Ubuntu Installation :: Manual Fglrx Install - System Will Not Resume After A Suspend

Aug 13, 2010

I recently upgraded to Lucid (x86_64) on an HP dv2 laptop, and after doing so, the system will not resume after a suspend (with fglrx installed from the "official" repositories). After reading a lot about the problem, I have seen that updating to the latest ATI driver had fixed this issue for some, so I would like to try that.

I am following the guide at at cchtml.

First, I tried installing the Ubuntu-X team's drivers. However, after (successfully) adding their repository, an update does not fetch their packages:

Code:

It looks like both the xorg-edgers and ubuntu-x-swat repositories are being ignored? (If I'm reading that correctly.) If I open the window System->Administration->Software Sources, I can see that the ubuntu-x-swat repository is checked, so I'm confused why it's being ignored.

If I try to demand the fglrx-installer package, I get an error that it cannot find this package.

Code:

I have the same issues for xorg-edgers and ubuntu-x-swat.

Finally, if I try to build the official ATI v10.7 drivers myself, I get an error that Linux is an unrecognized architecture!

Code:

I have installed all preliminary packages suggested in the guide:

Code:

I really can't understand why I'm unable to build the package from ATI myself.

View 3 Replies


ADVERTISEMENT

Fedora :: ATI Catalyst 9.x Fglrx Driver Manual Install On 11?

Aug 21, 2009

UPDATE 8/28/2009: I now recommend that people install the new packages instead of the manual instructions below, see this link:http://forums.fedoraforum.org/showthread.php?t=155503 (Howto for fglrx/catalyst (Ati driver) and Compiz-fusion)NOTE: After installing the packages, I had to do the things at the following link to make the above packages work:http://forums.fedoraforum.org/showpo...postcount=3564If you still want to install the driver manually (you do not need to if you install the packages above), the instructions are below:

Fedora 11 ATI fglrx driver manual install notes
Updated: 10/12/2009
========================================

[code]....

View 14 Replies View Related

Ubuntu Installation :: ATI/fglrx, Doesn't Work Properly With 11.04 Manual Or Pkg?

May 5, 2011

I have a new installation of 11.04 with an ATI Radeon HD 2400 video card that previously worked fine under an earlier release.

I tried installing the proprietary drivers through the Additional Drivers section, rebooted and the video is choppy (dragging windows, etc).

From other reports around the Internet I've read, it's clear I'm not the only one experiencing this issue.

I tried the manual instructions, which turned out to be a mess and ultimately didn't work, either.

View 3 Replies View Related

Fedora :: System Degraded After Resume From Suspend

Jun 17, 2011

I am having a problem with suspend in F15. While the computer enters and resumes from suspend extremely fast (basically instantaneous), the whole system seems sluggish and unresponsive afterwards. The mouse cursor is lagging and some key strokes are omitted when typing. The animations in Gnome 3 are also very non-fluid compared to how they were before suspend. The only way I have found to return to normal operation is to reboot the computer. I have tried 32 and 64-bit versions of Fedora 15 with the problem existing in both. I also tried the latest version of openSuse (Gnome 2.32) just to see if this problem persisted and I can confirm that it did. Perhaps this indicates a kernel-related problem that should be reported as a bug somewhere else?

lspci:
Code:
00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11)
00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11)
00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11)
00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11)
00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11) .....

View 3 Replies View Related

Debian Configuration :: Fglrx System Hang On Screen Suspend

Aug 18, 2015

My system is hanging on screen suspension... And its not the usual hang on "sleep" or others similars, it will happen by only having the screen on stand-by ( eg xset +dpms)...

If I leave for a while the screen will shutdown as expected but computer will completely hang after an indefinite time, it will not respond to outside connections and the will be spinning faster than usual...

Only workaround is to have the screen power save option disabled, in my case, on the KDE settings...

I have tried the most common solution to have "nomodeset" as a kernel option to disable mode setting, but this doesn't seem to work...

Also tried to forcebly reproduce the issue with Code: Select allxset force dpms standby/suspend/off but nothing happens like that...

This issue also only appears with the fglrx driver, open-source works well.

View 0 Replies View Related

Debian Configuration :: System Upgrade => No Network After Suspend And Resume?

Aug 7, 2011

Lately I upraded my Debian using aptitude update/aptitude upgrade - including installing a new kernel (3.0). Since this upgrade I have strange problem with networking. When I suspend my computer and resume it, I do not have connectivity with network:

$ ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
From 192.168.1.1 icmp_seq=1 Destination Host Unreachable

[code]....

