Ubuntu :: 11.04 Nvidia No Xorg.conf And Dual Monitors
Jun 2, 2011
fresh install of 11.04 on a built system (frankenstein leftovers), 2.something ghz, 1gb ram, a host of drives, and a 64mb nvidia mx440 with svideo out. Boots up, looks pretty, something about unity not finding 3d graphics (fine, i don't really want it, just more fancy gui crap to suck cpu cycles) and runs fairly well. so I think, cool, svideo out, old 52" rear projection....HTPCish. "Lemme get this thing hooked up to the tv, what a great idea" So, I start looking around and find all kinds of wrong posts about not Natty, and not my video card, and I try this n that,and it doesn't work. I'm all about reading the forums, but I can't find the right info for my sitiation, and I'm overwhelmed/irritated.
Long story short, I added some repository ppg something, and then dl'd and installed the "nvidia-current" driver. After a reboot, I fire up the nvidia gui, and it tells me I have no xorg.conf and to run a particular command in terminal to make one. So I did it. and after another reboot, my system just hangs at "ubuntu" with the four (five?) dots. Reboot, recovery, something something something, safe graphics, backup your xorg.conf? yes. reboot and all is ok now. still no nvidia support. Now I'm reading the internet machine about the xorg.conf being old school, and how I have to make a monitor.conf file with config settings. only problem is it tells me to go to x11/xorg.conf.d/whatever. I have no xorg.conf.d directory. So what's the deal? How in the hell do I get the nvidia driver installed (I think I got that), configured (I have no clue), and running (yeah, I just saw a flying pig)?
View 7 Replies
ADVERTISEMENT
Jan 19, 2010
My Dell Precision Workstation was shipped in 2003 with RH Linux installed (most likely RHEL 4) - though not sure.
At the time, the dual monitors worked by replacing the X86config file with one sent from Dell.
Since, my disk failed and I had to replace the disk and reinstall RH Linux with the shipped disks, RHEL 5.
Now, I can not find X86config; rather, I have been trying to update the Xorg.conf file with no to limited success.
Both monitors are driven off of one Nvidia Quadro FX 1300 videocard. My goal is to get the screen to span both.
Does anyone have a Xorg.conf file that would support this?
View 7 Replies
View Related
Aug 4, 2010
Can anyone help with me configure my dual-screen monitors for rotation? I have xrandr 1.1. Have tried various approaches, nothing takes. I can't even get the xrandr options to show up in KDE's Display control panel.
My lspci output: 03:00.0 VGA compatible controller: ATI Technologies Inc RV516 [Radeon X1300/X1550 Series] My current xorg.conf (works, minus screen rotation): # Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "Multihead layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
Option "Xinerama" "off"
[Code]...
View 1 Replies
View Related
Jun 24, 2011
I am having some real problems with my dual monitor setup in Centos 5.6.I am trying to run 2 individual monitors like span say the whole desktop over 2 monitors say, using the Admin>Display (I think it's that menu, sorry working from MS Windows at the moment).But everytime I set them up perfectly, every time as it requests you do reboot your computer once the changes have been comitted (written to presumably the xorg config file), the whole Window X Server? it crashes.
Any suggestions as to what to do? I am using an Nvidia Gefore 9600 GSO 768Mb RAM graphics card on it, using one DVI monitor and then an old CRT, but surely it should be the software or even the drivers that are causing the problem.I mean I could just put up with having one monitor but it really bugs me, as I prefer to have one screen for my research and one screen for my production work so to speak.Also I am running an AMD processor +4400 to be exact
View 2 Replies
View Related
Mar 24, 2011
I'm trying to set up a tri monitor setup. Unfortunately I must use 2 cards, one an AMD HD4350 and a PCI Geforce FX200. (Old skool I know) Due to the restrictions, I am forced to use the open source drivers (else nvidia glx will clash).
1: Use XRANDR to span the displays (this is what I did previous to the introduction of the third monitor and nvidia card to my system) I tried to do this, by setting up a second X screen on the NVIDIA card, disabling Xinerama; but after much googling I can't figure out the syntax for panning across 2 screens (X screens) in XRANDR, even tho it's >1.3, which supposedly supports multi card output.
2:Use Xinerama, sacrificing randr, and composite extensions. I also attempted to do this, with some limited success. I could get the NVIDIA screen to be right of the ATI, but I couldn't get 2 independent outputs running on the ATI card, even with "ZapohHeads" appended to one of the device sections for my ATI card.
