Ubuntu Multimedia :: Upgraded The Video Drivers For The Nvidia Chipset On Motherboard
Apr 6, 2010
I recently installed ubuntu 9.10 dual boot. All went well until I upgraded the video drivers for the nvidia chipset on my motherboard. If I leave Gnome to start with the single user i created i get a black screen and 'mode not supported ' message on the monitor. BUT if i drop to root and 'startx' all is well and i can adjust the various screen resolutions and they all work well.
At this point i created another user name to check, and that works fine also, but if i drop back to the original user i get no screen unless i select 800x600, although all the other resolutions work fine with root and the other user name. Im stumped as I presume there's only one xorg.conf file for all users.
View 1 Replies
ADVERTISEMENT
Feb 18, 2011
I haven't any idea what drivers I should get from the repositories! I just want to play games. My chipset is NVidia GeoForse 6150SSE. I also don't know if the chipset handles sound and what I need for gaming.
View 6 Replies
View Related
May 17, 2010
I've tried to enable the drivers for a Nvidia 8400GS video card on Ubuntu 10.04. I've tried change desktop background > visual effects. It tells me Desktop effects can't be enabled. Sudo jockey-gtk looks and tells me no proprietary drivers are in use by my system. I've tried installing from Nvidia's site and that seems to go okay but doesn't seem to work. I have an internal video card that can't be turned off in BIOS )either ON or AUTO) that might be causing me problems.Lspci:Quote:
ron@desktop:~$ lspci
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 01)
[code]....
View 1 Replies
View Related
Apr 3, 2011
I can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal
1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..
2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"
3.) Stuck don't know what to do.
View 4 Replies
View Related
Mar 20, 2010
i just instaled bt4 on my hdd and i have a problem with instaling drivers... i cant find and install driver for my video card nvidia 8200 integrated on motherboard. exacly i got the problem with changeing video resolution... i have only 640x480 and 800x600, and here is the problem, i cant put it in 1024x768..
View 6 Replies
View Related
May 6, 2010
ATI has a driver listed for Linux x64 for the Radeon x1250 and this is what happens when you run it, I got the same results with Fedora 12 also. Ubuntu runs GREAT on my laptop, but 3D acceleration would be nice, if I can get this driver, I will be set free of Microsoft almost completely. Any ideas? Please do not suggest I buy a new laptop, its a Turon X2 and its powerful enough for me.
[Code]...
SO, its clear that I have no 3d acceleration, my second display is all garbled like the refresh rates isnt being applied properly, and It would seem some lame generic driver is loaded for my GPU, does anyone have any idea if and when or where a proper Hardware driver for the x1250 series will be released?
View 1 Replies
View Related
Apr 8, 2010
I have been using ubuntu for quite a long time, and for the first time, I am now unable to set nvidia drivers to work. I have just install ubuntu 9.10 amd64 on an AMD 64 athlong X2 with a GEForce 6500 nvidia card.
The only reason I need the proprietary drivers is to use two monitors.
I am going crazy, I have tested everything I have found on the web. I have tried all the nvidia drivers version, I have tried envyng, ... but nvidia do not work!!
I am trying Xinerama with nv, but it does not work either!!!
Here is my xorg.conf file in which I have tried to use nv driver to set dual monitor. X fails to load and it says that screen 0 is deleted, that devices are found but there are no matches in the config file. Any clue?
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
[Code]....
View 3 Replies
View Related
Nov 11, 2010
I upgraded to 10.10 from 10.04, and I noticed that the nvidia driver are not working all well as they did before.
Although I get the nvidia logo when X starts, the 3d part does not work well. For example using mplayer -vo gl does not work anymore. When I type glxinfo I get the x error of failed request badwindow message. More anonyingly flash will crash when going to fullscreen.
The 2d part of the drivers seem fine because xvinfo and -vo xv works fine.
View 1 Replies
View Related
May 1, 2011
I just installed 11.04 and I knew I would have to install the NVidia video drivers. So it was no surprise when it popped up a warning and dropped me into Gnome Classic view. So I turned on the NVidia drivers and rebooted. In my desktop selection menu on the login screen I have "Ubuntu" and "Ubuntu Classic".
Unfortunately they look exactly alike, with the Gnome panel along the top, and the panel with the taskbar, desktops and recylce bin on the bottom. I've gone back-and-forth a few times and nothing has changed. Some changes in one environment is not set in the other, like they really are 2 different environments.