View 2 Replies View Related

CentOS 5 :: Lock Screen After System Resume From Suspend / Hibernation?

Mar 21, 2009

For the sake of security, I want the screen to be locked after the system is resumed from suspend or hibernation. Now the only way I can do this is to check the options "Lock screen when screen saver is active." in the screensaver preference. But this method is annoying since I have to type the password to quit the screensaver. Is there other way to do this? Thanks.

By the way, I use CentOS 5.2 x86_64.

Leonard
2009-3-21

View 1 Replies View Related

CentOS 5 Hardware :: System Did Not Appear To Resume Correctly From Suspend / Hibernate

Feb 19, 2011

i dont know why my system dosnt resume from suspend sstate.i it goes in suspend state.it doesnt resume .i have to poweroff then restart it again.and when i get logged in it gives me Following Error: Resume problem: Your system did not appear to resume correctly from Suspend/Hibernate. This may be a driver problem or a hardware problem. Check the GNOME Power Manager Manual for common problems.

do you think it is because of batterry.i have a problem in my By Battery .IN DOS operating system.when i check my battery icon . A red Cross constantly blink on lower right side of the battery and it says (your Battery consider Replacing).i have notice one thing .And My battery timing hias become Decreased. Do you think this Resume problm is cause of battery problm.Or there is some problm in my Os software.

View 3 Replies View Related

Ubuntu :: Desktop System (P55-USB3 + Core I7 + 10.10) Fails To Suspend / Resume From Memory

Nov 27, 2010

I have a desktop system (P55-USB3 + Core i7 + Ubuntu 10.10) that fails to suspend/resume from memory. So I'm trying to diagnose the problem. The first obstacle was easy enough --- when I put the system to sleep to memory, the computer comes back alive right away. A look at /var/log/kern.log revealed that one USB device (usb10) failed to suspend, and from there I was able to pin it down to the USB3 controller in the BIOS. Disabled that and this problem disappeared.

Now, I'm stuck with the second obstacle. The computer successfully goes into the suspend mode, but it hangs during resume. The monitor doesn't get any video signal, and it fails to respond to ping (netconsole doesn't work either.) After a forced reboot (that involves unplugging the power cable), /var/log/kern.log doesn't contain any interesting entries. All the pm_test modes from freezer to core succeed (I followed [URL] I've also tried pm_trace (https://wiki.ubuntu.com/DebuggingKernelSuspend) but again kern.log nor dmesg contains anything after the suspend. Either the write didn't survive the forced power off, or the resume is failing even before that. The motherboard doesn't have a serial port nor firewire, so getting kernel logs through them is not a possibility, either.

View 3 Replies View Related

CentOS 5 :: Graphics Card Can't Work After The System Resume From 'suspend' Mode

May 18, 2009

My computer have ATI X600 graphics card installed, and I installed CentOS5.3.

Every time I suspend my computer and then resume it, it seem the graphics card can't resume and the monitor says 'no signal', but the system still responses, I can use keyboard.

Is there any configuration I can't do to make it resume normally? I've searched a lot in Google but can't find out any one else run into the same problem.

Information about the card:

Quote:

View 5 Replies View Related

OpenSUSE Install :: Freeze On Resume From Suspend To RAM?

Mar 29, 2011

There is an intermittent problem with resuming from s2ram. Occasionally, the power button is pressed to resume, the screensaver comes on but the animation is frozen along with the mouse and KB. Sometimes the desktop will show although with the same frozen condition. My swap parition is 2GB. I read in the forums that a small swap partition may cause a somewhat similar condition. I also read a recommendation to disable powersaving and screensaver, again not for my exact symptoms. I would like to find the root cause even if it takes some doing. Otherwise, the system rocks (except Amarok never worked but Kaffeine works for sound). Here are the system specs:

openSUSE 11.3 x86_64
KDE 4.4.4. rel 3
HP xw9400 Workstation AMD 64 Opteron
OCZ Vertex 60GB (dedicated system drive-single boot)

[code]....

View 9 Replies View Related

OpenSUSE Install :: 11.2 - Keyboard Not Working After Resume From Suspend To RAM

Nov 15, 2009

When I resume my system after choosing the "Suspend to RAM" option, the login prompt appears but the keyboard doesn't work at all. (Caps/Num/Scroll don't light up either) The mouse, however, works fine and I'm able to click on the on-screen elements. Since I'm not able to login, I'm forced to reboot and abort the session. Note that this does NOT happen with the "Suspend to Disk" feature. (ie, it works fine).

