Does anyone know what program I can use to set it up so when I plug in a VGA or HDMI monitor it automatically sets up video output?-P.S. -This is on a ArchLinux install with PekWM for the window manager
View 5 RepliesMy netbook DOES seem to know when I plug in or remove an external monitor. Can I get it to simply auto-switch?
View 4 Replies View RelatedMy laptop has a dual boot Debian + Ubuntu installation.
In particular I am using Debian 8.0 with stock kernel 3.16.0-4 (or equally 4.1.10 custom compiled, I tested it and it does not make any difference for the subject of this post).
Ubuntu is 14.10, with stock kernel 3.19.0-15.
In both installations I have nvidia nouveau drivers and intel integrated graphics drivers installed and loaded. This is the default for both installations.
In both installations I have xorg automatically configured (no xorg.conf file present in /etc/X11). In both systems the content of /usr/share/X11/xorg.conf.d is the same for what moitors are concerned (differences in mice and trackpad entries).
Unfortunately, the video configuration in Ubuntu 14.10 works out of the box. In particular I can plug in an external monitor/projector and it will fire-up the nvidia card (nouveau drivers) to power that monitor.
Debian 8.0 on the other hand does not even detect the external monitor.
I don't know where to start to solve the problems.
The hardware is as follows: the laptop (lenovo W530) features both an Intel integrated graphics card and an Nvidia K1000M. The VGA port is connected only to the Nvidia card (this is according to my online research, as I don't know how to check this).
I upgraded Ubuntu 9.04 to 9.10 desktop a few weeks ago and an external USB drive that was mounting at startup on 9.04 is no longer mounting on 9.10. If I unplug the USB cable and plug it back in it comes up. The issue is strange in that when a regular non-admin logs in the drive auto mounts but does not for an admin login. I have not been able to put together search results that would lead me to a hint of why this would occur and/or what aresolution may be.Why would the drive auto mount when a regular user logs in but not auto mount for an admin? When I say admin I guess what I mean is a user with more privileges such as member of the admin group.
View 2 Replies View RelatedI have configured mail server using Centos. I have also used procmail and used squirrel mail as webmail browser. I want to provide auto reply facility to my users? What should I do?
View 5 Replies View RelatedI am having problems getting my external monitor to work. When I plug in the monitor, both the laptop screen and the external monitor go black. When I unplug the monitor, the laptop screen works again.
When I startup with the external monitor plugged in, neither screen works or teh computer hangs or something.
I have had the external monitor going on a couple of occasions. I did manage to configure my monitors through System Settings > Display. I turned off the laptop monitor as I just want to use the external. But after rebooting, things didn't work.
I have a Thinkpad E420, Fedora 15
I have an external monitor connected to my laptop (extended display). I always drag the Totem player from the laptop screen to external monitor to watch video files. I wonder, if the Totem player can be set to open in the external monitor automatically, everytime I open it?
View 1 Replies View RelatedMy software and hardware information are as follows. I have Fedora 12 and KDE 4.4.5 installed on a Dell Vostro 1500 laptop. I believe it's a 64 bit processor; it's an Intel Core 2 Duo CPU. The external monitor is a Dell as well.
My problem is that my system does not seem to be detecting an external monitor that I have connected. Everything else is working just fine; however, I would like to have the option of attaching an external monitor. When I plug the external monitor into the laptop, the external monitor remains black and appears to be in power save mode. The results of xrandr -q (with or without the external monitor attached: it doesn't appear to change) are as follows.
Code:
How can I get my laptop to recognize that the external monitor is even connected? Let me know if I can be more specific or provide additional details.
I recently installed Debian, using the amd64 Network Install .iso. I'm using XFCE4 as my desktop environment, and everything is working well... on my laptop's screen.
My desired setup is to have my laptop sitting on a well-ventilated shelf, closed, and to have an external monitor be my main monitor. I want this because I'm using my laptop as my "home" computer, so it never moves, and I don't like the keyboard/trackpad. My laptop has a VGA output, and I can get my desired setup on my Windows partition (not stating a preference ; just that the hardware CAN do what I want it to).
