I would like to install Ubuntu (latest stable) on a VirtualBox machine, set it up, install several apps, and then deploy it on a real PC. I think the main issue is the new hardware (which sould be different from the 'virtual' one). What should I do at that time? Is Ubuntu able to detect and install the new hardware?
View 1 Repliesi have installed fedora 14 with so many libraries ,development tools installed on my pc but i usually have to present some projects which can run on my system .........and can't be executed or compiled due to absence of libraries and tools there so, i there some way to so that i can use this current installation on my hard drive of my pc to some external media like external hard disk and plug and use that installation anywhere on any system..
View 2 Replies View RelatedThe HDD on which I currently have my Ubuntu partition(s) (as well as a Windows partition) is dying on me (non-zero bad sector count, with warning pop-ups from Ubuntu). I have already ordered a replacement hard drive*, but I was wondering if there is a simple way to transfer the contents of my current hard drive to my new hard drive in such a way that the new one will be a fully functional replacement (e.g. so that everything will boot and run properly on the new hard drive). Which is a different size (bigger) than the current drive.
View 5 Replies View RelatedI have a newly built desktop with not disk drive yet. I just put Ubuntu 9.10 onto a flash drive successfully and booted it onto my desktop. It boots up the Installer boot menu and asks me if i want to run Ubuntu from the USB or Save it to hard drive. I select save to hard drive but when i turn the pc off and take out the flashdrive Ubuntu does not stay on the machine?
View 4 Replies View Relatedis there a way to write/unpack .qcow2 hard disk image directly to real hard drive in Linux?(I know it's possible to unpack .qcow2 to .raw and then dd to drive, but I'd like to skip .raw since its large)
View 2 Replies View RelatedMy parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
I want to install Fedora by live disk on virtualbox.
1. I ran the live disk, it works.
2. I click "Install to Hard Drive", it shows normal.
3. I complete the installition and reboot.
4. The live disk ran again, where is the OS installed on hard drive? or it was not installed at all?
I am running Ubuntu Studio 9.10 on Microsoft Virtual PC. After using it a lot, I have decided to move to a real machine. The thing is, I don't have the time to reinstall ubuntu and all the programs and move my docs.So i wanted to copy/move the content of my virtual HDD to put it on a real one. But when I try copying th e OS, it says that i don't have permission to do that. What can I do?
View 1 Replies View RelatedI am buying a new laptop and of course it comes with Windows 7, I prefer not dual booting and want to keep windows on a separate hard drive for that once in a blue moon I need windows, the hard drive is pretty sweet and I would rather use the new hard drive for Ubuntu and put windows on a smaller slower drive.The laptop obviously dont come with the Windows CD
View 5 Replies View RelatedI have one hard drive that is filling up and I went and got another hard drive and installed it into the machine. How do I move files from the full hard drive to the almost empty hard drive. I only have about 400mb left on the full drive. Or should I move the Ubuntu 8.04LTS OS to the new drive?
View 2 Replies View RelatedI'm sure that this is posted somewhere but I have not been able to find the right search terms. I have a Dell Vostro 1700 which has 2 physical hard drives. I installed Natty to the 1st drive and during the install I used the entire 2nd drive as /home. I would like to upgrade the 2nd drive to a larger faster drive. I have the new drive in a USB enclosure so that I can access both drives. I'm pretty sure I need to boot from the CD to do this. Then I need to copy all files unmount the small drive then shut down, install the larger drive and have the system recognize it as /home. I am just starting to creep out of N00B stage and don't want to screw this up.
View 2 Replies View Relatedi have HD contains RH3 enterprise and i wanna move it to new PC, keep the framework is working without any error?
View 2 Replies View Relatedi want to move a directory to an external hard drive this is what i did
Code: konlah@konlah-laptop:~/Downloads$ sudo mv -i LinuxCBT /mnt/EXTERNAL after that i did
Code: konlah@konlah-laptop:~/Downloads$ ls so the file wasn't there anymore.. but i couldn't find it in my external hard drive.