According to the Software Center, Unity (not Unity 2D) *is* installed.So how can I boot into the Unity desktop?
View 9 Replies
View Related
Sep 15, 2010
I have installed Tvtime and XawTv applications and I am currently trying to configure both these applications to detect my tv tuner card (pixelview play tv pro with conexant cx2388 chipset). configure both video and audio with channel scan for my tv tuner card?
View 2 Replies
View Related
May 3, 2010
I have an old video card, Nvidia XFX 7800GT, which is now beginning to fail and I need to upgrade. I am not huge a gamer but I do play/buy games on regular basis. Right now I'm playing Eternal Lands on the Linux side. Looking to spend $100-$150 on a new card.I have a Core2Duo Wolfdale 3.0, with 2ghz ram and run Lucid 32bit. Also run windows Vista64Ultimate on dual boot (rarely).
I would love to buy a new ATI 5770 or 5830, ATI budget cards seem to be much better for the buck over budget Nvidia cards, but I'm concerned with ATI drivers and long term with Ubuntu.On the Nvidia side I'm considering the GTS 250. The only advantage I can find is lower power consumption with Nvidia and Ubuntu has always preferred Nvidia over ATI, as far as working drivers go.As Far as Ubuntu and Lucid is concerned, which way is best, ATI or Nvidia? Has anything changed with ATI support, that could make theor cards more compatible now and in the future?
View 9 Replies
View Related
Dec 21, 2010
I just installed a nvidia TNT2 m64 video card on my AMD 2500+ Ubuntu Linux 10.04 on Gnome 2.30.2. (yeah, it's old). I'm trying to install the proper driver, but system>admin>Hardware drivers says there are no proprietary drivers enabled. nVidia synaptic packages installed (settings; common; modaliases 96, 173, current; xorg video). I used to have the same, or nearly the same card working great before some a**hole stole it. How to configure?
View 1 Replies
View Related
May 14, 2010
i just upgraded to ubuntu 10.04 from 9.10. videos wont play in firefox anymore. ..... videos require 100% computing power and play at 1 frame every 5 seconds with choppy audio.
View 2 Replies
View Related
Nov 13, 2010
is this possible? Or does one have to use the binary blobs?
View 1 Replies
View Related
Apr 11, 2011
I reinstalled my computer with Ubuntu 10.10 and the resolution was fine. I turned off my computer last night and when I turned it on today it's back to everything being huge and the screen resolution being 640 x 480. Then when I try to change it, it says my video card isn't supported. All I want to do is revert back to my stock video card in my computer and remove the nvidia one since obviously ubuntu isn't working with it.
View 9 Replies
View Related
Jun 8, 2011
First off, I'll come clean and admit that I am still relatively green to Linux, but I'm not afraid to tackle the complex. I have a few stroke-inducing issues that I haven't been able to resolve as a usually do by eye-grepping Google and the various forums. Of course, I'm running Ubuntu 11.04 with Unity - which is fairly new and undiscovered country.
I've got this no-name brand, sample laptop from a manufacturing partner of ours out of Shenzhen China. It's rocking a Core i3 M350 with an nVidia GT 330M (discreet-ish?)& apparently some flavor of Intel integrated graphics.
Now, there are so many variables at play, I'm not quite sure where to begin - so please bear with this post a bit longer as I unravel the details. Loading the nVidia drivers (both proprietary and the experimental open varieties) results in Unity no longer working and dumping me back to the classic Ubuntu desktop. I believe it has something to do with the fact that I have no ability to disable the integrated graphics through the BIOS and Ubuntu has set its hopes and dreams upon using Intel graphics for the rest of all time.
That said, running without the nVidia graphics drivers, I am able to use Unity and it runs pretty well.The only caveat being that on occasion (read: intermittently), when the laptop wakes up from suspend/hibernate mode, playing Flash video in full screen gets choppy (stutters). Restarting Ubuntu resolves the issue. I suppose I should verify that I am using Firefox 4.
In addition, there are times that the WiFi adapter will not wake, and using the keyboard function key to power cycle it ceases to function. A complete shutdown is required to address this one. i.e. Restarting and warm-booting does not fix it.
Did I mention Skype is a terd? I don't actually expect a fix for this pile of hot mess - just thought it might make someone laugh. If there is anyone here that could lend me a hand with any or all of these issues, not only will you have the satisfaction of knowing that you are one bad Mambajamba (TM), but I'll buy you a drink or something via Dwolla or bitcoin.
