I can telnet mx1.hotmail.com 25 from all other machines, apart from my newly installed ubuntu 9.10 laptop. I just installed exim4 and mailx and set in /etc/exim4/update-exim4.conf.conf: dc_eximconfig_configtype='internet' But I can't send mail cause telnet mx1.hotmail.com 25 doesn't work. I can ping mx1.hotmail.com just fine.
View 2 Replies
I've just installed ubuntu 9.10 on my laptop, and when I'm on vim, I can use arrow key normally in command mode, but in editing mode, if I use them, it print a letter, capital case + new line and doesn't move the cursor.
In putty I would try to play with the different type of keyboard settings (ESC[~, Linux, Xterm R6, VT400 etc...), but here, I don't know what to do.
At the installation time, I choose French/French keyboard.
Extra Question :
[URL]
It's said to have GRUB2 by default, but at boot time it says Grub 1.97 beta...
I finally got the driver to be installed and to be associated with the network adapter. Now the issue is the wireless network adapter won't connect to my wireless network. I am new to Linux, and am trying to get my Fedora 14 to work online, without needing to constantly be wired in (what's the point of having a laptop if you have to be stationary). Anyways my network has WPA2 personal security with a TKIP + AES encryption (I switched it from solely AES because I thought that might have been the issue).I've heard a lot of good things about Linux, but so far its been frustrating trying to get this wireless connection working. I am currently taking a course on Linux, and I am using the opportunity to learn about and maybe switch over to a Linux OS which I have heard so much good stuff about in my previous courses.
View 2 Replies View RelatedI am trying to get an internet connection on my newly-installed ubuntu computer.
i have tried <sudo apt-get install b43-fwcutter>. it responded <E: Unable to locate package b43-fwcutter>.
i then tried a <dmesg | grep -i firm>.
the it spat back at me.
[ 0.161805][Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.245165] pci 0000:05:08.0: Firmware left e100 interrupts enabled; disabling
[ 17.328521] Broadcom 43xx driver loaded [ Features: PNL, Firmware-ID: FW13 ]
[ 18.302783] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[Code]....
i read the instructions, but no downloads. and fast, too; caus if i don't set up my friends computer by sunday i dont get $50.
I am trying to find the difference between the above two services. Both are under xinetd and can someone please explain the difference between them (is one more secure than the other one?)
View 1 Replies View RelatedI have recently switched entirely to Ubuntu. I love Ubuntu and everything I need works fine, except the whole thing keeps crashing on a regular basis - screen goes black or white in a blink and totally hangs, requiring a hard reboot. How to starting trying to figure out what's happening? - I don't think it's hardware, as this laptop has worked fine with windows for a few years now. What sort of scans or checks can I do to investigate?
View 1 Replies View Relatedi cannot start a newly installed 11.04, i installed the boatloader into the root partition because i use another bootload called boot-us which start from its own partition, this worked fine with other ubuntu versions, but now i got the following errors after i try to start ubuntu with grub:
error no such device following a number
error no such disk
error you need to load the kernel first
when iam trying to use filezilla in a newly installed fedora 14,it shows a time out error. (when trying to connect to a server) my pxoxy properly working&i get internet connections, in my filewall ftp port is enabled. so what may be the issue now?
View 1 Replies View Relatedhow to identify freshly installed linux o/s
View 7 Replies View RelatedI've been trying to understand how Linux creates the network/interfaces on a machine (been reading the Linux admin guide), but as I'm pretty new to this subject, I've got lost in the forest.
To provide with my goal:
1.) Learn about network setups on Linux
2.) Be able to maintain my own (virtual) network
3.) Configure my (virtual) network
I recently decided to wipe my laptop using Dariks Boot and Nuke. This, of course irreversibly wipes out a hard drive. I downloaded 10.10 and burned to a CD and booted from cd, then this error comes up.
I have installed Ubuntu 10.10 on my laptop before. Then I had wiped it and put Windows 7 and now I wiped and want to install Ubuntu again.
I have just installed ImageMagick but it doesn't appear in the Applications Menu. I have rebooted. Does it require another app or GU
View 5 Replies View RelatedI'm playing with my hard drive partitions and trying out different O/S versions so I want Grub2 to be aware of them on its boot menu. Currently I'm using the maintainer's version of Grub2 that came with karmic. Do I have to do a re-install of Grub2 or is there a makefile I can use? Specific commands that I would need be nice.
