How do I get it work with the triggers and analogue sticks? Also, when I try to use it with zsnes and set the controls, it automatically records R2 (J19) being pressed when it's not
View 1 RepliesI have a ps3 controller that i would like to use with the emulator software that i have found for linux. i hear that game pads have worked in linux before but i found nothing that explains on how to do this. i don't want to use it wirelessly though i want to use it via usb.
View 4 Replies View Relatedcontroller for 360 i need it to work with an emulator for roms. Its a mad catz i cant figure it out.
View 2 Replies View RelatedBasically i want it so that the analogue stick on my PS2 controller, which connects via a USB adaptor and is recognized, correctly controls in game characters. It seems to work fine enough in platformers, at least it does with Banjo Kazooie, but with games like perfect Dark it seem to be trying to move forward and look down at the same time, also backward and look up simultaneously and look sideways and move sideways simultaneously , rendering the game all but unplayable.
I have tried running jscal and, apart from the fact that it seems a bit beyond me, it reports "jscal: missing devicename" when i try to run "jscal -c". Do others out there have there analogue sticks working correctly with games like Perfect Dark, or the James Bond games, for example?
I bought a used server and it's in great working condition, but I've got a 2-part problem with the onboard raid controller. I don't have or use RAID and want to figure out how to stop or work around the onboard SATA raid controller. First some motherboard specs.: Arima HDAMA 40-CMO120-A800 [URL]... The 4-port integrated Serial ATA Integrated SiliconImage Sil3114 raid controller is the problem.
Problem 1: When I plug in my SATA server hard drive loaded with Slackware 12.2 and linux kernel 2.6.30.4, the onboard raid controller recognizes the one drive and allows the OS to boot. Slackware gets stuck looking for a raid array and stops at this point -........
I'm not all that familiar with what it is that the expensive SATA cards do, other than providing on-board cache and many ports, but all things considered what can't a CPU and lot's-o-RAM do that an expensive SATA card can?This assumes, of course, that you weren't planning on using the CPU to run other applications (i.e. a SAN type setup).
View 11 Replies View RelatedI can not get the node or cloud controllers to startup using the init.d scripts. I have a fresh install of CentOS 5.4 with Eucalyptus 1.6.2 I have compiled Eucalyptus and all packages using the RPM supplied from Eucalyptus and utilizing yum installer. I do not currently have any processes or applications listening currently on the ports on the boxes as well. I think it may be a permissions issue or something because I get a "permission denied error", but I am not sure if it is Eucalyptus or CentOS. It looks as if it is not binding to the address on the interface of the NIC. It may be something else however. I have the Node controller, Cloud controller, and Cluster controller on seperate physical boxes. When I try to run either the cloud controller or the node controller I get this message:
Cloud Controller:
[root@cluster-cont ~]# /etc/init.d/eucalyptus-cc start
Starting Eucalyptus cluster controller: (13)Permission denied: make_sock: could not bind to address [::]:8774
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:8774
[code]...
I'm not able to configure my microfone. Audio works very well. HW it's OK, mic works well on windows. Recording WAVE 'foo.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo
Plug PCM: Linear conversion PCM (S32_LE)
Its setup is:
stream : CAPTURE
access : RW_INTERLEAVED
format : S16_LE
subformat : STD
channels : 2
[code]...
Well, when I run alsaconf, it finds my 82801H and I go on to setting it up, it says it will run, but it doesnt run.
Quote:
Now ALSA is ready to use.
For adjustment of volumes, use your favorite mixer.
But my song don't work, ..... works, but no sound in that, and i have tried running alsamixer to raise the volume to the peak.
I have a vague idea that, this sound card has difficulty in linux but all I get is 3 year old patches for gutsy gibbon and fixes that are non-slackware so I dont have the files and what not.
I have been trying, but never seem to understand why it says it works when it doesnt work.
Oh turns out, from thinkwiki, [url]
Its AD1984 actually, and it didn't work on 2.6.24.2 mine is 2.6.29.2 .
