Ubuntu :: Connected HP Pav Laptop To Vizio TV - Displays Computer On Tv But Not On Laptop?
Jun 23, 2010
I connected my HP Pavillion laptop to a 1360x768 Vizio TV. On the TV it displays my laptop but on my laptop it has a black screen. How do I fix it so I can see my laptop screen on my laptop and on my TV at the same time?
I used to be able to do this with this TV as well as my friend's Samsung. I'm using a VGA connector. What should I do to have my laptop screen on my laptop and on my TV at the same time?
View 1 Replies
ADVERTISEMENT
Sep 15, 2011
I dug up an old pentium 3 computer to play with. I have it connected to my laptop with an ethernet cable. Now, how do I access the files, install new OS, etc, etc? If it helps any, I think it runs windows 2000 and I'm on opensuse 11.3.
View 9 Replies
View Related
Jul 23, 2010
I am trying to hook my qosmio laptop into my vizio tv. I am using a VGA cable and I run mandriva linux 2009.1.
Unfortunately I have no luck from here. I rebooted my computer and for the first time it offered to run drakroam, but when I accepted, nothing happened.
View 4 Replies
View Related
May 14, 2010
I am running ubuntu 9.10, on a Lenovo laptop. Has been working perfectly until now. But now my screen is split into 6 very small screens which all work in synch. That is - I have 6 mouse pointers - it is really like having 6 very small screens. All software is still working. However - I need to go back to only one screen in full-size. Has anyone ever experienced this. Using Nvidia accelerated graphics driver.
View 4 Replies
View Related
May 24, 2011
Whenever I use the function hibernate or sleep - or just generally close my lid on my laptop, my laptop displays a black screen when I open the lid again - though it is turned on.
Basically, it hibernates/sleeps the laptop when I close the lid. When I open the lid though, it turns on the laptop, but brings me a black screen.
Code:
View 3 Replies
View Related
Sep 11, 2010
I've been struggling trying to get a Lenovo T410 to display video on both it's internal LCD and an external display at the same time, and I need to get it working by Monday or I'm toast. know this will work with other distros, but we are contractually bound to use RHEL5.If we use the laptop on it's own there is no problem, however once we set it in the docking station, the external display shows no video, unless it is rebooted. Then it will only display video on the external and not the laptops own display.
Our engineers are constantly going to meetings and need to be able to undock the laptop and have the display appear without having to reboot. Then conversely, return to their desks and have the video on the external display without rebooting.I suspect that the problem is that RHEL5 is only up to release X11R7.1 of X.Org, which is still using version 1.1 of RandR and from what I can surmise, 1.1 of RandR does not recognize multiple video outputs.I was hoping that someone more knowledgeablthan I can confirm this and if I'm right do I need to manually build the latest release of X.Org to get this to work
View 5 Replies
View Related
Jun 4, 2010
I am relatively new to Ubuntu, and Linux, and I am having a problem with it that I was hoping to get fixed. Whenever I try to connect to my home wi-fi network, on Ubuntu 10.04 Lucid Lynx, it keeps disconnecting and reconnecting...which makes it really hard to download various things. It works just fine whenever I used "shudders" Windows Vista but whenever I try to use it on Ubuntu, it won't work properly. The router I bought, to replace my old, broken one, was Linux compatible, or at least that's what it was advertised as. The laptop is an HP G70 and the method I used to download Ubuntu was the Windows Installer.
View 1 Replies
View Related
Jul 16, 2010
I have connected to the VGA output of my laptop a 19" monitor. I setted in Ubuntu the resolution for that monitor to 1280x1024.
Two days ago i connected the laptop to a projector. When Ubuntu detected the projector it ask me for my user password to change "i dont know what".
After using the projector I have connected the laptop to the 19" monitor again. Now I can not set the resolution for the monitor to 1280x1024 (that resolution doesn't appear in the list)....