View 5 Replies View RelatedI am a beginner Ubuntu 9.10 user. I downloaded and installed the latest version of the sun VirtualBox. My problem is I cannot find where it is installed and that's why I could not run it. Generally, when I install a program the shortcut appears in the menu "Applications->ClassOfInstalledFile". But Virtual Box did not appear. How to find the icon, or simply how to run this application and have a shortcut of it on the "Applications" menu?
View 1 Replies View RelatedA friend installed QCad. All seemed well but he cannot find the app in the Applications menu under any category. Strange thing is, the Software Centre shows that it is installed. How can he run it if it does not appear in the Apps menu?n it be run from the command line?
View 4 Replies View RelatedI had a dual boot system (Ubuntu 10.04 and XP) and had a problem with my XP and had to reinstall it. Unfortunately I forgot to backup the boot file. After the re-installation of XP, I can't load Ubuntu 10.04 anymore, so I booted up Ubuntu 10.10 using USB, during the install, it didn't give an option to do a repair, so I did an install along with other OS. After the install, the GRUB showed now 3 OS:
Ubuntu 10.10
Win XP
Ubuntu 10.04
How can I remove the newly installed Ubuntu 10.10 without damaging the other OS? I'd like to keep the 10.04 because it's all customized and have several apps already installed.
I just installed ubuntu 11.04 on my PC from CD.I selected the option for it to run as dual boot with my windows xp (SP1 - don't laugh). I changed the boot priority order in BIOS to hard drive.The problem is the boot menu where i select the OS doesn't appear and I go directly into winXP. I have rebooted ubuntu from the disc and checked that all the ubuntu files are there and the drives are partitioned as set. So where is the boot menu?I notice the grub.cfg file refers to windows xp do need to change something here?
View 1 Replies View RelatedI have installed gcc-3.3 & g++-3.3 in ubuntu 9.04. Now I want to change the default compiler as gcc-3.3/g++-3.3. After creating links to newly installed gcc/g++, gcc works fine but g++ doesn't work.
When I give "$which gcc" or "$gcc --version" it works fine, but when I give "$which g++" it gives nothing and also "$g++ --version" it gives an error "the program 'g++' can be found in the following packages: * g++..." When I installed gcc I gave the command "$configure --perfix=/opt/gcc33 --program-suffix=33 --enable-languages=c,c++" . When I give "$which g++33" and "$g++33 --version", work fine.
I tried following:
$export CXX=g++33
$sudo ln -s g++-3.3 g++
Nothing happens. I am very new in Linux and I need to install ns2.1a9b in gcc-3.3.
have installed RHEL 5 recently and want to use internet on it. However it doesn't activate my connection when I try activating it through System>Administration>Network>Devices Tab.
My network adapter is "Realtek RTL8139/810x Family Fast Ethernet NIC", and processor is Intel Core 2 Duo. I read in a thread somewhere to edit a file named resolv.conf to include DNS server address, but don't know how to go about it exactly. I asked my ISP and he gave me two DNS Ip addresses
I am trying to use the ksctp on CentOS 5 newly installed machine. However, I am not able to find some files (/usr/include/netinet/sctp/h, libsctp.so etc.,) that are required for compiling my application.
View 1 Replies View RelatedI installed fedora 12 very recently after which I installed a few files. I don't know where these files get installed. Is there a default location for newly installed files?
If there is one, is it possible to change the location?
I have just installed OPENSUSE 11.3 (32 bit) on a pc. I am brand new to OPENSUSE. I have connected a network cable from a router that previously connected a Windows XP machine to a home wired network/internet connection. The computer shows network connectivity, but when I launch Firefox it cannot find the OPENSUSE URL or any other such as my ISP. Do I need to install or activate some LINUX application to make the OPENSUSE system see the network /internet connection? I can't seem to find any application in the basic OPENSUSE installation that addresses this. Is there some kind of firewall that needs to be dealt with?
View 3 Replies View RelatedSo I just had gotten to know the old Grub a little when I upgraded Ubuntu to find the new Grub, which I barely understand at all! My use of Ubuntu is mostly for learning and recreational as my bread and butter is working on people's messed up Windoze systems, since that is where the work is. Naturally I've got to use and work with Windoze to know how to fix it and keep it running cleanly, but Ubuntu was the first Linux I found that to me seems like something that could be potentially be embraced by "non geeks". I have as yet to get anyone to try it; it is all about keeping up with the Joneses and having what they have. There is also that old pervasive myth that you get what you pay for, which with computers, I find the opposite is so often true, that the good stuff is mostly free.
