Hardware :: Installed Slackware 13 - Laptop Switches Off
Aug 29, 2009
This morning I installed Slackware 13 i386 and started configuring it. I've got a problem as my laptop has turned off unexpectedly twice since I started using Slack 13. I don't know if it's related to Slackware 13 but it has never happened before on this laptop with Slackware 12.2 or any other system. The first guess would be overheating. I checked the laptop's BIOS but could not find anything related to cooling down.
The laptop seems quite hot but it's nothing unusual for it. I also noticed that acpi is not installed by default. Would it make much difference? The laptop is pretty new (6 months) and the cooling module seems to be clean. The only thing that differs from my previous installations is that for the first time I installed ATI's fglrx and enabled desktop effects. Could it be a buggy video driver?
View 13 Replies
ADVERTISEMENT
Nov 3, 2010
I was trying to plug projector on my laptop with slackware 13.1 installed. The problem is that the projector stops showing whenever I start X. I can see everything starting from LILO loader, but whenever I type "startx" - bam, no signal or just a black screen on the wall. I try to switch to console mode with ctrl+alt+f1 - the view appears, switching back to X with ctrl+alt+f7 - view disappears. I am using awesome WM. I tried XFCE, but the result was the same. I also tried to change resolution to
Code:
xrandr --output default --mode 1024x768 / 800x600
, but again, no difference. My laptop is ASUS F3Jc. Fn keys doesn't help as well.
View 9 Replies
View Related
May 9, 2011
I got wireless printing working on my mom's computer... Then when I upgraded the laptop to 11.04 it wouldn't boot properly. It shows the Ubuntu splash and then switches to a console where I can see services starting and stopping. It freezes when it's going through this section of startup. I rebooted and started the machine in recovery mode, then selected low-graphics from the list. It works in low-graphics mode in Ubuntu Classic (my mom doesn't want Unity so I set Classic as the default)
View 5 Replies
View Related
Jun 28, 2011
I have installed multilib support in my 64bit slackware 13.37 installation than I proceed it to install google earth from slackbuilds... and did ln -sf /lib/ld-linux.so.2 /lib/ld-lsb.so.3Now when I try to run google earth I get:[ 760.092745] googleearth-bin[3647]:segfault at 984f7d31 ip 00000000984f7d31 sp 00000000ffbfe100 error 4
View 14 Replies
View Related
May 15, 2010
I've tried a few different ways to install the ATI graphics driver "fglrx" to get 3D acceleration.If I try to install using the standard file "ati-driver-installer-10-4-x86.x86_64.run" from the ATI web site it appears to work but then I discover it actually got an error.I saw a reference to ATI requiring 32-bit libraries to install their 64-bit driver. Is there a link or post that explains how to add the 32-bit libraries. Will that solve the problem, or will I just waste more time trying that?
View 6 Replies
View Related
Mar 30, 2011
I've installed 11.4 on the laptop. So far there hasn't been a huge leap of difference between the 11.3 and 11.4. But now I can't use Skype. It's installed and all of that. But whenever I open it, nothing happens.
View 6 Replies
View Related
Mar 15, 2011
so i have been trying to get hamachi installed on my ubuntu 10.04 laptop but i am not sure how to go about it.
View 4 Replies
View Related
Jun 13, 2011
I'm not computer savvy at all - a friend just installed Ubuntu onto my laptop and I can't get the WIRELESS to work. I'm not sure what info you need so let me know...
View 1 Replies
View Related
Aug 17, 2009
Looking for a joystick recommendation for a laptop installed with FC8 (kernel 2.6.25-?)
View 1 Replies
View Related
Apr 28, 2010
I am trying to install openSuse 11.2 on my laptop which has Windows Vista installed. I don't want to delete my Windows Vista that is installed. provide instructions on how to do this?
