I have installed the CentOS 5.4 Virtualbox, I downloaded the dvd.iso on my (windows xp) and I installed it straight from there.
Installation went ok, but whenever I start the Centos it boots from the dvd.iso and force me to install or upgrade it again.
I installed(actually i hope i did) CentOS 5.5.However i can see my HDD in Hard drive menu in bios but HDD doesn't shows in boot menu.
View 10 Replies View RelatedSometimes when I do anything write heavy such as transferring backup or downloading large files from the net, the machine crashes almost completely.
View 8 Replies View RelatedI want to install Fedora by live disk on virtualbox.
1. I ran the live disk, it works.
2. I click "Install to Hard Drive", it shows normal.
3. I complete the installition and reboot.
4. The live disk ran again, where is the OS installed on hard drive? or it was not installed at all?
I would like to install Ubuntu (latest stable) on a VirtualBox machine, set it up, install several apps, and then deploy it on a real PC. I think the main issue is the new hardware (which sould be different from the 'virtual' one). What should I do at that time? Is Ubuntu able to detect and install the new hardware?
View 1 Replies View RelatedI have been trying to install centos on my hp servers and when i get to partitions my hard drives the OS does not detect any harddrives. I have 4 scsi drives and i believe a intergrated smart array controller.
View 1 Replies View RelatedI've just installed CentOS 5.4 on my Thinkpad T43. Everything works fine except one thing that, when I suspend the machine, the hard disk is always shut off in a "hard way". The sound is similar to the one you would hear when shutting down the machine by keeping pressing on the power button.. this is no good.
View 3 Replies View RelatedI have minor problem with upgrading a hard drive. I am running an old pentium lll with two hard drives. On the first hard drive I have two partitions of around 90GB each. On the first partition is installed winXP and on the second partition I have Suse 10.3, both booted by grub and living happily side by side. My second hard drive (which is formatted for windows is only 4GB.
My problem arises when I try to replace the 4GB with a 80Gb hard drive. When I disconnect the 4GB drive the system fails to boot up and complains with error 21.
I have a Toshiba laptop with BIOS that will not recognize USB as a boot medium (I have purchased two USB 'thumb' drives with Distro's that do boot but the BIOS see them as HDD devices!)I did manage to install and boot a distro from the USB HD but ended up with the USB drive having to be connected' to select any of the OS partions, to boot anything.I do realize that somehow, when installing the new distro on the USB drive, I changed the GRUB configuration to be on the USB drive which obviously I did not want, so can
View 5 Replies View RelatedMy dvd is broken. I always failed to install centos from network because of wrong configuration of tftp server. I'd like to install centos from harddrive. I got a litle application named grub4dos, I try to use it but never succeded. Therefore, I have tow questions:
1. How to install Centos from / through hard drive? 2. Where should I put the Iso file of centos or centos installation files, if i use grub4dos.
I'm trying out puppy linux, as I have an old system, and the new Ubuntus do not work on it.
Anyway,I cannot boot from my hard drive but only from the floppy.I'm just not too keen on always booting from the floppy.
Here is the Menu.ls file:
I have set up VNC on my Centos5 Server via the instructions here:
[URL]
I am able to log in via VNC through a browser (on my Window laptop), however when I try to access my USB hard drive on the Centos Server, it says:
Error org.freedesktop.DBus.Error.AccessDenied
Does anyone know of any step by step instructions so that I can be able to access my USB Hard drive?
I have found a few posts on the internet about this, however the fixes are either vague/hard to understand etc?
I downloaded the CentOS 5.5 Live CD iso, booted from it, and I like it. I would like to install CentOS 5.5 on my new system, but there do not appear to be any options for hard drive installation, partitioning, etc...
View 5 Replies View RelatedI have an old Linux server, but now the hard drives are reformatted. I want to use this as a test server before I do anything on our live server. Our live server is running CentOS 5 so I would like to install CentOS 5 on this server, however the mother board does not seem to recognize the CD ROM any more, and I have tried other CD ROMs - So, the .iso file I down loaded from CentOS's mirrors can't be installed that way.I have a windows machine and I was wondering if I could just dump the .iso file onto one of the reformatted hard drive and then reinstall it into the server?
View 2 Replies View Relatedi have 3 desktop computer which all have same configuration all installed with centos 5.4.Is there any method that using yum i can download and store apps in one of the place of hard drive and execute in the same time and using yum local install can i install this apps on other computers.
View 1 Replies View RelatedThe motherboard currently installed on my PC has a RAID Utility (Ctrl+I) at the startup that allow creating RAID1. But I already have a system installed with CentOS 5.4. In order to protect my data, I need RAID1. Can I add another Hard Drive now and have the data mirrored and synced onto both hard drives as if it was in RAID1 right from the beginning?
View 2 Replies View RelatedI got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies View RelatedI would like to setup a CentOS file server with LVM and Raid1. Having 6 x 500GB drives, 4 x 1GB Ram and a Quad Core Cpu, I am considering to configure 3 hdd as LVM then raid 1 to the remaining 3 hdd's.
View 7 Replies View RelatedI am hosting some VPS, and I am wondering the best way to copy the VPS data to a secondary hard drive mounted on /backup on a daily basis.