In any case I dabble a lot with Ubuntu for fun and personal knowledge, but since I put 10 on I had only Windoze 7 on my machine at the time. It picked it up and I purposely installed Grub to my Ubuntu drive (I used separate physical drives, so that if you removed the Ubuntu drive, 7 would boot as if Grub and Linux were never on the machine and that is the way I like it since I tinker a lot.). The trouble is that I need Win 7 to be the default and I don't know how to do that with Grub 2 (is it 2?) I used to know with the old one. Also, I have since added a 160GB PATA drive with XP on it, since so much of the help I am asked to give over the phone is with XP and I am not one who can talk others through things unless I can see it myself. Plus there are some things I do that just plain old work best with XP. So I also need to add XP to my boot menu, and it is, on a separate physical drive as well, and I wanted that the same too; if you made the XP drive the priority boot device it will boot XP as if it was the only OS on the machine.
What the ideal for me would be is to have the Ubuntu drive as the one it boots from, Windoze 7 to be the default OS, and XP to be on the menu too. I have been able in all of the time with Ubuntu and Linux in general to find precious little info on how to do things with multiple physical drives. It seems to be taken for granted that the only way people multi boot is with separate partitions on a single physical drive
i recently installed a few games via the Synaptic Package Manager on Ubuntu but they aren't in the Applications->Games menu when i click on it
View 7 Replies View RelatedI am trying to install RSYNC to my newly installed Debian (Booting from SD). I ran the command apt-get install rsync and I got the following error WARNING: This version of glibc requires that you be running kernel version 2.6.12 or later. Earlier kernels contained bugs that may render the system unusable if a modern version of glibc is installed. The installation of a 2.6 kernel _could_ ask you to install a new libc first, this is NOT a bug, and should *NOT* be reported. In that case, please add etch sources to your /etc/apt/sources.list and run: apt-get install -t etch linux-image-2.6 Then reboot into this new kernel, and proceed with your upgrade dpkg: error processing /var/cache/apt/archives/libc6_2.7-18lenny1_arm.deb(--unpack): subprocess pre-installation script returned error exit status 1 INIT: version 2.86 reloading Errors were encountered while processing: /var/cache/apt/archives/libc6_2.7-18lenny1_arm.deb E: Sub-process /usr/bin/dpkg returned an error code (1) When I ran uname and I found out the kernal version of my debian is 2.4.26. Then I ran apt-get install -t etch linux-image-2.6, and I get the error
Reading Package Lists... Done
Building Dependency Tree... Done
Package linux-image-2.6 is a virtual package provided by:
linux-image-2.6.26-2-orion5x 2.6.26-21
[Code]...
I have just installed fedora 13 onto my old PC. Everything is great apart from the fact that i cannot access the internet. My isp is TalkTalk, they do not support linux, and have suggested that i contact the Geek squad who might be able to help me for the princely sum of �30. i think that all that i need is the ip address for my Isp or something equally simple and my problem will be solved. failure to resolve this issue means that i might have to go back to windows.
The machinery that i have is an emachines 3210, 2.70 GHz, a Dlink wireless router, i am using a cat 5 cable plugged directly into the back of the pc, i am using fedora 13. ps my son is using windows and is connected to the internet still via WiFi.
How can I add KDE desktop environment in newly installed 'moonOS-3'.
View 2 Replies View RelatedFor every program I've installed, I can see an icon in the applications menu. But, I'd like to be able to find the actual icon so I can use it on panels and such in gnome.
Is there a standard place where icons from the applications menu are found?
I installed an Oracle-provided RPM that installs a library, let's call it libUSEME1.0, into /usr/lib/oracle/yada/yada2/libUSEME.1.0. I then have an RPM (perl-DBD-Oracle) that depends on libraries from the Oracle-provided RPM. (For now, let's say it depends on libUSEME.1.0)
I then try to do both a 'rpm -ivh' and a 'yum localinstall', on that perl-DBD-Oracle RPM. However, yum still complains that this dependency is missing. The only semi-useful post I could find from Google shows that setting things like LD_PRELOAD won't change yum's mind - it still says the dependency is missing.
What is the proper way to demonstrate to yum that you have already installed a library on which an rpm (or package) depends?
I have installed SUSE yesterday.Everything has been fine except two.1. I can't access my hard disk drives. It says it need to install online some software for it but it can't.I am attaching a screen shot of the error I encounter.2. I have Ubuntu installed in another disk drive but in the Grub menu there in no option to boot to Ubuntu OS.How should I change the text in 'menu.lst' to solve the problem?
View 6 Replies View Related
