My HP Laserjet P1007 not functioning. I am using Linux Mint 9. As per the advise from linux Questions/Answer I deleted "server.crt" and "server.key" from ssl directory, and reinstalled by using "sudo /etc/init.d/cups start" command. Still my printer not working.
View 1 RepliesMy HP Laserjet P1007 is not working with BOSS GNU
View 1 Replies View RelatedI tried to install HP laserjet P1007 printer in my fedora 8 desktop. I followed these instructions:
yum -y install gcc*
wget -O foo2zjs.tar.gz [URL]
tar zxvf foo2zjs.tar.gz
cd foo2zjs
[root@arnab~]# make
[root@arnab~]# make install
[root@arnab~]# make install-hotplug
$ ./getweb 1005
$ ./getweb 1006
$ ./getweb 1007
$ ./getweb 1008
system-config-printer
Then I found the printer and add it. But the problem is when I tried to try to print a test page, it shows "job1 submitted".....that's all. No page gets printed. If I try once more, it shows "job2 submitted" but again no results. I cant also see all the submitted jobs.
i recently installed fedora 14 xfce and i have a printer laserjet p1007 hp connected. the printer gets detected but there is an error while installation (i.e when i run hp-setup) it gives an error that some binary drivers missing. i refreshed the package list also. but still the driver does not get installed..
View 1 Replies View RelatedCan Ubuntu One be used in Linux Mint or other distros? Also, can the Ubuntu music store be accessed from distros other than Ubuntu?
View 1 Replies View RelatedThis is my second day of using Linux Mint and I have bunch of questions. Let's start with this one. I tried to play dvd movie yesterday night. I put disc in drive. And nothing happened. Like it's not in there. So I tried to double click (I'm old Windows user trying to learn new stuff) on cd/dvd disc in computer. It's unresponsive. I try right click run with application some kind of movie player. It says 'Could not open location. You might not have permission to open the file'.So I installed VLC and did the same thing but same message appears.So I look at google for the answer and didn't find much. And I was tired and went to sleep.
Today I wake up, turn on my laptop and surprise, surprise! There is some icon on my desktop saying 'Name of the show' (that was the dvd I was trying to open). So I double click it and there are all episodes. And I can now browse it and play any episode I want. So I say, 'hey, there must be something if I eject this dvd, and put it in again, I would have same problem as last night'. And I have. And problem is back. Now I cant play anything again.
I've recently installed x64 Linux Mint 11, basically Ubuntu Natty. Since the install I've found that 32-bit applications which used to run on my Ubuntu system are rejected by my Mint 11 system. When I use the 'file' utility to check the binary, it correctly identifies it as a 32-bit elf, but I can't invoke the application. I've tried starting it from bash and os.system a la python, to no avail, so I suspect that it must have something to do with 32-bit binary compatibility mode but my knowledge of that sub-system and how to enable it is limited, can anyone assist?
View 2 Replies View RelatedI recently installed Linux Mint Julia 10 on my netbook and it is great.no issues from USB install.My question is what is a smaller distro I can use for netbook...and will it install as easy as Mint 10.I only use netbook for emails and web searches for information..I have no harware issues ..except for my lack of knowledge of Linux.
View 14 Replies View RelatedMy card Wifi network doesn't turn on, even at loading configuration of the system is failed. I have to wait a long time until the system itself to load.
And when I write ifconfig or iwconfig is displayed in the console interface wireless card.
And when I come in the panel on the network card, it immediately pops up a window that you can not load the network card modules.
I don't know what could have happened, I do not recall that I recently messed with the system.
Here are the pictures: [URL]....
And here I join dmesg.log file, at the end of a failed: [URL] ....
I have linux mint 17 quiana cinnamon
My printer is a HP laserjet 4 Plus. It used to work with the gutenprint drivers pretty much since always.I don't know when it broke, because I don't use it that often. I have tried with the generic postscript driver, with the gutenprint driver, with the j4dith driver and with the hplib driver. Basically, what happens is that all jobs never finish processing in the queue. On the other hand cups-pdf still works.
View 14 Replies View RelatedI have a hp officejet on my fedora 13 pc. I tried to configure it as a network printer. I disabled selinux and then i opend the door in the firewall.. the printer is seen in the network but when I try to print from a client it says "printer description not available" . I disabled then firewall both on server and on client. then rebooted both. but no luck. the printer is available on the network but it prints only from the server.
View 2 Replies View RelatedWhenever I send a document to print on my USB Printer, as mentioned in title, it just sits and waits and after a minute or so the hp-toolbox resturns this error.
Status: Printer queue stopped Code: 700
Status: Device Communication Error Code: 5012
I know my printer is OK since I print with it on my Windows machine.
