Hardware :: Fglrx Installation - "Cannot Stat <temporary Installation Directory>/.../libGL*"
May 26, 2011
I have installed the fglrx driver on my system (radeon hd 4830; asrock 4coredual sata2 rev. 2.0; Intel Pentium(R) Dual-Core CPU E6300 @ 2.80GHz; opensuse 11.3; 64 bit). Installation of fglrx seemed to be smooth, using the manual way, generation of rpm. part from the fact that there were 4 error messages like:
"Cannot stat <temporary intallation directory>/.../libGL*" "Cannot stat <temporary intallation directory>/.../libGLE*" and the related two cp commands failing. So, what does not work now: glxgears and fgl_glxgears hang after 2-3 seconds; so does full screen playback with flash player.
[Code]....
View 9 Replies
ADVERTISEMENT
Oct 5, 2010
I'm trying to backup every night a big directory (~2.5Gb) using tar+gzip.I'm calling tar like this:nice -n 19 tar --ignore-failed-read --exclude-tag-all=.kein-backup -Pczpsf '/backup/20100925233802f/archive.tar.gz' '/srv/products'And in 90% of the cases works just fine, in about 20 minutes is everything done. However, if it happens that in those minutes one file or folder from '/srv/products' gets deleted it reports me the following error:tar: /srv/products/prod14564.gif: Cannot stat: No such file or directorytar: Exiting with failure status due to previous errorsDoes it exist a parameter for tar to ignore this kind of errors? Is it there any other way to avoid these errors
View 3 Replies
View Related
May 26, 2010
I have a new ubuntu 10.04 amd64 installation (kernel 2.6.32-22) with a Mobility Radeon HD 3650. I tried to install the fglrx drivers from ati via the Software-Center and via apt-get. After installation, when starting the ATI CCC the following error message (sorry in german) appears:
[code]....
Translation: Driver is either not correctly installed or it does not work properly. If I try to execute fglrxinfo in the console I get a "segmentation fault". I think I do not have to say that the driver does not work. I have removed and reinstalled the driver several times.
View 4 Replies
View Related
Oct 23, 2010
So I have created a Bash script with the intent of the program to change the names of the files in a folder's subdirectory.The code recognises the individual subdirectories, then is able to enter into one and list the files individually, but when it tries to change their information it says;' cannot stat ' : ' No such file or directory 'As if it is looking in the directory that contains the Bash script, not its subdirectory.It is essentially saying, I see a file here called FILE but sorry, I can't change FILE because FILE doesn't exist. kweh?Is this something outside the capabilities of Bash? Am I asking too much of it? Can Bash only manipulate files that are in the same folder as the script?
Code:
#!/bin/bash
echo enter directory
[code]....
View 6 Replies
View Related
Dec 15, 2010
I am trying to install the nvidia-drivers from Slackbuilds.org. When I try to run the SlackBuild, I get the following error:
Code:
install: cannot stat `cuda.h': No such file or directory
What am I missing?
The nvidia-kernel SlackBuild ran fine and created the kernel package.
View 14 Replies
View Related
Jul 18, 2011
My pc (dell studio 15) needs to go to dell because i have some problems with my screen now i dont want that they see that i have also a dual boot windows and ubuntu so is it possible that i delete the grub boot screen so its going straight to Windows 7?
View 1 Replies
View Related
Mar 8, 2010
can you see below command i give return me error however it has been working fine before. there is 1 directory i want to make it .tar.gz [root@sa1 script]# tar cvzf /var/opt/bkup_axigen/axigen_bkup_2.tar.gz /var/opt/axigen/domain tar: Removing leading `/' from member names tar: /var/opt/axigen/domain: Cannot stat: No such file or directory tar: Error exit delayed from previous errors
View 2 Replies
View Related
Nov 6, 2010
Code: stuart@stuart:~/$cat showthread.php.html | grep -o [URL][^"< ]*" | uniq | head -n3 | plowdown - cannot stat '-': No such file or directory Code: stuart@stuart:~/$ awk NR==$x Musiclist.txt | cut -d/ -f6 | basename $1 .mp3 .mp3 Here's some system info on the bash i'm using:
[Code]...
