Hardware :: Nvidia MCP61 Chipset Variant + Alsa-base.conf?
Jul 24, 2010
Just wondering if anyone could tell me how the models in alsa-base.conf ( see model list here )are configured. My issue is: My volume is extremely low. I have tried telling alsa to load profile for 3stack and 6stack configurations. However, most of the models listed for acer seem to be laptops. In my case I am running a ACER aspire ASE380 I have tried a few of the acer model listings with moderate success. My system is running ALC888 ( is it possible that its being identified incorrectly by the system? ) with 6 analog stack + 1 optic + 1 coax + 1 front mic + 1 front head-phone. I am wondering how the models differ from each other in the conf files. Can any one tell me where to look?
View 7 Replies
ADVERTISEMENT
Mar 31, 2011
Get The Nvidia mcp61 Audio Chipset Working With 64 Bit? Because I'd really like to know
View 8 Replies
View Related
Jan 26, 2010
I recently installed ubuntu 9.10, today actually, and I can't seem to make the audio work. I read a lot of threads, but no luck with this..
View 7 Replies
View Related
Jun 13, 2010
how to detected sound card or drivers.when i am trying to detect sound card by using command system-config-soundcard it gives output on gui mode (Audio Configuration) but there is nothing show on PCM device. System Configuration which i am using.
#uname -a
Linux *** 2.6.18-8.el5 #1 SMP Thu Mar 15 19:46:53 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux
#lspci
00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
[code]....
View 3 Replies
View Related
May 3, 2011
This morning i ran this command to check installed alsa-driver.
Code:
ari@Natty:~$ cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.23.
It says 1.0.23 version of alsa driver.
But when I check alsa-base package it tells different version.
Code:
ari@Natty:~$ dpkg --status alsa-base
Package: alsa-base
Status: install ok installed
Priority: optional
Section: sound
[Code]...
View 1 Replies
View Related
Feb 18, 2011
I haven't any idea what drivers I should get from the repositories! I just want to play games. My chipset is NVidia GeoForse 6150SSE. I also don't know if the chipset handles sound and what I need for gaming.
View 6 Replies
View Related
Sep 19, 2015
I've often installed Debian Netinstall and added the nVidia driver for my monitors. I just purchased a new PC that has this as part of its description:AMD A4-5000 APU with Radeon(TM) HD Graphics..I have monitors connected to both its analog and digital outputs. Larger distros have enabled a good video driver automatically, but I need to know how to do this for my Debian Netinstall partition. The video performance is horribly slow right now.
View 2 Replies
View Related
Jan 28, 2016
I am trying to install OpenCL on Debian Jessie with a Nvidia chipset. I have installed: nvidia-libopencl1, nvidia-opencl-icd and opencl-headers based on a website instruction. When I run a test program it DOES FIND libOpenCL.so.1 ...... but does NOT FIND libOpenCL nor libOpenCL.so
View 2 Replies
View Related
Feb 11, 2011
I need to either force a redetection of my hardware or get the system to use the specific piece of hardware it is no longer using.
Details
Fedora 12
NVidia chipset/audio controller
Modprobe details of device "nVidia Corporation MCP79 High Definition Audio"
Tried installing kudzu but it does not install....
View 1 Replies
View Related
Dec 2, 2009
I am a recruit for Linux and install FC12 on my PC. The motherboard is ASUS M3N78-CM. The nvidia GeForce 8200 chipset on the motherboard is directlt used for vedio. The driver : NVIDIA-Linux-x86_64-190.42-pkg2.run is downloaded from Nvidia website, but it can't drive the chipset successfully. So i can not start X-window. If anyone has a solution to this problem?
View 3 Replies
View Related
Apr 6, 2010
I recently installed ubuntu 9.10 dual boot. All went well until I upgraded the video drivers for the nvidia chipset on my motherboard. If I leave Gnome to start with the single user i created i get a black screen and 'mode not supported ' message on the monitor. BUT if i drop to root and 'startx' all is well and i can adjust the various screen resolutions and they all work well.
At this point i created another user name to check, and that works fine also, but if i drop back to the original user i get no screen unless i select 800x600, although all the other resolutions work fine with root and the other user name. Im stumped as I presume there's only one xorg.conf file for all users.
View 1 Replies
View Related
Dec 8, 2009
Just got the latest kernel update 2.6.31.6-162 for fedora 12 64bit and it won't boot on my PC. I just get a black screen with some text that doesn't mean anything to me. Computer is a s775 E7200 with nvidia 730i/9300 integrated graphics. I am NOT using hardware graphics drivers at the moment, having decided to stick with Nouveau drivers for a time. What system log tools do I need to identify the problem?
