I have a samsung removable hard drive, which have 3 fat32 partitions on it. When I plug into the usb. nothing happened and i just see a sdc was added in /dev/...so, there's nothing wrong with the drive, because i can use it on windows and ubuntu.
View 10 Repliesok I am using Debian 4 bigmem and I set up static ip for my box. This is for a class and we will be moving the hard drives around the lab to different computers. My question is what do I configure to get Debian to be ok with my using different nics at different times.
My first time I used it, I had eth0, but now I'm on a different computer (same type of hardware on all systems) but my nic is now eth1... And I had to set up static again for that nic. How can I have it just maintain a static ip for whatever nic/mac address on the computer that my hard drive happens to be put on?
I am using Debian 4 bigmem and I set up static ip for my box. This is for a class and we will be moving the hard drives around the lab to different computers. My question is what do I configure to get Debian to be ok with my using different nics at different times. My first time I used it, I had eth0, but now I'm on a different computer (same type of hardware on all systems) but my nic is now eth1... And I had to set up static again for that nic. How can I have it just maintain a static ip for whatever nic/mac address on the computer that my hard drive happens to be put on?
View 5 Replies View RelatedThere are 3 IDE drives in this box.
hda has Debian Lenny installed (with swap) and is to remain.
hdb1 has a linux distro on it.
hdb2 is a data partition and is to remain.
No other partitions on hdb.
HDD is data only (not really relevant but mentioned for completeness)
The system boots via Grub from MBR on hda.
I'm trying to install F10-i686-KDE-LiveCD on hdb1 but F10 won't allow it without modifying the partition tables which will, of course, wipe my data on hdb2. hdb seems to be a happy disk; e2fsck shows it clean and both partitions open properly in Konqueror within the LliveCD.
So I tried to install Ubuntu on my Acer Aspire ASE380 desktop, and I think during the partition portion. I think I messed up the hard drive.
Now my computer won't recognize my hard drive. I've tried using the acer repair disks I made, I tried unplugging and checking all the cords and lines, I tired flashing the BIOS, I've tried using other boot disks like Ultimate boot CD, and Acer support is no help either.
I really don't know what to do now. It shows nothing in the boot setup or the BIOS set up. I've also tired the ALT - F10 for acer computers to enter and repair partition and nothing.
I just want to get this thing up and running. I'm tempted to just buy a new hard drive.
I've been trying for hours now to get Ubuntu 10.04 Netbook Remix onto my HP Mini 1030NR. It boots up fine from the flash drive, but then when I go to install UNR on the hard drive I get through the first 3 steps and then get stuck. It goes to the "Prepare partitions" screen but no devices are shown to be partitioned. I formatted the hard drive I'm trying to install on on another computer to NTFS, so it should be blank and ready to go? I should probably mention the drive doesn't show up in GParted either. Is there something obvious I'm overlooking?
I've tried the methods suggested in this thread to no avail: [URL]
I am trying to install Ubuntu 11.04 64bit on my computer, I downloaded it onto my flashdrive from [URL]... When I reach the installation screen all the boxes are checked except 4.4Gb of space available, I know I have enough space because I am using a 1TB hard drive, I also have Windows 7 installed and it recognizes my hard drive. I have tried this with my hard drive partitioned and unpartitioned. I only have 1 hard drive and it has never been part of a raid array. I've also looked on google and the Ubuntu forums and still can't find anything relevant
View 1 Replies View RelatedI'm trying to install Fedora 3 Core on an old hard drive I had lying around. The problem I'm having is that when I go to manually repartition the hard drive with Disk Druid I get this error: Could not allocate requested partitions: Partitioninf Failed: Could not allocate partitions as primary partitions. I can't view the contents of the hard drive to delete stuff.
View 6 Replies View RelatedI have this laptop that I just reformatted in hopes of doing a dual boot between XP and FC4. It is an Acer Aspire 5315-2153 (the Wal-Mart special). I reformatted the drive; the Windows partition is in NTFS and then I have a 10GB partition in FAT32 for Linux. When I try to install FC4, the disk boots into the installer, then it tells me that it does not recognize any hard drives (the disk in this laptop is a Hitachi HTS541680J9SA00). It asks me if I want to load any drivers, and I tried a few and still no success. Any way, after it goes through that, it tries to start anaconda and after that launches it goes to a black screen and nothing happens. So, did I do anything wrong in the Windows install that won't allow the disk to be found? The XP disk only allows a format in NTFS, otherwise I would have done FAT32 on the whole drive. Second, is the anaconda problem something related to the HDD issue, or does anyone think that it may be a separate issue?
