Hardware :: Vertical Flutter & Scroll On External (TV) Monitor
Mar 19, 2011
I (very!) recently installed Mandriva (10.1) on my old-ish HP tx1000 laptop, and cannot connect it to my TV (via the usual external VGA connector) without considerable picture distortion: the image scrolls and wobbles, as if the vertical adjustment is faulty. (One used to get this effect with one's TV if the antenna wasn't properly adjusted.)
I can see both monitors in "Monitor Preferences" - and have tried playing with the parameters available there (there is a general refresh rate setting, but nothing to adjust vertical rate alone), without having any effect on the scrolling distorted image. I can drag windows back and forth between the two monitors, though only the laptop one is usable.
View 5 Replies
ADVERTISEMENT
Jul 20, 2010
I wanna disable the vertical scroll of the track on my aspire one,... Before I did this with Sax2, but now, there is no sax, so??
View 1 Replies
View Related
Jan 20, 2011
I have gpointing devices 1-4 installed on ubuntu 10.10. The vertical and horizontal scrol both used to work. I have the latest 1.1.1 dkms synaptics driver posted in that bug forum. But now the horizontal scroll using two fingers does not work at all. I have it checked under mouse settings AND in gpointing devices. Is this a known bug?
Apparently I can't delete this. It has been solved. Smooth scrolling in Chrome kills horizontal scrolling
View 1 Replies
View Related
Jun 19, 2011
I need a better tutorial than the out of date books I own or I can find using Google. If someone has a place they would recommend, please provide a link. I have a web page that is 3 column. I would like each column to vertical scroll separately. I would also like to keep the jump code in the left column if that is possible. Go here for the my web page and source code. [URL]
View 3 Replies
View Related
May 23, 2010
Just a day ago I did a clean install of 10.04, after wiping the disk clean of 9.10. So far everything's working great. Except for my old dual-screen configuration. A year or two ago I badly wanted to have 2 monitors, where both would share the same desktop/workspace allowing me to drag windows back and forth between the two. After a lot of research, I finally was able to put together (although a probably quite sloppy) xorg.conf file that did the trick for me.
My case is somewhat unique in that my left monitor is horizontal, while my right monitor is rotated 90 degrees, and is vertical. In 10.04, my old xorg.conf file sort of works, but I have problems on my right, vertical screen:
- when I move my cursor onto the vertical screen, when I try to move it above where my left, horizontal screen's boundaries end, my cursor jumps down to the bottom of my vertical screen. I can't access anything with my cursor above this boundary on my vertical screen. Note that my vertical screen's bottom is in aligned with my horizontal screen's bottom, and that the vertical screen sticks up above the horizontal screen, as both have a 1680 x 1050 resolution/widescreen aspect ratio.
- however, it appears that only my cursor is having issues accessing the upper part of my vertical screen. When I maximize windows in this screen, they properly fill it up entirely like they should. (but I still can't access the top parts of these applications with my cursor).
So obviously there must be some boundary managing where my cursor is allowed to go, and another set of rules defining the boundaries that the windows themselves can be shown/take up. Also note that because of my right monitor being rotated vertically, I'm forced to use Xinerama. Can someone help me go through my xorg.conf file, below, to help me get this "simple" cursor issue fixed? I'm sure it's just one minor thing that has to be changed, but I'm not sure what:
Code:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Sun Feb 1 20:21:04 UTC 2009
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder57) Thu Jul 17 18:39:19 PDT 2008
# xorg.conf (X.Org X Window System server configuration file)
[Code]...
View 1 Replies
View Related
Nov 21, 2010
This is my third SLackware install. I installed 10,12, now 13. the Xorgsetup has changed I think, it does not display the screen to choose Horizontal and Vertical settings for the monitor. In addition, how can I set the Refresh rate?
View 2 Replies
View Related
Aug 7, 2011
I am having problems getting my external monitor to work. When I plug in the monitor, both the laptop screen and the external monitor go black. When I unplug the monitor, the laptop screen works again.
When I startup with the external monitor plugged in, neither screen works or teh computer hangs or something.
