Networking :: Linux Static IP Configured Not Working Properly?
Oct 30, 2010
I am using 2 VPS machines on VMware workstation.The older one is Debian 5.0 ( Lenny ) and I have successfully installed Static IP to networking and it works fineithout any problems.I just installed another Debian 5.0.6 ( Latest ) Lenny and installed another static IP. It's partially working and partially not. When I ping the server, the ping is successful but if I try to SSH, it says Connection refused and even if I tro use the net through the machine, it doesn't work and host name lookups fail. What could be the issue
View 3 Replies
ADVERTISEMENT
Dec 16, 2010
Version 10.04 LTS. Installed desktop version and network worked but I needed a static IP address and the install configures for a DHCP configured address. I tried changing to static address using the System->Preferences->Network Connections application but was unable to get the system to come up with the network up.
So I manually modified the /etc/network/interfaces and the /etc/resolv.conf files. I restart the system but when I do an ifconfig, I don't see a configured IP address on eth0 (only the loopback address). If I run /sbin/ifup eth0 everything then works fine and ifconfig shows the correct address bound to eth0.
My files are as follows:
View 2 Replies
View Related
Jun 15, 2010
v10.4 {I have completely re-edited this thread because I have started over fresh. I am no longer using bind9, but now using the installation-defaults nameserver and dhcp and trying to get a handle on how things ought to be setup properly. My previous attempts was a disaster.}
Coming fresh out of a newly installed 10.4, I obviously was able to get network connectivity but then I ran into trouble the minute that I tried to change eth0/eth1 connections via network-manager's applet. What I found was, that when I attempted to define static connections, all bets were off. It seems that once one attempts to change eth0/eth1 which are wired devices, I was no longer able to recover my network connectivity!
I was however able to setup a wireless connection, so in this way I was able to get back network (and Internet) connectivity, and write this thread on this forum. I notice also, that there is no longer 'Networks' in the System->Administration menus! Geez, what the hell is going on? how to properly configure my static wired connection? Networks in 10.4 have really changed alot!
View 2 Replies
View Related
Jan 17, 2011
I have configured bridging based on information from a few web pages Google found. Traffic is being seen (using tcpdump) on both interfaces that are configured. However, the traffic is not going between them. What could be missing?The bridging machine has 3 NICS: eth0, eth1, eth2. eth0 is configured normally with an IP address (I can login via ssh to it just fine). The bridge is named br0 and uses eth1 and eth2 (a dual NIC card for convenience identifying which NICs are the bridge).
A script executes these commands:
Code:
bash-4.1# /etc/rc.d/rc.bridge-up br0 eth1 eth2
EXECUTING brctl addbr br0
[code]...
View 6 Replies
View Related
Aug 6, 2010
Yesterday, I tried to get two monitors working by editing xorg.conf. When it failed, I tried using my old xorg.conf, but that didn't work either. dpkg-reconfigure xserver-xorg did not work (it literally did nothing). Uninstalling and re-installing xserver-xorg did not work.So now I have zero working monitors instead of two. Xorg.0.log says something about "Screen was found, but doesn't work with existing setup." Anyway, I am less concern with the specific problem I am having than with the general way to fix problems with X. I read somewhere that dpkg-reconfigure xserver-xorg doesn't work anymore, but I haven't figured out what I'm supposed to use in place of it when X won't start.
View 14 Replies
View Related
Dec 21, 2010
I'm currently trying to get my wireless card to work with ndiswrapper after installing backtrack4 today, BUT.When I try and use the make command it tells me that some or another file is missing. I've checked and the output is right, There is no file of that name but there is neither a folder of that name.
Code:
root@bt:/usr/src/ndiswrapper-1.56/ndiswrapper-1.56# make
make -C driver
make[1]: Entering directory `/usr/src/ndiswrapper-1.56/ndiswrapper-1.56/driver'
[code]....
View 5 Replies
View Related
Feb 20, 2010
I need a linux distro who provides the following:1) Has an partitioner who can resize fat , ntfs ,ext* , .....filesystems.2) Has an excellent hardware support3) The installer can install console or graphic mode 4) The updating can be done via console5) In console can be configured internet via: static IP , DHCP , PPPOE and preferably to have support for USB modems.
View 8 Replies
View Related
Jun 21, 2011
I'm currently trying to setup a static IP address for my computer, but everytime I set the static IP my network does not works.
My lspci -v shows the follow.
Code:
Ethernet controller 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
Subsystem: Micro-Star International Co., Ltd. Device 7529
[Code].....
Even after restart the system my network only works when I use dhpc to resolve my IP Address.
View 6 Replies
View Related
Mar 20, 2010
Alright I just installed Linux as the only and got it all set up but now I have a problem with firefox or actually any browser. As far as I understand my internet works fine, I was able to download updates from the software center and various programs too. My problem is that when I try to go to any other website than google the browser just freezes up. The bar in the left bottom corner just says "Waiting for <site name>" Strangely google and google mail works. Ive tried going through all of the network settings but I am at a loss now
View 5 Replies
View Related
Nov 16, 2010
Moving back to 10.04, I've been trying for DAYS to get my wifi working properly. I've been scouring the boards trying everything under the sun,including attempting to install a new kernal, also a complete wipe/reinstall. I hope I have better luck with 10.04 or I'm ringing the bell on Ubuntu all together.