View 2 Replies
View Related
Nov 3, 2010
I have background in ArchLinux though, and have successfully installed, configured and used it on one workstation and two laptops. owever, i just got a new PC and spent several days trying to get Arch to run on it. Finally, i decided that i don't want to spend my time on this anymore and thought that maybe it's a sign i should try other distros (even though theoretically Linux is Linux is Linux), and Debian has always been appealing to me.
So my question is, has anybody had any experience (or issues) running Debian on the hardware mentioned above? I'm actually contemplating Ubuntu already, because there's a chance it will spare me some time and configure everything by itself, but the pride of a person who used to configure Linux from scratch doesn't let me switch to Ubuntu yet
View 4 Replies
View Related
Jan 5, 2009
Quote:
NOTICE: Some very old nVidia Video Cards from more than 9 years ago might not work with this way, but just try this method because you'll see if there's a driver available for your video card in Fedora or not.
I have been noticing that it was hard to set up my own NVidia video card, and alot of other people shared the same problem as I had. I have been experimenting with some things, and here's what I did to solve it.
It's fairly easy, anyone can do this. Read and follow these instructions:
Install all updates. Although it seems unimportant, it really is.
Go to [url] and follow the instructions to install the free and nonfree repositories
Go to System > Administration > Add/Remove Software
Search the following: nv
Click everything which has to do with NVidia. Do not check the checkboxes yet, but read the descriptions. If you've found your video card in the description, check the checkbox at the left of the title.
Install the drivers by clicking "Apply" at the bottom of your screen.
After installing, go to Applications > System Tools > nVidia Display Settings
Set the properties of your video card, such as TwinView or higher screen resolutions.
After you've set it up, click Apply to preview your settings. Change some settings if you like, and then click Apply when you're done. DO NOT EXIT YET!
Click "Save to X Confguration File, but do NOT save the file. Click "Show preview..." and copy the text in the preview.
Go to Applications > System Tools > Terminal and type "su". Press Enter and enter the root password.
Now type:
Code:
Select all of the text in the document and delete it. Then, paste the text of the "Save X Configuration" window into the text editor.
Exit out of the terminal.
Exit out of the nVidia Display Settings application. Do not save anything from this application.
Log out and log back in to see the changes.
If you want to change some settings, repeat steps 7 - 16.
View 3 Replies
View Related
Nov 6, 2010
How is OpenGL support (specifically OpenGL 3.x) in the different video card drivers available for Linux?Assuming that the hardware supported it well, would the drivers be an issue?
View 1 Replies
View Related
Jan 1, 2010
I have activated dual screen monitors using the Nvidia driver GUI as Sax2 would not correctly configure it. Now at every boot I get the message "undefined video mode 31a, press [enter] for a list of video modes or [space] to continue. After pressing space the system boots to my liking, how can I get rid of the message at every boot up?
I am using Suse 11.2 and KDE4.3.1 My video card is an Nvidia Geforce 7100 GS I thought I was using the Nvidia drivers as I have a GUI from Nvidia in my launch menu if I search "Nvidia" and I have completed the one-click installation. Although when I go into "My Computer" it says driver unknown.
View 8 Replies
View Related
May 2, 2010
I just upgraded to lynx but my nvidia drivers only say "173" and "recommended" as the two options. no idea which version the "recommended" one is but that's what is enabled. I did an update but still it does not show the 195 drivers that I thought I read were shipping with lucid.
View 3 Replies
View Related
Jul 15, 2010
the url to the nividia drivers for 11.3. They are not yet in the community repos.
View 9 Replies
View Related
Feb 4, 2010
I have a laptop and desktop both with basic installations of 9.10 (Karmic). And, they are networked with a Mac running OS X 10.6.2. Screen sharing simply worked right from the beginning, to and from the Mac, and of course to and from both Ubuntu installs.
Except there was no feedback from one Ubuntu desktop screen being shared. Mouse clicks, mouse movements, and keyboard presses all seemed to have their correct effects. It was just that the results were not fed back to the remote screen.
During troubleshooting, I de-activated (removed) the nVidia accelerated graphics driver (version 185) that had been installed with 9.10 (Karmic). Then screen sharing started to work with the proper feedback to the remote screen.
I tried the pre-upgrade nVidia driver (version 173) and again no feedback from the screen being shared. De-activate the driver and again screen sharing started to work with feedback.
