Problem with megaraid controller and Dell2850, all that I can see on this screenshot: [URL]. All drives successfully passed verifying from LSI controllers (Ctrl+A at startup), also I tried to boot from rescue live cd and mount all the mirrored drives and check it by fsck - ok.
View 1 Repliesmegaraid controller and Dell2850, all that I can see on thi screenshot:
[URL]
All drives successfuly passed verifing from LSI controllers (Ctrl+A at startup), also I tried to boot from rescue llive cd and mount all the morrored drives and check it by fsck - ok.
i need to configure Redhat Linux as Domain Controller in my organisation, whee all of my clients PC's will be Windows XP or Windows 7 ( where i can login through Domain users ). what exactly i need to configure in Redhat Linux, i heard Configuring Samba as PDC is quite enough ? is that right ? then what is Open LDAP ? should i need to Configure Open LDAP also ?
View 2 Replies View RelatedI can not get the node or cloud controllers to startup using the init.d scripts. I have a fresh install of CentOS 5.4 with Eucalyptus 1.6.2 I have compiled Eucalyptus and all packages using the RPM supplied from Eucalyptus and utilizing yum installer. I do not currently have any processes or applications listening currently on the ports on the boxes as well. I think it may be a permissions issue or something because I get a "permission denied error", but I am not sure if it is Eucalyptus or CentOS. It looks as if it is not binding to the address on the interface of the NIC. It may be something else however. I have the Node controller, Cloud controller, and Cluster controller on seperate physical boxes. When I try to run either the cloud controller or the node controller I get this message:
Cloud Controller:
[root@cluster-cont ~]# /etc/init.d/eucalyptus-cc start
Starting Eucalyptus cluster controller: (13)Permission denied: make_sock: could not bind to address [::]:8774
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:8774
[code]...
Basically i want it so that the analogue stick on my PS2 controller, which connects via a USB adaptor and is recognized, correctly controls in game characters. It seems to work fine enough in platformers, at least it does with Banjo Kazooie, but with games like perfect Dark it seem to be trying to move forward and look down at the same time, also backward and look up simultaneously and look sideways and move sideways simultaneously , rendering the game all but unplayable.
I have tried running jscal and, apart from the fact that it seems a bit beyond me, it reports "jscal: missing devicename" when i try to run "jscal -c". Do others out there have there analogue sticks working correctly with games like Perfect Dark, or the James Bond games, for example?
I am installing openSUSE 11.4 on a Supermicro Quad core board with a pci-e LSI megaraid card and the installation goes through fine but once the pc reboots and boot off the hard drive a boot error occurs now i installed openSUSE 11.2 and all is well. What is wrong in 11.4.
View 3 Replies View RelatedEver since Linux kernels beyond 2.6.24.3, I've been unable to boot my HP Netserver LH3. It gives a kernel panic with a variety of messages that always include
"common_interrupt+0x38/0x39"
I tried everything from updating the BIOS and firmware, to myriads of differing kernel configurations (at 4 hours per compile, imagine the agony).
I also tried booting with every combination of the kernel boot parameters acpi=off, noapic, nolapic, irqpoll, etc., that I could imagine. No dice. In final desperation, I began unplugging PCI cards one by one before finally disconnecting the SDLT drive from the Netraid SCSI. It seems that in later kernels or versions of udev, sharing the SCSI bus with the LH3 drives causes conflicts. I have an additional AHA SCSI card in the machine, so will try connecting the SDLT to that and see how it goes.
How to install OpenSUSE at IBM X3400. Or How to make driver for
LSI Megaraid SAS
ServerRAID M1015 SAS/SATA Controller
I have looked thru the forums and I am not sure if LSI 8204ELP definitely works with Centos 5.3 or 5.2 or 5.1 or not. Can anyone who has had a positive experience with this hardware combination give some feedback etc. mobo is supermicro c2sbx [URL]
View 2 Replies View RelatedI have Ubuntu 10.04 and MegaRAID controller. The only tool I have is the notorious MegaCli. I need to be emailed when some disk has failed in the RAID array. How to set that up?
View 3 Replies View RelatedI have mounted a server with 4 hdd sata raid 5 with adapter LSI Megaraid SAS/SATA 8204ELP but centos dont detects raid. Can you recommend me a adapter 100% compatible with centos 5 with these requirements:
View 2 Replies View RelatedHow to load the driver for this SAS+SATA controller during install, I tried loading the supplied 5.0.5 driver from LSI but it appears that the options in the provided list do not provide actual support for the 5.0.7 release. Anyone having luck with the 9280 controller. I checked kernel.org and saw that supports is getting added for the upstream release of the kernel but wonder if anyone was able to workout a patch for the present Debian kernel in order to install the driver as the OS loads.
View 1 Replies View RelatedAt the school i work in i have a server2k3 server that provides a domain to all the windows clients, aswell as a fedora server that acts as an imaging machine and webserver.
Im rather concious of the fact that if for any reason the Server2k3 server was to die there is no backup of active directory, or anything that can take its place whilst a replacement is found.
So is it possible to use a fedora machine with samba as a secondary domain controller? so it can be used as a login server, and has a copy of AD.
I had Windows XP working. I then put in a new hard disk and installed Redhat 5 on it. rom then i could only boot into Redhat. Further, everyting is very slow. Anothe rproblem is that Redhat does not see my netwrok so I cannot get onto the Internet. I need to have the choice of booting into XP or Redhat.
View 2 Replies View RelatedI cant mount a directory on red hat 5 from red hat 4 using fstab.I keep getting permission denied.I mount directories on the same red hat 5 sys from other red hat 5 and 2 old HPUX systems using fstab.When I try to telnet to it i get "no route to host."