View 6 Replies
View Related
Jul 9, 2011
I have an Ubuntu laptop connected by wifi to a Cisco router and a desktopUbuntu PC conneted by wire to the same router. I would like, if it's possible to connect them without using the Internet (I mean what I want it's not just communicate between them using SSH over the Internet, for instance, but also communicate without connecting to the Internet). My DSL connection it's 4 Mb/s while my router can work up to 100 Mb/s so I would like to take advantage of these 100 Mb/s to transfer files between the two computers instead of using 4 MB/s
View 5 Replies
View Related
Aug 1, 2011
I have a problem when I boot up my laptop and my battery is not connected. You can not hear audio from your headset. But when the battery is connected when you start up the system, the headset works.ACER ASPIRE 4750gi have followed this instruction:
Code:
wget[URL]-O alsa-info.sh && bash alsa-info.sh
and here is my
Uploaded Data.
View 2 Replies
View Related
May 23, 2010
I'm all new to Opensuse, but I've used Ubuntu before, I am having some issues with my wireless on Opensuse, the laptop is connected and the WEP key is correct and in the system information it says I'm online! However the internet does not work, I know the internet is online as my main Desktop Pc (Running Windows 7 64bit) which I'm typing this on, is connected to the internet!
View 2 Replies
View Related
Oct 19, 2010
I installed slackware 13.1 lately to a laptop. its a toshiba satellite m40 185 if it makes any difference. In any case, and while the touchpad works flawlessly, connecting a standard USB mouse to the pc does not power up the mouse (its a microsoft notebook optical mouse) and of course the mouse pointer does not follow the mouse's moves... no clicks either.
Basically when I do
Quote:
I don't see junk printed on my terminal, whereas moving around the touchpad I do see some.
Just to clarify, It's not just X that is not working, gpm doesn't get mouse moves from the usb mouse either (touchscreen works flawlessly in console too).
my xorg.conf looks like:
Quote:
I added the last 2 options after following this guide, which seems to cover concurrent read-in from more than 1 pointing devices.
All the other guides I found assume that you have a working gpm.
One question is: since with the new radeon drivers the xorg.conf file can be missing altogether and X will not cry, does it make any difference to add mouse options in xorg.conf?
Continuing my thought: it must be something else. Kernel doesn't seem to be the problem. The USB subsystem works since usb mass storage devices (that's all I have sitting around) are sensed by the kernel and udev properly. Additionally, the problem persists with the huge kernel.
Before slackware, I used to run fedora on the laptop and both pointing devices worked properly, however I think fedora uses another method of setting up the X server devices..
View 4 Replies
View Related
Oct 28, 2009
Im using Ubuntu 9.04 in my acer aspire 6930 laptop. Inbuilt speakers in my laptop is working, however the external or surround speaker system say 2.1 connected to my laptop is not working.. i just want to know possible solutions for this challenge..
View 4 Replies
View Related
Jul 14, 2010
This may be more suited for the networking forums, but I figured Community Cafe would be well rounded enough for someone to tell me if this is even possible (with minimal configuration that is).There are a few places I travel where I only have a wired connection to the Internet (no wifi), but when this happens is there a simple way to create an adhoc network so wireless devices can route through my computer and to the network? Reason I'm asking is I'm thinking of getting an iPad or iPod Touch which have wireless connections, but in the cases where my laptop is using a wired ethernet connection and the wireless card isn't used, I'd like to create an adhoc wireless network that'll let such wireless devices work.
View 4 Replies
View Related
Jan 2, 2010
I have a netbook (Acer Aspire One) I'm running Slackware 13. and usually, I prefer to connect an external monitor. When I switch my machine on with the monitor connected, the display is duplicated on both screens and since I just want the netbook's screen to be off and only see the display on the external monitor, I can doxrandr --output LVDS --off
Great! However, it's a hassle to do this every time I log in and I'd like to automate the process if possible. I did some googling and I found that if you want to automate xrandr commands, you can put a script in /etc/X11/Xsession.d/ (see this). I wrote the following script to automate my xrandr commands and since the Xsession.d directory didn't exist, I tried creating it. The script was called 45custom-xrandr_settings, as the one on the RandR wiki is called the same.
Code:
#!/bin/bash
# Check whether the external monitor is connected
[code]...
