I have Ubuntu 10.10 on my USB stick, and it boots fine. I want to be able to use the PC's hard drive, though, for storage of my files. My PC has WinXP on it and I dont want to lose it either. Is there any way by which I can mount the hard drive whenever I boot using the USB stick so that I can use it for storage?
I have a network where several machines are connected through a switch. I'd like all machines to be able to read/write to/from the hard drives of the other machines. for example:
machine1 will read/write files that are on the hard drive of machine2 machine2 will read/write files that are on the hard drive of machine1 machine3 will read/write files that are on the hard drive of machine1 machine3 will read/write files that are on the hard drive of machine2 etc etc...
all of this reading/writing will be done through the terminal, and programatically. rather than SSHing into a machine to read/write files from it, I'd be happy to set up some 'conventions' on how to access hard drives of various machines. for example:
'hdd1' will refer to the hard drive of machine1 (that has the static IP of 192.168.0.1). 'hdd2' will refer to the hard drive of machine1 (that has the static IP of 192.168.0.2). 'hdd3' will refer to the hard drive of machine1 (that has the static IP of 192.168.0.3). etc etc...
this way, when I want to read/write a file, its PATH will be something like ~/hdd1/myfile.txt; ~/hdd2/anotherfile.txt;
I am working on a computer that the hard drive crashed. Inititially they had a virus, reloaded windows, and had the computer up and running. When downloading software it crashed and will not boot. I have tried all the numerous routine fixes with no success including using the repair discs. The repair discs no longer work and they are unable to get a second set. As a last resort I am able to access the hard drive when booting from Knoppix from a CD. There are a couple things I would like to try from Knoppix, but do not know if it is possible. First, Is it possible to load the boot files from knoppix? Second, can you roll back the drivers from knoppix?
At first I thought it was the daily cron jobs, but it's been at it for like 3 or 4 hours. It's driving me crazy locking up my system. I suppose I should get off the computer anyway, no real reason to be on for so long.
The only things that look weird in system monitor is kwin, virtuoso-t and X seems to be higher CPU usage than it should. And CPU usage is 20-50% when I'm not doing anything. It was indexing my files.
A year ago I put some stuff on my external hard drive and now I'd like to retrieve it. I've upgraded through a couple of versions of Ubuntu since then and now it doesn't work. I saw that this is a frequent problem in the forums but couldn't find a solution.
when I load into Ubuntu 11.04 from my USB drive, why can't I access the files on my internal hard drive? I mount the drive but I cannot see any of the music, videos or documents contained on that drive (which is also an Ubuntu 11.04 drive). I was wondering so I could copy those files onto my external hard drive and reinstall since my Ubuntu crashed.
I would like to access my NSA-220 Plus through the Internet without having computer turned on. I tried to set it up as a FTP server but I was not successful. I tried few tutorials but all allow me to access NSA-220 Plus only within my home network which is not what I want. Also I tried user manual which does not really tell you how to do this.
The hard drive is accessed every few seconds with OpenSUSE and when it is there is a click sound when it is first accessed. I have other distros which dont make the clicking sound when they access the hard drive. I need to prevent opensuse from making the click sound when it does whatever it's doing. Im not even sure what it's doing or what settings to change, and most importantly how do i make it not click? Maybe i could copy settings over from another distro if i knew which settings to replace.
I have been trying to install centos on my hp servers and when i get to partitions my hard drives the OS does not detect any harddrives. I have 4 scsi drives and i believe a intergrated smart array controller.
I am noticing problems accessing the firewall gui and mounting the second hard drive in my PC running Fedora 13. This is only when I am accessing the machine with VNC. If I am sitting in front of the physical machine, I have no problems at all. I would like VNC to behave more like I am sitting in front of the computer. Is there a way to do this? Thank you in advance for your feedback.
I've just installed CentOS 5.4 on my Thinkpad T43. Everything works fine except one thing that, when I suspend the machine, the hard disk is always shut off in a "hard way". The sound is similar to the one you would hear when shutting down the machine by keeping pressing on the power button.. this is no good.
My dvd is broken. I always failed to install centos from network because of wrong configuration of tftp server. I'd like to install centos from harddrive. I got a litle application named grub4dos, I try to use it but never succeded. Therefore, I have tow questions:
1. How to install Centos from / through hard drive? 2. Where should I put the Iso file of centos or centos installation files, if i use grub4dos.
I downloaded the CentOS 5.5 Live CD iso, booted from it, and I like it. I would like to install CentOS 5.5 on my new system, but there do not appear to be any options for hard drive installation, partitioning, etc...
I have an old Linux server, but now the hard drives are reformatted. I want to use this as a test server before I do anything on our live server. Our live server is running CentOS 5 so I would like to install CentOS 5 on this server, however the mother board does not seem to recognize the CD ROM any more, and I have tried other CD ROMs - So, the .iso file I down loaded from CentOS's mirrors can't be installed that way.I have a windows machine and I was wondering if I could just dump the .iso file onto one of the reformatted hard drive and then reinstall it into the server?
i have 3 desktop computer which all have same configuration all installed with centos 5.4.Is there any method that using yum i can download and store apps in one of the place of hard drive and execute in the same time and using yum local install can i install this apps on other computers.
