Ubuntu :: My Computer Won't Recognize My Hard Drive
Apr 4, 2010
So I tried to install Ubuntu on my Acer Aspire ASE380 desktop, and I think during the partition portion. I think I messed up the hard drive.
Now my computer won't recognize my hard drive. I've tried using the acer repair disks I made, I tried unplugging and checking all the cords and lines, I tired flashing the BIOS, I've tried using other boot disks like Ultimate boot CD, and Acer support is no help either.
I really don't know what to do now. It shows nothing in the boot setup or the BIOS set up. I've also tired the ALT - F10 for acer computers to enter and repair partition and nothing.
I just want to get this thing up and running. I'm tempted to just buy a new hard drive.
View 2 Replies
ADVERTISEMENT
Dec 22, 2010
I have Ubuntu installed on a separate drive. Dual boot with win XP. It was working out fine..Then, and I don't remember exactly when, the boot process was interrupted saying Drive 2 not found..the Ubuntu drive. So I press F2 and enter BIOS setup. I have to cycle through the drives to #2, select 'on', then leave BIOS setup. OK so far..I can confuse myself.. Anyhow, my computer will then continue to the Dual boot screenWindows will load fine, but Ubuntu goes to a command line screen for grub>.When I push 'Esc' I go to a screen with several commands listed, most of which return me to the grub> prompt..the 'reboot' command sends me back through the Bios process, the 'halt' command shuts down the computer. Grub> wants something and I don't know what it is. Do you think I'll have to reinstall? Bad hard drive?I'd like to get my Ubuntu back really just getting to get a feel for the system.
View 1 Replies
View Related
Aug 3, 2010
I've been trying for hours now to get Ubuntu 10.04 Netbook Remix onto my HP Mini 1030NR. It boots up fine from the flash drive, but then when I go to install UNR on the hard drive I get through the first 3 steps and then get stuck. It goes to the "Prepare partitions" screen but no devices are shown to be partitioned. I formatted the hard drive I'm trying to install on on another computer to NTFS, so it should be blank and ready to go? I should probably mention the drive doesn't show up in GParted either. Is there something obvious I'm overlooking?
I've tried the methods suggested in this thread to no avail: [URL]
View 1 Replies
View Related
Jun 10, 2011
I am trying to install Ubuntu 11.04 64bit on my computer, I downloaded it onto my flashdrive from [URL]... When I reach the installation screen all the boxes are checked except 4.4Gb of space available, I know I have enough space because I am using a 1TB hard drive, I also have Windows 7 installed and it recognizes my hard drive. I have tried this with my hard drive partitioned and unpartitioned. I only have 1 hard drive and it has never been part of a raid array. I've also looked on google and the Ubuntu forums and still can't find anything relevant
View 1 Replies
View Related
Jun 13, 2010
No matter what i put into the drive be it a music cd, a dvd, or a game, my computer WILL NOT recognize it. It's like it doesn't even exist to my computer I'm trying to play rollercoaster tycoon and this is causing a slight problem
View 11 Replies
View Related
Feb 1, 2010
Is it possible to have a tri-boot system ? I currently have a dual bootsystem on mydesktop. Win XP & Ubuntu. I want to add SUSE 11.2 but don't know how to go about loading it onto my machine. On restart the computer does not recognize the CD in my rom drive and only asks if I won't to load Windows or Ubuntu. How do I go about adding another OS to my hard drive ? I have an old Gateway with 130Gb hard drive and plenty of unallocated drive space and 512Mb of Ram. I use Windows rarely (almost never but do need it for some applications) and mostly rely on Ubuntu which my wife and I both like and use daily but I want to look at and experience other Linux installations as well
View 5 Replies
View Related
May 31, 2010
Is there any way to make windows recognise my second hard drive (Which is fully exclusive to ubuntu) and access it? Iv'e been getting a few BSOD's since installing ubuntu and I'm pretty sure it's because windows keeps trying to access it and failing.
View 2 Replies
View Related
Dec 10, 2010
I've bought new PC, and installed win 7 first. Then i've resized my disc and left the half of it unallocated for my ubuntu. But the ubuntu installer doesnt see my hard disk. when i run fdisc -l, the only thing that i see is my usb from wich i'm booting. I know that this is a common problem, searched for help on the web for hours and nothing worked.
View 9 Replies
View Related
Apr 1, 2009
There are 3 IDE drives in this box.
hda has Debian Lenny installed (with swap) and is to remain.
hdb1 has a linux distro on it.
hdb2 is a data partition and is to remain.
No other partitions on hdb.
HDD is data only (not really relevant but mentioned for completeness)
The system boots via Grub from MBR on hda.