View 4 Replies
View Related
Apr 13, 2011
I just installed Ubuntu 10.10 tryed 11.04 but didn't work, but in both my internet connection was a lot slower than it is on windows. I can connect to the wifi but i get 1/10 of the speed that i usually do and it keeps losing the connection. I'm using a MSI computer with a "802.11bgn 1T1R mini Card Wireless Adapter"
View 9 Replies
View Related
Dec 16, 2010
How can i check my FTP is working properly or not? or check out this connectivity?
View 3 Replies
View Related
Jan 16, 2011
I had made following entries in my httpd.conf file at centos5.5.
###########################
Listen 80
Listen 8080
Listen 8085[code]....
When i am trying to access the any directory other on port *80, its not being accessible from the static ip which is routed through a DMZ server. http://122.165.35.9:8085 something like this returns the error "could not connect to web browser"
View 3 Replies
View Related
Jan 27, 2011
I have a dual boot (XP Pro and F13) laptop. This laptop has a Ralink RT2501USB Wireless Adapter which works perfectly fine on XP. But when it comes to F13, adapter only works properly when I am physically next to my router. When I move few feet away the strength of the connection drops from 100% to around 40%. But even though 40% should be okay for slow connection to internet, I can't get any internet access at all. I have tried three different routers with same results on each.
When I boot same machine with windows XP, all works fine. I can move to any part of my house and I will still have the connection without any issues.I can see that RT73 driver is installed if I check in add remove program under system.I am not an expert but to me its seems that the drivers on F13 for RT2501USB are not as good as on windows?
View 2 Replies
View Related
Apr 18, 2010
I have just recently installed Ubuntu karmic on one of my machines. The network worked perfectly until today, when it just wont connect. I have double checked that the SSID and Password are correct. It is a WPA network. I am sure it is a problem with my computer, not the network, because my brother's laptop (which I am using right now) has ubuntu 9.10 installed on it and the network is working perfectly.
View 4 Replies
View Related
Sep 12, 2010
I use Ubuntu 10.04. Last night, I installed the most recent updates for this istribution, and before I shut off my laptop, my internet was working smoothly. However, today my Internet connection is behaving very strange. When I try to connect to the internet, my browser times out or cannot establish a connection. I'm able to connect to low-input sites like Google search, but I cannot connect to sites like Facebook, Wikipedia, or even the Ubuntu forums (I'm currently using a friend's laptop to post this). Pidgin and Skype work without a problem, as well as Transmission. I primarily use Firefox, but I also tried Chrome, Opera, and Epiphany; none of them worked. Oddly enough, my update manager also cannot connect to the Internet to retrieve updates.
I have restarted my router, but it still works properly, as it is running fine on my friend's laptop. I have tried 'no proxy' in Firefox, but it did not help. I also disabled IPv6 in etc/sysctl.conf by adding the code:
#disable ipv6
net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.default.disable_ipv6 = 1
[code]....
View 9 Replies
View Related
Jun 21, 2010
Am using rhel5 server, in my server cbq time check was not working properly am using this cmd TIME=18:00-6:00;300Kbit/25Kbit,
View 1 Replies
View Related
Jun 24, 2011
I have a brand new Lenovo Thinkpad T402i. A very good and expensive machine, however I have just installed the latest Fedora 15 and my wiresless does not seem to work properly, I can barely ping a website. I have read it's an Intel's bug. I cannot understand how can be possible with Intel...
View 6 Replies
View Related
May 10, 2010
It's been a few hours since the Adobe Flash plugin on my Firefox is behaving in a strange way: some of the clickable dialogs do not work anymore. I click on them but nothing happens.
For example: in chatroulette, the dialog that asks for the permission to use the webcam can't be clicked:
Same happens for other flash sites.
I'm using Firefox "Namoroka" v3.6.5pre and Flash 10.0r45
View 5 Replies
View Related
Jun 23, 2010
Ok so I've been all over Google trying to find an answer as to why my MPD server won't properly output over httpd. When I try to connect to it from any source, it gives me a "404:Entity Not Found" error. There hasn't been any useful info out there to solve this problem. Help please! Attached is my mpd.conf file. All my permissions and firewalls are set up properly AFAIK.
