I am installing openSUSE 11.4 on a Supermicro Quad core board with a pci-e LSI megaraid card and the installation goes through fine but once the pc reboots and boot off the hard drive a boot error occurs now i installed openSUSE 11.2 and all is well. What is wrong in 11.4.
View 3 Replies
How to install OpenSUSE at IBM X3400. Or How to make driver for
LSI Megaraid SAS
ServerRAID M1015 SAS/SATA Controller
Ever since Linux kernels beyond 2.6.24.3, I've been unable to boot my HP Netserver LH3. It gives a kernel panic with a variety of messages that always include
"common_interrupt+0x38/0x39"
I tried everything from updating the BIOS and firmware, to myriads of differing kernel configurations (at 4 hours per compile, imagine the agony).
I also tried booting with every combination of the kernel boot parameters acpi=off, noapic, nolapic, irqpoll, etc., that I could imagine. No dice. In final desperation, I began unplugging PCI cards one by one before finally disconnecting the SDLT drive from the Netraid SCSI. It seems that in later kernels or versions of udev, sharing the SCSI bus with the LH3 drives causes conflicts. I have an additional AHA SCSI card in the machine, so will try connecting the SDLT to that and see how it goes.
Problem with megaraid controller and Dell2850, all that I can see on this screenshot: [URL]. All drives successfully passed verifying from LSI controllers (Ctrl+A at startup), also I tried to boot from rescue live cd and mount all the mirrored drives and check it by fsck - ok.
View 1 Replies View RelatedI have looked thru the forums and I am not sure if LSI 8204ELP definitely works with Centos 5.3 or 5.2 or 5.1 or not. Can anyone who has had a positive experience with this hardware combination give some feedback etc. mobo is supermicro c2sbx [URL]
View 2 Replies View RelatedI have Ubuntu 10.04 and MegaRAID controller. The only tool I have is the notorious MegaCli. I need to be emailed when some disk has failed in the RAID array. How to set that up?
View 3 Replies View RelatedI have mounted a server with 4 hdd sata raid 5 with adapter LSI Megaraid SAS/SATA 8204ELP but centos dont detects raid. Can you recommend me a adapter 100% compatible with centos 5 with these requirements:
View 2 Replies View RelatedHow to load the driver for this SAS+SATA controller during install, I tried loading the supplied 5.0.5 driver from LSI but it appears that the options in the provided list do not provide actual support for the 5.0.7 release. Anyone having luck with the 9280 controller. I checked kernel.org and saw that supports is getting added for the upstream release of the kernel but wonder if anyone was able to workout a patch for the present Debian kernel in order to install the driver as the OS loads.
View 1 Replies View Relatedmegaraid controller and Dell2850, all that I can see on thi screenshot:
[URL]
All drives successfuly passed verifing from LSI controllers (Ctrl+A at startup), also I tried to boot from rescue llive cd and mount all the morrored drives and check it by fsck - ok.
How can I install Mplayer for openSUSE 11.3 x86_64 The 1 click install from packman is not working and the download install is asking for libopencore-amrnb.so.0 but llibopencore-amrnb0(x86-64) = 0.1.2-1.pm.3.1 is installed
View 9 Replies View RelatedI have a dell E6400, which I picked up recently 2nd hand. Previous owners had Win 7 evaluation version on it, which had expired. Originally the machine had Vista Business on it and Lic Key intact. I installed Opensuse on without problems whilst waiting for the original Vista disc to make it's way to me - forgot to pick it up with the machine.
I now want to get rid of the expired Win 7 and re-install Vista, but the grub is only giving me the option of Windows, Opensuse, Opensuse Safe and Floppy. My machine only has a cd/dvd drive and when I've selected this the dvd has started, but then it looks like it defaults back to Opensuse which goes so far then freezes. No obvious way for me to reinstall vista. This may of course be a completely daft question to ask, but I've looked at this for an hour or so and can't figure it out...?
I'm not sure if this is an OS issue but openSUSE wont boot with two different ram speeds. I've got two 1gb 667Mhz RAM and tried one of 800Mhz. So the idea was to get 3gb (1gb 667Mhz + 2gb 800Mhz).After GRUB starts nothing happens (at least on screen).By the way I also tried the 800Mhz RAM alone and it worked so it's ok.Why openSUSE (11.3) can't boot with these two different RAM memories?
View 8 Replies View RelatedI'm using OpenSuse 11.3 Gnome I'm having trouble installing new packages from the One Click Installs of Software Open Suse and from Packman. I get the following error each time.The install link or file you opened does not contain instructions for this version of openSUSE.
Having done a new install of Open Suse 11.3 I'm trying to get back to using Mplayer and Cairo-dock, just to mention two packages. Is the version 11.3 still too new, or is there a fault in the auto installs of 11.3? I have managed to download the rpm of Cairo-dock but the Cairo-dock-plugins have dependency problems which I presume should be resolved using the One Click Install - when it works.
i cant seem to get my internet working when i set a static ip address in my suse box.how should i get that to work?
View 3 Replies View RelatedOn my desktop PC I have openSUSE 11.2 installed but this os as screwed up. For example: the mouse's left button not reacting at all not in GNOME nor KDE. So I fought to upgrade to 11.3 but my question is how can I do it without losing my data and settings. I have there a TexLive working environment and I don't sure I will able to do it again on new installation.
View 6 Replies View RelatedI have a newly installed openSUSE 11.4 (several reinstalls actually) which will not login to KDE (Plasma Desktop) from the KDM menu. When trying, the background image of KDM flickers a bit and I can see a hint of the bottom panel contours before it disappears again and only the KDM background image is shown. I have the right click menu working and also I can see started applications when alt+tabbing as white squares on the screen but no plasma desktop appears. It's as if the KDM background image blocks the desktop behind it.
