Ubuntu Installation :: Revert To The Old Fglrx?
May 8, 2011
In an attempt to correctly play Half-Life 2 in Wine, I installed the AMD driver downloaded from their site.
Code:
sudo sh ati-driver-installer-11-4-x86.x86_64.run
Reboot. Now, with both FireGL and this running a conflict is created. Naturally the system boots into command prompt. So:
[code]...
Reboot. Got OpenGL, but performance is choppy. Glxgears is very choppy.So how to revert to the old fglrx? There is an uninstall script at /usr/share/ati. Shall I run that or shall I reinstall all of the above removed packages beforehand?
View 5 Replies
ADVERTISEMENT
Dec 1, 2010
i have a multi-monitor setup running two ati radeon 4870 cards.
after upgrading to 10.10 from 10.04 fglrx is constantly crashing. it works with some applications such as the browsers chrome, firefox and other applications such as nautilus but if i try to view videos or even open another application i use often keepassx it will crash to a terminal screen.
ubuntu 10.10 is very unusable in this current state, is there a way i can easily revert to 10.04? i have tried the ubuntu provided driver after fully purging fglrx as well as the one provided by ati and to no luck.
View 1 Replies
View Related
Feb 22, 2010
i've been using ubuntu with wubi, and I'd like to install it on my new hard drive (so windows is on one hdd and ubuntu is on another). afaik, grub will be installed on the hdd w/ ubuntu, and i have to set it to recognize the other (windows) hdd. assuming that i want to get rid of ubuntu and just use windows, what steps do I have to take to do so? (if grub is only on the ubuntu hdd, then would I just have to format it?)
View 2 Replies
View Related
Jan 7, 2010
Is there an easy way to revert to a previous installation of programs? I installed a couple things and upgraded a couple things that my system didn't like... I could probably try to use /var/log/apt/term.log to try and do it by hand, but is there an automated way to do it?
View 1 Replies
View Related
Jun 16, 2010
I recently upgraded to 10.04 on my older laptop. It's causing some unacceptable slowdown. So I'd like to go back to 09.10.
View 3 Replies
View Related
Aug 15, 2010
I made a usb install drive on a mac by following the instructions on the ubuntu download page, but had problems getting the GRUB loader to run the USB at boot on the DreamLinux PC i wanted to install it on, so I have now sorted access to a CD writer to make a liveCD.
However I need to convert the USB FDD back to just a regular FDD for my mother to use. I am not at all familiar with Macs, or the terminal utilities (though I am able to use the terminal to some degree) so would appreciate help with this procedure or a pointer to some steps to do it.
Currently the drive is named Ubuntu 10.04 LTS when it mounts on mac, before the img write it was just untitled, I cannot delete the ubuntu files from it or write new ones, and I don't know how to do a reformat on a mac.
I need he drive to be able to work again with windows and mac... so will need to reformat to FAT32 I guess?
View 1 Replies
View Related
Nov 28, 2010
Is there a simple way to revert to Lucid from Maverick on NBR? Just twiddling update/packages? Or must change back to lucidI do a whole clean install?
View 3 Replies
View Related
Apr 29, 2011
i feel really stupid for "upgrading" to gnome 3 to try it out and read warnings saying it can mess up your system. i went on thinking oh it'll be fine and the update process messed up or something. now i have a barely functional desktop and just want to go back to unity 11.04. i added the ppa from[URL]
View 3 Replies
View Related
Apr 15, 2010
Since m computer updated FF to 3.6.x FF runs really slowly if a page with java/js or flash opens. It gets so slow I can hardly use it at all. This is a known problem that many people are complaining about, as seen here:
[URL]
I would like to depreciate back to 3.5.8 or 3.5.9 until this issue is resolved, as currently this is preventing me from working the internet on my websites, etc. How can I get a previous version of Firefox to install? Using Jaunty 9.04
View 2 Replies
View Related
Feb 5, 2010
Ever since updating to 9.10 from 9.04 I have been experiencing a logon loop problem. Maybe 1 in 15 tries is successful. When I was able to logon I was not able to mount the multi-boot Hd.. (Windows NTFS, Linux root Sda2, Home Sda3, Swap Sda4, + unallocated space). A error screen told me that I didn't have admin privileges.. Thats incorrect as I'm the only user and logged on at the time. Some other changes I tried also produced the same error. I found some clues on this forum to address the logon issue, and changed my resolution to 1280 x960 and that seems to let me logon each time as needed. But trying to mount the hd still results in the error message.