View 14 Replies View RelatedIs there any way to make windows recognise my second hard drive (Which is fully exclusive to ubuntu) and access it? Iv'e been getting a few BSOD's since installing ubuntu and I'm pretty sure it's because windows keeps trying to access it and failing.
View 2 Replies View RelatedI've bought new PC, and installed win 7 first. Then i've resized my disc and left the half of it unallocated for my ubuntu. But the ubuntu installer doesnt see my hard disk. when i run fdisc -l, the only thing that i see is my usb from wich i'm booting. I know that this is a common problem, searched for help on the web for hours and nothing worked.
View 9 Replies View RelatedSometimes when I do anything write heavy such as transferring backup or downloading large files from the net, the machine crashes almost completely.
View 8 Replies View RelatedMy 13 year old Pentium 3 1.3 ghz machine is finally ready to call it quits. specifically, my slave drive where all of my music is stored. I can access a very small portion of the the files on the HD, The files are still there but are not showing up. any ideas on how I could access this drive. I wanted to try to reinstall my os on the primary drive in hopes that it wouldget it working, unfortunately I've run into what's seems to be a common problem of my usb keyboard not being recognized.
View 1 Replies View Relatedstart getting Linux up and running. Like a lot of people, I chose an older computer I could fuss with, a 500mhz 256meg ram machine, and decided to install Puppy on a spare 40meg hard drive I have, as my bios does not boot from usb...I think...
Anyway, I have found that my bios does not recognize the hard drive when formatted to ext2! I have taken the drive and formatted it back to ntfs, and my bios recognizes it, and then back again to ext2, and nope, it's not there, thus I am still booting puppy from the cd...sigh...
Is my bios so out of date that I'm just out of luck? Is there anyway to check this?
getting freespire to recognize my 2nd hard drive and allow me to use it for things I want to save there and such. I also cannot get CNR to come up in my browser and need some information as to how to install programs.how to find installable programs,and install them.
View 1 Replies View RelatedLong time Slack user, thought I would try to update my old laptop (Toshiba Satellite with AMD K6-2 333 MHz, 128 MB RAM, 40 GB hard drive) from 10.2 to 13.37 in celebration of the newest version :-)
By update, I mean a complete wipe and reinstall, just to be clear.
So 10.2 runs well, everything looks shiny (XFCE of course) but when I try to install 13.37 I run into trouble. I figured out to boot with huge.s instead of hugesmp.s, but when I try to run 'setup' I get an error that says I have no partitions. mkay, I try fdisk (or cfdisk), but I get literally NO response - no error, no nothing but a return to the command promt. It is exactly as if fdisk does not recognize there is a hard drive there at all.
I boot back into 10.2,check the BIOS, everything looks fine, I have a drive mounted at /dev/hda1, swap at /dev/hda3. Are there some additional parameters I should be booting with? Does it matter that the hard drive is ATA?
VMware virtual machine with the RedHat9 can not recognize win7 hard drive, so can not be mount,how to solve? Situation is showed in the Figure,when type the command ,it do not display the hard disk, the picture is below [URL]
View 7 Replies View RelatedI have been trying to install centos on my hp servers and when i get to partitions my hard drives the OS does not detect any harddrives. I have 4 scsi drives and i believe a intergrated smart array controller.
View 1 Replies View RelatedI have 4 hard drives in my computer...2x 74gb raptorsand 2x 640gb caviar blacksi just wiped windows 7 from the first raptor to install linux... now when i try to install linux it tries combining the 2 raptors as a raid (which i don't have them set up for)i just want to install it on my 1st raptor.i disabled the dmraid and that took care of it trying to combine them as a raid, but then it won't recognize either of the raptors.so i try gparted to format them. and i succeed.but when i try to install again. it still doesn't recognize the raptors... and only my 640gb blacksso i disconnected the power from the blacks... but to no avail, now no hard drives show up when i'm trying to install ubuntu... i am stumped.sorry if that doesn't make much sense... ask questions and i will be glad to answer them, its very frustrating.