If I switch to a console and init 3, log in as root and then run startx...the KDE Plasma Desktop loads and works brilliantly, but I cannot do this as a non root user.Logging in to IceVM from KDM works as a normal user.I figured this could be some kind of permissions issue so I tried creating a new user but I had no luck with that either. Does someone have any tips on how to solve this problem or a way to troubleshoot it?
I am neither sure what these are called not if this is the proper place to report the problem, please let me know if there is a better place.The consoles that should ne invoked using CTRL-ATL-F1...Fx are simply not there or cause my OpenSUSE 11.2 64-bit to crash. If I hit a combination like CTRL-ALT-F3 (say), my screen goes completely black (there is absolutely nothing on screen), not only that I cannot return to X (using Gnome, if that makes a difference), none of the CTRL-ALT-Fx work after that and I must do a hardware reset.
View 2 Replies View RelatedI enabled Automatic Online Updates in opensuse 11.2, and set the frequency to "Daily", but after 24 hours I haven't seen an update. It may be because I had YaST still running and maybe the installed software database was locked.At any rate,ow can I verify that Automatic Online Updates are scheduled?
View 4 Replies View RelatedI recently downloaded the i686 11.2 and right before it seems as though the Live CD is going to load, with the cursor and the black screen present, it takes me straight to 'linux login'. It states that runlevel 5 has been reached, the failed services in runlevel 5 are postfix and the skipped services are nfs if that's of any significance. I have no idea where to start; looking around it looks as though this is a graphics card issue. My laptop has Intel X3100 integrated video. How can I manage to get the LiveCD working?
(Also, if let it sit at the login for a while, it says "usr/sbin/stop_preload: line 4: /usr/bin/killall: Input/Output error)
I have a new install of opensuse 11.2 with gnome as desktop & gdm as window manager. Login OK. I added the Gnome community repositories & packman & ran an update. Now, with gdm login gives just wallpaper & no desktop. If I change to xdm as window manager I can login OK. The installed version of gdm is gdm-2.28.2-1.3.i586.
View 1 Replies View RelatedI've recently installed opensuse 11.2 on my MSI wind & I am trying to do a software update for flash/mp3/java etc... compatability but the updater is not working.
Also, when I try to add the Pacman repository, I get an error message saying "Warning unable to download list of repositories or no repositories found"
It seems that the touchpad has stopped working on my Acer travelmate 2490. I don't use it often, so that I am not sure when it occurred, but I suspect it was after my update to KDE 4.3.
View 2 Replies View RelatedAfter I upgraded my suse 11.2 to 11.3 (via zypper dup, all worked well), kdesu is not working anymore. A "kdesu -c /sbin/yast2" for example will not produce any output in the terminal.
View 1 Replies View RelatedI have a z9 volari Graphics card that opensuse 1.2 is recognising but the xgi driver is not present. I get the following when I startx:
auth: creating new authority file /root/.serverauth.4650
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: openSUSE SUSE LINUX
[Code]....
Perhaps my last post about this was too long and hence why nobody responded. So i will try and keep it simple and let the experts advise me.
I have tried installing an rpm that I got from rpm search. Namely xorg-x11-driver-video-xgi-1.5.0-6.1.i586 which seemed to install but when I did a query it said it was not installed, but when I tried to do an install again it said it was already installed ??
There is also a file called xserver-xorg-video-sis_0.9.3.orig.tar.gz which i got from this site. I have not managed to extract it properly yet but will look into that myself. It appears to have in it a makefile, so I presume it is source files and I could really do with some help in that.
I just switched back to the open source radeon driver, since the kernel update may have messed with fglrx for the proprietary driver. if i boot into nomodeset then i have desktop effects, however when i boot regularly, the desktop effects are off and do not work.ATI radeon mobile graphics HD4200; opensuse 11.3
View 1 Replies View Relatedi really like opensuse because it looks cool, heard it has th ebest kde out there, and seems very professional compard to ubuntu and kubuntu and minti have one problem stopping me from using kde, and its in all versions.i use a pppoe connection, and in gnome i simply right go to edit connections, DSL, make new dsl, enter my information, set to connect automaticcly, go to auto eht0 disable connect automaticcly, boom internet at startup. i cant find out how to make a pppoe connection in opensuse at all in fact.the DSL in internet manager is greyed out.this should be something very simple to do, how do i go about doing it?
View 9 Replies View RelatedI am using openSUSE 11.3 in Compaq presario v3000. Its working fine. One morning I found that, my home folder is deleted from the desktop and my mouse right-button is not working on desktop. What can I do?
View 6 Replies View RelatedI try to update my computer through the updater and it does not work, it fails, so it brings me to YaST, and that fails to... what is going on? Why are my updates failing?
View 4 Replies View RelatedI recently upgraded to suse11.4 and everything worked fine for a few months. Suddenly after logging in (GUI - LXDE desktop) the background screen is all what I can see and no menus, not even right click opens anything. Same in KDE desktop. All I can do is throw myself out with Ctrl Alt and F1. startx returns that the server is already running. All I can do is using (as root) "rm -rf /tmp/X0-lock" and then "startx --:1". That opens the GUI but only as root. What can I do that I can log in normally again? By the way I tried to reinstall but I only get to loading drivers and then everything stops.
View 8 Replies View RelatedJust noticed yesterday, don't know how long this has been going on. BUT I won't seem to be able to use any other workstation except number 1. It won't let me move applications between workstations.
View 4 Replies View Related