View 1 Replies
View Related
Dec 11, 2010
I've just done a fresh install of Lubuntu 10.10 on an older Sony Vaio laptop. Having learned the hard way about editing xorg files, I wanted to create a backup of the xorg.conf file so that I dont have to do another install when I screw everything up. In a terminal, I typed
[Code]....
View 8 Replies
View Related
Jan 24, 2011
I'm trying to set up my monitor and tv for dual display but I'm having some problems. I want them to display the same thing so I've enabled twinview and I figured the second display position should be set as clone but when I save xorg and restart the x server the position reverts to absolute. Anyway, the monitor is set as the primary display and it's the one I'm having problems with. The tv is fine but the monitor's display is stretched off the screen so I can't see the far right or bottom of the screen. I'm very new to linux and I'm just finding my feet so if there's any other info needed you'll probably have to be very specific.
View 2 Replies
View Related
Aug 29, 2011
I have the nVidia driver on my desktop kernel set-up but have to change /etc/X11/xorg.conf from nVidia to nv to get a X to run in Xen. Whilst this works, is there a way to tell Xen at boot time to use nv rather than nVidia so I don't have to edit xorg.conf each time?
View 2 Replies
View Related
Jul 1, 2009
I have a dual monitor setup (Twinview), both monitors are connected to my 1xNvidia MSI NX8600GT card...I've been using a 21.6inch HannsG HG216D (herein referred to as HG216D) monitor as my LEFT monitor, and a Dell 1905fp (herein referred to as 1905fp) as my RIGHT monitor.
I recently got rid of the 19inch 1905fp Dell monitor and moved my HG216D to the RIGHT and now I have a new 23inch DELL S2309W (herein referred to as S2309W) on the left. The new S2309W is connected to my computer via DVI cable and is configured Perfectly at it's native 1920x1080 resolution.
However I can't for the life of me get my HG216D back to it's native 1680x1050. The HG216D is connected via VGA cable that is also routed thru a KVM, I realize this means that this monitor can't/won't be auto-configured. However I should be allowed to set it manually right?...
Code:
Won't let me select 1680x1050 for the HG216D resolution, it will only let me select 1440x900 MAX, there is no option for 1680x1050, (See attached: screenshot)
I've tried to manually edit my /etc/X11/xorg.conf, but after hours on end messing with it, I give UP...
Here is my current xorg.conf:
Code:
I am just not sure what I need to change and how to get the second xorg.conf to play nice via a VGA connection?
View 1 Replies
View Related
Apr 11, 2011
I just built a system with an Nvidia GT240 and Ubuntu 10.10. I have two monitors and am trying to get them set up. I currently have them working fine in twin view but I'd like to have set up as separate X screens. However, whenever I do that X crashes. I've got the latest drivers set up from the x-sane PPA so I'm not sure what more I can do. My driver version is 270.29.
View 4 Replies
View Related
Oct 17, 2010
I recently tried to install the proprietary nvidia driver to my laptop, but after disabling nouveau have run into a problem. When I start X I get an error
Code: (EE) No devices detected
Fatal server error: no screens found
I believe the computer is trying to use the on-chip intel card instead of the nvidia card because "dmesg | grep video" specifies "pci 00:02:0: Boot video device", "lspci | grep 00:02.0" gives me "VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
I have googled this issue all day and have not found a solution that works for me. nvidia-xconfig does nothing as doesn't "nvidia-xconfig --multigpus=on". Is there a way to specify which video card my laptop uses on boot? Maybe which my xorg.conf uses?
I will try to add my xorg.conf file later on.
View 3 Replies
View Related
Jul 10, 2010
just did a fresh testing install using the debian installer. i have gnome and an nvidia card. i installed the nvidia driver using the debian way outlined on the wiki. then i ran nvidia-xconfig and it generated an XF86Config file instead of an xorg.conf file. everything works, but shouldnt it be an xorg.conf and if so, maybe it isnt reading the XF86Config file at all?
View 10 Replies
View Related
Apr 9, 2010
I have installed Kubuntu 8.04.2 on a USB stick with persistence to keep any changes I make after a reboot and it works fine. I then installed the 185 Nvidia driver to give me higher resolutions and it works fine.
But each time I reboot, my updated xorg.conf is replaced with the default xorg.conf that ships with that version of Kubuntu and a backup is made of my updated xorg.conf (the correct one) which looks like xorg.conf.20100409135913. I have to put the backup xorg.conf back in place to get my Nvidia driver to work with the correct screen resolutions again. Otherwise my screen resolution is too low.