I have installed the CentOS 5.4 Virtualbox, I downloaded the dvd.iso on my (windows xp) and I installed it straight from there.
Installation went ok, but whenever I start the Centos it boots from the dvd.iso and force me to install or upgrade it again.
I came in this morning only to find that the Intel Core2 hyperthreading Dell machine is dead. It appears the processor is fried.
I have a new white-box X2 system that I will replace the dead Dell with. The X2 (AMD) does not have a hard-drive (HDD) so, I will simply put the SATA hard-drive into the PC.
Some of you may know how to do this, but I don't know where to begin after I get the Hard-drive in. (I know how to move a Windows configuration from one PC to another and handle it as it begins to blue screen (BSOD), but I don't have a clue with Linux)
This system was built with GRUB. At the very least, I expect the GRUB boot managet to surface on the display. But, what next....
I was testing an OpenSuse setup as a server. Nothing fancy and NO applications added. The only customization was the MB's LAN card and the display was set at 1024x768. I had 2 users, root and myself. What would you do? Is there some boot time options that I should follow?
Am I able to move Music folder to a different hard drive without moving my whole /home or do I just make a folder there and call it Music and change all the programs that use the music's default music folder?
View 3 Replies View RelatedI did a quick search but came up with nothing. I'll list things in point form to make it less confusing
-I'm running Ubuntu 9.10 with GRUB 1.97
-I have Windows 2000 installed on VirtualBox
-I have an NTFS partition with just music and my data on it, but no windows OS
-I want to take what I have on VirtualBox and put it on my NTFS partition
I wonder if anyone can help me. A little background, I wanted to move my xp install to a bigger hard drive. I used Saikee's method and worked fine (as usual). My machine was a dual boot system, the xp partition was with little space so I get rid of my vista install, deleted its partition. That went fine also. Rebooted directly to XP.The problem is as follows:
a) In order to increase the size of my xp partition (old machine, athlon64 1gb of RAM) I moved my data partition to the left in order to have unallocated space near the xp partition. That was successful, I rebooted and everything was fine.
b) I run again Gparted and increased the size of the partition. Gparted told me the process was successfully applied. I rebooted.
c) after post I get the following error "error reading disk, press ctr-alt-del". I did it like five times and I get the same message.
d) With my xp install disk I tried fixboot and fixmbr and nothing changed
Since I have the original hd, I did it again, and the same thing happened after resizing xp partition, before the resizing process I was able to boot normally. I used Gparted live cd v 0.6.2 and as far as I recall I left "adjust to mib" option
I've got a windows partition with a lot of free space followed by an extended partition. The extended partition has three sub-partitions: grub/boot&everything else, home, swap.
I'd like to take some of the free space out of the NTFS partition and move it down into the extended partition for Ubuntu to use.
I've successfully shrunken the NTFS partition. Now I've got 5gb of unallocated space between the end of NTFS an start of the extended partitions.
Now I want to extend the boot/everything else sub-partition within the extended sub-partition.
Using the gParted live CD I'm:Resizing the extended partition (growing it forward by 5gb)
Resizing the boot/everything sub-partition forward by 5b
When I try to apply the changes I get an error: Unable to satisfy all constraints on the partition.
Is it possible to move this space into my extended partitions so Ubuntu has more space?
This is the equivilent of a DJ going into the"dusty records bin"to play an old song.I've got a hard drive that's left over from a Mandriva Spring 2008 computer and I need to copy the photos off it to a DVD and move them to a computer running Ubuntu.I can't seem to get the Ubuntu computer to access what's on the Mandriva drive, so I've loaded Mandriva Spring 2008 on another computer.
I've accessed the photos I need easily enough, but can't copy them to a storage medium so I can move them to the other computer. I've tried two USB devices, an external DVD drive and a flash drive and can't just copy (or drag 'n drop) the files to the other devices.This evening I may try a portable hard drive, again with a USB connection, and see if that works.
