I had Windows XP working. I then put in a new hard disk and installed Redhat 5 on it. rom then i could only boot into Redhat. Further, everyting is very slow. Anothe rproblem is that Redhat does not see my netwrok so I cannot get onto the Internet. I need to have the choice of booting into XP or Redhat.
View 2 RepliesI have currently Windows 7 running and installed on partition C.I have partition D empty , and I would like to install Red Hat on it without affecting Windows seven ( i.e., dual boot Windows 7 & Red Hat6 ).
View 2 Replies View RelatedI have red hat linux installed then I want to install win XP in dual boot.
View 2 Replies View RelatedI cant mount a directory on red hat 5 from red hat 4 using fstab.I keep getting permission denied.I mount directories on the same red hat 5 sys from other red hat 5 and 2 old HPUX systems using fstab.When I try to telnet to it i get "no route to host."
View 3 Replies View RelatedI put dual OS in my desktop. One is XP, and another one is RedHat EL5. when i installed EL5 in my system, the XP content and my personal files gone. XP is in D drive and EL5 in E drive. My personal files are in C & F drive. Now I would like to recover C & F drive files.
View 1 Replies View Relatedhow to change the screen from windows to linux very easily just like in windows (whenever u press alt+tab to switch between two or more windows).
View 8 Replies View Relatedso i m not able to install wine software in redhatas i m newbie to linux i dont know how to run windows applications in redhat
View 6 Replies View Relatedhow to add redhat linux5 client to windows domain
View 1 Replies View RelatedI just made my first RedHat Enterprise v5 installation, the thing is that i have on my network a windows server that i use for storage, i want to be able to share files between the windows server and the RH server, i already edit the smb.conf file and put my workgroup name, but i still cant see my the windows server. When o try to connect using the connect to server option it says, "could not open the location 'smb://server_ip_address/' Unknown error code: 46", i can ping the windows server
View 5 Replies View RelatedI would like to know if it is possible to push or pull all Windows printers (about 1000) to Redhat Advanced Server? I know normally Samba comes into play, but there i can only make connection to 1 printer at the time. Also, I must then add the printers from the Windows Print Cluster by hand. Considering the huge amount of work AND the manageable aspects ( you will then have the printers on two servers), this is not an option.
So, can I connect from the RedHat server directly to the Windows Print cluster, or, if not, at least load all printers in the CUPS configuration at once? Then I have at least connection. It's a Windows 2003 R2 print cluster with RedHat 5.3 Advanced Server. Eventually the RedHat environment will be a cluster.
Recently I installed RedHat Enterprise 5 on a windows machine. The machine is configured to use DHCP, but I have been seeing some strange behavior if I do nslookup on the machine's IP:
[someuser@lin01 mydir]$ nslookup 10.5.x.x
Server: 10.10.x.xx
Address: 10.10.x.xx#53
x.x.5.10.in-addr.arpa name = xyz.something.
x.x.5.10.in-addr.arpa name = lenovo-d1690047.
x.x.5.10.in-addr.arpa name = pqdlds.
x.x.5.10.in-addr.arpa name = lin01.mydomain.com.
Where only the last entry of [URL] is actually correct, how can remove the other entries? I spoke to my IT Manager and he cannot see these stale entries in the DNS (we are using windows AD)
Actually i've packages to show my ntfs partitions on my red hat linux but i 'm unable to install these packages. how can i install the packages
View 2 Replies View RelatedI configured my dns server running on redhat5(test.com, ip-192.168.10.1), all is working perfect on the server its-self and on the client machine(xp), it cant resolve the name [url] but can resolve when i use [url]are ok, nslookup displays the following error:
The reverse is working fine from the redhat machine, NO firewall on the client xp machine xp as host name is added in /etc/hosts
i need to configure Redhat Linux as Domain Controller in my organisation, whee all of my clients PC's will be Windows XP or Windows 7 ( where i can login through Domain users ). what exactly i need to configure in Redhat Linux, i heard Configuring Samba as PDC is quite enough ? is that right ? then what is Open LDAP ? should i need to Configure Open LDAP also ?
View 2 Replies View RelatedI use Redhat 2 server, the server suddenly can't boot now , it goes to the grub> mode, it can't boot to Redhat kernel
View 5 Replies View RelatedI have a redhat 4 on a Hp Proliant server. I did a restart of the server. Now it is not getting to the grub menu. It shows:
Attempting boot from hard drive (C
GRUB GRUB
and it hang there.
I know it has something to do with some controller stuff and I could not figure it out. It used to be working till I reboot.
Does redhat 5.4 x_86 support bootp? I am trying to boot the storix backup bootmedia through network.They say that I can use bootp instead of DHCP.We dont have DHCP server in our environment. I could not find the bootp package. find the bootp package for redhat 5.4 x_86
View 1 Replies View RelatedI'm trying to rsync files and directories from a RedHat linux host(v 4.5 & 4.7) to a Windows server 2003R2 Standard Edition with cygwin running. I'm executing the rsync command from the cygwin shell. The transfer involves rsync'ing approximately 1 TB of data from the linux server to the windows server. After about 280+GB of data transfer, the transfer just dies.