I'm trying to install F10-i686-KDE-LiveCD on hdb1 but F10 won't allow it without modifying the partition tables which will, of course, wipe my data on hdb2. hdb seems to be a happy disk; e2fsck shows it clean and both partitions open properly in Konqueror within the LliveCD.
View 4 Replies
View Related
Apr 12, 2010
My 13 year old Pentium 3 1.3 ghz machine is finally ready to call it quits. specifically, my slave drive where all of my music is stored. I can access a very small portion of the the files on the HD, The files are still there but are not showing up. any ideas on how I could access this drive. I wanted to try to reinstall my os on the primary drive in hopes that it wouldget it working, unfortunately I've run into what's seems to be a common problem of my usb keyboard not being recognized.
View 1 Replies
View Related
Apr 18, 2009
I have this laptop that I just reformatted in hopes of doing a dual boot between XP and FC4. It is an Acer Aspire 5315-2153 (the Wal-Mart special). I reformatted the drive; the Windows partition is in NTFS and then I have a 10GB partition in FAT32 for Linux. When I try to install FC4, the disk boots into the installer, then it tells me that it does not recognize any hard drives (the disk in this laptop is a Hitachi HTS541680J9SA00). It asks me if I want to load any drivers, and I tried a few and still no success. Any way, after it goes through that, it tries to start anaconda and after that launches it goes to a black screen and nothing happens. So, did I do anything wrong in the Windows install that won't allow the disk to be found? The XP disk only allows a format in NTFS, otherwise I would have done FAT32 on the whole drive. Second, is the anaconda problem something related to the HDD issue, or does anyone think that it may be a separate issue?
View 14 Replies
View Related
Jul 8, 2011
I have a samsung removable hard drive, which have 3 fat32 partitions on it. When I plug into the usb. nothing happened and i just see a sdc was added in /dev/...so, there's nothing wrong with the drive, because i can use it on windows and ubuntu.
View 10 Replies
View Related
May 2, 2010
start getting Linux up and running. Like a lot of people, I chose an older computer I could fuss with, a 500mhz 256meg ram machine, and decided to install Puppy on a spare 40meg hard drive I have, as my bios does not boot from usb...I think...
Anyway, I have found that my bios does not recognize the hard drive when formatted to ext2! I have taken the drive and formatted it back to ntfs, and my bios recognizes it, and then back again to ext2, and nope, it's not there, thus I am still booting puppy from the cd...sigh...
Is my bios so out of date that I'm just out of luck? Is there anyway to check this?
View 5 Replies
View Related
Jun 13, 2010
getting freespire to recognize my 2nd hard drive and allow me to use it for things I want to save there and such. I also cannot get CNR to come up in my browser and need some information as to how to install programs.how to find installable programs,and install them.
View 1 Replies
View Related
Jul 19, 2011
Long time Slack user, thought I would try to update my old laptop (Toshiba Satellite with AMD K6-2 333 MHz, 128 MB RAM, 40 GB hard drive) from 10.2 to 13.37 in celebration of the newest version :-)
By update, I mean a complete wipe and reinstall, just to be clear.
So 10.2 runs well, everything looks shiny (XFCE of course) but when I try to install 13.37 I run into trouble. I figured out to boot with huge.s instead of hugesmp.s, but when I try to run 'setup' I get an error that says I have no partitions. mkay, I try fdisk (or cfdisk), but I get literally NO response - no error, no nothing but a return to the command promt. It is exactly as if fdisk does not recognize there is a hard drive there at all.
I boot back into 10.2,check the BIOS, everything looks fine, I have a drive mounted at /dev/hda1, swap at /dev/hda3. Are there some additional parameters I should be booting with? Does it matter that the hard drive is ATA?
View 11 Replies
View Related
Jun 9, 2010
VMware virtual machine with the RedHat9 can not recognize win7 hard drive, so can not be mount,how to solve? Situation is showed in the Figure,when type the command ,it do not display the hard disk, the picture is below [URL]
View 7 Replies
View Related
Aug 19, 2010
My friend gave me his old computer but he kept the hard drive, I have a computer with a 200 gb hard drive. could I partition the hard drive and have the computer my friend gave me access the other partition without having to take the hard drive out and connect it to the other computer?
View 4 Replies
View Related
Jan 20, 2010
I have 2 computers, one running ubuntu 9.10 Karmic and the other runs Windows 7.
I have several sata hard drives that I keep files on. They are all formatted ext3. I have a blacx sata to usb dock on my ubuntu computer that I use to go through files and back up and such. I have a usb to sata dock on the windows 7 machine.
When I plug in the hard drive Windows says that it has to be formatted and the drive is "raw"
I can check the drive in ubuntu and everything is right
I tried installing ext2fsd and it sees the drive but wont let me select any file type or mount it. I think because its going through the usb port.
So how can I make windows 7 see and be able to access an ext3 formatted drive thats plugged into the usb port?