I have had the external monitor going on a couple of occasions. I did manage to configure my monitors through System Settings > Display. I turned off the laptop monitor as I just want to use the external. But after rebooting, things didn't work.
I have a Thinkpad E420, Fedora 15
View 14 Replies
View Related
Aug 11, 2011
I have an external monitor connected to my laptop (extended display). I always drag the Totem player from the laptop screen to external monitor to watch video files. I wonder, if the Totem player can be set to open in the external monitor automatically, everytime I open it?
View 1 Replies
View Related
Aug 17, 2011
My software and hardware information are as follows. I have Fedora 12 and KDE 4.4.5 installed on a Dell Vostro 1500 laptop. I believe it's a 64 bit processor; it's an Intel Core 2 Duo CPU. The external monitor is a Dell as well.
My problem is that my system does not seem to be detecting an external monitor that I have connected. Everything else is working just fine; however, I would like to have the option of attaching an external monitor. When I plug the external monitor into the laptop, the external monitor remains black and appears to be in power save mode. The results of xrandr -q (with or without the external monitor attached: it doesn't appear to change) are as follows.
Code:
How can I get my laptop to recognize that the external monitor is even connected? Let me know if I can be more specific or provide additional details.
View 5 Replies
View Related
Sep 22, 2010
I recently installed Debian, using the amd64 Network Install .iso. I'm using XFCE4 as my desktop environment, and everything is working well... on my laptop's screen.
My desired setup is to have my laptop sitting on a well-ventilated shelf, closed, and to have an external monitor be my main monitor. I want this because I'm using my laptop as my "home" computer, so it never moves, and I don't like the keyboard/trackpad. My laptop has a VGA output, and I can get my desired setup on my Windows partition (not stating a preference ; just that the hardware CAN do what I want it to).
I've been working my way around the Internet for a few days, now, and I've got the commercial NVIDIA driver installed. If I run sudo nvidia-config --twinview I can get my external monitor to be part of the display, which is great, but it's part of a dual-screen monitor setup, which is not what I want at all, because (a) XFCE's multiple virtual desktops are good enough for me and (b) my graphics card is integrated, and I'm trying to squeeze every drop of performance out of my laptop that I can (1 gig of RAM; the less that my graphics card eats into it, the better). Plus, it'd be annoying to accidentally drop something on my laptop's screen, and then have to dig it out of the shelf in order to undo it. I'm not saying that I'm consistently clumsy, but I'd eventually end up doing it.
View 2 Replies
View Related
Sep 12, 2010
I really enjoyed using Apple's wireless Mighty Mouse and Magic mouse because of their ability to easily touch scroll 360 degrees. Unfortunately, Linux drivers are not provided for these mice.Is there an equivalent wireless mouse that works well in Linux? Ideally with native support or community provided drivers, etc.
View 2 Replies
View Related
Jun 3, 2011
The new scroll tab that 11.04 has appears when you hover over the orange area on the scroll bar. The scrolling arrows are gone.Well this scrolling tab often vanishes before I can click on it to scroll down. Is there a way to revert to the old style, like the scrolling mechanism on these forums? It is nice to have the option of the arrows on top and bottom, along with the scroll tab thing.
View 3 Replies
View Related
May 17, 2011
I have a small problem after connecting a LCD monitor to an acer netbook. I need to figure out how to make the monitor the primary. Right now, the netbook has the panels, but the monitor has the desktop. I would like the panels and desktop on the monitor, even if that means not using the netbook screen. I have a screen shot below. I am running F13 with Gnome.
Edit: Never mind. I figured out how to disable the netbook screen using the function keys on the computer.
View 6 Replies
View Related
Jan 23, 2010
i have my pc connected to my 24 inch lcd monitor via DVI and my laptop via VGA. i noticed ubuntu is slightly more blurry than the pc. would the difference likely stem from the manner of connection or faulty drivers on ubuntu's behalf?