There seems to be no particular file or directory that the transfer stops at. I'm able to rsync GB's of data from other linux hosts to this cygwin server with no problem. Files and directories rsync fine.The network infrastructure is essentially the same regardless of the server being rsync'ed in that it is GB Ethernet running through Cisco GB switches. There appear to be no glitches or hiccups across the network path.
I've asked the folks at rsync.samba.org if they know of any problems or issues. Their response has been neutral in that if the version of rsync that cygwin has ported is within standards then there is no rsync reason this problem should happen.I've asked the cygwin support site if they know of any issues and they have yet to reply. So, my question is whether the version of rsync that is ported to cygwin is standard. If so, is there any reason cygwin & rsync keep failing like this?
I've asked the local rsync on linux guru's and they can't see any reason this should fail from a linux perspective. Apparently I am our company cygwin knowledge base by default.
I'm trying to setup a test LDAP server (redhat directory server) using centos. As per the redhat administration guide it states that the Directory Server Console is supported on several different platforms such as Windows XP, server 2003 and 2008. But I can't find the windows installer anywhere.
Is the installer a closed program and not freely distributed? I tried searching on google and I've seen other topics asking for it but ended without an answer. The reason why I need this is because the ldap server I'm setting up does not have a gui installed. I would like to be able to manage and configure it remotely on a windows machine if possible.
Added Note: I could probably install the console on another linux system with a gui and administer from there but I hope there is a much easier way using windows.
I have just installed Karmic on a dual boot system with XP and Ubuntu on separate drives.This set up worked ok with Jaunty. When the boot menu comes up, selecting Linux results in a successful boot. Selecting "Windows XP home edition (on /dev/sda1)" results in the screen changing to blank with the word "Grub" in the top left corner and no further progress.No error codes associated with this message. I've tried suggestions I've seen in various threads but have had no success.
Below is the contents of menu.lst:
# menu.lst - See: grub(, info grub, update-grub(
# grub-install(, grub-floppy(,
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
[Code]...
I have Fedora 13 and XP installed on my laptop. Right now it only boots to XP but I have a Fedora Live CD so is there some way I can use the live cd to boot into Fedora and edit or install grub to show up at boot?
View 1 Replies View Relatedi have problem to acces red hat ..when i write the username and password, appear the pasword or username are not correct..but before this it is ok..i use same pasword and username..i dont know why when i try to log in , i get that error..how to solve this problem because i need to acces to process some data for my study..how to reset or to check what the probelm??
View 3 Replies View RelatedHow do I configure boot so that the computer boots straight into windows xp, unless I press a key during boot?
View 5 Replies View Relatedgot myself a new pc, windows 7 installed.. i just got done installing ubuntu10.10. it said to finnish, i had to reboot.. ok, no problem.. i reboot, loading says uuid is not valid.. but, it loads 7 fine.. they are on the same drive, but different partitions. i only got a wireless usb keyboard and when it goes to the shell, it doesnt seen to recognize it.
View 9 Replies View RelatedFirst, let me start off by saying that for the past 5-6 months I've been using Linux stand-alone without Windows at all. Recently though, I got netflix and found that there is no support for Linux distros. So, begrudgingly, I installed a small Windows Partition on my computer. So here's the problem: I can't boot back into Ubuntu. Whenever I turn on my computer, it automatically boots up into Windows 7. I know my Ubuntu partition is still there, because when I boot from my live disc I can see it. Is there a way I can fix this using Windows and/or a live disc?
View 5 Replies View RelatedI have windows7 installed in my laptop. I tried installing Redhat linux in it, and I was successful. But then I logged in with windows7 and deleted the partition in which I had installed redhat through computer management. Now my system doesnt boot with windows instead it boots with GRUB. Also to inform that the deleted linux partition I merged with Windows.
View 2 Replies View RelatedI have been searching Google and yahoo but no luck.
Well the question is, questions are rather....
What is syslevel in redhat 5?
I have 64 bit Redhat 6 installed. Need to use ModJK for Apache and Tomcat Installed jdk1.6.0_23 in /usr/java. From Oracles site downloaded jdk-6u23-linux-x64-rpm.bin. One of the instructions is to insert this in the /etc/httpd/conf/workers.properties file:
# Unix - Sun VM or blackdown
worker.inprocess.jvm_lib=$(workers.java_home)$(ps)jre$(ps)lib$(ps)i386$(ps)server$(ps)libjvm.so
I only have the libjvm.so in:
/usr/java/jdk1.6.0_23/jre/lib/amd64 ??????? I have a x86_64 Xeon.
Is this the correct file for Redhat 6 64 bit? Should I ask Oracle instead?
Dear Linux users. I am trying to install torque-3.0.0 in Redhat Enterprise Linux 5.5 But when I try to configure using the command ./configure --with-tclx --enable-gui I have been getting the following error.
checking for Tcl configuration... none configure: Tcl support disabled configure: Tk support disabled
checking whether to include the GUI-clients... configure: error: cannot build GUI without Tk library
I just upgraded on system from RedHat 4.0 to 4.8 and I'm having issues recognizing flash drives on the system. After a little bit of googling and attempting what some people recommend I am still having issues. I've tried the lsusb command but it doesn't seem to be recognized. I've searched the media and dev directories but found nothing showing any system recognition of USB devices. The ports do work as I've hopped the mouse and keyboard around to all of them and they work just fine.
View 5 Replies View Related