View 2 Replies
View Related
Apr 20, 2010
can we find logarithm to base 10 instead of base 2 on shell script??i can do it with bc..like 'l(1000)/l(10)' | bc -l
View 1 Replies
View Related
Jan 9, 2011
I just replaced the ATI videocard by a NVIDIA GT430 videocard on my Slackware64 13.1 htpc and cant get the card to be detected by alsa so I have no sound through HDMI. Only the onboard devices are detected. Alsaconf does not see the card and the Kmix application does not see it either. Only lspci & cat /proc/asound/cards see it but seems not able to use it...I am using the stock slack64 13.1 kernel 2.6.33.4 and I've recompiled alsa from sources to version 1.0.23. What do I need to do to get this to work??aplay -l
Code:
**** List of PLAYBACK Hardware Devices ****
card 0: pcsp [pcsp], device 0: pcspeaker [pcsp]
[code]....
View 3 Replies
View Related
Jun 25, 2011
When I had UBUNTU 10.04 sound WORKED!I have post several threads about this issue, I hope this would be the last one, My OS version is Ubuntu 11.04, my hardware is: Nvidia GTS 450 video Card EGS; and an integrated sound card reference: Via Azalia HDAC VT1708/A; After installing ubuntu I had no audio through my integrated sound card, I cant use my NVidia HDA card because I need for it an HDMI AUDIO, and I dont have any HDMI sound devices like dvd or TV. So I need to use my integrated default Via soundcard. I Updated the OS, nothing changed. After typing aplay -l it showed this:
aplay -l
**** Lista de PLAYBACK dispositivos hardware ****
tarjeta 0: NVidia [HDA NVidia], dispositivo 3: HDMI 0 [HDMI 0]
Subdispositivos: 1/1
Subdispositivo #0: subdevice #0
[code]....
View 1 Replies
View Related
Apr 16, 2010
so the google chrome web browser for linux says it runs on Ubuntu. If i installed Linux Mint which is based on Ubuntu and uses the same kernel, could I run the google chrome web browser on there?
Does any software made for Ubuntu work on any variant distro of Ubuntu?
View 2 Replies
View Related
Aug 29, 2011
I have the nVidia driver on my desktop kernel set-up but have to change /etc/X11/xorg.conf from nVidia to nv to get a X to run in Xen. Whilst this works, is there a way to tell Xen at boot time to use nv rather than nVidia so I don't have to edit xorg.conf each time?
View 2 Replies
View Related
Jun 2, 2011
fresh install of 11.04 on a built system (frankenstein leftovers), 2.something ghz, 1gb ram, a host of drives, and a 64mb nvidia mx440 with svideo out. Boots up, looks pretty, something about unity not finding 3d graphics (fine, i don't really want it, just more fancy gui crap to suck cpu cycles) and runs fairly well. so I think, cool, svideo out, old 52" rear projection....HTPCish. "Lemme get this thing hooked up to the tv, what a great idea" So, I start looking around and find all kinds of wrong posts about not Natty, and not my video card, and I try this n that,and it doesn't work. I'm all about reading the forums, but I can't find the right info for my sitiation, and I'm overwhelmed/irritated.
Long story short, I added some repository ppg something, and then dl'd and installed the "nvidia-current" driver. After a reboot, I fire up the nvidia gui, and it tells me I have no xorg.conf and to run a particular command in terminal to make one. So I did it. and after another reboot, my system just hangs at "ubuntu" with the four (five?) dots. Reboot, recovery, something something something, safe graphics, backup your xorg.conf? yes. reboot and all is ok now. still no nvidia support. Now I'm reading the internet machine about the xorg.conf being old school, and how I have to make a monitor.conf file with config settings. only problem is it tells me to go to x11/xorg.conf.d/whatever. I have no xorg.conf.d directory. So what's the deal? How in the hell do I get the nvidia driver installed (I think I got that), configured (I have no clue), and running (yeah, I just saw a flying pig)?
View 7 Replies
View Related
Apr 28, 2010
I want to know what kernel varaints different distros of linux support. As of now, I am downloading OS and running:
rpm -qa kernel-*
to find out if it supports smp,PAE, xen or default kernel.Is this right way to check?
View 2 Replies
View Related
Oct 17, 2010
I recently tried to install the proprietary nvidia driver to my laptop, but after disabling nouveau have run into a problem. When I start X I get an error
Code: (EE) No devices detected
Fatal server error: no screens found
I believe the computer is trying to use the on-chip intel card instead of the nvidia card because "dmesg | grep video" specifies "pci 00:02:0: Boot video device", "lspci | grep 00:02.0" gives me "VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
I have googled this issue all day and have not found a solution that works for me. nvidia-xconfig does nothing as doesn't "nvidia-xconfig --multigpus=on". Is there a way to specify which video card my laptop uses on boot? Maybe which my xorg.conf uses?
I will try to add my xorg.conf file later on.
View 3 Replies
View Related
Jul 10, 2010
just did a fresh testing install using the debian installer. i have gnome and an nvidia card. i installed the nvidia driver using the debian way outlined on the wiki. then i ran nvidia-xconfig and it generated an XF86Config file instead of an xorg.conf file. everything works, but shouldnt it be an xorg.conf and if so, maybe it isnt reading the XF86Config file at all?