View 4 Replies
View Related
Sep 13, 2010
i know this sounds stupid but on my xubuntu i cant connect my laptop to a monitor it connects on bootup so i can see the startup but i cant change after. ive tried a lot of things and i googled it and searched but no answer i have xubuntu 8.04
View 5 Replies
View Related
Nov 14, 2010
I am trying to view my pc on my new flat screen but am unsure of the settings. I am using ubuntu 10.10. I have been trying (and on ocassion succesfully, but never really understood what I have done) to view my pc through the monitor option under preferences. Selecting the different monitor size but always find my external monitor (ie TV) is to the left, right above or under the screen I see on my PC. Also I am unable to hear my PC through the TV. I should say this is a good quality flat screen and all I am unsure of are the correct settings to use my TV as an external monitor.
View 4 Replies
View Related
May 17, 2010
After the login screen, my laptop screen is active but the external LCD monitor hooked to my laptop goes blank which was active to that point.
Here are quite a few details which might help you in diagnosing the problem
alt + clt + f1 takes the monitor screen to command line but alt + clt + f7 fails to bring it back to GUI. The monitor just freezes!!
Contents /etc/X11/xorg.conf
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
[Code].....
View 6 Replies
View Related
Oct 20, 2015
My system can't seem to detect the external monitor that I've plugged into my laptop using and HDMI cable. The monitor works when I'm booted into Windows so I know that it isn't a problem with the monitor or the cable.
When I run xrandr I get.
Code: Select allScreen 0: minimum 320 x 200, current 1600 x 900, maximum 8192 x 8192
LVDS1 connected primary 1600x900+0+0 (normal left inverted right x axis y axis) 310mm x 174mm
1600x900 60.00*+ 39.99
1440x900 59.89
1360x768 59.80 59.96
1152x864 60.00
1024x768 60.00
800x600 60.32 56.25
640x480 59.94
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
View 4 Replies
View Related
Aug 28, 2009
I installed FC11 on my laptop T43 and the video card is ATI Mobility Radeon x300. Now I have a problem of screen resolution with external monitor:
When I do presentation, I have to mirror the two monitors and both set to 1024*768, which is not perfect.
I remember that when I use RHEL 5 desktop edition, The system can automatically detect the external monitor and set it by itself ----- The laptop uses 1400*1050 and the external monitors such as projector uses 1024*768. But I haven't found such feature on FC11.
View 9 Replies
View Related
May 26, 2011
Previous Fedora releases allowed me to connect to my external monitor via an HDMI-DVI cable to use as my main monitor from my laptop. However, after I did a fresh install of Fedora 15, I have this problem that when I login to gnome 3, both laptop screen and external monitor go blank. I cannot ctrl-alt-f2 to go to terminal. I end up having to ssh from another machine and reboot. Each time, the reboot doesn't even work since I have to go and kill Xorg before it starts to reboot.plymouth and gdm seem to be fine and show up the external monitor. It is only when I login to gnome3 that I get the blank screens.
View 4 Replies
View Related
Dec 25, 2010
I've got an eeePC with a really tiny monitor, so whenever I go (home, faculty, parent's home, friend's home, ...) I attach it to any external monitor I can find.
If it matters my system is like this:
Archlinux
Linux 2.6.36
Xorg 7.6
X server 1.9.2
Intel Corporation Mobile 945GME Express Integrated Graphics Controller (fully accelerated by intel modules)
When I boot up the system, it uses the integrated monitor (LVDS1) only, and I have to manually manually switch to the external monitor (VGA1) using xrandr.
Is it possible to configure my Xorg (or whatever) so that it uses the VGA1 output if present?
View 1 Replies
View Related
Jan 13, 2010
My experience with external monitors in Linux is harrying at best. It's getting better, but it still ain't perfect. My current experience (I have an nVidia card, with nVidia drivers, on a Vostro laptop):
Turn on computer (booting Karmic).
Connect external monitor
Click on System->Preferences->Display
Redirect to nVidia's tool
Perform at least 8 more clicks to enable secondary monitor.
Realize resolution isn't optimal and set it with another few clicks.
Click Apply
Accept changes
Quit, then really quit, the app.
I always have to set the resolution, it doesn't detect it automatically. The main screen is *always* on the external monitor no matter my settings. I'm screwed if I unplug the monitor but forget to go through steps 1-8, this time disabling the external monitor. I have to replug it in, then turn it off, then I can unplug it. If I unplug the external monitor and plug in another one (going through steps 1-8 twice more) with different resolution capabilities (e.g. a projector), the settings get all messed up again.