What could be causing this behavor? I'm sure it not the persistence feature of the USB stick failing since a backup is made of my original xorg.conf.
I might add more information. The xorg.conf that gets changed after a reboot says "This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database." #
View 11 Replies
View Related
Feb 16, 2011
1. What is the difference between files (xorg.conf and xorg.conf-vesa)
2. No matter how hard I try I can't change keyboard layout in xorg.conf-vesa (I change it in file ) but there is no actually anything changing, it starts to get annoying - for example - below goes my xorg.conf-vesa, if I uncomment and set line from
[Code]...
View 3 Replies
View Related
Feb 11, 2010
Lately I see a lot of posts/threads on NVIDIA cards and disfunctioning desktops. People rely on older posts and howto's, and run sax2 after driver install (either from repos or "hard way"). Symptoms also appear after updating 11.1 to 11.2 The problems IME are 99% related to conflicts with an existing /etc/X11/xorg.conf, which in 11.2 has become obsolete, though it will be read and used if it's (still) there.
On openSUSE 11.2 we have hardware autodetection and -configuration for everything. So no need for an xorg.conf to configure the X-server. on 11.2, follow this, if NVIDIA driver is installed correctly, but still no proper desktop experience:
[Code]....
View 9 Replies
View Related
Jan 16, 2010
i have a lenovo g550 with nvidia geforce g 105m i tried to install its driver on fedora 11 and 12 and i have followed the instructions of setup as in fedora sites and forums, the problem is after installation i have 6 equal screens 640*320 and i don't know how to edit xorg.conf
View 4 Replies
View Related
May 3, 2010
I'm running the ubuntu based Green OS and cant get my video card properly configured. i've already gone through the forums to figure out what i need to do to get my ATI card working but my system wont let me access the xorg.conf file. i can see it using the the GOS file editor but it wont let me save the modifications. when i attempt to edit from a terminal window with su privelages it tells me that /etc/x11/xorg.conf does not exist. i've even tried booting into recovery mode and using the root instead of the sudo command. nothing i've tried will let me open the file.
View 3 Replies
View Related
Sep 23, 2010
Ever since upgrading from F11 to F13, wallpaper spanning has been driving me nuts. No matter what the size of the wallpaper, I cannot get it to span two desktops correctly anymore. Most styles (zoom, scale, etc...) cause the image to be duplicated on both screens and the "span" style centers the image between the screens and appears to scale down the image leaving large gaps on either side. It's like the background program doesn't recognize the "virtual resolution".
View 8 Replies
View Related
Oct 15, 2010
I have an Nvidia card that supports two monitors. Actually I have it setup. The problem I am having is I want to turn one of my monitors sideways so I can read forms easier. I can do this with just one monitor. RandR works fine with that. But it seems that when the system makes the two monitors into one long one it will not allow me to tweak the rotation in RandR.
Is there something I am missing. I deal with a lot of contracts and forms. And when I am reading them I hate scrolling. So I thought this could be an option. I have searched the net for 6 hours now. Maybe I do not know what I should be searching for.
View 1 Replies
View Related
Jun 19, 2011
my laptop screen has 1900x1280 (native resolution) and my second monitor has 1600x1080
After browsing the forums and messing around with drivers I managed to get the resolution up to 1600x1080 (from 1000x800 at install) on the laptop screen. No luck at all with the second monitor. I currently have it connected with both VGA and DVI.
my understanding is I need to use twin view to setup the second monitor. I've read several of the earlier posts but haven't been able to get it to work. Here is my current xorg.conf file:
Code:
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Configured Monitor"
VendorName "Unknown"
[Code].....
View 9 Replies
View Related
Feb 25, 2010
I need a seperate workspace on each monitor and I use nvidia propriatary graphics drivers (I have a Geforce 9500 GT Graphics Card. It has one dvi port and one vga using both for my monitors.) The only problem is whenever I try to save the settings I apply something like twinview or the seperate x workspaces with the second monitor enabled It applys it but this is what happens in sequence (It may be only twinview that does this but i'm not sure not at my home computer right now):
1.) Picture cuts out to a blank screen on main monitor
2.) Pictures turns on in the second monitor (Its a seperate workspace from the main monitor)
3.) 3 to 5 seconds later the picute cuts out to the second monitor
4.) I'm left with two blank screen monitors and no way to turn the GUI back on other than a complete restart of the computer.