View 13 Replies
View Related
Jan 30, 2010
This is what I get when following the instructions to fix grub. I type in "grub-install /dev/sda" and that's the error I get.I'm trying to put Ubuntu or Mint on a Dell Mini 9 with 16gb ssd, but no matter what I do I cannot achieve this goal
View 4 Replies
View Related
Nov 11, 2010
well I am a novice in Linux OS, I have a wireless card, it's a Linksys WUSB600N but it doesn't work in Ubuntu 10.10 Desktop Edition, which it is the one I have, 64 bits machine, so I read this [URL] and I did all the steps, I downloaded 2010_0915_RT3572_Linux_STA_v2.4.0.2.tar but in the last part, sudo make install I got this error
alain@alain:~/t/2010_0915_RT3572_Linux_STA_v2.4.0.2$ sudo make install
make -C /home/alain/t/2010_0915_RT3572_Linux_STA_v2.4.0.2/os/linux -f Makefile.6 install
mkdir: cannot create directory `/etc/Wireless': File exists
make[1]: Entering directory `/home/alain/t/2010_0915_RT3572_Linux_STA_v2.4.0.2/os/linux'
rm -rf /etc/Wireless/RT2870STA
mkdir /etc/Wireless/RT2870STA
[Code],,,,
so i have no way to get connected to the internet, what is that error cannot stat `rt3572sta.ko': No such file or directory, I think thats why i can make the wireless card work.
View 7 Replies
View Related
Mar 27, 2009
Everything tells me they are in RPMFusion, but for the life of me, I can't locate them...
View 2 Replies
View Related
May 8, 2011
In an attempt to correctly play Half-Life 2 in Wine, I installed the AMD driver downloaded from their site.
Code:
sudo sh ati-driver-installer-11-4-x86.x86_64.run
Reboot. Now, with both FireGL and this running a conflict is created. Naturally the system boots into command prompt. So:
[code]...
Reboot. Got OpenGL, but performance is choppy. Glxgears is very choppy.So how to revert to the old fglrx? There is an uninstall script at /usr/share/ati. Shall I run that or shall I reinstall all of the above removed packages beforehand?
View 5 Replies
View Related
Jun 27, 2010
A few weeks ago either after the upgrade to 10.04 or on a subsequent system update I have been having problems. I have not been able to use Compiz Desktop Effects and playing videos in full screen is awful slow and choppy. I have tried numerous things to try and fix this and now at this point whenever i try anything through the terminal I get the following error.code...
View 5 Replies
View Related
May 2, 2010
After upgrade to Lynx, all of my ATI drivers don't work. Whenever I try to run fglrxinfo I get " Segmentation fault " And for fgl_glxgears I get" Using GLX_SGIX_pbuffer Segmentation fault " For sudo aticonfig --initial -f " Uninitialised file found, configuring.
Using /etc/X11/xorg.conf Saved back-up to /etc/X11/xorg.conf.fglrx-11 " Compiz does not work at all either.
View 1 Replies
View Related
Oct 17, 2010
I am running 8.04 on a Toshiba Satellite A100 laptop. (My Toshiba model is unfortunately the one with the Phoenux BIOS)I have been happy with 8.04 LTS for quite some time now and was thinking of upgrading to 10.04 LTS, which the Update Manager says is available. I normally choose to upgrade a few months after release once things have stabilised a bit. I figured it was now time for 10.04.I accordingly have first taken all the updates for 8.04 and brought it up-to-date. Then when I click on Upgrade, I get the following messageUpgrading may reduce desktop effects and performance in games and other graphically intensive programs.This computer is currently using the AMD 'fglrx' graphics driver. No version of this driver is available that works with your hardwarein Ubuntu 10.04 LTS.
Do you want to continue ?Since I wasn't sure of the exact entire implications, I said NO and exit the upgrade at that point.I then googled a bit and found this to be a pretty serious installation issue with a number of people who unfortunately have ATI display cards.But then I came across this page:Does the above link mean that this problem is now solved with respect to 10.04 as well ?Also, if not, what are the implications for me ? Does this mean I have to be stuck on 8.04 only ?If I choose to upgrade anyway, what display functionality will I lose ?I don't need Desktop Effects or other toys. But I do use GIMP quite a bit and also watch videos in multiple formats. Will I not be able to do these ?
