Is there any linux command to find out the BMC Controller's mac address? The tools like ipmitool provide ways to configure IP to the lan of BMC controller, but our goal is to find out the MAC address automatically using some commands/tools.
View 1 RepliesIf I give "ifconfig" in my laptop I get eth0,lo,wlan0.In that where do I find my Ip address in Ubuntu in 10.04. In eth0 I dont find inet address.Where can I find it?
View 2 Replies View RelatedI have a computer and I need to know whether its Sata-controller supports hotplugging. Therefore I (think I) need to know which Sata-controller is used in my computer. Can anyone tell me how I can find that piece of info?
ps. Some info on the environment: It is running an AMD Geode processor which only support IDE and therefore the board has a Pata to Sata converter build in. When I do 'lspci' it only shows the IDE connection:
root@voyage:/etc# lspci
00:01.0 Host bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge (rev 33)
00:01.2 Entertainment encryption device: Advanced Micro Devices [AMD] Geode LX AES Security Block
00:06.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev 96)
00:07.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev 96)
00:08.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev 96)
00:09.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev 96)
[Code]...
I am trying to find out the mac address of the eth0 port on linux probe. This port is controlled by kernal and hence I don't have control over it. How do I find out the mac address of this port ? Is there any system call which will take the ip address and will do the lookup on the linux's ip table to get the mac address ?
View 6 Replies View RelatedI am unable to find Atheros AR8132 PCI-E Ethernet Controller driver for CentOS which is installed on my netbook.
I contacted DELL to provide me the driver and they said that they do not support Linux on netbook and I have to arrange it myself.
I told them that I don't need help in installing I just need the driver file to which they said that they don't have driver for Linux.
NIC is getting detected and works fine on the same netbook (Am dual booting Windows7/CentOS) with Windows7
When I type: ls -l /dev/ it does not show up eth0. Same result with ifconfig. When I type lspci | grep net it does show up something like Atheros Communications AR8132 L1 PCI Gigabit .
I just finished a build of a new GNU/Linux boxen with openSUSE 11.2. I have a MSI Big Bang Xpower X58 motherboard which has two SATA controller chips, one is the standard Intel ICH10R chip for SATA 3.0 Gb/s and one is the Marvell 9128 chip for SATA 6.0 Gb/s. The BIOS recognizes the Western Digital Caviar Black 6.0 Gb/s drive on either SATA controller chips, /however/ I am unable to install (and boot) when the drive is connected to the Marvell controlled ports. As you can guess, I'd like to boot from the faster interface!
1. The BIOS allows me to select the Western Digital drive as a secondary boot device, so I know, at least at the BIOS level, it's there. This is true whether I have the drive connected to the Intel or Marvell ports. (The DVD drive is the primary boot device.)
2. When trying to install openSUSE 11.2 from DVD, the installer says that it can't find any hard drives on my system when I have the drive connected to the Marvell port. The installer finds the drive fine when it is connected to the Intel port.
3. I installed everything with the drive connected to the Intel port. I switched the drive to the Marvell port afterward and the system refuses to boot completely, stalling at some point where it starts to look for other filesystem partitions. This led me to conclude that perhaps the problem is with openSUSE and not hardware weirdness with the system having two separate SATA controllers?
where i can find a driver for Multimedia audio controller: nVidia Corporation nForce2 AC97 for Linux
View 5 Replies View RelatedI can not get the node or cloud controllers to startup using the init.d scripts. I have a fresh install of CentOS 5.4 with Eucalyptus 1.6.2 I have compiled Eucalyptus and all packages using the RPM supplied from Eucalyptus and utilizing yum installer. I do not currently have any processes or applications listening currently on the ports on the boxes as well. I think it may be a permissions issue or something because I get a "permission denied error", but I am not sure if it is Eucalyptus or CentOS. It looks as if it is not binding to the address on the interface of the NIC. It may be something else however. I have the Node controller, Cloud controller, and Cluster controller on seperate physical boxes. When I try to run either the cloud controller or the node controller I get this message:
Cloud Controller:
[root@cluster-cont ~]# /etc/init.d/eucalyptus-cc start
Starting Eucalyptus cluster controller: (13)Permission denied: make_sock: could not bind to address [::]:8774
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:8774
[code]...
Basically i want it so that the analogue stick on my PS2 controller, which connects via a USB adaptor and is recognized, correctly controls in game characters. It seems to work fine enough in platformers, at least it does with Banjo Kazooie, but with games like perfect Dark it seem to be trying to move forward and look down at the same time, also backward and look up simultaneously and look sideways and move sideways simultaneously , rendering the game all but unplayable.