I've been working my way around the Internet for a few days, now, and I've got the commercial NVIDIA driver installed. If I run sudo nvidia-config --twinview I can get my external monitor to be part of the display, which is great, but it's part of a dual-screen monitor setup, which is not what I want at all, because (a) XFCE's multiple virtual desktops are good enough for me and (b) my graphics card is integrated, and I'm trying to squeeze every drop of performance out of my laptop that I can (1 gig of RAM; the less that my graphics card eats into it, the better). Plus, it'd be annoying to accidentally drop something on my laptop's screen, and then have to dig it out of the shelf in order to undo it. I'm not saying that I'm consistently clumsy, but I'd eventually end up doing it.
I've got an eeePC with a really tiny monitor, so whenever I go (home, faculty, parent's home, friend's home, ...) I attach it to any external monitor I can find.
If it matters my system is like this:
Archlinux
Linux 2.6.36
Xorg 7.6
X server 1.9.2
Intel Corporation Mobile 945GME Express Integrated Graphics Controller (fully accelerated by intel modules)
When I boot up the system, it uses the integrated monitor (LVDS1) only, and I have to manually manually switch to the external monitor (VGA1) using xrandr.
Is it possible to configure my Xorg (or whatever) so that it uses the VGA1 output if present?
I have a Lenovo 3000 N100 laptop which LCD does not work anymore.So I borrowed a monitor from my friend and started using it(it has been few days).I had installed Fedora-12 few months ago. After connecting the external monitor, I found that this one shows good graphical start-up but just upto the login screen(just before the login screen, login-screen does not come) and it proceeds no more.Though I can get the virtual consoles restarting xserver is of no use.
View 5 Replies View RelatedA few days ago I installed browserlinux onto my AspireOne netbook whilst connected to a 15" external monitor of 1024x768 at 60Hz. During installation I ran the Puppy Xorg Wizard with the netbook's monitor (1024x600) switched off. It selected the optimum resolution of my external monitor correctly as 1024x768 and the 'intel' driver for the Intel 945 Express chipset. However when I ran programs and maximised their windows they would cut off about a third from the bottom. I ran the Xorg Resolution Wizard which showed a resolution of 1024x600 despite xorg.conf only showing an option of 1024x768. I tried to copy a xorg.conf from Linpus (Fedora 8) which had required some altering in the past to run the external monitor at the correct resolution but X failed to start (possibly because Xorg in browserlinux is a newer release). Would it be possible for someone to upload a xorg.conf file which would enable display the external monitor at the correct resolution (and ideally allow switching between the two monitors - under Linpus the hotkey is Fn + 4) or suggest alterations to the current file?
[Code]...
I'm using Xorg 7.5 on a Radeon HD4870 with the FOSS radeonhd server on my HP 6830s. The laptop has a VGA connector and I attach it to a 37" panasonic plasma TV. It works fine except for a little annoyance: when activated, the TV screen is set to the resolution of 1360x768 (which it reports as being the highest it supports) but all the image is shifted by about 100 pixels to the right. I can't see the leftmost part of the page, and I have a black vertical bar to the right.
If I change the resolution to 1024x768 there is no shifting, the image fills the entire screen with no parts hidden, but at this resolution the image is stretched. How can I tune the position on the external monitor so that the image is centered in the screen filling it entirely?
How can I detect when an external monitor is connected in linux? I need to run various scripts to set up my workspace. Is there some clever way to kick off a script when the monitor state has changed? I'm using the Nvidia display driver.
View 3 Replies View RelatedThis is a triple-monitor setup with two video cards, where the mouse pointer gets "stuck" if it tries to cross from one video card to the next one. It worked correctly in openSUSE 11.2 and doesn't work in openSUSE 11.3 with the same xorg.conf. This is a 64-bit openSUSE 11.3 with xorg 7.5-11.3 (the openSUSE prepackaged version). I've already tried NVidia drivers 256.53-16.1 (the openSUSE NVidia repository version) and 260.19.12 (the latest off of the NVidia website).
This is the same xorg.conf that I used successfully in openSUSE 11.2. I tried a new automatically generated xorg.conf using nvidia-settings and it had the same problem. This forum won't let me upload the relevant files, but here: [URL] is a tar-ball with my xorg.conf, Xorg.*.log, /var/log/messages, and the NVidia debugging output.