View 3 Replies
View Related
Jan 7, 2010
I've just installed ubuntu 9.10 on my laptop, and when I'm on vim, I can use arrow key normally in command mode, but in editing mode, if I use them, it print a letter, capital case + new line and doesn't move the cursor.
In putty I would try to play with the different type of keyboard settings (ESC[~, Linux, Xterm R6, VT400 etc...), but here, I don't know what to do.
At the installation time, I choose French/French keyboard.
Extra Question :
[URL]
It's said to have GRUB2 by default, but at boot time it says Grub 1.97 beta...
View 3 Replies
View Related
May 30, 2010
I get 3-4 clicks every minute, until I realized the problem and installed "laptop-mode-tools". After that things are back to normal.Why isn't laptop-mode installed by default in Lucid? This is a simple work-around which should be imposed by default, so users' hard discs won't be damaged.
View 1 Replies
View Related
Mar 22, 2011
I have just installed 10.04 on a dell inspiron laptop, but the wireless adapter will not work. I uses a broadcom BCM4312. When I click on the wireless icon, it says "firmware missing". Normally, I would connect to look for proprietary drivers, but my problem is that I live in an apartment complex with only wifi.
So my question is, A) does this sound like a driver problem, and B) if so, how can I get the necessary driver installed (after downloading it with another laptop) when I use lshw, it does show the wireless device, by says that it is disabled. I tried following the directions here [URL]... (changing "ieee80211_crypt_tkip" with "lib80211_crypt_tkip" due to the rename in 2.6.29. I think that is correct), but that did not work either.
View 5 Replies
View Related
Jun 9, 2010
boots fine if an external monitor is plugged in, otherwise the laptop screen just flashes white till it dies and reboots. lsmod says nouveau is loaded, however it lets me rmmod it as though its not in use. rmmod on the nvidia mod says it is in use. nvidia settings can change the resolution of the external monitor
used yum to install and built from scratch, both have the same result. reason i want to get rid of nouveau is because it detects my laptop resolution as larger than it is and even if i lower the resolution it still stretches it further than the boundries of the screen. without the nvidia driver my laptop display is recognised correctly aside from size issues.
Enabling the nvidia driver / etc / rc.d / init.d / functions line 526 1484 Segmentation fault "$@"
[FAILED]
^^ that appears during boot.
View 1 Replies
View Related
Feb 4, 2011
I'm currently trying to add OpenSUSE to my Laptop which already has Vista Ultimate installed, hoping I will end up with a dual boot system. Currently, my HD is divided into four partition: Vista Ultimate with Bitlocker enabled needs two partitions - one for the unencrypted boot files, and one for the rest of the system. Then I have an unencrypted partition for data that I don't want encrypted, and finally the partition in which I plan to install Linux.
I have already installed OpenSUSE to that fourth partition, and it worked just fine. But now, I'd like to reinstall with LVM, so that I can use encryption as well. Upon installation, however, I get the following error: Code: Error Failure occurred during following action: Creating volume group system fromv System error code was: -4004 I'm wondering if this is because I'm running out of (primary?) partitions? Seems like LVM, just like Vista Ultimate, needs two partitions, one for the boot files and one for the rest of the system. I've read something about a PC drive only being able to hold four partitions, so I'm wondering if I need to get rid of that extra unencrypted partition I have in order to get OpenSUSE with LVM installed. Or am I barking up the wrong tree?
View 2 Replies
View Related
Mar 13, 2010
got a laptop of hp with amd neo m40 pro and 2gb ram.. with vista installed.the worst OS.... i want to install linux with dual boot since am not expert in linux.these are the specs:
hard disk is 250 gb
c-155gb , d which is for recovery is 10.6gb, e-46.8gb
and an unallocated disk of 20gb
tried to install fedora which couldnt recognize the hard disk partition got ubuntu and tried.. but i dont know where it got installed now my 20 gb unallocated disk is showing as two partitions one of which is 1 gb and the rest is 18gb. how to uninstall ubuntu now. i want to repartition it and install it in proper way is 20gb enough.