If there's a fool-proof way to do this by using a terminal, I'll try that. I haven't been able to devote enough time to Linux to familiarize myself with terminal commands. Or, if there's a program that will run under Mandriva Spring 2008 that will let me accomplish the transfer, I'll try that as well.
I have ubuntu running inside of a virtualbox on an xp machine. Is there any way to mount the hard drive that the virtual machine isn't using? AKA the C: drive of the computer?
View 8 Replies View RelatedI use Unity 11.04 on a 64-bit machine with 8Gig and a TB hard drive, so resources shouldn't be a problem. The pane on the left hand side (showing my computer main folders has disappeared when I click on "Home Folder". So has the ability to have two panels. I can see the hole folders but not any of the extra folders (dragged folders or usb sticks).
I now use Krusader which solves most of my problems. However there is a folder of files I use a lot, so before I lost this ability I had draged the folder to the left hand column showing all my folders. Now I can't access the folder I had dragged to the left hand panel, and it seems to have disappeared from its original place.
I did an installation of SUSE 11.2 on a new SCSI hard drive. Keeping the old hard drive separate. I remembered there was some info on the old hard drive I wanted. I added this to the system and mounted a partition. I then copied the data over. Then I umounted the partition rebooted the machine and removed the hard drive. However the machine will now not boot without this hard drive even though its not mounted. Not sure what the error message I am given means I think it could be trying to fchk it. Do I need to do something more like remove /dev/sdd?
View 2 Replies View RelatedHave a machine running Fedora Core 4 that has been used as a mail/web server. Now want to transfer drive to a newer machine. Can this be done without having to re-install fc4 and what becomes of current network settings
Very new using linux but must get this done soon
So I install Ubuntu 10.10 on a multi-drive, dual boot with windows 7 computer. At almost the end of the install, I see "running grub-install sda" or whatever it is. sda is my windows drive.So rather than asking where to install the bootloader or give you the option like it used to, it just did it to my "first" drive.
What the hell? Now my Windows MBR is gone. I like to maintain that so if my linux drive dies I can still boot into windows via the old windows boot loader.Possible to move Grub2 to my other drive and repair windows 7 drive MBR?
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
View 1 Replies View RelatedI've been landed with a disk from a friend whose machine we've never managed to get into the BIOS of and tweak the boot order to include a CD drive.
I pulled the disk from my own system and ran a from-scratch install on this shiny blank disk with numerous of the tweaks I like and he'll need. (Getting pleased with how the time to usable is still dropping doing an install).
What I'm concerned about is sticking this disk in his machine and using it. I've gone with the sort-of generic 32-bit base even though both his machine and mine are Athlons. However, he's a musician and has some rather nice audio kit - as well as, I suspect, different video hardware.
Am I likely to hit noticeable problems? Is there some script I can arm myself with to rescan available hardware and update config, or can someone give a list of packages to completely remove then reinstall via the recovery boot?
I know the latter option may well cause some dependency problems that see stuff I've already installed lost - I can cope with that if I can get the GUI running smoothly.
Evolution 2.10.1 how do I move my settings to a new machine?
View 2 Replies View RelatedCan one install Linux on a dedicated hard disk on one machine, then move that disk to another machine and boot from it? I know Windows won't allow you to do that, but can it be done with Linux?
View 9 Replies View RelatedI want to install Ubuntu 10.04 to another machine alongside that other machine's XP. I know I could just run the install disc; but I'd like to take what changes I've made to Ubuntu along with it - for instance, TrueCrypt, Simple Backup, AdobeReader 3 (I think that's an addition), K3b, MuseScore, and some other applications I've added along the way. Also, I went thru some Terminal commands to get Brasero to copy CD's recently and would like to avoid doing that again.
View 1 Replies View Related