The motherboard currently installed on my PC has a RAID Utility (Ctrl+I) at the startup that allow creating RAID1. But I already have a system installed with CentOS 5.4. In order to protect my data, I need RAID1. Can I add another Hard Drive now and have the data mirrored and synced onto both hard drives as if it was in RAID1 right from the beginning?
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
I would like to setup a CentOS file server with LVM and Raid1. Having 6 x 500GB drives, 4 x 1GB Ram and a Quad Core Cpu, I am considering to configure 3 hdd as LVM then raid 1 to the remaining 3 hdd's.
Recently I built a web server for my clients to host in house. After talking with the web developer they informed me that i needed a CentOS computer with Drupal for them to design the website. This is my first Linux install and after spending hours upon hours configuring the server with FTP, SSH, and configuring our DD-WRT router with proper port forwarding we turned it over to the web designers to start work on the website.
A month goes by and the website is almost done, at this point we go to make a full backup of the hard drive. Due to a hardware problem it fried the circuit board of the hard drive. After attempting to recover the files myself we opted to send it to a HD data recovery facility to recover the information. We have received back a DVD containing the 2GB's worth of data from the CentOS hard drive. It contained 2 folders one for each of the partitions. I can view and see all the files on my windows machine and it appears that all of the data was recovered successfully. I harbored some hope that i could simply reinstall CentOS with the same account information and then just drop the recovered files on top of the new installation and have it start working.
I then reinstalled CentOS on another hard drive in the same computer and used the same credentials for installation. After i successfully booting into CentOS i turned off the machine and connected the hard drive it to my Windows bench machine. After booting into Windows i was unable to browse the hard drive. After doing more research and installing Ext2fsd i was able to see the 2 partitions CentOS had just created, but only able to access the Boot partition. After more research i discovered the default installation of CentOS creates a Raw file type for the 2nd partition and that is why i am having issues reading it inside of Windows.
I then downloaded a copy of Knoppix to see if this would allow me to write the old files over the new ones. After booting up the CD i could only browse to the /boot drive(and im not even sure if this is Knoppix's Virtual /boot or my CentOS /boot).
My question is what would be the best steps to recovery for my scenario? Can the files be placed to the drive and have everything restored? Is the only way to recovery thru reinstalling all applications and reconfiguring from scratch? How difficult is Drupal DB to recover in this type of scenario?
I added a formatted LVM hard drive ( hdb: WDC WD800BB-55JKC0, ATA DISK drive) to my current server. I need to review its contents, save any data I need, and then reformat the drive and extend the current systems LVM to include the new drive. I am unable to mount the new drive using the following steps and need to mount the LVM new drive. As I explain below, I have learned that I am not supposed to directly mount an LVM volume. Here is the work I have done to date,.
1. MAKE SURE THE DRIVE IS FOUND: dmesg | grep drive hda: MAXTOR STM3160215A, ATA DISK drive hdb: WDC WD800BB-55JKC0, ATA DISK drive
By using ISO2USB for CentOS/RedHat I installed with out having to burn A single cd or dvd. Super easy and free from source forge. Link[URL]... Unplug the USB drive and take it to the machine to be installed.Reboot the machine and choose USB boot option in the BIOS boot menu. Choose Hard drive installation method and select /dev/sdb1 as partition that holds ISO images. Use sda drive for installation and choose to review the partitioning layout. In advanced bootloader options, change drive order to "sda sdb". Proceed with the installation.
So easy it should be a tool in every admins box. I hope I saved you some time and headaches.
For starters, I apologize if this turns out to be a double post. My windows laptop hiccupped in the middle...
So I had a Linux box with two drives running happily for years. Both drives were in the same logical volume, and the second had a file system on it.
The the boot drive croaked. I replaced it and reinstalled CENTOS (making sure, of course, to be careful to use the new drive). The I put the second drive back into the volume group (and that's it).
I'm assuming I probably need to create a new logical volume, because that's how it was before, but I really really don't want to format it.
Am I missing a step or am I screwed?
Fsck -l showed the following output both before and after I put the drive in the volume group. code...
My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
I have a samsung removable hard drive, which have 3 fat32 partitions on it. When I plug into the usb. nothing happened and i just see a sdc was added in /dev/...so, there's nothing wrong with the drive, because i can use it on windows and ubuntu.
I am about to purchase a new external hard drive which will be driven through the USB port. It will probably be a 1.0 TB drive from Frys/CompUSA/MicroCenter or some discount source. It will probably come formatted to run on a Windows machine and I intend this drive to be run only from my Linux laptop. I'd like to format it to be able to make the most of it from my Linux machine. Although re-formatting may not be absolutely necessary, as it probably will work "OK" just out of the box as is, how can I format it to get the maximum usage out of this new drive?
