Ubuntu Installation :: Installation Will Not Recognize Hard Drive?
Mar 3, 2010
I have 4 hard drives in my computer...2x 74gb raptorsand 2x 640gb caviar blacksi just wiped windows 7 from the first raptor to install linux... now when i try to install linux it tries combining the 2 raptors as a raid (which i don't have them set up for)i just want to install it on my 1st raptor.i disabled the dmraid and that took care of it trying to combine them as a raid, but then it won't recognize either of the raptors.so i try gparted to format them. and i succeed.but when i try to install again. it still doesn't recognize the raptors... and only my 640gb blacksso i disconnected the power from the blacks... but to no avail, now no hard drives show up when i'm trying to install ubuntu... i am stumped.sorry if that doesn't make much sense... ask questions and i will be glad to answer them, its very frustrating.
I've been trying for hours now to get Ubuntu 10.04 Netbook Remix onto my HP Mini 1030NR. It boots up fine from the flash drive, but then when I go to install UNR on the hard drive I get through the first 3 steps and then get stuck. It goes to the "Prepare partitions" screen but no devices are shown to be partitioned. I formatted the hard drive I'm trying to install on on another computer to NTFS, so it should be blank and ready to go? I should probably mention the drive doesn't show up in GParted either. Is there something obvious I'm overlooking?
I've tried the methods suggested in this thread to no avail: [URL]
I am trying to install Ubuntu 11.04 64bit on my computer, I downloaded it onto my flashdrive from [URL]... When I reach the installation screen all the boxes are checked except 4.4Gb of space available, I know I have enough space because I am using a 1TB hard drive, I also have Windows 7 installed and it recognizes my hard drive. I have tried this with my hard drive partitioned and unpartitioned. I only have 1 hard drive and it has never been part of a raid array. I've also looked on google and the Ubuntu forums and still can't find anything relevant
I've bought new PC, and installed win 7 first. Then i've resized my disc and left the half of it unallocated for my ubuntu. But the ubuntu installer doesnt see my hard disk. when i run fdisc -l, the only thing that i see is my usb from wich i'm booting. I know that this is a common problem, searched for help on the web for hours and nothing worked.
There are 3 IDE drives in this box. hda has Debian Lenny installed (with swap) and is to remain. hdb1 has a linux distro on it. hdb2 is a data partition and is to remain. No other partitions on hdb. HDD is data only (not really relevant but mentioned for completeness) The system boots via Grub from MBR on hda.
I'm trying to install F10-i686-KDE-LiveCD on hdb1 but F10 won't allow it without modifying the partition tables which will, of course, wipe my data on hdb2. hdb seems to be a happy disk; e2fsck shows it clean and both partitions open properly in Konqueror within the LliveCD.
I have this laptop that I just reformatted in hopes of doing a dual boot between XP and FC4. It is an Acer Aspire 5315-2153 (the Wal-Mart special). I reformatted the drive; the Windows partition is in NTFS and then I have a 10GB partition in FAT32 for Linux. When I try to install FC4, the disk boots into the installer, then it tells me that it does not recognize any hard drives (the disk in this laptop is a Hitachi HTS541680J9SA00). It asks me if I want to load any drivers, and I tried a few and still no success. Any way, after it goes through that, it tries to start anaconda and after that launches it goes to a black screen and nothing happens. So, did I do anything wrong in the Windows install that won't allow the disk to be found? The XP disk only allows a format in NTFS, otherwise I would have done FAT32 on the whole drive. Second, is the anaconda problem something related to the HDD issue, or does anyone think that it may be a separate issue?
I'm trying to install 10.04 but during the Prepare Partitions step no hard disk is listed for me to partition.
The hard disk is a Seagate SATA (7200.7) drive and my motherboard is a Gigabyte GA-MA770-UD3. The hard disk works because I just installed a fresh copy of Windows XP on it without a problem and the OS on the disk prior to this was an older version of Debian.
Does anyone know how I can get my hard disk listed so I can install 10.04?