System Specs:

openSUSE 11.2 KDE4.3 x86_64 (updated)
Sony VAIO VGN-CS17G

View 6 Replies View Related

Debian Installation :: Suspend / Resume / Restore Services Under Systemd On Jessie

May 11, 2015

Fixing my chronic suspend/resume problems turned out to be easier under systemd, but like everything else lacks documentation.

To suspend rather than power off when pressing the power button, I edited /etc/systemd/login.conf

uncommenting this line and changing it to suspend:
HandlePowerKey=suspend

and uncommenting the line
HandleLidSwitch=suspend

Some services were lost on resume. This problem seems common. To run a command on resume, I believe you have to make your own script, and create a systemd file to run it.

My script is /home/james/.bin/james-resume.service, which contains:

#! /bin/sh
/sbin/hdparm -B 255 /dev/sda

This must be executable. Ownership doesn't seem to matter.

To run it, I made a file in /etc/systemd/systen/suspend.target.wants
The file name must match the script name:
/etc/systemd/system/suspend.target.wants/james-resume.service

This contains:

[Unit]
Description=Run James jobs at resume
After=suspend.target
After=hibernate.target
After=hybrid-sleep.target

[Service]
ExecStart=/bin/bash /home/james/.bin/james-resume.service
[Install]
WantedBy=suspend.target
WantedBy=hibernate.target
WantedBy=hybrid-sleep.target

Ownership must be root.root. Apparently it doesn't need to be executable.

Then enable with:
sudo systemctl enable james-resume.service

and check with:
sudo systemctl status james-resume.service

If it says the service is loaded, it's OK -- inactive only means it's done running.

View 7 Replies View Related

Ubuntu :: Can't Resume From Suspend?

Apr 6, 2010

My laptop won't resume after it suspends. It works fine under win 7 so it's not the hardware. The light says it's on and it's pretty much a blank screen. I'm not sure whether it's operational but the screen is off. It has exactly the same resault a waiting for the blank screen except it won't go back on.

View 9 Replies View Related

Ubuntu :: 10.04 Log Out When Resume From Suspend?

May 6, 2010

I've just upgraded from 9.10 to 10.04 via the upgrade manager. Prior to the upgrade I was able to suspend and hibernate without any problems. Now that I have upgraded to 10.04, I can suspend however when I resume I am back at the gdm login prompt, logging in again with a new session.Having just done another test whilst writing this, it actually appears that if I select suspend from the top right I am suspended and can resume my session. If I close the lid on my laptop (which is supposed to suspend) I am logged out and suspended.Also, Hibernate doesn't work as well - sometimes it never actually hibernates (just sits on a black screen) and sometimes it doesn't resume (it's never hibernated and resumed correctly since the upgrade)

View 9 Replies View Related

Ubuntu :: Laptop Will Not Resume After Suspend

Apr 22, 2010

Whatever way I suspend my laptop (menu, keyboard shortcut, close lid), it seems to suspend just find (no panic lights, suspend LED indicator flashing as expected). However, when i try to resume, the laptop seems to begin the proper wakeup process (for example, the DVD-drive is tested), there's a lot of HDD activity for about 5 seconds, screen does not power on, and then the laptop just shuts off.

System setup:
lucid beta 2, fully updated (just check now)
LG E-500 laptop /w nvidia gforce mobile 8400G
bios version 1.17 from June 2007 (not sure this is important)

Things I tried:
* Completely remove anything to do with gpu drivers and installed nvidia-current driver.
* Suspend stress test described here. this didn't work at all. The first test failed (with ac adapter attached) and the second test suspended but didn't automatically resume (see "the behavior" above). Also, when I booted up again, no apport bug report is created. I tried both with rtc set to utc=yes and utc=no. with utc=yes, the second test did automatically resume, but the same problem happened (laptop shutdown while resuming).
* The debugging steps described here, but I couldn't get the "no_console_suspend" option to work. I tried adding both "no_console_suspend" and "no_console_suspend=1" (without quotes) to the boot script in the grub menu, but when I did pm-suspend in tty1, the laptop really did suspend. I would like to try to do this again if someone could explain how to add this option.

Notes:
* Not sure this is relevant, but when I boot up after a failed resume attempt, wireless network is disabled (this only happens after a failed resume!!!).
* I found a package called nvram-wakeup in synaptic that seems to be related to this. This package is not installed. Should I install it?
In case this is relevant, forgot to mention I'm running ubuntu in dual-boot along side windows7.