I cannot use the computer at the current resolution, too hard on the eyes.. (don't know how anyone could). My question is... Since I have the live CD for version 9.04 and that version worked just fine, how should I or do I need to delete ver 9.10 and than reinstall version 9.04? If I run the 9.04 install program will it automatically choose the Sda2 partition, or do I need to precondition and define Sda2 & Sda3, & swap drives again? Will it perform the installation seeing that theres a newer version already on the hd? Also is there a option to uncheck so I won't get any auto-updates because it appears that the newer version is not compatible with my computer.
View 9 Replies
View Related
Mar 19, 2011
I am running Ubuntu 10.10 and I have been keeping it updated via update manager.Last night the update manager popped up and I selected to update all required updates without checking what the updates were.While shutting down I noticed that I needed to reboot to complete the update, so I rebooted.After reboot the wireless network card disappeared. So I moved the PC and plugged in the ethernet cable. Oddly sometimes it shows disconnected for no reason and I have to reboot.What's even worst is that Ubuntu now locks up completely within 15 minutes of a reboot.None of the alt+sysrq commands do anything!How do I find out what the updates were and is there any way to I revert my system back to pre updates without having to reinstall?
View 6 Replies
View Related
May 26, 2010
I have a new ubuntu 10.04 amd64 installation (kernel 2.6.32-22) with a Mobility Radeon HD 3650. I tried to install the fglrx drivers from ati via the Software-Center and via apt-get. After installation, when starting the ATI CCC the following error message (sorry in german) appears:
[code]....
Translation: Driver is either not correctly installed or it does not work properly. If I try to execute fglrxinfo in the console I get a "segmentation fault". I think I do not have to say that the driver does not work. I have removed and reinstalled the driver several times.
View 4 Replies
View Related
Jun 27, 2010
A few weeks ago either after the upgrade to 10.04 or on a subsequent system update I have been having problems. I have not been able to use Compiz Desktop Effects and playing videos in full screen is awful slow and choppy. I have tried numerous things to try and fix this and now at this point whenever i try anything through the terminal I get the following error.code...
View 5 Replies
View Related
May 2, 2010
After upgrade to Lynx, all of my ATI drivers don't work. Whenever I try to run fglrxinfo I get " Segmentation fault " And for fgl_glxgears I get" Using GLX_SGIX_pbuffer Segmentation fault " For sudo aticonfig --initial -f " Uninitialised file found, configuring.
Using /etc/X11/xorg.conf Saved back-up to /etc/X11/xorg.conf.fglrx-11 " Compiz does not work at all either.
View 1 Replies
View Related
Oct 17, 2010
I am running 8.04 on a Toshiba Satellite A100 laptop. (My Toshiba model is unfortunately the one with the Phoenux BIOS)I have been happy with 8.04 LTS for quite some time now and was thinking of upgrading to 10.04 LTS, which the Update Manager says is available. I normally choose to upgrade a few months after release once things have stabilised a bit. I figured it was now time for 10.04.I accordingly have first taken all the updates for 8.04 and brought it up-to-date. Then when I click on Upgrade, I get the following messageUpgrading may reduce desktop effects and performance in games and other graphically intensive programs.This computer is currently using the AMD 'fglrx' graphics driver. No version of this driver is available that works with your hardwarein Ubuntu 10.04 LTS.