I have an Acer Aspire One AO150 and am having trouble plugging in an external monitor under Ubuntu 9.10. There were no problems under 9.04. If I plug in an external monitor once the machine is already up, then bring up the 'display' application to activate it, it basically hangs. There are no problem under these circumstances if I have desktop effects turned off.
A few more details after a question below. The machine does not respond to its keyboard commands to switch to an external monitor, nor does it respond to Ctrl-Alt-F1, etc to switch out of X. The pointer is visible on the monitors (at the edge of each) and is frozen as a 'busy' cursor, but with no animation. The kernel does respond to SysReq commands (REISUB).
In the latest attempt I had the external monitor active earlier, then removed it and activated desktop effects. Upon plugging in the eternal monitor then bringing up the display application, it hangs.
I connected an external 22" monitor to my new linux netbook and now I am trying to improve the display clarity. By shifting the "clock" monitor bar to 100 ,the letters were less faded but edges of my screen were lost (by zooming in). Can I fix that through Linux?
View 3 Replies View RelatedI have an HP Pavilion dv9000 which I would like to use completely with any Linux OS. I have tried to install Linux Ubuntu 10.04.1 but it appears that it doesn't recognize the external monitor and ends the installation. I have a clean hard drive that I could install but I do not know which of the two drives I should replace. I can only get into windows in safe mode and I would think this may have something to do with the problem, don't no.
View 2 Replies View RelatedI've got a laptop running Backtrack4 and an external tv/monitor. Is there a program/command/configuration file that I can use to allow my laptop and monitor to connect with one another via HDMI?
View 1 Replies View Relatedi have done most of the setup for MRTG network monitor tool.
But i m stuck at configuration part.
the actual MRTG guide says following.
I m little confused about what should i put inplace of community@router.abc.xyz.
Quote:
The next step is to configure mrtg for monitoring a network device. This is done by creating an mrtg.cfg file which defines what you want to monitor. Luckily, you don't have to dive straight in and start writing your own configuration file all by yourself. Together with mrtg you also got a copy of cfgmaker. This is a script you can point at a router of your choice; it will create a mrtg configuration file for you. You can find the script in the bin subdirectory.
cfgmaker --global 'WorkDir: /home/httpd/mrtg'
--global 'Options[_]: bits,growright'
--output /home/mrtg/cfg/mrtg.cfg
community@router.abc.xyz
This example above will create an mrtg config file in /home/mrtg/cfg assuming this is a directory visible on your webserver. You can read all about cfgmaker in cfgmaker. One area you might want to look at is the possibility of using --ifref=ip to prevent interface renumbering troubles from catching you.
If you want to start rolling your own mrtg configuration files, make sure you read mrtg-reference to learn all about the possible configuration options.
I've been trying to get it to work on my laptop off and on for several years now, experimenting first with Redhat (version 6.1, I think) and now trying with Ubuntu 9.04. I've done a full install using the entire hard drive (no dual boot). So I'm trying it for real this time. I'm having a problem with my video drivers. The video is ok (not great) and I don't seem to have any options to adjust it.
When I go into system > preferences > display, I see monitor "unknown", set at 1024x768 with a 75 Hz refresh. If I click on "detect monitors" nothing happens. It says under system > administration > hardware drivers that "no proprietary drivers are in use on this system". I've got two options:
[code]...
For the first part of boot, I have access, but then when it comes up into Ubuntu, the big monitor (a Dell 2500, I think, plugged into the stock Toshiba docking station via DVI) quits working, and all I have is a dim picture (dark, like something's sapping power from it) on the laptop display.....
This is my third SLackware install. I installed 10,12, now 13. the Xorgsetup has changed I think, it does not display the screen to choose Horizontal and Vertical settings for the monitor. In addition, how can I set the Refresh rate?
View 2 Replies View RelatedI'm running Fedora 11 GNOME as a server and I do not want to attach a keyboard, mouse or monitor. I will be shutting down the server at night to save electricity. But, I noticed that when I start up the system the next morning, the auto-login won't work until a monitor is attached. how to get the server to automatically log itself in without monitor attachment? I'm going to use the server to access my fileS remotely through Samba (which I can still do). But, I also want to have VNC functionality so I can remote desktop in to the system at will. I can access my files ok through Samba without the computer logging itself in, but I can't remote desktop in with VNC.