Why can't adding an external monitor be automatic? It nearly is on OS X for instance. I plug it in, and it automatically detects the monitor and makes it a secondary monitor, or mirrors them, or turns it on and turns off the laptop screen. All the while being consistent about it. When I unplug the monitor, it knows instantly that I've done that, and reconfigures the laptop screen once again.
I imagine the answer is because no one has stepped up to do it yet, or it's in progress. So my question: what *is* the state of external monitor codes in Linux, and are there any plans to implement them in Lucid? Further, what would be a project, with *user friendly* context, to which I could tune in?
Or, am I not aware of the "right way" to do it?
I define user friendly as roughly the level of kernelnewbies.org . That is, kn.org is my gauge of what I can understand.
View 1 Replies
View Related
Apr 30, 2010
I am using a Asus UL30A laptop computer. I just performed an upgrade from 9.10 to 10.04. I remember running into this problem before, but I forgot how to fix it. The problem is, when I plug my laptop into the external monitor with my laptop screen turned off automatically when I first log in, I do not see the mouse cursor on the external monitor! The mouse cursor is still here, although invisible - if I do a right-click, the property menu will come up. My current workaround is simple- if I switch to the next workspace (by pressing Ctrl-Alt-right arrow), the cursor will appear from then on.
View 1 Replies
View Related
May 10, 2010
I run Ubuntu on a MacBook Pro with an external monitor connected. But currently the external monitor only works with one user account. The External gets no signal and the laptop display is used on the login page. Is there any way of having the login page and possibly startup displayed on the external at all times for all accounts.
System > preferences > Display Doesn't work for me, I use NVIDIA X Server Settings
View 1 Replies
View Related
Jul 26, 2010
I have a Hp dv5000 Laptop (not that it matters) with ATI 200M graphics chip and Ubuntu 10.04 LTS. Compiz works perfectly on my laptop screen. But when using my 23" Monitor it just doesn't. If I try enabling desktop effects it tells me it can't. Through terminal ( runnning 'compiz')I get the following error:
compiz (core) - Fatal: Root visual is not a GL visual
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :0.0
Launching fallback window manager
My /etc/X11/xorg.conf looks like this:
Section "Screen"
Identifier"Configured Screen Device"
Device"Configured Video Device"
SubSection "Display"
[code]....
View 2 Replies
View Related
Sep 22, 2010
I have an external monitor at work, but not at home. I take my laptop home and when I come back the settings are off. My monitor is above my laptop, so I have to rearrage displays and save every time its plugged in. Isn't there a system file or something somewhere that I can write to and save the current state as the default?
View 5 Replies
View Related
Jun 16, 2011
I just install Ubuntu OS 11.04 recently to my HP Mini 110 netbook. When I try to display on my external 20inch samsung monitor. I get the black borders as shown on the pic. Resolution of 1024 x 768 or higher will cause the problem whereas lower resolution will not have that black border.
View 2 Replies
View Related
Jun 24, 2011
I just upgraded my Ubuntu V10.4 LTS to Ubuntu 11. After that, I lost my external monitor and I cannot find those usual "preferences", "Administration" navigational menus on top of the screen.
Stumbled into Multiple Monitors under System, but it didn't detect the second monitor. However, the 2nd monitor was active and with system startup messages displayed there during reboot. But as soon as the desktop appear, that 2nd monitor lost its signal.
View 6 Replies
View Related
May 11, 2010
I'm running Ubuntu 10.04 LTS on a Macbook 3,1 late 2007. I have an HP paviilon f1703 external monitor that I would like to use as the main screen to load the full resolution GUI without using the laptop monitor at all. I've done several Google searches and tried several remedies, and I'm either doing them totally wrong (which is very very possible because I'm such a newb), their out of date, or their just not working for me.
View 2 Replies
View Related
Aug 8, 2011
Does anyone know what program I can use to set it up so when I plug in a VGA or HDMI monitor it automatically sets up video output?-P.S. -This is on a ArchLinux install with PekWM for the window manager
View 5 Replies
View Related