Do you want to continue ?Since I wasn't sure of the exact entire implications, I said NO and exit the upgrade at that point.I then googled a bit and found this to be a pretty serious installation issue with a number of people who unfortunately have ATI display cards.But then I came across this page:Does the above link mean that this problem is now solved with respect to 10.04 as well ?Also, if not, what are the implications for me ? Does this mean I have to be stuck on 8.04 only ?If I choose to upgrade anyway, what display functionality will I lose ?I don't need Desktop Effects or other toys. But I do use GIMP quite a bit and also watch videos in multiple formats. Will I not be able to do these ?
View 9 Replies
View Related
Mar 1, 2011
I wouldnt be posting here because I like to solve my problems by myself but I just dont know what else to do. I want to go back to the ubuntu world and I tried Kubuntu. After Installing the Fglrx drivers after a fresh install (10.10 32 bits) through the restricted drivers it shows an ugly font ubuntu loading screen and after that the screen turns "off" (like if there was no signal, the "on/off" light flickers) and it stays like that, but I can use the Ctrl+alt+f1 console. Installing the drivers from ati webiste ends in the same result as before. Downloaded Ubunt 10.10 32 bit and installed it, same results. I have a Radeon HD 3300 integrated. I dont know what to do. The open source drivers works well, but there is no 1280x1024 resolution in the screen manage
View 2 Replies
View Related
Mar 18, 2011
i'm using ubuntu 10.04 LTS and my GTK is amd radeon HD 6850. yesterday, i ran ubuntu 10.10 with the fglrx offic. drivers properly on my native resolution and with 3D acceleration, though i couldn't run my favorite game minecraft, so i tried to reinstall. by this, i accidentally formated my windows partition, so all i've got now are my live cd's and this installation of 9.10, where i downloaded the official drivers what didn't work, then upgraded to 10.04 LTS and can't remove the damn fglrx drivers. the error i get is: [URL]
how to get this working? i love ubuntu, i hate windows, it isn't an option for me to get back to windows, the only way i want to use it is for steam games [by the way, will there be steam for linux?] like cs:s, tf2, dow2, which i dont play that frequently as minecraft [i play this every day, on my fav server majncraft.cz]
View 3 Replies
View Related
Mar 22, 2011
fglrx error - Can't install new updates
View 2 Replies
View Related
Mar 28, 2011
I am running Kubuntu 10.04 LTS and have had no problems with my ATI card up to kernel 2.6.32-29. Upon update/upgrade to 2.6.32-30 the FGLRX driver will not load graphics and I can only get the text system login. If I reboot to -29 everything works great.
View 2 Replies
View Related
Mar 27, 2009
Everything tells me they are in RPMFusion, but for the life of me, I can't locate them...
View 2 Replies
View Related
Feb 20, 2010
i was recently trying to run some opengl apps on ubuntu, and installed new drivers for intel. The problem is that now, every time it reaches login screen it crashes. I'd like to remove it, but i can't. Recovery console asks for root password. Is there a way to do it from a livecd?
View 1 Replies
View Related
May 5, 2010
Compiz is utterly unusable, ever since probably about 9.04 or 9.10, when Ubuntu took out the Catalyst drivers for my laptop w/ Mobility Radeon HD 2300 their less capable open-source variants, which crashes after about 15 minutes of use.
The screen gradually becomes less responsive for about 5 seconds, until it just completely freezes and becomes completely unresponsive to any keyboard or mouse commands. I tried using the RadeonHD drivers instead and the problem is still there. The 'Hardware Drivers' app in System > Administration doesn't seem to do detect any fglrx drivers for my system.
How would I get some working fglrx drivers back?
And I don't want to use Metacity anymore.
View 8 Replies
View Related
Jun 30, 2010
I have an ATI radeon HD 3400 series video card, and the open-source drivers make my computer run really hot. I tried installing FGLRX by using "Check For New Hardware Drivers", but it did not work, so I installed the ATI catalyst 10.5 package from AMD's website, and am using Xserver-xorg-core-1.7.6-2ubuntu7+backclear1 from k0ekk0ek's PPA so there is no lag when minimizing windows and such.