View 5 Replies
View Related
Mar 2, 2010
I was transferring some files from my external USB hard drive onto my laptop (running 64bit Karmic), and my laptop froze up for whatever reason.Everything on the screen stopped and the Scroll Lock and Caps Lock LEDs began flashing.Not knowing anything else to do, I hard booted off with the power switch.At this point, I was concerned if anything on either hard rive would be damagedI booted my laptop back up, and all seemed well until I trued to open my Documents folder.For some reason, Ubuntu will no longer open any folders at allI can't click on ComputerDocuments, Music, etc. When I do, a tab opens in the taskbar that says Opening folder. It stays on screen for about 20 seconds, and then goes away and the folder never opens.The weird part is if I open gEdit and try to load a file, I can see and get to everything.
View 4 Replies
View Related
Apr 15, 2011
I have installed Ubuntu (both 10.10 and 11.04 pre-release) on my laptop but my battery is not recognized and it is detected as a desktop system rather than a laptop. I have tried the cat /proc/acpi/battery/BAT1/state method but the directory doesn't exist. I have tried another guide to paste the battery info into this directory but it doesn't allow me to do that and says that the directory doesn't exist, even though I'm trying to make it. I tried it in root nautilus and even on an install of Lubuntu (with a root file manager) but it still failed to budge. I really don't know what to do as I have tried all the guides on the internet that I could find.
View 4 Replies
View Related
Feb 23, 2010
I have an old computer I have set Ubuntu up on to use it to learn about web services, networking and sys admin.As a first step I have installed the LAMP packages successfully. I want to reach my ubuntu computer from my laptop through my home wireless setup.
On the server I open a browser put this in the address bar and get to the "It works!" page so assume its correct.I go to my laptop, put the same number in the browser and am told that there's a problem loading that page.I figure ok, could be security or ports or something so i ping it to see if it work on that level and it doesn't.I go to my laptop, get the ip for it and then try to ping from ubuntu to my laptop - that doesn't work either.Pinging the router from both computers works fine though.What do I do now?
View 4 Replies
View Related
May 15, 2010
When I change the "When laptop lid is closed" option in Gnome Power Manager to either "Blank Screen" or "Do Nothing" (by manually using gconf-editor), the screen itself doesn't turn off when the lid is closed. Obviously not a huge deal, as I could just change the "idle before sleep" on certain occasions, but I liked that setting it to "Do Nothing" previously would actually turn off the screen when the lid was closed.
View 1 Replies
View Related
Sep 15, 2010
I am a brand user. I have both a desktop and a laptop computers. When i get a workspace switcher preferences window from my desktop I can put names in the switcher buttons. This same window from my laptop will only let me add or delete buttons. How can I get names in my switcher buttons on my laptop computer?
View 1 Replies
View Related
Mar 14, 2011
I am trying to transfer a lot of data from my laptop to my computer. Both are running Ubuntu 10.04 and both have Samba installed, and folders are setup for sharing. The laptop has a 56Mbps Wireless G built in module, and the computer has a Airlink AWLL6075 Wireless N USB Adapter 300Mbps. (I got the USB adapter working with the internet, since there was an issue with it just working out the box)
I have a wireless network, since wired is out of the question. The router is a Belkin Play N600 HD if that makes any difference. When i try to transfer the files across the speed of the transfer maxes out at about 785 Kbps (My Internet speed is 7Mbps=875 KB/s). It seems that the file is being sent to the router and then the internet and back to the router and then my computer.
I figure that bottleneck is my Laptop at 56Mbps, but that still gives a theoretical max of 7MB/s even at a low connection/link counting it at 24Mbps would still be 3MB/s. I even tried making a wireless Ad-Hoc network to transfer the files but when i went to Network it wouldn't show any shares.
I'm missing something to make it go faster and i really can't figure out what it is, maybe because I am too close to it.
View 1 Replies
View Related
Apr 22, 2010
So what I'm doing right now is I have my laptop connected through my wireless internet (Ubuntu 9.10), and I have a Xubuntu 9.10 Desktop right next to it with an ethernet cable going from my laptop to the desktop. Right now it says it's connected, but I can't connect to the internet. What I've done is I've gone on both computers and edited the settings for eth0 to share with computers, and I've even gone into the wireless settings on my laptop and edited it so Ivpc 4 setting's method was set to share with computers. I downloaded the bridge utility on my laptop but I don't know what to do with it exactly.