I have tried running jscal and, apart from the fact that it seems a bit beyond me, it reports "jscal: missing devicename" when i try to run "jscal -c". Do others out there have there analogue sticks working correctly with games like Perfect Dark, or the James Bond games, for example?
At the school i work in i have a server2k3 server that provides a domain to all the windows clients, aswell as a fedora server that acts as an imaging machine and webserver.
Im rather concious of the fact that if for any reason the Server2k3 server was to die there is no backup of active directory, or anything that can take its place whilst a replacement is found.
So is it possible to use a fedora machine with samba as a secondary domain controller? so it can be used as a login server, and has a copy of AD.
I need to find mac address when i know the ip of one client ( for example ). How can I do this ? ( Command )
View 9 Replies View RelatedI want to know how I can investigate...
Q1- what IP address somebody has in the same network?
Q2-Is there any command I can use to figure that out?
I have a Brother MFC-5490CN AllIn One on a LAN and I need to know it's IP address.
How do I find the address?
Using linux, how can I find out the IP address of a computer based on its MAC address?
View 1 Replies View Relatedwhat would be the simplest way to find out device IP address? I don't know its factory set address, so my plan is to connect laptop directly to it with ethernet. it should respond to ping.
View 7 Replies View RelatedI am setting up a server on a Intel Nuc PC. I have a problem though. I cannot get it to find a IPV4 address.
View 14 Replies View RelatedI want to find the MAC address of another pc connected to my pc through LAN. That PC is showing GRUB load error so i cant boot it.
Can i find its MAC address through my PC? Both PC's are connected in LAN.
I work at a University and every year or every other year we get new computers for the campus. More often than not it is my job to document the mac address for each PC. I'm trying to save myself time when I have to do this again. Can I make a script to find the mac address on boot up? Or perhaps I should make a customized distro of linux? Booting off of usb would be ideal.
View 2 Replies View RelatedI need the command to find the HARDWARE ADDRESS.
I know ifconfig command gives the details.. but I just need the HWADDR that is only numbers eg. 00.22.11.33.AD
I need to find myselfe unused IP address in some subnet.
How to determine that particular IP is ununsed in that subnet without asking network admin ?
How to find and change mac address ?
View 5 Replies View RelatedI have a file called abc.txt which has following contents.
10.180.8.231=31608
10.180.8.232=29011
10.180.8.233=31606
[code]....
a friend created an IP address for me.where do I find the Host in Linux in order to put the IP address.
View 2 Replies View RelatedI have a HP Officejet 6310 as a network printer
How do I find the network address of the printer so I can install it?
I have two computers one with Ubuntu Server (just for fun) and another with Ubuntu Desktop. I connected them with one LAN cable so there is no internet and what I want is to open firefox in Ubuntu Desktop and view the apache test page but I can't find IP address, ifconfig just displays the ipv6 one?
View 5 Replies View RelatedI don't really have a reason for this currently. I recognize all the MAC address on my DHCP client list and keep it rather well locked down. I was just wondering if there was something I could run on the terminal to get more information on a given MAC address on my network. Something kind of like whois for websites.
View 1 Replies View RelatedI desire to access a WD Netcenter network drive from Ubuntu 10.10 using NFS mounts.Several on line helps show how if you know the IP address of the drive. How can I discover the IP address of the drive. My Windows network is using DHCP, though I understand that the drive uses a static address. I know the MAC address of the drive. As a user (but not an administrator), I have much Unix experience.
View 3 Replies View RelatedWe are running samba on a Fedora release 8 (werewolf). The samba server is located on a dmz subnet off of my Cisco ASA 5510 firewall. From my inside network I have no problems connecting to the samba shares. However when someone uses a VPN connection they cannot connect to the samba share. VPN users are assigned an address from a pool which has no problems getting to the dmz based samba server. All ports required are open on both firewalls (Samba server and PC with VPN connection.) I consistently get an error saying Windows cannot find the ip address of the samba server. I have looked at the samba logs in varlogssamba and found a complete list of connection attempts listed by ip address. These addresses match the pool addresses that are being assigned by the firewall when someone tries to connect using the vpn.
Each entry has this:
lib/access.c:check_access(327)
connection denied from (ip address that is assigned by firewall)
smdb/process.crocess_smb(1062)
connection denied from (ip address that is assigned by firewall)
I checked the smb.conf to make sure the subnet the pool addreses is listed in the global section. It is.
How to find the Address which is already in 2632 port?
View 1 Replies View RelatedIs there any tool or command where I can track down the IP-ADDRESS of a machine within the subnet using its MAC-ADDRESS .
View 11 Replies View Related