View 5 Replies
View Related
Mar 16, 2010
I tried troubleshooting this on the Ubuntu forums, but my thread went nowhere, so here I am! I'm REALLY hoping someone can help, because this is immensely frustrating.I just moved to a new house, with a new ISP. All of a sudden, all the machines running Ubuntu (there are 4 of them on my network) are having trouble rendering websites properly. Some websites are perfectly fine; some render with things missing (e.g., no photos or no CSS); some render as text-only; and some won't display at all - I get a "server not found" error.If I boot into Windows on any of these machines, there's no problem.To complicate matters more: Sometimes the "server not found" sites will decide to connect, then they'll fail again. This has been changing day to day (sometimes even hour to hour). Anything within the google.com domain is a good example of this.Two of the affected machines are desktops (one running headless as a server), and two are laptops. All four are running Ubuntu, but they're all running different kernels. The ONLY things these machines have in common is that they're running Ubuntu, and they're all connecting to the internet wirelessly.
Because things work properly in Windows without exception, and because (at least on the laptops) things work fine in Ubuntu on any other internet connection, I can rule out wireless network adapters. I have tried using two different wireless routers - no change. I have tried using 4 different web browsers - no change. I have tried plugging a laptop directly into the incoming connection, bypassing the router entirely - no change. I have tried purging and reinstalling Flash on one of the laptops - no change. I have tried to connect to affected websites using their IP addresses to rule out DNS issues - no change.This one has me completely stumped. The only thing I can think is that this is something to do with my ISP, but I can't imagine what it would be. I called the guy who runs the ISP (it's a local outfit run by one or two guys, as I'm living in the middle of nowhere), and he said there's nothing he's aware of at the ISP level that would be causing a problem like this.
View 14 Replies
View Related
Oct 24, 2010
I did a fresh install of Ubuntu 10.10, coming from 10.04 and the wired network connection sometimes works, and sometimes doesn't. Right now I manually removed current network from System-->Preferences--> network connections, define a new one, and reboot. This usually fixes, although I've had to do this two times in the past.
Other general info
Ubuntu 10.10 64bit, EVGA P55 motherboard, on board either net.
View 1 Replies
View Related
Apr 26, 2010
I got this message on Friday from just one domain. uote:mailsrv.forthnet.gr #<mailsrv.forthnet.gr #5.5.0 smtp; 554 5.5.0 Your message was considered to be spam by the FORTHnet Antispamming Policy and was not delivered to the recipient. The following spam tests returned positive for this message:FORGED_RCVD_HELO,RCVD_IN_BRBL. For further information visitWe are not a spamming community but it seems we have a statice IP address that has a Reverse lookup to "myipaddress.static.lyse.net" and not my email domain. Would setting a cname mail.mydomain.no -> myipaddress.static.lyse.net cure this problem or are there more tricks to be performedOnce I have cured the FORGED_RCVD_HELO I can move to getting the IP removed from BARACUDA.
View 2 Replies
View Related
Mar 12, 2010
I am unable to ssh a Linux box from other Linux boxes; also tried to window putty.Although I am getting the password prompt instantaneously.So far, by comparing logs of other server, I am just able figure out that "debug2: callback start" is not coming in ssh -vvv logs.
View 2 Replies
View Related
Jul 15, 2011
I've tried everything that I could find on google, and nothing is working. Whenever I try to play anything in rhythmbox, the song doesn't playand an "x" shows up next to the song title. When you click on the "x" it says,Code:Configured audiosink bin1 is not working.Here's what lspci says:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx)
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
[code]...
View 3 Replies
View Related
Jun 23, 2010
while checking out open office i noticed something strange. while the "copy" shortcut command seems to be disabled / unalloted , it does work in practice !i noticed in keyboard shortcuts that there is no command alloted with the Ctrl + C combination. this i saw from both the "shortcuts" and the "functions" menus in customize.
View 1 Replies
View Related
Apr 25, 2011
I had a problem with apache2 and getting .htaccess working. I have done some things and i believe its working the ErrorDocument command is anyway. I believe there may be some problems with the rewrites though.Im trying to take a urlhttp://localhost/showthread/123and make it display whats on http://localhost/index.php?showthread=123The rewrite rule is Quote:
Options +FollowSymLinks
RewriteEngine on
RewriteRule ^showthread/([^/.]+)/?$ index.php?showthread=$1 [L]
[code]....
View 8 Replies
View Related
Aug 10, 2010
Just installed the LXDE spin of 13 onto my acer aspire netbook. Couldn't make a usb boot stick, finally succeeded with an external card reader and unetbootin. Anyway, GXine isn't working, though it says its configured correctly. I'm very new to fedora and linux in general, played a bit with ubuntu 9.10.
View 4 Replies
View Related
Nov 27, 2009
I want to configure linux CentOS 5 as a router using iptable, .Im new in linux so I need the steps to do that
View 5 Replies
View Related
Jun 29, 2011
Using Unity in Ubuntu 11.04,
OK I've figured out to to set up a VPN, by clicking on the Networking Icon and clicking VPN Connections->Configure VPN and setting up the details... but how to I actually USE the VPN I set up??? I thought it would appear in the VPN Connections but no the only things in there are Configure VPN and Disconnect VPN!
UPDATE: Nevermind.. I rebooted and it appeared in the VPN Connections as expected
View 6 Replies
View Related