View 9 Replies
View Related
Dec 1, 2010
i have a multi-monitor setup running two ati radeon 4870 cards.
after upgrading to 10.10 from 10.04 fglrx is constantly crashing. it works with some applications such as the browsers chrome, firefox and other applications such as nautilus but if i try to view videos or even open another application i use often keepassx it will crash to a terminal screen.
ubuntu 10.10 is very unusable in this current state, is there a way i can easily revert to 10.04? i have tried the ubuntu provided driver after fully purging fglrx as well as the one provided by ati and to no luck.
View 1 Replies
View Related
Mar 1, 2011
I wouldnt be posting here because I like to solve my problems by myself but I just dont know what else to do. I want to go back to the ubuntu world and I tried Kubuntu. After Installing the Fglrx drivers after a fresh install (10.10 32 bits) through the restricted drivers it shows an ugly font ubuntu loading screen and after that the screen turns "off" (like if there was no signal, the "on/off" light flickers) and it stays like that, but I can use the Ctrl+alt+f1 console. Installing the drivers from ati webiste ends in the same result as before. Downloaded Ubunt 10.10 32 bit and installed it, same results. I have a Radeon HD 3300 integrated. I dont know what to do. The open source drivers works well, but there is no 1280x1024 resolution in the screen manage
View 2 Replies
View Related
Mar 18, 2011
i'm using ubuntu 10.04 LTS and my GTK is amd radeon HD 6850. yesterday, i ran ubuntu 10.10 with the fglrx offic. drivers properly on my native resolution and with 3D acceleration, though i couldn't run my favorite game minecraft, so i tried to reinstall. by this, i accidentally formated my windows partition, so all i've got now are my live cd's and this installation of 9.10, where i downloaded the official drivers what didn't work, then upgraded to 10.04 LTS and can't remove the damn fglrx drivers. the error i get is: [URL]
how to get this working? i love ubuntu, i hate windows, it isn't an option for me to get back to windows, the only way i want to use it is for steam games [by the way, will there be steam for linux?] like cs:s, tf2, dow2, which i dont play that frequently as minecraft [i play this every day, on my fav server majncraft.cz]
View 3 Replies
View Related
Mar 22, 2011
fglrx error - Can't install new updates
View 2 Replies
View Related
Mar 28, 2011
I am running Kubuntu 10.04 LTS and have had no problems with my ATI card up to kernel 2.6.32-29. Upon update/upgrade to 2.6.32-30 the FGLRX driver will not load graphics and I can only get the text system login. If I reboot to -29 everything works great.
View 2 Replies
View Related
Feb 20, 2010
i was recently trying to run some opengl apps on ubuntu, and installed new drivers for intel. The problem is that now, every time it reaches login screen it crashes. I'd like to remove it, but i can't. Recovery console asks for root password. Is there a way to do it from a livecd?
View 1 Replies
View Related
May 5, 2010
Compiz is utterly unusable, ever since probably about 9.04 or 9.10, when Ubuntu took out the Catalyst drivers for my laptop w/ Mobility Radeon HD 2300 their less capable open-source variants, which crashes after about 15 minutes of use.
The screen gradually becomes less responsive for about 5 seconds, until it just completely freezes and becomes completely unresponsive to any keyboard or mouse commands. I tried using the RadeonHD drivers instead and the problem is still there. The 'Hardware Drivers' app in System > Administration doesn't seem to do detect any fglrx drivers for my system.
How would I get some working fglrx drivers back?
And I don't want to use Metacity anymore.
View 8 Replies
View Related
Jun 30, 2010
I have an ATI radeon HD 3400 series video card, and the open-source drivers make my computer run really hot. I tried installing FGLRX by using "Check For New Hardware Drivers", but it did not work, so I installed the ATI catalyst 10.5 package from AMD's website, and am using Xserver-xorg-core-1.7.6-2ubuntu7+backclear1 from k0ekk0ek's PPA so there is no lag when minimizing windows and such.
Everything was perfect until the 2.6.32-23 kernel update came along. I let it update, and rebooted, but the ATI driver no longer starts, even when I uninstall and reinstall it.