The bottom line seems to be no nVidia proprietary drivers if I want remote screen sharing to work. But this desktop is primarily used as a HTPC with a HDTV monitor. No games. No 3D. Screen sharing is probably more important, but essentially what am I giving up in graphics capabilities by not using those nVidia drivers?
View 2 Replies
View Related
Mar 6, 2010
BlizzPlanet reports that people are seeing their nvidia graphics cards overheat when running the Windows 196.75 driver and playing 3D games. I have to wonder whether I fell afoul of this issue. A week ago I installed the 195.36 nVidia proprietary Linux driver on my Karmic Koala system, after adding the PPD nvidia-vdpau repository to my sources.list. I restarted so the new driver would take effect... and was surprised to see the graphics chip temperature soar to over 130 degrees Celsius. It fried itself. When I opened up the case, I checked the card's fan, and it spun freely, and I'd not heard any noise of the sort that accompanies a dying fan. I'm sticking with 190.53 for now. Has anyone else seen overheating difficulties with the 195.36 driver?
View 2 Replies
View Related
Jul 9, 2010
OK, I'm using Ubuntu 10.04 and since upgrading to the 256.35 drivers from the ubuntu-x-swat/x-updates ppa the ambiance and radiance themes have gone funny. For example the scroll bars and buttons are now very white and when hovering over the time it goes a very bright colour. If I return to the 195 drivers the problem goes, but the 256 drivers have better video vdpau performance. The problem occurs regardless of whether compiz is enabled. The login screen is also affected. My gfx card is an 8600m gs.
View 9 Replies
View Related
Aug 27, 2010
10.04 64-bit
+
NVIDIA GeForce 8500GT 256MB
So I kind of had ubuntu working, but then I tried updating to the newer nvidia drivers and I broke it. I had to uninstall/purge nvidia so as to get ubuntu past the black screen/no signal to monitor...
I had been using a "Broadcom B43 wireless driver" which used fwcutter to extract firmware from various source files. I have never been able to get this install working with nvidia drivers and am about ready to try anything (including yet another reinstall).
**Nvidia drivers 96, 173, & current cause my system to freeze, lock up, reboot, fail to boot, etc. You name it and it's happened.**
I tried using synaptic, jockey and the terminal to install nvidia drivers. Then I tried adding the swat ppa and installing through System-Admin-Hardware Drivers to no avail.
Every time I start my PC it displays this window.
And when I open Hardware drivers this is what appears.
View 8 Replies
View Related
Sep 16, 2010
I executed the following and after a restart I have no signal in my monitor:
Code:
sudo service gdm stop
sudo apt-get remove --purge nvidia*
How can I fix this?
View 1 Replies
View Related
Nov 22, 2010
Got a Gforce4 Ti 4400 graphics card. After installing 10.10 everything works but not optimal:
I cannot choose any visual effects under appearances. I don't have a NVIDIA menu. Can't use any of the features. When looking in the 'additional drivers' section, nothing shows up. Looking at some threads, I tried what is described in: p {margin-bottom: 0.08in;} [URL]
However, the result is crap. As described further down that thread, my screen goes to crap. So, re-installed everything again and I am now wondering if I should just give up. Not my nature though so here is my question:
My card is supported with the Legacy NVIDIA driver: 96.43.xx driver
Latest version on their website:
Version: 96.43.19 Certified
Release Date: 2010.11.16
Operating System: Linux
Language: English (U.S.)
File Size: 15.7 MB
This file is a .bin file. So what should I do. I read something like if you don't use something from the repository you have to re-install it every time Ubuntu's kernel is updated. However, does the driver in the repository support my legacy card. Is it wise to install the certified driver and how do I do that?
View 6 Replies
View Related
Jan 23, 2011
I'm having another go at ubuntu!I have Ubuntu 10.10 running (a fresh install).I went to the nvidia site and downloaded the linux drivers for it, (it's a .run file).So I try runnig it via the terminal, it goes great untill it mentions that I need to exit the X Window system?
So I tried pressing ctrl+alt+f2 (switches to a root terminal?) and tried runnig it from there but no luck either
View 8 Replies
View Related
Jun 6, 2011
I'm having issues getting the nvidia-current drivers working with a GeForce 8400 graphics card on Ubuntu 10.10 (x64). After running nvidia-xconfig and restarting, X fails to start with an error: No devices detected.
Here is my xorg.conf:
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 260.19.06 (buildmeister@builder101) Mon Sep 13 04:59:45 PDT 2010
Section "ServerLayout"
[code]....
View 3 Replies
View Related