View 3 Replies
View Related
Jan 2, 2011
I'm trying to get wireless access on a laptop with freshly installed Fedora 14 32-bit, but I'm having some issues. I ran the diagnostics advised in this thread: [URL]..Here are the results:
Code:
[root@localhost]# lsmod | grep iwl
iwl3945 97265 0
iwlcore 160590 1 iwl3945
mac80211 188648 2 iwl3945,iwlcore
cfg80211 110951 3 iwl3945,iwlcore,mac80211
[Code]...
View 1 Replies
View Related
Mar 19, 2010
Has anyone tried to install Karmic on a laptop that has HP's new Linux on a chip OS installed? I think it's a scaled down Splashtop desktop and at least a portion of the OS is hardware based. I sure wonder what would happen if/when I try to install grub and Ubuntu.
View 7 Replies
View Related
Jan 8, 2010
I can telnet mx1.hotmail.com 25 from all other machines, apart from my newly installed ubuntu 9.10 laptop. I just installed exim4 and mailx and set in /etc/exim4/update-exim4.conf.conf: dc_eximconfig_configtype='internet' But I can't send mail cause telnet mx1.hotmail.com 25 doesn't work. I can ping mx1.hotmail.com just fine.
View 2 Replies
View Related
Jan 4, 2010
i have a acer 8930g laptop with mint 7 installed can't get sound to work. found my way round the nvidia graphics to get the screen to work but lost when it came to get the pc speakers and sound card to worki have set the preferences to auto detect but at a loss as to the logical steps i need to take.
View 2 Replies
View Related
Dec 4, 2010
I have a Lenovo T500 laptop with 4 GB RAM. I have installed Windows 7 64bits OEM on my laptop HD. I also installed Fedora 14 on my USB External Hard Drive which it has it own boot sector. I don't want to have a dual boot. So if I plug in my external HD to my laptop and turns the machine on, it automatically my Fedora comes up, other wise my windows 7. (I set up start-up boot drive , first to USB External HD and then internal HD)
I installed KVM (Virtual Machine Manger) on my Fedora 14 and I am trying to install windows 7 64bits OEM on my Fedora 14 as Virtual Machine. After setting everything and start installing windows form CD, I got BLUE SCREEN right after "WINDOWS FILES LOADING..." finished. it shows me a blue screen and then it will stop
Questions:
1- How can I fix that problem?
2- Is ther way to make a Virtual Machine on my Fedora using my exiting installed windows 7 on my laptop HD?
View 2 Replies
View Related
Apr 13, 2010
I intend to learn Linux, i know the basic commands and i am a power user who came from windows and also learning C on a virtual machine ( using ubuntu) provided by the intro course ( URL.,, ) and through my reading in this forum/blogs most of the people said if you want to learn Linux go for slackware, so.... Question One: is it possible to install it on this laptop (Dell Inspiron 1545) by that i mean working sound/wireless/touchpad?
View 14 Replies
View Related
Aug 6, 2010
I have Aspire one 752 netbook with slack 13.1 installed. I installed laptop-mode-tools from slackbuilds to control power management and etc. I'd like to make sure that sda drive in netbook never spins off when not running on batteries. For now it seems to spin down after every half a minute and is producing clicking sounds. I issued 'hdparm -B 255 /dev/sda' which seemed to work - no clicks any more, and no spinning-up sounds. What is the right way to make this change to be applied whenever netbook is on AC power?Edit: Also, how to make this 'hdparm -B 255 /dev/sda' survive hibernate, as it reverts to '96' after being resumed:
# hdparm -B /dev/sda/dev/sda: APM_level = 96Edit2: Ok, i changed hdparm -B values from 254 to 255 in laptop-mode.conf, since values of 254 and any other i tried(1, 96, 128) gave ioctl errors and were not applied to drive.
Code:
# hdparm -B 96 /dev/sda
/dev/sda:
[code]....