So here's the setup I've got going.
Wireless Router ----->Laptop -------->ehternet cable ---------> desktop computer.
View 3 Replies
View Related
Dec 5, 2010
I have a Dell Latitude D505. I installed Squeeze on 12 November 2011 from the weekly DVD. I install updates every day, when available.
My kernel: 2.6.32-5-686 #1 SMP Thu Nov 25 18:43:34 UTC 2010 i686 GNU/Linux
Everything is working fine except the button that is pressed when I close my lid. Hibernate works, Suspend works, blank screen works. user is member of the group "powerdev". I really thought thread "closing-laptop-lid-renders-computer-unusable-786822" would bring me a solution. When I close my lid my screens turns black with my mouse cursor on it. Connections with ssh are broken. Keyboard is dead, mouse pad too. It looks like it never start any software it just hangs immediately. I cant find anything in my logs.
View 5 Replies
View Related
Aug 30, 2010
How do I scan a windows computer from my Ubuntu laptop via the network? I have Ubuntu 10.04 on my laptop. First Windows computer to scan has Windows XP Home Edition Second Windows computer to scan has Windows Vista Home Basic I have Avast 4 workstation and KlamAV insalled on it. What is the steps to make my computer scan those windows computers. And how do I set up my firewall to work with firefox and empathy?
View 5 Replies
View Related
Sep 21, 2010
What is a good MTA (e.g. Postfix or something else) setup for a home computer behind a NAT, or a laptop that is not always online? I've read a lot of Postfix tutorials on how to set it up this way or that, but they are usually geared towards computers that are servers ie they
have a static IP
have a domain name
are always connected to the same network
My requirements are, I guess: Ability to redirect mail for local users to another server of my choosing. No listening for incoming SMTP connections - outgoing only Ability to route outgoing mail via an external SMTP server with authentication (and perhaps encryption) If not Postfix, I need an MTA which can queue up mails in case it temporarily has no internet connection.
View 4 Replies
View Related
Feb 20, 2011
I have two network cards in my computer (Debian). One (eth0) is connected to the router which is connected to the internet, the other one (eth1) is connected to my laptop (Gentoo). Now I want to surf the web both on my computer and on my laptop. I obeyed some tutorials "Linux as router":
1. On my Debian system IP-Forwarding is on:
Code:
takada:/home/sam# sysctl net.ipv4.ip_forward
net.ipv4.ip_forward = 1
2. Laptop has IP 192.168.0.2 and this is the output of 'cat /etc/network/interfaces' on my computer:
Code:
takada:/etc/network# cat interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
But a ping from my laptop to 192.168.1.1 (router to internet) still gives:
Code:
connect: Network is unreachable
View 4 Replies
View Related
Mar 30, 2011
ive installed ubuntu for netbook on my laptop, everything went fine, it installed ok, and it was all good, until i tried clicking on the icon im supposed to click on to get conncected to wifi. where it's supposed to have various wireless networks it says "device not ready (firmware missing)" and ive tried everything i can think of to get it working, but it wont work. the same thing happens with my desktop computer, but with ubuntu desktop 10.10 and linux mint... but with the desktop, its probably just a case of finding drivers for my specific wireless adapter, in which case can anyone tell me where i can find the driver for a belkin F6D4050ea for linux?
View 1 Replies
View Related
Jan 7, 2011
my laptop, which i run ubuntu on, is getting a bit old and i find it's getting slower and slower at running applications. My desktop computer is stronger, but I can't give up on the portability of my laptop.I was thinking of installing a HD drawer for both my laptop and desktop. and when I come home just pull the HD from the laptop and plug it into the desktop.
View 1 Replies
View Related
Feb 3, 2010
I am currently running squeeze with the 2.6.32-trunk amd64 kernel.
If I close the laptop lid the screen will not turn back on and the laptop becomes unresponsive. The only way to get it functioning again is to hold the power button down until it dies.
View 9 Replies
View Related
May 25, 2010
i just installed fedora on my dell studio 1537 laptop, which has a broadcom 4322 for wifi, but the device isn't showing up and i can't get online with that computer.
View 14 Replies
View Related