View 6 Replies View RelatedI've just installed CentOS 5.4 on my Thinkpad T43. Everything works fine except one thing that, when I suspend the machine, the hard disk is always shut off in a "hard way". The sound is similar to the one you would hear when shutting down the machine by keeping pressing on the power button.. this is no good.
View 3 Replies View RelatedWhen you run a Linux live CD it automatically detects your hardware configuration, or at least tries to. Say you got a live CD and it works perfect on one computer, detects all the hardware. If you install the operating system from the live CD to a hard drive, does it only install the drivers you need for your hardware?
If so, say you were to hypothetically do that on a removable hard drive that you lock and unlock with the hardware keys; would that mean if you want to move the drive from one computer to another regularly, the OS would not be configured properly on a different hardware configuration, and wouldn't be able to configure itself properly because it is now on a hard drive? I know that Linux does try to detect new hardware each time it boots, but I guess the short version of the question is: Does installing a distribution on a live CD to a hard drive mean you will not have all the drivers available on the CD?
This is not something I am sure I will ever plan to do, but it would be no different than if you wanted to swap your drive into a new computer. If it could at least still connect to the Internet it might try to reconfigure itself. If installing the live CD means you get absolutely all the contents on the CD, that would answer my question. Maybe someone might know exactly how that would work.
My dvd is broken. I always failed to install centos from network because of wrong configuration of tftp server. I'd like to install centos from harddrive. I got a litle application named grub4dos, I try to use it but never succeded. Therefore, I have tow questions:
1. How to install Centos from / through hard drive? 2. Where should I put the Iso file of centos or centos installation files, if i use grub4dos.
I am using ubuntu 10.04. I want to set up authentication to mount hard disk and other removable devices.
View 5 Replies View RelatedI have set up VNC on my Centos5 Server via the instructions here:
[URL]
I am able to log in via VNC through a browser (on my Window laptop), however when I try to access my USB hard drive on the Centos Server, it says:
Error org.freedesktop.DBus.Error.AccessDenied
Does anyone know of any step by step instructions so that I can be able to access my USB Hard drive?
I have found a few posts on the internet about this, however the fixes are either vague/hard to understand etc?
I downloaded the CentOS 5.5 Live CD iso, booted from it, and I like it. I would like to install CentOS 5.5 on my new system, but there do not appear to be any options for hard drive installation, partitioning, etc...
View 5 Replies View RelatedI have an old Linux server, but now the hard drives are reformatted. I want to use this as a test server before I do anything on our live server. Our live server is running CentOS 5 so I would like to install CentOS 5 on this server, however the mother board does not seem to recognize the CD ROM any more, and I have tried other CD ROMs - So, the .iso file I down loaded from CentOS's mirrors can't be installed that way.I have a windows machine and I was wondering if I could just dump the .iso file onto one of the reformatted hard drive and then reinstall it into the server?
View 2 Replies View RelatedI have installed the CentOS 5.4 Virtualbox, I downloaded the dvd.iso on my (windows xp) and I installed it straight from there.
Installation went ok, but whenever I start the Centos it boots from the dvd.iso and force me to install or upgrade it again.
i have 3 desktop computer which all have same configuration all installed with centos 5.4.Is there any method that using yum i can download and store apps in one of the place of hard drive and execute in the same time and using yum local install can i install this apps on other computers.
View 1 Replies View RelatedThe motherboard currently installed on my PC has a RAID Utility (Ctrl+I) at the startup that allow creating RAID1. But I already have a system installed with CentOS 5.4. In order to protect my data, I need RAID1. Can I add another Hard Drive now and have the data mirrored and synced onto both hard drives as if it was in RAID1 right from the beginning?
View 2 Replies View RelatedI used to have all my mp3s, photos, etc. on a Seagate "Freeagent" removable USB drive and share it over a Windows network. We've gone all Linux in the house and I tried to export the same drive over NFS (got the NTFS support installed, ntfs-3g) but get this error:
Code:
Starting NFS services: exportfs: Warning: /media/FreeAgent Drive does not support NFS export.