View 3 Replies
View Related
May 31, 2010
The 2.6.33.4 kernel (using huge-smp) does not work for my laptop. It tries to boot, but after the line (Freeing init...) the screen goes blank. No logs since the filesystem is not yet mounted (I think). I've blogged about it already (posted it here, investigated myself, etc) for the previous versions of the kernel. I've been following every updates on -current and most of the thing works well except for the kernel. The kernel that works out of the box for my machine was 2.6.33. Previous kernel that works was 2.6.29.6. Then it went 2.6.33.1, 2.6.33.2 however, I need to compile using the config of 2.6.33 to make it work on .1 and .2. Now, I tried the same thing on 2.6.33.4 but some cryptic error occurred while loading the kernel.
That all were using huge-smp kernel. Now I tried to compile a generic-smp kernel (of course with initrd). (I did not install kernel modules yet). It works and it boots. However, since there are no kernel modules, it freezes after starting xfce at runlevel 3. So my guess is that somehow, my previous problems were either config related or module related. I though that if I will as well compile the kernel module, it may work, but as I look at source/k it seems that the source for kernel modules are coming the install package from slackware/a packages. Sorry, just a newbie.
View 10 Replies
View Related
Jul 26, 2011
I've got a Laptop with Intel video chipset. I've got a full slackware 13.37 installation and I'm using the huge-smp kernel all though it's not recommended. But I don't think the issue is kernel related. The problem is that it detects that there is a monitor connected to the s-video connector, but there is no picture on the screen. It doesn't matter what mode I use, but ideally I want cloning.
What happens when I use KDE and krandertray (or system-configuration for that matter) is that I can choose resolution and everything but no picture shows up on the TV. When I press the "Identify monitor" (Or something) button both the "1 TV1" and "2 LVDS1" shows up on the same monitor (laptop). That is weird.
Has anyone experienced anything similar or could point me in some direction as to what could be done?(I haven't had the chance to test modifications to xorg.conf quite yet, but I guess that should work. However, I think it's worth it to get rid of this bug)
View 7 Replies
View Related
Jun 8, 2011
I've been running a Dell Latitude D600 laptop on -current for a couple of months. After the last kernel update, I needed to switch to the non-SMP huge kernel due to lack of pae instructions.Since then, I've seen 2 complete lockups. They've both happened when it was sitting idle, and in both cases, Xfce is gone, and the console is spewing kernel messages faster than I can possibly read.
View 2 Replies
View Related
Aug 12, 2010
I got a new (used) Sony Vaio VGN-SZ440, I installed Slackware-current x86. Everything pretty much worked out of the box, including wireless. The only thing that is not working is my sound (It is not muted I already checked :-p). Here is my lspci output:
Code:
root@darkstar:~# lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
[Code].....
View 8 Replies
View Related
Nov 29, 2010
I have a laptop that I have installed Slack-current on, I am currently using the usb image to boot from. Windows7 is installed on sda2 and sda2 has been marked with the bootable flag, I would like to use lilo to boot the laptop do i install lilo to sda or to sda2?Will win7 still be able to boot using lilo as the boot loader ?
Another issue i noted during install is that the kernel panicked using the dvd to install with an error stating it could not read from the booting device, I eventually used the usb-pxe install to load the system however since 13.1 i have not been able to load a system using the dvd.
View 8 Replies
View Related
Jul 7, 2011
i've a optimus laptop and it isn't functioning as well as it could. I've been recommended to use the 2.6.39 kernel. Would there be any issues upgrading to this kernel since it's unsupported?
View 10 Replies
View Related
Oct 10, 2010
I want to make the audio available only on my headset and to turn the laptop speakers off. In windows, when i plug in the headphones, the speakers automatically turn off and audio is output only on the heads but that's not the case with slackware. I was looking in alsamixer and the audio and video configuration, but no success.
View 11 Replies
View Related