View 1 Replies View RelatedI bought a new external HDD - a Seagate 2 TB (actually 1.8 TB) but am unable to mount it. The drive is USB 3.0 while the ports on my system are USB 2.0 but that is NOT the issue. I am able to see the HDD without an issue on the CLI. I am on Jessie 64-bit.
Code: Select all$ lsusb
Bus 005 Device 003: ID 0bc2:ab24 Seagate RSS LLC
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]....
My question is why it does not automount. Also if I should try to manually mount it, how should I go about it ?
I got the disks pre-formatted in around 500 GB (or as close to it) multiples as can be seen.
The other question is why does /dev/sdb4 show some different dialog than the rest ?
I have a problem that i have tried to solve for a couple of days.server with some internal disks. Those disks are for the core-system and some file server related stuff.Beside the server i got two external LaCie boxes that contains 4x1tb disks each. The disks inside the boxes are RAID5, so the system sees every box as one whole "disk".Now to the problem. I just can�t get those "two" RAID cofigurations two be auto mounted at boot. I have tried to put them in /etc/fstab with a whole bunch of different options but nothing works. The system sees them but don't auto mount them, and i can manually mount them without any problem at all. I have tried to "google" the problem but can't find any similar
View 4 Replies View RelatedHave a 1TB external USB hard drive I want to use on both Windows and Linux (Mythbuntu 9.10), so I thought the easiest way would be to format it with NTFS. Installed the NTFS-3G package and I'm able to read and write to the drive fine from Linux, however I have a few questions;
1) How do I configure Linux so that when it mounts the NTFS partition it is writeable for user, group and other (bascially I want everyone to have read and write access)? Currently when the NTFS disk is mounted the permissions are restricted to the user only and I suspect I'll need to edit fstab for this, but don't have much experience here so need help with the specifics.
2) If my Linux PC is turned on with the external drive attached, the disk is not mounted until I double click on the icon on the desktop. Is there anyway I can configure Linux so that it will automatically mount the external disk when booting?
Below is what is in my fstab file at present;
Quote:
# /etc/fstab: static file system information.
#
# -- This file has been automaticly generated by ntfs-config --
#
# <file system> <mount point> <type> <options> <dump> <pass>
[Code]....
The solution may to my problem may exist elsewhere, but I had trouble searching/finding it.I just bought a new external drive. The drive is formatted as ext4. I use it mainly in esata mode. Whenever I connect it, it mounts to /media/[UUID], where "[UUID]" is the UUID of the drive. I want it to be located at /media/backup when it is inserted, not in relation the UUID. I have tried putting a new line in my fstab (mount by UUID to folder) to mount the drive. It mounts correctly if the drive is connected to the computer and turned on during startup, but if the drive is off/not connected during startup Ubuntu barks at me. (I press 's' to skip mounting the drive) Is there a way to make external/removable drives mount to a certain location other than /media/[UUID] when they are inserted? I want the drive to mount to the folder while the computer is running, not only during startup.
View 3 Replies View RelatedI've just installed Ubuntu on my laptop. My laptop has an nVidia card so I'm forced to use the nVidia configuration tools. What I'd like to happen is for it to automatically start using my monitors if they're detected. OR, make a simple script that will enable the monitors without needing to restart X.
View 1 Replies View RelatedI have successfully mounted my Win7 volume and my external hard drives NTFS volume as well. However, after modifying the fstab I seem to only be getting the win7 volume to auto-mount. Below is the contents of my fstab. /dev/sdf3 is not mounting. Again, it works no problem if I manually mount it.
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
[code]....
Just installed Slackware 13 this morning. It's been a long time since I last tried Linux, but Slack works (a lot easier than Slack 8 did back when I last used it!) quite well. I'm using the XFCE desktop and it's smooth as silk except for one odd problem-I cannot get any of my USB drives to mount. I just plugged in my Lexar 4GB USB flash drive and received an error message. Here's from /var/log/messages from when I initally plugged in the drive (I have a 500GB WD MyBook USB external drive that is always plugged in):
Any ideas or suggestions of what to look at? I'm not familiar with HAL in Linux although I've seen plenty of discussion about it and have an idea of what it's supposed to (or break! ).