I need help on both of these issues. If it helps any one monitor is a CRT (The one on the right) and the one on the left is an LCD (The LCD is the main one). I also have Ubuntu 9.10 32 bit Karmic Koala if that helps. Lastly I have the latest propriatary graphics driver from nvidia (185 I think.) I also installed the driver from nvidia via Jockey (I think thats the name of the default driver installer for ubuntu..?) That is my situation and as you can tell its a pretty complicated one.
View 1 Replies
View Related
May 11, 2010
I have dual monitors running successfully with my BFG GeForce 8400GS and NVIDIA X server settings. The only problem is every time I restart, the settings go back to default, so I have to setup the dual monitors again.
View 5 Replies
View Related
Jan 26, 2011
I've read the how-tos (thank you oldcpu!) and wikis about how xorg.conf take precedence over the section configuration files in etc/X11/xorg.conf.d/, if it exist. I also understand that the xorg.conf can be partial. If it is missing some sections, these will be taken from the corresponding xorg.conf.d section config file. Currently I'm using a xorg.conf generated by nvidia-settings in one of my home machines, due to a dual-monitor setup. After generating xorg.conf, the device sections are:
in xorg.conf:
Code:
Section "Device"
Identifier "Device0"
Driver "nvidia"
[code]....
My question is if the Option "UseCompositeWrapper" "True" will be used or not. In other words, if a section exist in xorg.conf then it's correspondent in xorg.conf.d/ will be completely ignored *or* only the lines in xorg.conf.d/ that already exist in xorg.conf will be ignored?
View 5 Replies
View Related
Sep 14, 2010
I've just installed 10.04 on an old system.
Hardware is:
- NVIDIA GeForce 6600 GT video card
- Gigabyte EP35C-DS3R motherboard with 3 gig ram, few TB of hard-drive
- dual monitors, both viewsonic vx2235wm, primary on analog, secondary on digital (but whatever, happy to reverse the order)
On the old setup (8.04) the monitors were set up as twinview, 1680x1050 each, no problems. On the new setup (10.04) my old xorg.conf (see below) doesn't work and nvidia xserver settings refuses to detect my second (digital) monitor at any resolution greater than 640x480.
I've tried messing with xorg.conf to no avail and google doesn't appear to be my friend.
Here's the old xorg.conf file that worked in 8.04 but refuses to even boot under 10.04:
Code:
View 1 Replies
View Related
Nov 26, 2009
I used preupgrade to upgrade from F11 to F12. In F11, I used the proprietary nVidia drivers from rpmfusion, and they worked well. I have refrained from installing the nVidia drivers in F12, because of the problems reported for users of KDE. I removed my old xorg.conf, which has references to the nVidia driver and to "TwinView," the proprietary method of managing two screens, so as to let X discover both monitors.
Now, however, my second monitor stays black, even though xrandr and KDE RandR show both monitors correctly. Xorg.0.log shows the nouveau driver is loaded. (I also tried to create a new xorg.conf following guidelines from the web, but many of the guidelines are from before xrandr, and I'm not confident I have it right yet.) It seems that X believes I have two monitors, because I can drag a window off into the blackness (and it's never heard from again!) I know that the hardware is working, because I just booted into Windows 7, and I could see the desktop on both windows.
How do I convince X and KDE to display on both monitors?
View 2 Replies
View Related
Feb 28, 2010
Anyone using dual monitors (dual head) and has a nvidia graphic card, might be interested in the app, Disper, nvnews.
You can configure a dual monitor, on/off, via nvidia-settings, but you can automate it with Disper by writing a script to execute something like:
View 9 Replies
View Related
Mar 15, 2011
I have openSUSE 11.4 with standard KDE and two screens attached.Here's the question: How do I configure dual monitors when using the proprietary nVidia drivers?The openSUSE 11.4 installation put in the "nouveau" drivers for my nVidia card and I was able to configure dual monitors using KDE's Configure Desktop --> Display & Monitors GUI configurator. I could also set up dual monitors using a script based on xrandr (e.g. "xrandr --output VGA-1 --auto --pos 0x0 --output DVI-I-1 --auto --pos 1920x0")My screens are detected as VGA-1 and DVI-I-1 by the nouveau drivers.
OK, today I switched to the proprietary nVidia drivers. Only one of the screens is now detected and displayed in the KDE monitor configurator and that's marked as "default" rather than as a VGA or DVI connection.When I run xrandr to configure monitors, I get error messages if I refer to VGA or DVI hardware.
More info -- RPMs
nvidia-gfxG02-kmp-desktop-260.19.36_k2.6.37.1_1.2-23.1.x86_64
x11-video-nvidiaG02-260.19.36-24.1.x86_64
[code]....