At the school i work in i have a server2k3 server that provides a domain to all the windows clients, aswell as a fedora server that acts as an imaging machine and webserver.
Im rather concious of the fact that if for any reason the Server2k3 server was to die there is no backup of active directory, or anything that can take its place whilst a replacement is found.
So is it possible to use a fedora machine with samba as a secondary domain controller? so it can be used as a login server, and has a copy of AD.
i using wine windows windows compatibility layer(beta release) , i tried ride(micro controller and micro prosser simulator)open with wine , but it not work properly..
View 2 Replies View RelatedI'm trying to find a reasonably priced PCI to IDE controller that will work under Karmic. I have just built up a new PC which has SATA HDDs and want to put my old IDE drives in it. It has only one IDE interface on the mobo which I've got my DVD/CD drive on.
My research so far has found users have tried in the past with varying success.
I have a PS3 Sixaxis controller, and a USB cord. I downlod "QtSixA" properly, and in the GUI, a controller is recognized as a USB controller.However, when I open up emulators, or games, I'm unable to map controls to the PS3 controller, or anything. What am I doing wrong?
View 5 Replies View RelatedCan I use my PS3 controller to run Nestopia? And if so, what is the most efficient way to set up Nestopia and the controller?
View 2 Replies View RelatedI am attempting to upgrade my system to remove the two aging IDE drives and replace them with four SATA drives. I already have one SATA drive, which means I need a total of 5 SATA ports. My motherboard has two, while I had an existing PCI controller card (Promise TX2-Plus) with two ports. I purchased another card that uses the Sil3112 chip with two ports of its own.I have been running with the one Promise card with no problems for quite some time; lspci output is
Code:
sarmitage@ophelia:~$ lspci
00:00.0 Host bridge: nVidia Corporation nForce2 IGP2 (rev c1)
00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)[code]....
how I can get these two cards working together?
Anyone know how to do that? btw when i execute xinput list it doesn't show my connected controller.
View 2 Replies View RelatedI'm having a problem with the installation of Ubuntu Server 10.04 64bit on my IBM xSeries 346 Type 8840. During the installation the system won't recognize any disk, so it's asking which driver it should use for the RAID controller. There's a list of options, but nothing seems to work. I've been searching the IBM website for an appropriate driver, but there is no Ubuntu version (there is Red Hat, SUSE, etc). I was thinking about downloading the correct driver onto a floppy disk to finalize the installation, but apparently no 'general' Linux driver to solve the problem here.
View 1 Replies View RelatedI'm having a problem connecting a motion controller through the Ethernet port. Here is what it does If I connect the Ethernet cable from the computer to the controller, the connection is not recognized. If I connect it from the computer to my router, it will connect automatically. If the computer is connected to the router, and I unplug the router and quickly connect the controller, it will automatically recognize it.Also, when I connect the controller with quickly unplugging the router, I can't manually connect it using the wired connection "Auto eth 2". When I click on it, it thinks for a while and then says Wired Network Disconnected.
Is there a way to initialize the Ethernet port automatically to recognize the motion controller, or is there a way to do it using C++ (that is what I'm suing to communicate to the card since it has special libraries) I find this kind of weird. I want to just be able to plug in the controller and be able to use it.
Anyone know where i can get drivers for LyCOM ST-124 Raid 5 controller?
View 1 Replies View RelatedDo any of you have kids who play Secret Maryo? And can any of you recommend a game controller?
View 2 Replies View Relatedwhere i can get drivers for LyCOM ST-124 Raid 5 controller?
View 3 Replies View RelatedI installed ubuntu for the first time tonight and to put it simply everything is very confusing. I have been looking at different forums and everyone is installing programs in code and tbh i have no idea how to and i was wondering is there a program available that lets me monitor my CPU temp & alter fan speeds?
View 4 Replies View RelatedI've just begun with a fresh USB install of Ubuntu 11.04, and have run into the seemingly standard wireless network issue with the Broadcom 4311. I've read countless posts on this forum, and have installed the STA driver "proprietary..." through the GUI driver installer.