I used to run Linux Mint GNOME on my laptop. There was never a problem. I'd connect my Desktop wireless adapter to it and then install the broadcom drivers with ease.
Today I decided to give KDE a try so I installed Linux Mint 9 KDE. All is fine except for the wireless drivers. I get this message in 'Hardware Drivers' window "Sorry, installation of this driver failed. Please have a look at the log file for details: /var/log/jockey.log".
I have noticed that there are not as many Servers available in LM KDE as there are in Ubuntu. Could this be the problem? The drivers are actually not available to download?
I have a network at home which is bridged with a WLI-TX4-G54HP.On the bridged segment there are 3 computers and a NAS, All the computers run Ubuntu 10.10 and have been happily working with this and other earlier versions of Ubuntu for a long time. I have just upgraded one of my machines (TEST) to Ubuntu 11.04 and have encountered a strange problem.The bridged section is connected via the Buffalo WLI-TX4-G54HP ethernet converter which in turn connects to the rest of the network through my wireless router a Buffalo WBMR-G300N.
Now after the upgrade the test machine had an IP address which it must have got from the via DHCP. but the test system will not connect across the bridge. I can ping anything this side of the bridge but cannot ping devices on the other side, including the gateway and vice versa. The other non upgraded PCs will ping across the bridge I tried to install Mint 10 and got exactly the same behaviour. I then got out my very long CAT5 cable and ran it from the switch directly to the wireless router and it works perfectly, this seems to me a perfectly valid work around, however, STMBO for some reason does not. (which is why the lan was bridged in the first place).
I am trying Linux with the mint cd rom install. I have two hard drives and bootit ng on hdo, with windows xp. I installed mint the first time on hd1 using the install cd. When I booted up I could run the linux but not the windows. I reinstalled bootit ng but had not luck. I reinstalled Linux again and this time tried to get it to install grub on a certain partition but still no luck. I reinstalled it again and this time disconnected hd0 and it worked again and I could run the linux with no problem. But when I connect hd0 I can boot windows but not linux. Bootit sees the other hard drive and can see all the partitions on it but every time I try to boot it just says the partition is not bootable.
I have fiddled with various settings and tried setting the embr and hard drive swap but nothing works. Bootit web site had some help pages that said to run grub from a bootable cd and then type grub> find /boot/grub/stage1. I have tried this but always get error code 15 file not found. grub> find /grub/stage1 same thing I install mint using the following partitions. /boot is about 300 megs. / is about 3 gigs and /home is 8 gigs and /swap is 1 gig. I feel that if some knew bootit ng then they could tell me what to do in five minutes. The hard drive is there and recognized and the partitions are there the system works but I just can not boot to it with out disconnecting the one hard drive
I activated my graphics card on Linux Mint which is Nvidia GEFORCE GT 130M. Now when I boot up, after bios the loading screen looks like in the picture (sorry its crappy quality). When it gets to the login screen and afterwards it is just blank, but i can tell its running underneath because i can shut down by doing ctrl alt backspace and then tab and enter. I tried entering recovery mode but it was the same. Atm im using a live cd.
View 2 Replies View RelatedGot my cheap wireless adapter to work simply by doing this & nothing else.
[Code]...
I have what seems to be an incomplete or incompletely configured configuration of SCIM on my Netbook running Linux Mint(Gloria).To tell the truth, I am not even sure SCIM is the best choice, since I see claims (in LQ forums) that SCIM has been discontinued, and I cannot connect to the SCIM website.So what I want to do is get SOME Japanese Input Method working under this installation of Gloria, for now, I presume SCIM is the right choice for its front end. But I am certainly open to other suggestions.But I must shrink from the idea of installing language support for all languages, which is what Control Center>Language Support seems to threaten to do: it is only a Netbook, I can't afford to waste that much space.
what I see is the above Control Center option, and one other that must be relevant: ControlCenter>SCIM Input MethodSetup. But I don't see any documentation for this, and the menu item names are vaguely suggestive of their functions, not descriptive. So I am quite unsure which of them I need to use to get it working. Is it true, for example, that SCIM itself does not include the Input Methods? I have to download a Japanese IME from somewhere else? Which one? Is that what Control Center>Language Support will do? What DO they mean by "Front end module"? Why does SCIM only recognize an English keyboard layout and a "RAW CODE" (in IM Engine Global Setup)? have Greek and Russian layouts enabled on this machine, too.So now that you have a pretty good idea how disorienting I find the current situation, please point me to something that will clear up the confusion and possibly even give a list of step-by-step directions for getting a Japanese IME working on this machine.