View 1 Replies
View Related
Apr 12, 2010
I have posted in regards to fixing some problems I had after running recoverjpeg, and most are fixed. However, this process (recoverjpeg) continues to find pictures and dump them into my hard drive. I am fighting an uphill battle. Is there a way to stop a program from running continuously? I removed the package, but it continues to find files on my computer and put them into my hard drive, which is a problem.
View 2 Replies
View Related
Jul 21, 2010
In my system i have 3 250 GB Hard drives in a RAID 5 configuration. unfortunately, i cannot see this volume in "Computer", so i am unable to access any of the files on the volume. wierd thing is that when i enter disk utility, it finds the drives, and recognises them as a RAID volume. any ideas on how i can access the files on this drive
View 3 Replies
View Related
Aug 4, 2010
I got a problem with the motherboard of my computer and now I need to get some files out from the hard drive (an ext3 partition). I can access the files from another computer but because of the permissions of my user it doesn't let me copy the files over to another drive.
my computer was running Kubuntu 8.10 with a Vista dualboot. I also tried attaching the hard drive to another laptop, but because of the video drivers the display doesn't function properly.
View 4 Replies
View Related
Apr 16, 2011
I want to make my own raid array, that is essentially identical to one of those commercially available external raid drives.The only thing is, I want to do this by using a dedicated computer as the drive, and connecting it to another computer to use as the server. Is there some way to do this. Maybe make a sata port on the raid computer appear lixe a hard drive to the server. Or use a usb 'crossover' cable to connect the 2.Is this even possible, or should I just use the raid computer as the file server too?
View 3 Replies
View Related
Jan 12, 2010
What I want to do is pull data from any of the hard drives attached to my Linux box from my Windows machine. I have been moving small amounts of data from the drives to my OS drive and those parts share easily, but I want to move away from that method to move large amounts of data at the same time.I have tried using Samba as it is used for file sharing between systems and that I have to give my Windows box permission through Samba.
Trick is, I'm not sure where to start, though I have an idea and wanted to know if this is the right track before I start editing my file system.
View 3 Replies
View Related
Dec 14, 2010
in windows 7 we can see the free space on each drive from my computer,but i am not able to see the free space on a drive from computer window in ubuntu 10.04
View 3 Replies
View Related
May 16, 2011
I have a dell inspiron 9300. I have Ubuntu 10.04 LTS.on't have the root password.Something I'd like to do would be to have two separate ubuntu's on my computer. I'd like to keep this one just as it is but also have another ubuntu-same version- that I can boot up into, and have it default booting up into the old one. How exactly do I do this? I know very little about computers. I barely mastered registration for this site, and copy/paste is a rather new skill for me.
View 2 Replies
View Related
Oct 28, 2009
I have Fedora running on my computer at school and have been informed we are getting new computers.
Can I simply move my hard drive to the new computers? I don't have to reinstall do I? Would I have to use a new kernel?
View 14 Replies
View Related
Jul 9, 2010
My macbook pro stopped booting yesterday due to some file system corruption in the hard drive. I am able to access this drive through a linux live cd which I am using now but when I go to some folders it says "Could not enter folder /media/Macintosh HD/..." My question is how do I give myself the permissions to be able to access these files and transfer them to a network drive?
View 1 Replies
View Related
Nov 27, 2010
Computer Does Not Turn On When Hard Drive Is Connected but when I remove my Hard Drive it works as noramal.
View 13 Replies
View Related
Jan 12, 2010
I finally got my new internal hdd for my laptop. I plugged it in and installed windows 7 64 bit. Then I partitioned my external hdd (WD mybook 640gb), and installed ubuntu 9.1 on a 200gb partition of it. The problem is that I didn't unplug the internal hdd before I installed ubuntu. Now the computer will not start unless I have the external hard drive plugged in.
So what should I do so that I will be able to go into windows 7 normally if the external hdd is unplugged? I would also like to be able to use ubuntu when I plug in the external hdd. I wouldn't mind having to go to the boot menu and choosing the external hard drive every time I wanted to use ubuntu.
The reason I partitioned the external hard drive was because it has a lot more space than my 250gb internal hdd, and I also wanted to leave space open to use as was intended, to back up stuff.
However, now that I think about it, I wouldn't mind partitioning the internal hdd and just leaving the external blank (which I should have done in the first place).
View 5 Replies
View Related
Jan 9, 2011
I have a laptop with two partitions, one with Windows XP and one for storage (formatted in NTFS). I would like to install Ubuntu on the storage partition, but my problem is that I can't boot from CD (or anything else) because my BIOS is password protected. I obviously don't know the password. y question is: If I plug the laptop's hard drive into another computer, install Ubuntu as described above and then reconnect it to my laptop, will it work?
View 2 Replies
View Related