The usual symptoms seem to persist; I can connect to the network using my wired connection, but when I unplug no wireless network connections kick in, or show up, or seem to be responsive anywhere..Also, I should note that I've read the forum post HERE but without much further understanding or resolution.
i am using ubuntu media on a desktop for all of my multimedia needs and i just installed jaunty (alt install) on an old gateway solo laptop(266 mhz and 186mb ram) to use as my controller/remote using desktop sharing, the problem is the laptop can't keep up with the desktop and everything is all jerky (especially watching dvds). So here are the questions, what can i uninstall from the laptop to make performance better and/or is there another option short of buying a wireless keyboard/mouse (I'm poor and use what I have(besides i like having an up-close display for text and stuff)).
View 9 Replies View RelatedI just installed the latest version of Mint xfce on my old inspiron 8000 with a microsoft MN-120 pci ethernet card, and though the card shows up as hardware, it is not recognized as a network interface. I believe there is no driver loaded for it.
It's an old card, but it seems the kernel still supports it. There are instructions for activating the dc driver that appears to be the proper driver for this chip set, but those instructions originated from freebsd and I'm not sure they translate well. See here:[URL]
I did find a kernel config file, but I was afraid to add the suggested lines to it because there were no other lines specifying "devices". They all started with "config".
I'm looking for info on setting up a piano type usb keyboard (also called midi controller?) in ubuntu. Any of the references I have found cite alsa, and I'm assuming they won't work with pulse. Also I'm sort of stalling on purchasing said keyboard until I feel there's a reasonable probability of it working. Here's a reference with alsa [URL].
View 1 Replies View RelatedI shall start off by saying that I have just jumped from Windows 7 to Ubuntu and am not regretting the decision one bit. I am however stuck with a problem. I have spent a few hours google'ing this and have read some interesting articles (probably way beyond what the problem actually is) but still don't think I have found the answer.I have installed:
Distributor ID: Ubuntu
Description: Ubuntu lucid (development branch)
Release: 10.04
Codename: lucid
I am running the install on an old Dell 8400. My PC has an Intel RAID Controller built into the MB. I have 1 HDD (without RAID) (which is houses my OS install) and then I have 2 1TB drives (These are just NTFS formatted drives with binary files on them nothing more.) in a RAID 1 (Mirroring) Array. The Intel RAID Controller on Boot recognizes the Array as it always has (irrespective of which OS is installed) however, unlike Windows 7 (where I was able to install the Intel RAID controller driver) .Does anyone know of a resolution (which doesn't involve formatting and / or use of some other software RAID solution) - to get this working which my searches have not taken me too?
I have the usual problem of "My sound is not working". I have a few images and my output from:
Code:
lspci
Code:
lspci -v
and
Code:
aplay -l
I can't really do anything with the speaker as it is hidden in the case.
I have a Dell PE 600 box with 2 Adaptec 2110s U160 Single Channel RAID controller supported 6 HDDs.I am trying to install Ubuntu from a mini ISO - tried server / desktop / alternate as well. And also different Ubuntu versions.The mini installer runs upto setting the time zone (after configuring for DHCP et.al.) and then on the screen 'Detecting Disks and Other Hardware' hangs up.Now I am assuming its because of the fact that I have 2 of the above controllers - as I have another similar box with only 1 of the controllers and it installs/boots fine with no problems.Look forward to you suggestions/help and if there is any other info I can provide. I plan to set up Ubuntu 10.10 server on it. Btw I don't think its a Linux problem as SUSE 11.3 installs fine on the box.
View 1 Replies View RelatedWhen I used the LiveCD, it made me give it a password for the keyring, I made it lol, because it's a livecd session. After I installed, the wireless controller asked for the password again. I then changed it. When I installed Ubuntu previously, it didn't ask me for any of that, it just defaulted the keyring password to my user password or something like that and asked me if the wireless controller should have access ONCE. Now every time I boot I need to type the keyring password in again.
View 1 Replies View Related