Everything was perfect until the 2.6.32-23 kernel update came along. I let it update, and rebooted, but the ATI driver no longer starts, even when I uninstall and reinstall it.
I am just using the 2.6.32-22 kernel for now, as the 2.6.32-23 kernel still runs hot without the ATI driver enabled. I would like to start using the new kernel at some point...
View 4 Replies
View Related
Sep 21, 2010
I've just upgraded from ubuntu 9.10 to 10.04 64 bit, and everything went well except for the fglrx driver installation, which failed. I've checked the troubleshooting guide and tried to purge the drivers, with only partial success.
When i type dpkg -l '*fglrx*'
I get this,
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
[code]....
View 7 Replies
View Related
Oct 4, 2010
I need a quick answer if possible, is it better to remove the proprietary drivers before upgrading to 10.04 from 9.10? Or should i have the open source drivers installed? A clean install is not an option on this machine.
View 3 Replies
View Related
Apr 29, 2011
After the installation I have 3 screens setup, on DVI, HDMI (to DVI) and DisplayPort this is using and AMD HD5570 video card. With this configuration mirrored everything is fine and I can see all three displays.However having 3 copies of the same display is worthless, so I want a separate desktop per display.This is when everything goes wrong, after making the change to have 3 displays it fails to work, ie it crashes with the message below (full log is attached as well)Now I can use any 2 monitors independently with the third one mirrored, but I can not have 3 independent monitors configured on the card without X crashing. The exact same config, did work fine in Windows (where I verified the setup).
Backtrace:
[ 352.624] 0: /usr/bin/X (xorg_backtrace+0x26) [0x4a2626]
[ 352.624] 1: /usr/bin/X (0x400000+0x6219a) [0x46219a]
[code]....
View 2 Replies
View Related
May 5, 2011
I have a new installation of 11.04 with an ATI Radeon HD 2400 video card that previously worked fine under an earlier release.
I tried installing the proprietary drivers through the Additional Drivers section, rebooted and the video is choppy (dragging windows, etc).
From other reports around the Internet I've read, it's clear I'm not the only one experiencing this issue.
I tried the manual instructions, which turned out to be a mess and ultimately didn't work, either.
View 3 Replies
View Related
Aug 13, 2010
I recently upgraded to Lucid (x86_64) on an HP dv2 laptop, and after doing so, the system will not resume after a suspend (with fglrx installed from the "official" repositories). After reading a lot about the problem, I have seen that updating to the latest ATI driver had fixed this issue for some, so I would like to try that.
I am following the guide at at cchtml.
First, I tried installing the Ubuntu-X team's drivers. However, after (successfully) adding their repository, an update does not fetch their packages:
Code:
It looks like both the xorg-edgers and ubuntu-x-swat repositories are being ignored? (If I'm reading that correctly.) If I open the window System->Administration->Software Sources, I can see that the ubuntu-x-swat repository is checked, so I'm confused why it's being ignored.
If I try to demand the fglrx-installer package, I get an error that it cannot find this package.
Code:
I have the same issues for xorg-edgers and ubuntu-x-swat.
Finally, if I try to build the official ATI v10.7 drivers myself, I get an error that Linux is an unrecognized architecture!
Code:
I have installed all preliminary packages suggested in the guide:
Code:
I really can't understand why I'm unable to build the package from ATI myself.
View 3 Replies
View Related
Dec 23, 2009
I have been trying to install the FGLRX driver for a Radeon HD 4850. According to this page and others on the web, it says that Xorg 7.5 isn't supported by the driver. I was just wondering is it possible to install Xorg 7.4 on Fedora 12, if not what release of Fedora should I use (i.e does Fedora 11 support Xorg 7.4?)
View 2 Replies
View Related
Apr 20, 2011
Can I use the current FGLRX drivers with a Mobility Radon X2300 card on an HP6910p with Lucid?
View 2 Replies
View Related