View 6 Replies View Related

Ubuntu :: Desktop Will Not Resume From Suspend 9.10 Or 10.04

Apr 25, 2010

I don't have any problems with 9.04 at all with suspend & resume just shutdown (wont power off usb saitek keyboard & razer mouse) but i don't care for that I prefer suspend & resume. However trying 9.10 suspend works while resume gets a black screen & locks up. Now on 10.04 it will suspend very fast but will not power up from resume keyboard & usb power is turned off thats what I can't figure out I have checked bios & changes settings after settings & nothing happens. I know in windows everything works but i do not want windows at all I prefer linux (ubuntu). In my asus eee pc 1001p suspend & resume works with both 9.10 & 10.04.

View 7 Replies View Related

Ubuntu :: No Screen When Resume From Suspend?

May 21, 2010

When I close my laptop lid (it goes into suspend mode). When I open it again, I can't see anything but a black screen. I have to reset the computer manually to accessUbuntu again.On a related note probably.. for 'some' screensavers, when I click to re-access my desktop, the screensaver freezes, but I can't see the unlock dialogue. I can however still type my password and it will unlock, I just can't see what I'm doing

View 2 Replies View Related

Ubuntu :: Resume From Suspend Without Password?

May 29, 2010

in kubuntu how can i resume from suspend without password? it annoys the crap out of me i have been looking all over and cant find anything in settings to do this

View 3 Replies View Related

Ubuntu :: Resume From Suspend Not Working 9.10?

Jul 31, 2010

Karmic 2.6.31-22-generic, Asus M3N78-EM, MCE remote with USB/IR dongle, latest Bios, Bios PM enable and set for suspend S3. IT will suspend but I need to depress case power button for it to resume. I want to use my remote control, I also can not get it to resume from Keyboard/mouse (See Note Below). Only suspend and power button work.

$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

[code]....

View 1 Replies View Related

Ubuntu :: USB Keyboard Locks Up After Resume From Suspend

Feb 20, 2010

When I suspend my computer and then resume later in the day my USB keyboard locks up. The only way I have found to reset the keyboard is to disconnect the USB cable from the USB port and then reconnect it.

View 9 Replies View Related

Ubuntu :: Computer Will Not Resume From Hibernate/suspend?

Apr 7, 2010

I just got a Dell Inspiron 1764 and am dual booting it with Win7 and Ubuntu 9.10.Whenever I hibernate or suspend, it goes through everything fine, but then when I resume it just boots to a black screen and I have to do a hard shutdown. Is there a fix for this? I know it's a fairly common issue.

View 1 Replies View Related

Ubuntu :: Thinkpad - No Suspend / Hibernate Or Resume

May 9, 2010

I've got a Thinkpad X31 with ATI M6 Ly card. Since Karmic, and Lucid, I get no suspend/hibernate/resume. If/when I select resume or close the lid, Lucid goes through the suspend cycle, and for approximately half a second it actually seems to go into suspend, then the screen comes back on, black, but definitely on, and absolutely no response to any keyboard input - have to hard-shutdown by holding down the power button. I've read that the problem is with the Ubuntu kernel, and that installing/compiling 2.6.33 fixes the issue, but causes other ones.

View 4 Replies View Related

Debian :: Suspend To Ram - Resume Bug In Squeeze?

Mar 10, 2010

I have an issue with my Sony vaio fw31e not resuming from suspend. Reported this as a bug: [URL] The usual ways of suspending, from the kde 4 menu, from the power/battery widget or by lid closing always result in no resume. However, running pm-suspend from a root terminal suspends and resumes just fine. My question is, how does one delve into the way that the usual methods initiate suspend? Maybe if I could find out what each of these methods actually does, I may be able to see what is going wrong? I had been running squeeze on this lappy since July 2009 with no suspend issues until an update broke it sometime in January. The install is being fully upgraded every day at the moment.

View 11 Replies View Related

Fedora :: Suspend / Resume With F14 Radeon Kms?

Nov 13, 2010

It all works if I boot my self compiled vanilla 2.6.35-rc3 though. The environment

Sony vaio VGN-SR21M 4GBRAM P8400, ATI HD3400 mobility. I use

kernel-2.6.35.6-45.fc14.x86_64
xorg-x11-drv-ati.x86_64-6.13.1-0.3.20100705git37b348059.fc14

If I suspend my notebook it starts the usual slow orange blinking indicating the suspend mode got reached. There is also evidence in the various log files that this works. If I try to resume it hangs a for 3 seconds and then I get the hdd-password screen from my bios and the notebook boots from zero. I couldn't find anything in /var/log/messages nor dmesg. If I first boot to windows (grub 2nd partition) and then restart and boot to linux, all the suspend works fine

View 1 Replies View Related

Fedora :: Resume From Suspend Without A Password?