When I'm installing Red Hat 7, an error was occurred, in fact the installation process does not recognize my hard driver? how can resolve this trouble?
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
I intend to install ubuntu server 10.04 on an IBM blade server x3550 m3. The server has two SAS and two SATA II hard drives, each configured as RAID 1 through a ServeRAID m1015 card. However, ubuntu didn't recognize any hard drives at the installation.
Is there a way that I can load raid driver (if exists) during installing Ubuntu?
So I tried to install Ubuntu on my Acer Aspire ASE380 desktop, and I think during the partition portion. I think I messed up the hard drive.
Now my computer won't recognize my hard drive. I've tried using the acer repair disks I made, I tried unplugging and checking all the cords and lines, I tired flashing the BIOS, I've tried using other boot disks like Ultimate boot CD, and Acer support is no help either.
I really don't know what to do now. It shows nothing in the boot setup or the BIOS set up. I've also tired the ALT - F10 for acer computers to enter and repair partition and nothing.
I just want to get this thing up and running. I'm tempted to just buy a new hard drive.
10.10 installation fails: not paritition nor hard drive visible, Gparted does not start: trying to install 10.10 as a 2nd boot to windows Xp MCE installation. I get the the stage "allocate drive space", but there is not device nor hard drive visible. if I click install now I get an error message, no root file system defined. please correct this from the partitiioning menu.If I sart GPARtition, it does not start.I am totally lost, I have two parititions on hard drive that i created with fresh XP MCE installation, one dedicated to XP, other I reserverd for Ubuntu. Neither one is viisible at the installation.
I disconnect my internal Windows hard drive first. Then run the installer from the Desktop CD. Everything works great.This is approximately the steps I take: I reboot, everything is good. I reconnect my internal hard drive, boot to Windows, reboot back to Kubuntu, everything is still good. I run updates and follow the instructions of the Comprehensive Multimedia & Video Howto. I reboot again, still no problems. At this point, I figure everything is OK and I have no worries. I boot to Windows and do some work in that environment. The next time I boot to the external Kubuntu hard drive, I get the following errors:
Begin: Starting AppArmor profiles ... mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /dev on /root/dev failed: No such file or directory
My original intention was to install a distribution of Ubuntu onto an external hard drive so i can use it on different computers. I first downloaded and burned a copy of Ubuntu 10.10 and booted my Acer laptop to it. I then plugged in my external hard drive and tried to install ubuntu onto it by partitioning the external hard drive. After I did that, I booted from the external hard drive on my laptop and it ran the new distribution i created. However, when I tried to boot it from a different computer it said something like "partition not found." So the next time I tried to install ubuntu onto the external hard drive with out partitioning it, using the entire drive. This is what started to cause problems.
Now when I start up my laptop without the external hard drive plugged in i get "error: no such device: xxxx..... grub rescue>. When I start it up with the hard drive plugged in a grub comes up with the new installation, my old ubuntu installation, and my old windows vista.
After lot's of research i still can't find any solution to my problem, that's why i'm posting a message here.So, it's been few days now that i'm trying to install ubuntu 10.10, with the live CD, but each time when i must choose where to install it or how to make partition, it just tell me there is no hard drive..(i have two 1 TB sata hard drive )So i tried many things, GParted doesn't find my hard drive either, they appear in the bios (i can run windows), try to uninstall a raid program that might hide the hard drive, but it didn't work either.
So i came to see that i had Marvell 9123 which seems to be a SATA controller, and few people seems to have some similar issue with that Marvell stuff..I'm quite desperate now.. i tried to install ubuntu on a USB drive but my computer just doesn't boot on it (i tried this method for the sb drive URL...
Is there any way to make windows recognise my second hard drive (Which is fully exclusive to ubuntu) and access it? Iv'e been getting a few BSOD's since installing ubuntu and I'm pretty sure it's because windows keeps trying to access it and failing.
Ive an IBM Thinkpad T41 that im hoping to isntall Ubuntu on. I installed it with dual boot as windows xp was already on it and all went fine. Now Ive downloaded the lastest Ubuntu release and burnt it to disk. I have several spare hard drives that will slot internally into my Thinkpad Most if not all are formated to NTFS My question is, and believe me i have search for days about this. From what I have searched, -I dont need to format this drive to ext3 to install ubuntu? -However any drives Ive tried all NTFS and tried booting from the CD just cause my installation to hang, just boots to a black screen -The same CD will allow me to install a dual boot so I know its not the Disk. Do i need to format my drive first? I dont want a dual boot system I just want a fresh install
I am helping my pal to get into Debian (yes first timer).He is running W7 on a 500G SATA HDD and he has another 250G SATA HDD that he wants Debian to go to.Will Debian install grub on the master bootloader even if the installation is going on a separate hard drive?I have dual boot before but on the same hard drive.
My 13 year old Pentium 3 1.3 ghz machine is finally ready to call it quits. specifically, my slave drive where all of my music is stored. I can access a very small portion of the the files on the HD, The files are still there but are not showing up. any ideas on how I could access this drive. I wanted to try to reinstall my os on the primary drive in hopes that it wouldget it working, unfortunately I've run into what's seems to be a common problem of my usb keyboard not being recognized.
I would like to install Fedora 11 on an ASUS P5L-VM 1394 motherboard with a 3 GHz Pentium 4 CPU. This is an LGA775 socket mobo with a Intel 945G chipset. Two SATA hard drives are plugged into SATA ports. An IDE DVD drive is plugged into the IDE/ATA port. Using the 32 bit Fedora 11 installation disk, I have seen two cases:
1) No hard drive recognized. When i get to the disk configuration screen, there are no options to choose from.
2) By monkeying around with the BIOS settings or switching the SATA ports the disks are connected to, I can get an alternative mode in which no drivers are found for the DVD drive either.
Currently, a version of Ubuntu is installed. UPDATE: The board was purchased in a P3-PH4C barebones, which for unknown reasons requires a different BIOS issue than the regular P5L-VM 1394. Updating to the most recent BIOS does not resolve the problem. One the installation procedure fails to recognize the hard drives, going into a shell and examining the boot up log shows that the kernel recognized both hard drives. So it's down to why the installation procedure is not recognizing them.
I have just changed my OS from Vista to Linux Fedora 10. After looking at my system I notice my SATA drive was not recognised its my 2nd drive. Is this a normal think or can it be fixed.
System was working reliably. Moved components into a new case. Now system will not boot. Either gives error that the disk is not bootable or displays the motherboard configuration screen.
I am able to boot Debian with a USB drive and have attempted fixes in "rescue mode".
I confirmed that the system is booting to EFI mode.
I have tried re-installing the grub-efi package and re-creating the Grub config file with update-grub.
When re-installing Grub I receive "Discarding improperly nested partition ..." warnings but the installation succeeds. I have searched this warning message and the forums seem to say that it can be ignored.
I have tried re-setting the motherboard NVRAM using the jumper block.
The computer shows "debian" as a boot choice in addition to the usual raw drive model listing. However, neither of the choices will boot successfully.
I would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
I have a samsung removable hard drive, which have 3 fat32 partitions on it. When I plug into the usb. nothing happened and i just see a sdc was added in /dev/...so, there's nothing wrong with the drive, because i can use it on windows and ubuntu.
start getting Linux up and running. Like a lot of people, I chose an older computer I could fuss with, a 500mhz 256meg ram machine, and decided to install Puppy on a spare 40meg hard drive I have, as my bios does not boot from usb...I think...
Anyway, I have found that my bios does not recognize the hard drive when formatted to ext2! I have taken the drive and formatted it back to ntfs, and my bios recognizes it, and then back again to ext2, and nope, it's not there, thus I am still booting puppy from the cd...sigh...
Is my bios so out of date that I'm just out of luck? Is there anyway to check this?
getting freespire to recognize my 2nd hard drive and allow me to use it for things I want to save there and such. I also cannot get CNR to come up in my browser and need some information as to how to install programs.how to find installable programs,and install them.