View 7 Replies
View Related
Feb 25, 2010
I have Ubuntu 9.10 installed on my computer. I also have Galaxy (Nvidia) 9500 GT PCI-E card installed on it. I can get both monitors (Acer X223w) to work but every time I shut off the computer and turn it back on the second monitor is shut off. I just need to turn it back on using Nvidia X Server Settings. I have tried to save my X configuratin file but I keep getting an error of:" Unable to remove old X config backup file '/etc/X11/xorg.conf.backup'. I have a feeling this is because I am not signed in as root. Is this correct? If this is the case is there a way to get to sign in as root not using the command lines? Otherwise they need to remove this button. I can manually create a backup (copy paste into a text file). I think. Getting back to my Xorg.conf file, I think I need to modify it to have two screens. I have also got some information on my video card using the lspci command. I think I need some information from this. I have written below (towards the bottom) what I think the file should be. Now before I do this, does anybody know of an easy way to back up my whole computer? With my luck I am about to screw something up big time. I think I can just get away with the text file that I copied from the Xorg. Worst case scenario I will just manually replace the file.
Information on my computer:
OS: Ubuntu 9.10 32bit
Motherboard: ASUS M3A78
CPU: AMD Phenom 9500 Quad Core
Video Card: Galaxy Geforce 9500 GT 1GB 128 bit DDR2 (Nvidia)
Hard Drive: Hitachi 1 TB Sata Drive 3 Gb/sec 7200 RPM
Ram: 4 GB (I think, its been awhile since I built this thing)
DVD Burner: LG
Here is a copy of my xorg.conf file: (I don't think it matters but I have both monitors turned on right now).
from the lspci | grep VGA:
I think I need the 01:00 information for my Bus ID. The only thing that I am confuse on is that I was expecting to see two of them.
Okay, this is what I think I need to do: I tried to add color to make it easier to find the changes I made but for some reason I cannot. I will add **** on the end (right side) so my additions and questions will be easier to find.
Do I need to add another Device for the video? Doesn't make sense to me since I only have one video card. I was told it should be based on the # of chips on the card. So I guess I should have two of them since I have two outputs.
View 2 Replies
View Related
Jan 17, 2009
I've had so many problems with Ubuntu. it runs fine version 8.10 64 bit, but I can't install nividia drivers to run both my monitors. and of course steam games don't work... So I thought I'd join the Ubuntu forums to ask questions on has to fix it... NOT EASY. I tried to join there forum, but I could not even find a page to make an account? dose anyone know how? They expected me to all ready have one... and after an hour looking at the Ubuntu web site I could not find anywhere to make an account and join there forum. So here I am, hoping someone here can help.I just want to install the Nvidia driver for both monitors work and I might be able to install a 3rd party softare to let me play steam games. but Ubuntu keeps asking for some codes... I'm not sure what they are and when I try and update Ubuntu, if askes me for a password. I never set any passwords as I'm still learning the OS, so I tried "Root" and "Guest" both in lower and upercase, and both don't work. What is the bloody password, I never set one, so why is it doing this to me? I can't update Ubuntu. And it keeps asking me for some bloody code to install the Nvidia drive I downloaded? why? what is this code and where do I get it? And then other searches I've done tell me to get a "command line" and enter a command that deletes and/or fixes the problem... problem is that I have no idea how to find this command line in Ubuntu and know one what's to tell me, like it's a bit secerate, and I can't even join there forum to ask.
I'm a windows expert and work in IT with windows, but I thought it's time I learn more about other OS's, but Ubuntu is makeing it very hard as I can't even join there forum or install a Nvidia driver to run both my monitors, I'm just about to give up on Ubuntu as the surport form I can not access and there is no info on there web site on how to install and run dual monitors, and I can't sign up for there forums anywhere.
View 9 Replies
View Related
Oct 19, 2009
This is a repost of my initial problem, I need some one who knows what they are doing more than I too take a look at this command output and give some sort of direction/clue/etc on what I'm doing wrong or missing.
Is my xorg.conf missing some vital line(s) or setting?
My best guess is that i'm missing something to tell the Xserver to use both screens, as the Xorg.0.log does not talk about trying to bring up the intel display; but this is just a hunch.
I'm running kubuntu 9.04 with 2 monitors: on-board intel video and a PCI nvidia display: I am using my nvidia display fine, but still can not get my 2nd display (the intel) working. What the heck am I missing?
lspci:
Code:
Code:
View 3 Replies
View Related
