds to ftp clients on another machine (openSuse 11.1) within the same subnet (192.168....) and delivers lists of directories, changes directories, etc. The clients (gftp, jftp, filezilla, dolphin--tried them all) are unable to upload to the server (after a successful log-in on the server as a user, not root) with an error message that seems to indicate an inability to open the file on the client machine. Also logged in as user on the client machine. From FileZilla:
Command:STOR FCtinyLogo2.jpg
Response:553-Can't open that file: Permission denied
Response:553 Rename/move failure: No such file or directory
What am I missing in permissions? The directory where the JPG is located belongs to the user who is signed in, its in his home directory. The users on the two machines are not the same.
View 1 Replies
View Related
Nov 1, 2010
i hav configure dhcp server. but the ip is not getting assigned to my client machine.
View 3 Replies
View Related
Dec 14, 2010
I have set samba domain. I am able to add win 7 and xp clients. All r working fine. But I have a doubt. If I shutdown the samba pdc server, I should be able to login the client machine with the same profile (which I had, when the samba pdc server was up). Now , if I shutdown the sambapdc, I am able to login the client machine, but new profile is being created. How to avoid this.
How to say to samba that the client machine should load the same profile which was created when the server was up and running. I do not want the client machines to create new a profile when the server is down bcoz in windows domain, when the windows domain is shutdown, the client machines are able to login with the same profile (the profile which was created when the domain was up). I wish to have same thing in samba pdc also.
View 2 Replies
View Related
Aug 1, 2010
How to give nfs share access to only particular user at client machine.
View 1 Replies
View Related
Jun 5, 2009
I have configured LDAP Server on RHEL 5.2 successfully and client can login to the server. But I do no how a client can change its LDAP password on his client machine.
View 5 Replies
View Related
Oct 15, 2010
Running Ubuntu 10.04 to 10.04 over LAN; I can SSH -X into my server just fine, and am able to launch various applications (Nautilus, Gnome-Terminal, Disk Utility, etc) but I'd really like a Gnome desktop. When I've tried the various StartX commands and gnome-session, but something just isn't clicking. Is there a way to have a 'second' Gnome session running on the client over the first?
To pre-empt some obvious solutions; I don't wish to use VNC, the lag drives me nuts, and I'd like to keep my gnome session running on the client machine if possible. If it's not possible, that's fine; it just seems like there'd be a way to do it?
View 1 Replies
View Related
Feb 3, 2011
I am using the vizio dual band and it is working quite well with one exception. i can not get it to access the usb network media.( hard drive plugged into usb port on router) it does recognize the the drive being there, it just will not allow me to access it. when i click on it nothing happens.
View 1 Replies
View Related
Jun 15, 2010
As you may notice, the client computer of which the mkahawa client package is installed is inside virtual box(guest OS) with the user account name pc004 and with the static LAN ip of 192.168.1.4 then the server(host OS) is 192.168.1.2. The program installation says 0% but detail informs successfully installed. Nothing happens after and very confusing
View 1 Replies
View Related