View 10 Replies
View Related
Jun 8, 2010
I have a fairly old laptop that has been running 8.04. I got the 10.04 alternative CD and updated the system. After the reboot the screen just stays blank. I have left it running for some time to see if anything happens. I have tried to CTRL+ALT+F1 to get a console. But nothing.
So I looked up some solutions on the internet and decided to try xubuntu too see if this may be related to the low (old) specs of the laptop. Got the xubuntu CD. But even booting from the xubuntu CD (try before you install) results in a blank screen. 9.10 boots fine from the CD, but I have not tried to install it yet.
View 3 Replies
View Related
Oct 28, 2010
New Koobface Variant Infects Linux Systems Interesting sounds easily avoidable like any other malware, but is probably a nice reminder Linux users aren't invincible.
View 9 Replies
View Related
Feb 11, 2010
Lately I see a lot of posts/threads on NVIDIA cards and disfunctioning desktops. People rely on older posts and howto's, and run sax2 after driver install (either from repos or "hard way"). Symptoms also appear after updating 11.1 to 11.2 The problems IME are 99% related to conflicts with an existing /etc/X11/xorg.conf, which in 11.2 has become obsolete, though it will be read and used if it's (still) there.
On openSUSE 11.2 we have hardware autodetection and -configuration for everything. So no need for an xorg.conf to configure the X-server. on 11.2, follow this, if NVIDIA driver is installed correctly, but still no proper desktop experience:
[Code]....
View 9 Replies
View Related
Jan 16, 2010
i have a lenovo g550 with nvidia geforce g 105m i tried to install its driver on fedora 11 and 12 and i have followed the instructions of setup as in fedora sites and forums, the problem is after installation i have 6 equal screens 640*320 and i don't know how to edit xorg.conf
View 4 Replies
View Related
Sep 22, 2009
I have a router that is 1000 Base T and two computers each with ethernet cards that support 1000 Base T. All are equipped with Cat 5e cable. Before I had a router that only went up to 100 Base T and I would setup one box with linux running proftpd. On the other box,I would use win xp pro and use firefox to ftp into the other box and download a file. Download speeds went up to 11.2 MB/sec. Now when I switched routers, I expected something like 120 MB/sec but I'm only getting 5.3 MB/sec. What do I need to change?
View 12 Replies
View Related
Dec 26, 2010
I finally decided to transition to a 64-bit install (AMD64). (same machine, just reinstalling as a 64-bit kernel starting w/ a Debian squeeze netinstall image) My audio chipset is nvidia MCP61, and it was working perfectly under a 32-bit kernel (I did the transition because a poorly-written system backup script (my fault) hosed /usr, /bin, and /sbin) When everything was up and running:
*: KDE4 only recognized the output device as ALC1200 Analog
*: kmix only had a single channel(master)
*: alsamixergui did recognize all the channels
*: some games (sauerbraten, for example) had no sound in KDE4.
*: some games (warzone2100, for example) did have sound in KDE4.
*: the games that had no sound in KDE4 did have sound in fluxbox.
I removed the following packages (some of which I had installed to try to get audio working properly):
[Code]....
View 2 Replies
View Related
Nov 19, 2010
I have recently been forced to do a hardware upgrade (my previous mobo died). Now, sounds works ok with,amarok because kde has recognized the new hardware and switched to it.
..... does not work, likely because flash uses alsa-oss which is probably not configured automatically. I have tried uninstalling and reinstalling both alsa-oss and flash, but it didn't solve the problem.
View 1 Replies
View Related
Jun 1, 2009
I've been scanning the apache2 docs for the past few days and have not come up with an answer my following issue:
In my httpd.conf file, at the very end, I have the line
Include conf/vhosts/vhost_*.conf
However, when I run apache checkconfig or try to start apache, it gives me the error:
httpd: Syntax error on line 993 of /etc/httpd/conf/httpd.conf: Could not open configuration file /etc/httpd/conf/vhosts/vhost_1.conf: Permission denied
It appears as if the Include line is correct - in terms of it grabbing the first virtual host conf file. However, I'm confused on the permissions. the /etc/httpd folder is owned by root:root, as are the subfolders. As a test, I chown'd the conf/vhost folder combination and all the vhost files to apache:apache to see if that made a difference, and it appeared to make no difference at all. The log files don't contain anything (assumed because apache isn't starting). If I place the contents of the vhosts in a singular vhosts.conf it works - with the permissions set to root:root. I'd like to avoid having to use one vhosts conf for the configuration I'm trying to achieve - as it would make my life a lot easier.
View 3 Replies
View Related
Jul 25, 2010
phpmyadmin files are in usr/share/phpmyadmin but i cant find anything in my apache2.conf or httpd.conf files that point to that directory.How do I find the route taken from the Server root "ServerRoot "/etc/apache2"" to the phpmy admin files.
View 5 Replies
View Related