I am just using the 2.6.32-22 kernel for now, as the 2.6.32-23 kernel still runs hot without the ATI driver enabled. I would like to start using the new kernel at some point...
View 4 Replies
View Related
Sep 21, 2010
I've just upgraded from ubuntu 9.10 to 10.04 64 bit, and everything went well except for the fglrx driver installation, which failed. I've checked the troubleshooting guide and tried to purge the drivers, with only partial success.
When i type dpkg -l '*fglrx*'
I get this,
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
[code]....
View 7 Replies
View Related
Oct 4, 2010
I need a quick answer if possible, is it better to remove the proprietary drivers before upgrading to 10.04 from 9.10? Or should i have the open source drivers installed? A clean install is not an option on this machine.
View 3 Replies
View Related
Apr 29, 2011
After the installation I have 3 screens setup, on DVI, HDMI (to DVI) and DisplayPort this is using and AMD HD5570 video card. With this configuration mirrored everything is fine and I can see all three displays.However having 3 copies of the same display is worthless, so I want a separate desktop per display.This is when everything goes wrong, after making the change to have 3 displays it fails to work, ie it crashes with the message below (full log is attached as well)Now I can use any 2 monitors independently with the third one mirrored, but I can not have 3 independent monitors configured on the card without X crashing. The exact same config, did work fine in Windows (where I verified the setup).
Backtrace:
[ 352.624] 0: /usr/bin/X (xorg_backtrace+0x26) [0x4a2626]
[ 352.624] 1: /usr/bin/X (0x400000+0x6219a) [0x46219a]
[code]....
View 2 Replies
View Related
May 5, 2011
I have a new installation of 11.04 with an ATI Radeon HD 2400 video card that previously worked fine under an earlier release.
I tried installing the proprietary drivers through the Additional Drivers section, rebooted and the video is choppy (dragging windows, etc).
From other reports around the Internet I've read, it's clear I'm not the only one experiencing this issue.
I tried the manual instructions, which turned out to be a mess and ultimately didn't work, either.
View 3 Replies
View Related
Sep 24, 2010
I run the following file with the >log.log redirector and it does not capture errors.
#!/bin/bash
echo ************************BEGIN LOG******************************
date +"%m/%d/%Y %H:%M:%S $HOSTNAME"
cp -f /scripts/original/clamscans.log /scripts
[code]....
The following errors show up when I run from the file from the term window, but are not written to log.log:
tar: /public/public/clamscans/*.txt: Cannot stat: No such file or directory
tar: Error exit delayed from previous errors
mv: cannot stat `/public/public/clamscans/*.txt': No such file or directory
I know with windows you can add the 2>&1 to capture error data. Is there such a thing for Linux?
View 2 Replies
View Related
Dec 23, 2009
I have been trying to install the FGLRX driver for a Radeon HD 4850. According to this page and others on the web, it says that Xorg 7.5 isn't supported by the driver. I was just wondering is it possible to install Xorg 7.4 on Fedora 12, if not what release of Fedora should I use (i.e does Fedora 11 support Xorg 7.4?)
View 2 Replies
View Related
Aug 13, 2010
I recently upgraded to Lucid (x86_64) on an HP dv2 laptop, and after doing so, the system will not resume after a suspend (with fglrx installed from the "official" repositories). After reading a lot about the problem, I have seen that updating to the latest ATI driver had fixed this issue for some, so I would like to try that.
I am following the guide at at cchtml.
First, I tried installing the Ubuntu-X team's drivers. However, after (successfully) adding their repository, an update does not fetch their packages:
Code:
It looks like both the xorg-edgers and ubuntu-x-swat repositories are being ignored? (If I'm reading that correctly.) If I open the window System->Administration->Software Sources, I can see that the ubuntu-x-swat repository is checked, so I'm confused why it's being ignored.
If I try to demand the fglrx-installer package, I get an error that it cannot find this package.
Code:
I have the same issues for xorg-edgers and ubuntu-x-swat.
Finally, if I try to build the official ATI v10.7 drivers myself, I get an error that Linux is an unrecognized architecture!
Code:
I have installed all preliminary packages suggested in the guide:
Code:
I really can't understand why I'm unable to build the package from ATI myself.
View 3 Replies
View Related