I loaded Linux Mint 7, Gloria, on an Emachine with a 120 gb HD, with 512K ram, dual booted with windows Vista. Re-partitioned the HD into 2 equal portions of 60gb, with 58gb for Mint and 2gb for swap. Got online and got all (>200) updates for Mint 7 Gloria. Mint comes up fine, but if I go to Menu>Computer (file-browser), nothing I click on works. No files will open, (clicking on the little triangles does not open that file).and I can't even close that "page" with the x-box in the upper right hand corner. Any thoughts? A friend thinks is could be the amount of memory (512) and says I should use Ubuntu because it requires less.
View 4 Replies View RelatedI am running Linux Mint 8. I try playing a video file.t plays but there is no audio and the ,movie player acts as if there was. How can I correct this
View 2 Replies View RelatedI am brand new to linux and i am finding it really frustrating cause i always thought i had quite a knack for computers. ive looked online and searched a bunch of stuff but because im so new to linux i am having a hard time even understand some of the stuff. i really want to get comfortable/fluent with linux and unix and what not.
My netbook model is HP Compaq Mini 110 the distribution i am using is Linux Mint 10
My broadcom wifi device isnt working or something.
When i first installed mint, it said that i needed non-free drivers?
The ethernet cable instantly gave me connection and i was able to run updates but the wifi still doesnt work i think the updates only updated the free ones and not the non-free ones cause i dont remember ever specifying to download the non free ones how do i manually specify to download all available updates?
I also typed:
The output says:
Also when i right click on the little network sign on the bottom right corner, then it says "Wireless Networks device not read (firmware missing)"
I am currently dual booting between Linux Mint 10, and Windows Vista SP2. Wireless works fine in both these OSes, but when I quit Mint and load Windows, 70% of the time my wireless stops working.
ie, it does not detect any wireless networks nearby, althought there are tons of them.
Restarting the wireless device doesnt help, I have to restart my computer at least 4 times for wireless to start working again.
And as of now, my wireless in Linux Mint has stopped working.
I have noticed that ubuntu 9.10 (but also other distro and in general those that configure the network automatically at startup) crashed if my pc boot directly with a linux kernel at power on.This does not happen if the first boot is done with windows xp and then rebooting the pc and choosing the same linux kernel.Some distro (for example SysrescueCD) that does not configure the network at startup can work but also with these if I try to configure the network using the command ifconfig eth0 the system crashes.My network card is a SiS191 Ethernet and linux recognized it using sis190 module.I suppose that something happen during the first power on, some inizialization done with windows xp but does not done with linux in fact after a reboot made from windows xp without shutdown the pc, with Linux I can configure the network using ifconfig without crash.
Any ideas to solve this without have to boot always windows as first?
I am using 2 VPS machines on VMware workstation.The older one is Debian 5.0 ( Lenny ) and I have successfully installed Static IP to networking and it works fineithout any problems.I just installed another Debian 5.0.6 ( Latest ) Lenny and installed another static IP. It's partially working and partially not. When I ping the server, the ping is successful but if I try to SSH, it says Connection refused and even if I tro use the net through the machine, it doesn't work and host name lookups fail. What could be the issue
View 3 Replies View RelatedI've found that my skype stopped working with recent -current updates ( around beta ... ). It was looking for a libuuid.so.1 library - on checking I found the 64-bit version but no 32-bit version - quite strange as this has been working fine since my original slackware64 13.0 installation. Anyhow, I got the 32-bit util-linux package, did the 32-bit package convert thing and skype is now working:
1. convertpkg-compat32 -i util-linux-ng-2.17.2-i486-1.txz
2. un-archive
3. copy the libuuid lib to /lib and soft-link in /usr/lib
I didn't install the whole compat package as this is not really necessary I think.
if anyone of you have shifted using Paid Red Hat Linux with CentOS, and what are your experiences of moving from Paid Linux to Unpaid Linux CenOS. When do you suggest a person use Paid Linux and when to use Unpaid Linux?
View 1 Replies View RelatedI have learnt that the network locked huawei modems may be unlocked to use any sim card bu getting a special unlock code and it should ask for it when a "foreign" SIM card is inserted. This procedure works well in Windows, but in Linux where I use wvdial, I dont get prompted for this unlock code. Does anyone know how to insert the unlock code in Linux using any Linux tool (GAMMU/GNOKII/Minicom etc)?
View 2 Replies View Relatedi would just like to verify that the command
lspci would show the FC adapter installed
is there any other command that i can use to verify the FC adapter is being installed
I want to Migrate my C++ Application from SuSE Linux to Red Hat Linux.What impact analysis i should do?
View 3 Replies View RelatedI started to install Fedora thinking I was just going to place it in the / and /home partitions I already have but the installer only seems to give me the option to use the whole disk.I have 3 / and 3 /home partitions 2 of each are occupied by Linux Mint and Mint KDE so I wanted to use the last / and /home for Fedora.
View 6 Replies View Related