View 3 Replies View RelatedHow do I get it work with the triggers and analogue sticks? Also, when I try to use it with zsnes and set the controls, it automatically records R2 (J19) being pressed when it's not
View 1 Replies View RelatedI'm trying to find a reasonably priced PCI to IDE controller that will work under Karmic. I have just built up a new PC which has SATA HDDs and want to put my old IDE drives in it. It has only one IDE interface on the mobo which I've got my DVD/CD drive on.
My research so far has found users have tried in the past with varying success.
I have a PS3 Sixaxis controller, and a USB cord. I downlod "QtSixA" properly, and in the GUI, a controller is recognized as a USB controller.However, when I open up emulators, or games, I'm unable to map controls to the PS3 controller, or anything. What am I doing wrong?
View 5 Replies View RelatedCan I use my PS3 controller to run Nestopia? And if so, what is the most efficient way to set up Nestopia and the controller?
View 2 Replies View RelatedI've bought a small embedded controller running with a minimized Lenny for armel. Minimized in a way that there is even no apt-get or dpkg installed on it, due to keep the memory footprint as small as possible.Is there a way to keep a "shadow" system in a directory on my Laptop (e.g. ~/armel), maintained with dependencies by a package manager like apt-get? This would allow to install addition packages including all dependent with a simple apt-get call.Of course, later I have to put the whole tree from my Laptop towards my embedded controller. I've already tried the following:Setup a directory tree behind ~/armel for apt by a copy from my laptops Lenny
"sudo apt-get -o DIR=~/armel -o APT::Architecture=armel update"
to get the repositories, this works fine
"sudo apt-get -o DIR=~/armel -o APT::Architecture=armel -d -f install"
to download the full list of .deb packages, this works fine
[code]...
I want to add a new IDE controller, to the one I already have on board (I have only one). I disable the on board controller in order to boot the same disk using the new IDE controller.
The problem is that when I get to Grub it does not know where to boot from.
The system should boot from hd0,0 but it can't find it. I tried hd1, hd2 and hd3. None of them worked.
Do I need to edit Grub before installing the extra IDE controller?
It is possible to use the sixaxis as a joystick. But how?
For a year and a half I've been trying to get sixaxis working on ubuntu, and there appear to be even less options on debian.
While this page suggests there is kernel support, usbmon doesn't show any packages coming down the line at all (But lsusb does recognize the device)
So how do I get debian to recognize the sixaxis?
Recently we bought a server machine in purpose of hosting game servers.Debian is the optimal choice for us but we have a huge problem.We have 2 x HDD Fujitsu MBA3300RC, 300GB, 15000rpm, 16MB [MBA3300RC] , but NO SAS-controller , so standard Debian DVD1 didn't recognized our HDD's during installation.Is there any way to install Debian on our machine without haveing to buy a SAS-controller? answer in "step-by-step" method, i am not very experimentated in linux.
View 2 Replies View RelatedI bought a PCIE USB 3.0 controller card for my computer and now I'm trying to get it to work. I read that there's an issue with standby mode and for that reason it has been disabled in F14. [URL] I also read the instructions on how to activate it and tried adding xhci.enable=1 or xhci_hcd.enable=1 to the kernel line in grub, but none of it worked. The controller chip is a "NEC Corporation uPD720200 USB 3.0 Host Controller" and I also tried it with a Fedora 12 Live CD where it worked pretty well. when this bug will be fixed and it will be activated by default?
View 6 Replies View RelatedI am attempting to upgrade my system to remove the two aging IDE drives and replace them with four SATA drives. I already have one SATA drive, which means I need a total of 5 SATA ports. My motherboard has two, while I had an existing PCI controller card (Promise TX2-Plus) with two ports. I purchased another card that uses the Sil3112 chip with two ports of its own.I have been running with the one Promise card with no problems for quite some time; lspci output is
Code:
sarmitage@ophelia:~$ lspci
00:00.0 Host bridge: nVidia Corporation nForce2 IGP2 (rev c1)
00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)[code]....
how I can get these two cards working together?
Anyone know how to do that? btw when i execute xinput list it doesn't show my connected controller.
View 2 Replies View RelatedDoes Debian have any particular tools or nuances for installing new hardware? I saw some stuff on Ubuntu which is related... but you know.
The dmesg file shows that it's being recognized, but I don't think it's actually being used (i.e. there is no driver installed). This is what's in the dmesg file:
Code:
[ 1.384634] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.855496] SCSI subsystem initialized
[ 5.146598] scsi0 : ioc0: LSI53C1020A A1, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=16
[Code]....
Unless someone has already compiled a driver for Debian Lenny for this hardware, I'm going to have to compile my own I guess. The driver package seems to come with something called mptlinux-4.00.43.00-src.tar.gz which I'm guessing can be compiled for any Linux, but looking at the instructions, it's pretty much beyond me how to get started. It talks about using kernel source to build a module and such and such.
Is there any linux command to find out the BMC Controller's mac address? The tools like ipmitool provide ways to configure IP to the lan of BMC controller, but our goal is to find out the MAC address automatically using some commands/tools.
View 1 Replies View RelatedI have a ps3 controller that i would like to use with the emulator software that i have found for linux. i hear that game pads have worked in linux before but i found nothing that explains on how to do this. i don't want to use it wirelessly though i want to use it via usb.
View 4 Replies View RelatedI have up to 300 PC in Ministry of Higher Education, I want to use UBUNUT server and UBUNUT Desktop for my network, But I am really not so familiar with UBUNUT Server just a little bit, finally here is my questions: Can I do these roles 1- Domain Controller. 2- User Accounts. 3- File Sharing. 4- Web Server. 5- Print Server. 6- Internet Sharing. 7- Web Chaching. 8- web proxy. 9- Firewall.
View 2 Replies View Related