View 5 Replies View RelatedRecently I built a web server for my clients to host in house. After talking with the web developer they informed me that i needed a CentOS computer with Drupal for them to design the website. This is my first Linux install and after spending hours upon hours configuring the server with FTP, SSH, and configuring our DD-WRT router with proper port forwarding we turned it over to the web designers to start work on the website.
A month goes by and the website is almost done, at this point we go to make a full backup of the hard drive. Due to a hardware problem it fried the circuit board of the hard drive. After attempting to recover the files myself we opted to send it to a HD data recovery facility to recover the information. We have received back a DVD containing the 2GB's worth of data from the CentOS hard drive. It contained 2 folders one for each of the partitions. I can view and see all the files on my windows machine and it appears that all of the data was recovered successfully. I harbored some hope that i could simply reinstall CentOS with the same account information and then just drop the recovered files on top of the new installation and have it start working.
I then reinstalled CentOS on another hard drive in the same computer and used the same credentials for installation. After i successfully booting into CentOS i turned off the machine and connected the hard drive it to my Windows bench machine. After booting into Windows i was unable to browse the hard drive. After doing more research and installing Ext2fsd i was able to see the 2 partitions CentOS had just created, but only able to access the Boot partition. After more research i discovered the default installation of CentOS creates a Raw file type for the 2nd partition and that is why i am having issues reading it inside of Windows.
I then downloaded a copy of Knoppix to see if this would allow me to write the old files over the new ones. After booting up the CD i could only browse to the /boot drive(and im not even sure if this is Knoppix's Virtual /boot or my CentOS /boot).
My question is what would be the best steps to recovery for my scenario? Can the files be placed to the drive and have everything restored? Is the only way to recovery thru reinstalling all applications and reconfiguring from scratch? How difficult is Drupal DB to recover in this type of scenario?
I added a formatted LVM hard drive ( hdb: WDC WD800BB-55JKC0, ATA DISK drive) to my current server. I need to review its contents, save any data I need, and then reformat the drive and extend the current systems LVM to include the new drive. I am unable to mount the new drive using the following steps and need to mount the LVM new drive. As I explain below, I have learned that I am not supposed to directly mount an LVM volume. Here is the work I have done to date,.
1. MAKE SURE THE DRIVE IS FOUND:
dmesg | grep drive
hda: MAXTOR STM3160215A, ATA DISK drive
hdb: WDC WD800BB-55JKC0, ATA DISK drive
[Code].....
By using ISO2USB for CentOS/RedHat I installed with out having to burn A single cd or dvd. Super easy and free from source forge. Link[URL]... Unplug the USB drive and take it to the machine to be installed.Reboot the machine and choose USB boot option in the BIOS boot menu. Choose Hard drive installation method and select /dev/sdb1 as partition that holds ISO images. Use sda drive for installation and choose to review the partitioning layout. In advanced bootloader options, change drive order to "sda sdb". Proceed with the installation.
So easy it should be a tool in every admins box. I hope I saved you some time and headaches.
For starters, I apologize if this turns out to be a double post. My windows laptop hiccupped in the middle...
So I had a Linux box with two drives running happily for years. Both drives were in the same logical volume, and the second had a file system on it.
The the boot drive croaked. I replaced it and reinstalled CENTOS (making sure, of course, to be careful to use the new drive). The I put the second drive back into the volume group (and that's it).
I'm assuming I probably need to create a new logical volume, because that's how it was before, but I really really don't want to format it.
Am I missing a step or am I screwed?
Fsck -l showed the following output both before and after I put the drive in the volume group. code...
I have Window XP on my hard drive and now I can't get it to boot for some reason? I think it might have something to do with the MBR. I removed the drive when I was trying to make a liveCD USB boot drive . Do you think grub took it off or something. Not sure if this is something I can fix in the terminal or not
View 9 Replies View RelatedI cloned a Fedora 12 hard drive to a new hard drive using Seagate DiscWizard. Everything appeared to go well. However the new hard drive will not boot. How do I make it bootable?
View 5 Replies View Relatedcan I boot a pc without hard drive from another pc using the "boot from network"feature in the bios? what distribution should i use can the pc i want to boot from be 64 while the one i want to boot is 32 bit?
View 2 Replies View RelatedI have two SATA hard drives in my slackware 13.1_64 Desktop.
On 1. Drive I have 3 partitions for Win 7:
/dev/sda1 - Some Win 7 boot partition
/dev/sda2 - Win7
[code]....
My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
I have a samsung removable hard drive, which have 3 fat32 partitions on it. When I plug into the usb. nothing happened and i just see a sdc was added in /dev/...so, there's nothing wrong with the drive, because i can use it on windows and ubuntu.
View 10 Replies View RelatedI am about to purchase a new external hard drive which will be driven through the USB port. It will probably be a 1.0 TB drive from Frys/CompUSA/MicroCenter or some discount source. It will probably come formatted to run on a Windows machine and I intend this drive to be run only from my Linux laptop. I'd like to format it to be able to make the most of it from my Linux machine. Although re-formatting may not be absolutely necessary, as it probably will work "OK" just out of the box as is, how can I format it to get the maximum usage out of this new drive?
View 6 Replies View Related