Jun 22, 2011

how do i disable the screen lock after i wake my computer from suspend? i would prefer to be able to just wake the computer up and have it go right to the desktop, without having to enter a password. i used to use ubuntu until today, and i remember having to run "gconf-editor" and then switching off on "lock_on_suspend" under apps/gnome-power-management from the menu that popped up. i tried to run "gconf-editor" in fedora 15, but that doesn't appear to exist. i've searched around and haven't been able to find an answer, so i'm wondering if anybody knows what to do?

View 3 Replies View Related

OpenSUSE Hardware :: Suspend And Resume In 11.2 And KDE 4.3

Mar 3, 2010

I've upgraded 4 boxes (32- and 64-bit) from Suse 11.1 to 11.2 with no unresolvable issues. Now I'm stuck with my 5th box, a Dell Dimension 8400 desktop box (yes, an old brick, 32-bit). I can suspend to RAM ("suspend") and to disk ("hibernate") fine, but resume seems to fail. In Suse 11.1 I used kpowersave (GUI in the sys tray) to suspend to RAM. For some reason, it couldn't suspend to disk but that didn't bother me. kpowersave relies on the powersaved running.

Note I had upgraded my 11.1 installation to all shiny and new KDE 4.3 stuff, and while KDE 4.3 seems not to use powersaved (and thus kpowersave) all worked fine. Upgrading to 11.2 has removed kpowersave and powersaved. I don't mind switching to another way if only I could find documentation what's being used on KDE 4.3 (and/or Suse 11.2). All I find by googling is that the daemon used is powerdevil, and that I should use a GUI for suspending (this battery monitoring plasma app).

Well, if I do that on this box it simply does -- nothing. So I tried s2ram and a2disk directly:Running s2ram with the --force option works, but the box doesn't resume. Goes on, screen stays blank, mouse and keyboard don't work. s2disk complains about not being able to "stat the resume device file". I gave it the --resume_device /dev/sda6 option, and it hibernated fine. But it doesn't resume. Pressing the power on button just starts Suse anew (and recovers the file system journals, so I assume it thinks it has crashed before).

So I think I have 2 questions:
What the heck does Suse 11.2 use for suspend/hibernate and resume? Is there any how-to available to learn what I need to configure?
Why can't I resume from successful s2ram or s2disk operations? /var/log/pm-suspend-log or pm-powersave-log don't provide any clues.

View 9 Replies View Related

Slackware :: 13.1 - Suspend / Resume With 2 Different Laptops

May 29, 2010

Laptop 1 is an acer aspire 5570. closing and opening the lid works a few times, after editing acpi_handler.sh, and battery life reporting is ok during this time. then, for no apparent reason, the laptop no longer responds to the lid closing, and no longer seems to be able to read the battery charge state. once this has occurred, the computer will also no longer restart, it tries a few times, with lights flashing and the hd making ugly noises. the only way to extricate the computer from this state is to pull and reinsert the battery.

Laptop 2 is a gateway nv18. suspend/resume with the lid are ok, mostly. the issure here is no display at all in x. but the computer does respond to ctrl-alt-backspace to kill x, with the command prompt returning. still not good. I'm trying a fresh install on the gateway, to see if this was just an installation glitch.
Both laptops performed flawlessly in 13 otherwise.

View 9 Replies View Related

CentOS 5 :: Fail To Resume From Suspend?

Jul 12, 2011

I've been trying to find an answer to the following problem : whenever my PC is put in Suspend/Hibernate mode, it fails to recover when pushing the power button. This happens both with automatic suspend or manual suspend. I've been reading this problem, and mine is quite similar, but no solution is given.

uname -rmi
2.6.18-194.11.4.el5 x86_64 x86_64
PS: this computer is not connected to Internet, no update possible.

View 1 Replies View Related

Ubuntu Multimedia :: No Audio After Suspend And Resume On Laptop?

Jan 2, 2010

I just upgraded to 9.10 (Karmic Koala) on a Dell laptop. Now when I close the laptop lid to suspend and then open it to resume, the audio disappears; have to reboot to get the audio back. I remember having this problem a while ago back on Hardy Heron and finding a kludge to fix it - a line inserted in a shell script that gets invoked on resume

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved